FED-STD-123 Revision H:2007
Current
Current
The latest, up-to-date edition.
Marking for Shipment (Civil Agencies)
Available format(s)
PDF
Language(s)
English
Published date
08-08-2007
Publisher
€16.67
Excluding VAT
1. SCOPE
2. REFERENCE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. CONCLUDING MATERIAL
Specifies requirements for marking unit, intermediate and transport packages, and unit loads.
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This document establishes requirements for marking of unit, intermediate, transport packages, and unit loads for shipments of purchased commodities (items) from government contractors or vendors to ordering civil agency activities. Marking requirements of this standard apply only for shipments to civil agencies and GSA retail operations.
| ASTM F 1145 : 2005 : R2011 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| ASTM E 785 : 1981 : R2006 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM A 392 : 2011 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| SAE AMSLP390A | Plastic, Modling and Extrusion Material Polyethylene and Copolymers (Low, Medium, and High Density) |
| LLL-A-650 Revision D:1989 | ARCH AND CLIP BOARD FILES, COMPOSITION HARDBOARD BACK (S/S BY A-A-2894) |
| W-R-36 Revision D:1983 | RACEWAY AND FITTINGS, METALLIC, UNDERFLOOR |
| ASTM C 725 : 1990 : R2014 | Standard Specification for Semidense Mineral Fiber Siding (Withdrawn 2019) |
| ASTM B 91 : 2017 : REDLINE | Standard Specification for Magnesium-Alloy Forgings |
| ASTM B 403 : 2012 : REDLINE | Standard Specification for Magnesium-Alloy Investment Castings |
| O-F-499 Revision D:1985 | Flux, Brazing, (Silver Brazing Filler Metal, Low Melting Point) |
| O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION (S/S BY A-A-1427) |
| ASTM C 663 : 1998 : R2008 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| DDD-P-46 Revision D:1975 | PACK, GAUZE, ABDOMINAL (S/S BY A-A-54555) |
| AA C 30 : D | CABINET, KEY, (BOXES AND RACKS METAL AND IDENTIFICATION SYSTEMS) |
| ZZ E 00661 : F (1) NOTICE 2 | ERASERS, RUBBER AND RUBBER SUBSTITUTE |
| WW-C-624 Revision E:1983 | COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION) (S/S BY A-A-59614) |
| RR-W-410 Revision H:2015 | Wire Rope and Strand |
| GGG-C-1520 Base Document:1965 | CARRIER TOOL (NO S/S DOCUMENT) |
| ASTM A 159 : 1983 : R2006 | Standard Specification for Automotive Gray Iron Castings |
| ASTM C 221 : 1998 : R2003 : EDT 1 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| ASTM C 221 : 1998 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| RR-B-00300 Base Document:1966 | Binder, Note Pad, Spring-Back (S/S by A-A-2653) |
| O-L-298 Revision B:1969 | LITHOGRAPHIC BLANKET-ROLLER WASH (NO S/S DOCUMENT) |
| PPP E 1533 : B NOTICE 1 | ENVELOPES, PACKAGING, CUSHIONED |
| P-C-111 Revision D:1977 | Carbon Removing Compound (No S/S Document) |
| PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
| ASTM B 236 : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| AA-C-2786 Base Document:2004 | Cabinet, Security, Information Processing System Storage, Class 5 |
| PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED-PLYWOOD (S/S BY ASTM-D6251) |
| RR-F-191 Revision K:1990 | FENCING, WIRE AND POST METAL (AND GATES, CHAIN-LINK FENCE FABRIC, AND ACCESSORIES) (GENERAL SPECIFICATION) |
| JJ-N-171 Revision C:1977 | NET, INSECT (S/S BY A-A-54688) |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| DDD-C-001799 Base Document:1972 | CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION (NO S/S DOCUMENT) |
| ASTM A 795/A795M : 2013 : REDLINE | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| GG-L-261 Revision D:1984 | LEVELS, SURVEYING: LOCATORS, HAND-TYPE (S/S BY A-A-52299) |
| GGG-M-125-7 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PESTICIDES AND ORGANIC VAPORS) (NO S/S DOCUMENT) |
| GG-G-91 Revision D:1972 | Gages, Tire Pressure, Self Contained and Inflator-Gage, Pneumatic Tire (S/Sby A-A-59568) |
| O-D-825 Revision C:1973 | DUPLICATING FLUID, DIRECT PROCESS (SPIRIT TYPE) |
| ASTM A 823 : 1999 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| A-A-59885 Base Document:2012 | Corrosion Prevention Compound (CPC) |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| BB-H-1168 Revision D:2010 | Helium, Technical |
| DDD-B-1022 Revision A:1975 | BLANKET, BED (THERMAL TYPE), COTTON (S/S BY ASTM-D5432) |
| A-A-2765 Base Document:1991 | Pencil, Mechanical for 1/1 MM Lead Size (S/S by A-A-2908) |
| MMM-A-132 Revision B:1994 | Adhesives, Heat Resistant, Airframe Structural, Metal to Metal |
| O-N-350 Revision C:1991 | NITRIC ACID, TECHNICAL (S/S BY A-A-59105) |
| L-P-535 Revision E:1979 | Plastic Sheet (Sheeting): Plastic Strip: Poly (Vinyl Chloride) and Poly (Vinyl chloride-Vinyl Acetate), Rigid |
| MMM-A-1617 Revision B:1995 | ADHESIVE, RUBBER BASE, GENERAL PURPOSE |
| ASTM D 2683 : 2014 : REDLINE | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
| TT-P-595 Revision A:1972 | Preservative Coating, Canvas |
| GGG-V-790 Revision E:1992 | VULCANIZERS, HOT PATCH AND PLATE, INNER TUBE (NO S/S DOCUMENT) |
| ASTM A 853 : 2004 | Standard Specification for Steel Wire, Carbon, for General Use |
| A-A-2753 Base Document:1991 | Ink, Black, for Duplicating Process (No S/S Document) |
| ASTM B 211 : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| MIL-DTL-12000 Revision K:2012 | Cable, Cord, and Wire, Electric, Packaging of |
| TT-M-261 Revision D:1970 | Methyl Ethyl Ketone, Technical (S/S by ASTM-D740) |
| GGG-S-282 Revision E:1983 | SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) (S/S BY A-A-50459) |
| AA-C-571 Revision H:1993 | Cot, Folding |
| O-R-1151 Revision B:1969 | Regenerator, Lithographic Blanket (No S/S Document) |
| BB-N-411 Revision C:1973 | Nitrogen, Technical (S/S by A-A-59503 and A-A-59155) |
| J-W-1177 Revision B:1988 | WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION (S/S BY NEMA-MW1000) |
| FF-B-575 Revision C:1970 | Bolt, Hexagon and Square |
| GGG-P-323 Revision C:1962 | Pick, Ice (S/S by A-A-631) |
| O-C-1824 Base Document:1973 | CLEANING COMPOUND, SOLVENT, HEAVY DUTY, LIQUID (NO S/S DOCUMENT) |
| O-B-420 Revision C:1976 | Bleach, Laundry, Organic Chlorine (No S/S Document) |
| ASTM C 1448/C1448M : 2005 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| PPP-P-225 Revision C:1974 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, GENERAL OFFICE, STEEL (NO S/S DOCUMENT) |
| MIL-S-51421 Base Document:1976 | SCREENING, CHEMICAL BIOLOGICAL FILTER (NO S/S DOCUMENT) |
| PPP-P-001938 Base Document:1976 | PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED (NO S/S DOCUMENT) |
| PPP-G-2919 Base Document:1997 | GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF (NO S/S DOCUMENT) |
| CCC-P-86 Revision E:1971 | Padding, Cotton, Stitched Roving (S/S by A-A-50166) |
| O-A-548 Revision D:1974 | Antifreeze/Coolant, Engine: Ethylene Glycol, Inhibited, Concentrated (S/S by A-A-870) |
| L-F-475 Revision A:1965 | Floor Covering Vinyl, Surface (Tile and Roll), with Backing (No S/S Document) |
| GGG-B-0060 Revision A Interim Revision:1966 | Bag, Tool Satchel (No S/S Document) |
| GGG-L-001345 Base Document:1967 | LEAD JOINT RUNNER (NO S/S DOCUMENT) |
| GGG-F-570 Revision A:1966 | FORCEPS, SHEET HOLDER (S/S BY A-A-3087) |
| GG-F-00336 Revision G:1976 | FILE AND REAMER, PULP CANAL, DENTAL, STANDARDIZED (S/S BY A-A-54024) |
| O-C-291 Revision B:1983 | Chloroform, Technical (No S/S Document) |
| ASTM A 623M : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements [Metric] |
| UU-P-553 Revision C:1976 | PAPER, WRAPPING, TISSUE (S/S BY A-A-1249) |
| ASTM E 785 : 1981 : R2001 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE (S/S BY A-A-59545) |
| KK-L-271 Revision H:1976 | LEATHER, CATTLEHIDE, STRAP, VEGETABLE-TANNED (S/S BY MIL-DTL-32068) |
| PPP-F-690 Revision D:1981 | FROZEN FRUIT, FROZEN FRUIT JUICES, AND FROZEN VEGETABLES, PACKAGING OF (NO S/S DOCUMENT) |
| DDD-C-001023 Base Document:1966 | CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER) (NO S/S DOCUMENT) |
| PPP-P-1656 Base Document:1974 | PACKING AND PACKAGING, FLUORESCENT LIGHT FIXTURES (NO S/S DOCUMENT) |
| QQ-S-781 Revision H:1974 | STRAPPING, STEEL, AND SEALS (S/S BY ASTM-D3953-87) |
| ASTM A 232/A232M : 2005 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| K-P-146 Revision E:1979 | Tarpaulin, Cotton Duck, Fire, Water, Weather and Mildew Resistant (S/S by MIL-DTL-32063) |
| P-C-438 Revision A Base Document:1963 | Cleaning Compound, Optical Lens (No S/S Document) |
| U-B-50 Revision A:1976 | BACITRACIN AND NEOMYCIN SULFATE OINTMENT (S/S BY A-A-54680) |
| MMM A 178 : A | ADHESIVE, PAPER LABEL, WATER RESISTANT |
| ASTM C 428/C428M : 2005 : R2011 : EDT 1 | Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe |
| TT-L-50 Revision G:1976 | LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSAL (IN PRESSURIZED DISPENSERS) (NO S/S DOCUMENT) |
| MIL-O-51401 Base Document:1974 | OVERBOOT, PLASTIC FILM (NO S/S DOCUMENT) |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| GG-C-131 Revision C:1977 | CASSETTES, RADIOGRAPHIC FILM (MEDICAL) (S/S BY A-A-53327) |
| TT-W-156 Revision B:1972 | Water-Repellent Compound, Textile Finish |
| QQ-A-200 Revision E:1980 | Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube and Wire, Extruded; General Specification for (Refer to ASTM-B241/B241M, ASTM-B221, ASTM-B308/B308M and SAE-AMS-QQ-A-200) |
| GG-R-550 Revision B:1981 | Rods, Stadia Folding, with Case (S/S by A-A-50211) |
| ASTM D 2282 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
| GG-C-2736 Revision A:1987 | Catheter, Cardiovascular (Flow Directed, Thermodilution) (S/S by A-A-54829) |
| O-C-265 Revision C:1991 | CHEMICALS, ANALYTICAL; GENERAL SPECIFICATION FOR (S/S BY A-A-59282) |
| DDD-W-80 Revision E:1987 | Washcloth, Terry, Cotton (S/Sby A-A-55303) |
| PPP-P-1132 Revision C:1983 | PACKAGING OF WOOLEN, WORSTED AND WOOL BLEND (SYNTHETIC FIBER; COTTON) FABRICS (NO S/S DOCUMENT) |
| AA-W-001950 Base Document:1975 | Wardrobe with Accessory Pieces, Wood, Steel Frame (No S/S Document) |
| SS-S-200 Revision E:1984 | Sealants, Joint, Two-Component, Jet-Blast-Resistant, Cold-Applied, for Portland Cement Concrete Pavement (No S/S Document) |
| QQ-A-225 Revision G:1990 | ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, OR SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED; GENERAL SPECIFICATION FOR (S/S BY ASTM-B211 AND SAE-AMS-QQ-A-225) |
| SS-S-1614 Revision A:1984 | Sealants, Joint, Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Tar Concrete Pavements (No S/S Document) |
| ASTM F 1673 : 2010 | Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ASTM A 48/A48M : 2003 : R2008 | Standard Specification for Gray Iron Castings |
| ASTM C 220 : 1991 : R2015 | Standard Specification for Flat Asbestos-Cement Sheets (Withdrawn 2021) |
| BB-A-1034 Revision B:1985 | COMPRESSED AIR, BREATHING |
| ASTM B 102 : 2000 : R2005 | Standard Specification for Lead- and Tin-Alloy Die Castings (Withdrawn 2011) |
| MIL-P-14790 Base Document:1968 | Plastic Sheet and Strip (Polyolefin) (for use in Ammunition) (No S/S Document) |
| GGG-C-291 Revision A:1963 | CHALK LINE AND REEL (SELF-CHALKING) |
| JJJ-L-821 Revision A:1969 | LITHOGRAPHIC PLATE PRESERVING GUM (NO S/S DOCUMENT) |
| TT-A-511 Revision E:1992 | AMYL ACETATE, TECHNICAL (S/S BY A-A-59132) |
| ASTM F 794:2003 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
| QQ-A-1876 Base Document:1974 | ALUMINUM FOIL |
| FF-B-584 Revision F:1989 | Bolts, Square Neck and Tee Head (S/Sby ASME-B18.5, ASME-B18.9,and ASME-B18.18.1M) |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE (GENERAL SPECIFICATION) (S/S BY A-A-59588) |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| HH-I-1972 Base Document:1981 | INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE (S/S BY ASTM-C1289) |
| GGG-H-496 Revision C:1961 | HOE, GARDEN, MORTAR, AND MORTAR MIXING (S/S BY A-A-2977) |
| MMM-A-179 Revision B:1982 | ADHESIVE: PAPER LABEL (S/S BY A-A-3006) |
| P-D-410 Revision C:1977 | Dishwashing Compound, Hand, (Synthetic Detergent, Solid and Liquid Foam) |
| ASTM F 1348/F1348M : 1991 : R2007 | Standard Specification for Pneumatic Rotary Descaling Machines |
| GGG-E-936 Revision C:1967 | EXTRACTOR, SCREW (STUD AND PIPE), AND EXTRACTOR, TAP (S/S BY A-A-3021, A-A-3022 AND A-A-3023) |
| SS-C-661 Revision A:1974 | CRAYON, MARKING |
| PPP-B-1358 Revision A:1973 | BAG, COTTON DUCK (S/S BY A-A-301) |
| DDD-B-151 Revision J:1988 | Bedspread, Cotton, Polyester, Cotton/Rayon, Cotton/Polyester or Polyester/Rayon Blend (S/S by A-A-50864) |
| MIL C 39028 : C | CAPACITORS, PACKAGING OF |
| PPP-P-50 Revision A:1970 | Packaging and Packing of Thread for Domestic and Overseas Shipment (No S/S Document) |
| KK-L-165 Revision C:1964 | Leather, Cattlehide, Vegetable-Tanned and Chrome Retanned, Impregnated, and Soles |
| PPP-S-760 Revision B:1973 | STRAPPING, NONMETALLIC (AND CONNECTORS) (S/S BY ASTM-D3950-87) |
| GGG-W-686 Revision C:1969 | WRENCH, TORQUE, UNIDIRECTIONAL (S/S BY GGG-W-2843 AND ASME-B107.14M) |
| JJ-W-155 Revision H:1988 | Webbing, Textile, (Cotton, Elastic) |
| GGG-E-00930 Base Document:1963 | EXTRACTOR, ELECTRON TUBE (TONG TYPE) (S/S BY A-A-2972) |
| HH-G-101 Revision E:1990 | GASKET, METALLIC-ENCASED (S/S BY SAE-AMS-HH-G-101) |
| DDD R 306 : B | RIBBONS, TELETYPEWRITER, RECORD |
| QQ-B-637 Revision A:1967 | Brass, Naval: Rod, Wire, Shapes, Forgings, and Flat Products with Finished Edges (Bar, Flat Wire, and Strip) (S/S by Portions of ASTM-B21,and ASTM-B21M, ASTM-B124and ASTM-B283) |
| GGG-P-463 Revision C:1973 | Plate, Surface, (Granite) (Inch and Metric) |
| P-B-172 Revision B:1973 | BELTS AND BANDS, ABRASIVE (COATED CLOTH, POWER MACHINE) (S/S BY A-A-1014) |
| MIL V 51195 : B | VALVE, OUTLET, C19 |
| EE-E-911 Revision G:1971 | EXTRACTS, FLAVORING: AND FLAVORS (S/S BY A-A-20167) |
| AAA-B-105 Revision B:1970 | BALANCE, PRESCRIPTION (NO S/S DOCUMENT) |
| GG-T-380 Base Document:1958 | THIMBLE, EXTRACTION (S/S BY A-A-53766) |
| L P 00665 : A NOTICE 1 | PROTECTOR, DUPLICATING STENCIL |
| AA-O-00235 Base Document:1962 | OFFICE FURNITURE, STEEL, SECTIONAL (NO S/S DOCUMENT) |
| GGG-P-446 Revision A:1964 | PLATE, LAPPING (S/S BY A-A-51141) |
| TT-P-85 Revision E:1977 | PAINT, TRAFFIC AND AIRFIELD MARKING, SOLVENT BASE (S/S BY TT-P-1952 OR A-A-2886) |
| HH-I-558 Revision C:1992 | INSULATION, BLANKETS, THERMAL (MINERAL FIBER, INDUSTRIAL TYPE) (S/S BY ASTM-C612, ASTM-C553, ASTM-C592, AND ASTM-C547) |
| SS-C-466 Revision E:1964 | Cloth, Thread, and Tape-Asbestos (S/S by ASTM-D1571 and ASTM-D315) |
| AA-V-200 Revision A:1965 | Venetian Blinds (No S/S Document) |
| GG M 181 : D | MEASURER, MAP |
| NNN-C-688 Base Document:1962 | CRUCIBLE, IGNITION, LABORATORY, METAL (NO S/S DOCUMENT) |
| P-S-651 Revision E:1974 | SODIUM ORTHOSILICATE, TECHNICAL (S/S BY A-A-1498) |
| GGG-P-655 Revision B:1964 | PRICKER, SAILMAKER\'S (NO S/S DOCUMENT) |
| AA-C-001779 Revision G:1996 | FILLING CABINET, STEEL, LATERAL AND FRONT TO BACK FILING, LEGAL AND LETTER SIZE MATERIAL, GENERAL OFFICE (S/S BY A-A-3187) |
| QQ-S-626 Revision C:1976 | Steel Plate, Alloy (Structural Quality) (S/S by ASTM-A829) |
| OO-D-2854 Base Document:1994 | DITCHING MACHINE, WHEEL TYPE TRENCHER, CRAWLER-MOUNTED, DIESEL-ENGINE-DRIVEN (NO S/S DOCUMENT) |
| MIL-V-51496 Base Document:1983 | VOICEMITTER OUTLET VALVE ASSEMBLY (NO S/S DOCUMENT) |
| GG D 00458 : C | DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE |
| NNN-D-345 Revision A:1963 | DISH, EVAPORATING, PLATINUM (S/S BY ASTM-E786) |
| TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL (S/S BY A-A-59107) |
| GGG-B-376 Revision B:1963 | BIT, SCREW-DRIVER, (TAPERED SQUARE SHANK, FLAT TIP AND CROSS TIP) (NO S/S DOCUMENT) |
| O-S-801 Revision F:2001 | Sulfuric Acid, Electrolyte (for Storage Batteries) |
| O-S-639 Revision B:1984 | Sodium Phosphate, Dibasic, Anhyrdous, Technical (S/S By MIL-DTL-32598) |
| GG S 776 : C | STRAIGHTEDGE, STEEL, DRAFTSMEN |
| W-R-175 Revision D:1986 | REEL AND HUB FOR MAGNETIC RECORDING TAPE, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
| L-S-125 Revision B:1972 | Screening, Nonmetallic, Insect (No S/S Document) |
| KKK-W-291 Revision G:2016 | Wheelbarrows (Future acquisitions for this material should refer to A-A-3135) |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| MIL-STD-1428 Base Document:1981 | CLEANING COMPOUNDS (NO S/S DOCUMENT) |
| WW-H-001220 Base Document:1966 | HEAD SPRINKLER (UNDERGROUND CONNECTED) (S/S BY A-A-2862) |
| L-F-001641 Base Document:1971 | FLOOR COVERING, TRANSCLUCENT OR TRANSPARENT VINYL SURFACE WITH BACKING (NO S/S DOCUMENT) |
| ASTM C 1449/C1449M : 2005 : REV A | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| AA-F-001165 Revision B Interim Revision:1989 | FURNITURE, METAL FRAME, LAMINATED PLASTIC SURFACED PANELS, CASE GOODS AND TABLES (NO SS DOCUMENT) |
| PPP E 540 : C NOTICE 1 | ENVELOPE, WATER RESISTANT, FOR PACKING, LISTS AND SHIPPING DOCUMENTS |
| FF F 111 : E | FASTENERS, PAPER, METALLIC, COMPRESSOR TYPE |
| QQ-W-345 Revision B:1965 | WIRE, ELECTRICAL, STEEL, COPPER-COVERED (S/S BY ASTM-B227) |
| GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) (NO S/S DOCUMENT) |
| GG-B-636 Revision B:1960 | BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE (NO S/S DOCUMENT) |
| GGG-C-00413 Base Document:1964 | CLAMPING TOOL, STRAP BAND, HOSE (S/S BY A-A-2591) |
| MIL-A-46099 Revision C:1987 | ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE) |
| GG D 475 : A | DIVIDER, SPACING, EQUAL |
| MIL C 51280 : B NOTICE 1 | COVER, VOICEMITTER-OUTLET VALVE, C13R1 |
| TT-F-325 Revision A:1965 | Filler, Engraving, Stamped Marking |
| GGG-N-185 Revision A:1964 | NEEDLE, CABLE LACING (NO S/S DOCUMENT) |
| L-P-516 Revision A:1967 | Plastic Sheet and Plastic Rod, Thermosetting, Cast |
| GG-H-00582 Revision A:1967 | HOLDER, PATIENT\'S BED TRAY CARD (S/S BY MIL-H-42077) |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| KK-B-151 Revision H:1977 | Belt, Lineman\'s, and Strap, Pole Lineman\'s Type(S/S by A-A-1776, A-A-1977) |
| GG-M-001371 Base Document:1978 | MALLET, PLUGGING, DENTAL (NO S/S DOCUMENT) |
| GGG-T-2761 Base Document:1991 | TONGS, MATERIAL LIFTING, PIPE (S/S BY A-A-59228) |
| MIL-DTL-19491 Revision J:2014 | Semiconductor Devices, Packaging of |
| J-L-231 Revision C:1987 | LEADS, STORAGE-BATTERY (S/S BY A-A-59215) |
| JJ-B-191 Revision A:1967 | Belting, Flat, Conveyor or Power Transmission, Cotton (Solid Woven) (No S/S Document) |
| NNN-T-785 Revision B:1969 | TUBE, CENTRIFUGE (PLASTIC) (NO S/S DOCUMENT) |
| PPP-B-576 Revision C:1993 | BOXES, WOOD-CLEATED PANELBOARD (S/S BY ASTM-D6251) |
| PPP-B-591 Revision B:1971 | BOXES, SHIPPING, FIBERBOARD, WOOD-CLEATED (S/S BY PPP-B-576) |
| GG-X-635 Revision D:1963 | X-RAY APPARATUS SET, RADIOGRAPHIC AND FLUOROSCOPIC, MEDICAL (NO S/S DOCUMENT) |
| L-P-1041 Revision A:1973 | PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER (NO S/S DOCUMENT) |
| MIL-F-51369 Revision B:1979 | Filters Gas: Recirculation (550 CFM and 1200 CFM) (No S/S Document) |
| MIL-V-0010134 Revision E:1974 | VALVE, OUTLET, CHEMICAL-BIOLOGICAL MASK, C15 (NO S/S DOCUMENT) |
| LLL-B-810 Revision B:1973 | Building Board, (Hardboard) Hard Pressed, Vegetable (S/S by ANSI-A135.4) |
| L-H-490 Revision B:1992 | Holder, Card-Label, (Plastic) (S/S by A-A-3115) |
| GGG-E-950 Revision A:1988 | EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER), AND EXTRACTOR, LANTERN GLAND (NO S/S DOCUMENT) |
| GGG-A-926 Revision C:1961 | Ax, (Single Bit, Double Bit, Pick Head and Mattock Head) (No S/S Document) |
| GGG-S-0075 Revision A:1966 | SAW SET, HAND (S/S BY A-A-2968) |
| O-C-110 Revision C:1984 | Calcium Hydroxide, Technical (S/S by A-A-55821) |
| AA-T-00670 Base Document:1964 | TRAY, STATIONARY, METAL, FOR STEEL DESK (NO S/S DOCUMENT) |
| GGG M 00100 : 0 | MARLINESPIKE (MANILA ROPE) |
| TT-P-641 Revision G:1976 | Primer, Paint, Zinc Dust-Zinc Oxide (for Galvanized Surfaces) (S/S by MIL-DTL-24441/20) |
| L-C-001369 Base Document:1969 | CUSHION, CARPET AND RUG, BONDED URETHANE (NO S/S DOCUMENT) |
| GG-P-001264 Base Document:1967 | PENPOINTS AND PENHOLDER, CROWQUILL (NO S/S DOCUMENT) |
| ZZ-G-710 Revision B:1993 | Gasket Material, Rubber 35 Durometer Hardness |
| AASHTO M 54M/M 54 : 2007 : R2012 | SPECIFICATION FOR WELDED DEFORMED STEEL BAR MATS FOR CONCRETE REINFORCEMENT |
| AASHTO M 329M/M 329 : 2011 | SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM D 2464 : 2015 : REDLINE | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM C 508/C508M : 2000 : R2009 : EDT 1 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| AASHTO M 329M/M 329 : 2011 : R2015 | SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT |
| AASHTO M 221M/M 221 : 2009 : R2013 | SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT, DEFORMED, FOR CONCRETE |
| SAE AMSWWT700B | Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for |
| ASTM A 864/A864M : 1990 | Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997) |
| ASTM B 127 : 2005 : R2014 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ASTM B 127 : 2005 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| SAE AMSQQA367E | Aluminum Alloy Forgings |
| ASTM A 48/A48M : 2003 : R2016 | Standard Specification for Gray Iron Castings |
| ASTM A 500 : 2003 : REV A | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM C 1447 : 2004 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM F 878 : 1995 | Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000) |
| ASTM E 786 : 1981 : R2001 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM F 2881 : 2011 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM D 1527 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) |
| ASTM C 1450/C1450M : 2004 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM D 3261 : 2016-11 | SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING |
| ASTM A 135/A135M : 2009 : R2014 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 686 : 1992 : R2010 | Standard Specification for Tool Steel, Carbon |
| ASTM C 223 : 1998 : R2014 | Standard Specification for Asbestos-Cement Siding (Withdrawn 2019) |
| ASTM D 3034 : 2016 : REDLINE | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| ASTM A 47/A47M : 1999 : R2004 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A 230/A230M : 2005 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 48/A48M : 2003 : R2012 | Standard Specification for Gray Iron Castings |
| ASTM F 1281 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM A 905 : 2004 : R2010 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM F 409 : 2017 : REDLINE | Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| ASTM A 809 : 2008 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM A 47M : 1990 | Standard Specification for Ferritic Malleable Iron Castings [Metric] |
| ASTM A 121 : 2013 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM B 491/B491M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM E 323 : 2011 | Standard Specification for Perforated-Plate Sieves for Testing Purposes |
| ASTM A 159 : 1983 : R2011 | Standard Specification for Automotive Gray Iron Castings |
| ASTM F 2806 : 2010 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 892 : 1995 | Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001) |
| ASTM C 725 : 1990 : R2003 | Standard Specification for Semidense Mineral Fiber Siding |
| ASTM A 511/A511M : 2016 : REDLINE | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar |
| ASTM F 1183 : 1996 : R2002 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM A 752M : 2004 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| ASTM A 47/A47M : 1999 : R2009 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A 1085/A1085M : 2015 : REDLINE | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| ASTM A 1069/A1069M : 2016 : REDLINE | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes |
| ASTM A 600 : 1992 : REV A : R2010 | Standard Specification for Tool Steel High Speed |
| ASTM F 2762 : 2011 : EDT 1 | Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016) |
| ASTM F 2763 : 2016 : REDLINE | Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
| ASTM E 785 : 1981 : R2011 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM C 222 : 1997 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM C 659 : 1990 : R2008 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM C 296/C296M : 2000 : R2009 : EDT 1 | Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM A 996/A996M : 2016 : REDLINE | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
| SAE AMS QQ A 200 : 2004 | ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
| ASTM D 2680 : 2001 : R2014 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM F 2969 : 2012 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe |
| ASTM A 834 : 1995 : R2001 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 794 : 2003 : R2014 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
| ASTM C 725 : 1990 : R1998 | Standard Specification for Semidense Mineral Fiber Siding |
| ASTM C 875 : 1998 : R2008 | Standard Specification for Asbestos-Cement Conduit |
| ASTM B 163 : 2011 : R2017 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM F 2829 : 2010 | Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ASTM A 854/A854M : 2008 : R2017 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM F 1360 : 2017 : REDLINE | Standard Specification for Ovens, Microwave, Electric |
| ASTM F 1145 : 2005 : R2017 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| ASTM C 663 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM E 786 : 1981 : R2006 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM F 2307 : 2003 | Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011) |
| ASTM B 317/B317M : 2007 : R2015 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM F 2658 : 2007 : R2019 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
| ASTM A 834 : 1995 : R2015 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 2986 : 2012 | Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| ASTM C 663 : 1998 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM C 668 : 1998 : R2014 | Standard Specification for Asbestos-Cement Transmission Pipe (Withdrawn 2019) |
| AA-D-2757 Base Document:1990 | DOOR, VAULT, SECURITY (NO S/S DOCUMENT) |
| J-C-580 Revision B:1974 | Cord, Electrical and Wire, Electrical (0- to 600- Volt Service) (S/Sby UL62) |
| HH-I-595 Revision C:1976 | INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADHESIVE, PLASTIC (S/S BY A-A-55809) |
| AA-C-2859 Base Document:1994 | Cabinet, Security, Weapons Storage |
| W-E-00661 Revision B:1999 | Eraser, Electric (No S/S Document) |
| MIL-S-21472 Revision C:1988 | SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR (S/S BY NASM21472) |
| GG S 001090 : A | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, SINGLE COMPRESSOR, MOBILE, 110 VOLT, 60 CYCLE, AC: (FOR EAR, NOSE AND THROAT PROCEDURES) |
| J-L-2744 Base Document:1990 | LEADS, ELECTRICAL, ARC-WELDING (NO S/S DOCUMENT) |
| GG-S-00795 Revision B:1990 | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, DOUBLE COMPRESSOR, MOBILE, 115 VOLT; 60 CYCLE, AC (WITH ETHER VAPORIZER) (NO S/S DOCUMENT) |
| J-C-1270 Revision B:1973 | Cable Assembly, Power, Electrical |
| GG-I-446 Revision E:1978 | ILLUMINATOR, X-RAY FILM (S/S BY A-A-51091 AND A-A-51092) |
| KKK-T-2807 Base Document:1992 | TRUCKS, LUBRICATING AND FUEL SERVICING 4 BY 2 AND 4 BY 4 (NO S/S DOCUMENT) |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEG. C) (S/S BY J-STD-004, J-STD-005 AND J-STD-006) |
| F-F-2790 Base Document:1991 | Filter, Air-Extended Area, Initial installation (S/S by A-A-50554) |
| GG-S-1554 Base Document:1973 | Stamp, Time (No S/S Document) |
| W-J-800 Revision F:1992 | Junction Box: Extension, Junction Box; Cover, Junction Box (Steel, Cadmium, or Zinc-Coated) (S/S by A-A-59214) |
| AA-F-363 Revision C:1990 | Filing Cabinet, Security, Maps and Plans, General Filing, and Storage |
| FF-L-2937 Base Document:2005 | Combination Lock, Mechanical |
| OO W 00860 : E | WASHING MACHINE AND DRYING TUMBLERS, HOUSEHOLD LAUNDRY, POWER OPERATED AND LAUNDRY COMMERCIAL (SELF-SERVICE) |
| W-F-406 Revision E:1993 | Fittings for Cable, Power, Electrical and Conduit, Metal Flexible (A-A-50552) |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY (NO S/S DOCUMENT) |
| W-S-610 Revision E:1990 | SPLICE CONNECTORS (S/S BY A-A-59213) |
| W-F-408 Revision E:1989 | FITTINGS FOR CONDUIT, METAL, RIGID, (THICK-WALL AND THIN-WALL (EMT) TYPE) (S/S BY A-A-50553) |
| BB-E-2879 Revision A:2001 | Extinguisher, Fire, Carbon Dioxide (CO2), Portable, with Mounting Bracket, for Aviation Use |
| NNN-O-001191 Base Document:1966 | OVEN, LABORATORY (NO S/S DOCUMENT) |
| AA-V-2737 Base Document:1990 | Modular Vault Systems |
| J-C-30 Revision B:1989 | CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION) (S/S BY A-A-59544) |
| JJ-N-180 Revision H:2015 | Nets, Laundry |
| W-P-115 Revision C:1990 | PANEL, POWER DISTRIBUTION (NO S/S DOCUMENT) |
| AA-S-1518 Revision A:1970 | SAFE, TOOL-RESISTANT, UNINSULATED, SECURITY (NO S/S DOCUMENT) |
| SAE AS 6228 : 2014 | SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS |
| AA-D-600 Revision D:2000 | Door, Vault, Security |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) (NO S/S DOCUMENT) |
| PPP-B-1672 Revision E:2013 | Boxes, Shipping, Reusable with Cushioning |
| AA-V-2940 Base Document:2008 | Vault System, Armory, Assembled |
| GG-G-76 Revision E:1980 | GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR-STREAM, OIL, WATER, AMMONIA, CHLORO FLUORO HYDROCARBON GASES AND COMPRESSED GASES) (S/S BY ANSI 40.1 1985) |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| L-P-509 Revision A:1965 | PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING (S/S BY ASTM-D709) |
| ASTM E 786 : 1981 : R1996 : EDT 1 | Standard Specification for Dishes, Evaporating, Platinum |
| W-D-661 Revision E:1995 | DRILLS, ELECTRIC, PORTABLE (EXCLUSIVE OF HIGH FREQUENCY TYPES) AND STAND, PORTABLE ELECTRIC DRILL, VERTICAL (NO S/S DOCUMENT) |
| A-A-2780 Base Document:1992 | Type Cleaner (No S/S Document) |
| TT-C-621 Revision B:1973 | CORRECTION FLUID, DUPLICATING MACHINE STENCIL |
| QQ-S-681 Revision F:1974 | Steel Castings (See Notice 1 for Replacement Info) |
| C-F-160 Revision C:1970 | Feather, Waterfowl, and Down, Waterfowl (No S/S Document) |
| ASTM A 1095 : 2015 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| MIL-D-51388 Revision A:1979 | Detector Cell, Chemical Agent (No S/S Document) |
| WW-H-1053 Revision A:1987 | HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, AND CORROSION-RESISTANT AND HEAT-RESISTANT STEEL) (S/S BY A-A-59452) |
| GG-T-35 Revision C:1989 | TABLES; DRAWING, TRACING, AND SCRIBING (NO S/S DOCUMENT) |
| ASTM A 635/A635M : 2015 : REDLINE | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| AA-B-260 Revision F:1975 | Bedspring, Box Type (S/S by ASTM-F1085) |
| MIL-C-10382 Revision D:1983 | Corrosion Preventive, Petrolatum, Spraying Application: for Food Handling Machinery and Equipment |
| QQ C 591 : E NOTICE 1 | COPPER SILICON, COPPER ZINC SILICON, AND COPPER NICKEL SILICON ALLOYS, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE |
| MIL-W-71125 Base Document:1992 | WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE (S/S BY A-A-59276) |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS\'; HANDSHIELD, WELDING; AND PLATES, WELDING (S/S BY ANSI-Z87.1) |
| ASTM B 317/B317M : 2007 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| G-E-550 Revision C:1985 | ENVELOPE, PHOTOGRAPHIC NEGATIVE, PAPER (S/S BY A-A-54939) |
| O-C-303 Revision D:1985 | CHROMIUM TRIOXIDE, TECHNICAL (S/S BY A-A-55827) |
| MIL-S-15204 Revision D:1984 | Sealing Compound, Joint and Thread, High Temperature |
| PPP-P-1136 Revision D:1986 | PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS (NO S/S DOCUMENT) |
| ASTM A 135 : 2005 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| PPP-C-1683 Revision A:1988 | Cushioning Material, Expanded Polystyrene Loose-Fill Bulk (for Packaging Application) (No S/S Document) |
| GGG-M-125-3 Revision A:1982 | Respirator Assemblies, Air Line, with Disposable Hood (Supplied Air) (No S/S Document) |
| GGG-M-125 Revision G:1985 | Respirator and Respirator Assemblies: AirLine; Non-Powered Air Purifying and Powered Air-Purifying (No S/S Document) |
| TT-L-47 Revision C:1976 | LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER (S/S BY A-A-713) |
| ASTM B 791 : 1997 | Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Withdrawn 1999) |
| GG-T-671 Revision F:1981 | TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE, AND NONADJUSTABLE (GENERAL SPECIFICATION) (NO S/S DOCUMENT) |
| ASTM B 127 : 2005 : R2009 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| GGG-M-125-2 Revision A:1982 | Respirator Assemblies, Air Line, with Helmet (Supplied Air) (No S/S Document) |
| A-A-2785 Base Document:1992 | Pencil, Drafting (No S/S Document) |
| AASHTO M 203M/M 203 : 2012 | SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR CONCRETE REINFORCEMENT |
| AASHTO M 334M/M 334 : 2017 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN CHROMIUM ALLOYED, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| GGG-M-125-4 Revision C:1985 | Respirator Assembly: Half Mask, Air-Purifying , Chemical Cartridge (for Organic Vapors) (No S/S Document) |
| GGG-D-650 Revision B:1967 | DRILL, MASONRY, ROTARY DRIVEN (CORELESS) |
| PPP-P-291 Revision E:1976 | PAPERBOARD, WRAPPING AND CUSHIONING (S/S BY A-A-1051) |
| HH-F-341 Revision F:1973 | Filler, Expansion Joint, Bituminous (Asphalt and Tar) and Nonbituminous (Preformed for Concrete) |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK (NO S/S DOCUMENT) |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| EE-I-116 Revision E:1972 | ICE CREAM, ICE MILK AND SHERBET, REGULAR AND MELORINE OR MELORINE TYPES, ICES AND NOVELTIES (NO S/S DOCUMENT) |
| QQ-S-700 Revision D:1977 | STEEL SHEET AND STRIP, MEDIUM AND HIGH CARBON (S/S BY SAE-AMS-QQ-S-700) |
| QQ-T-830 Revision A:1961 | Tube, Steel, (Carbon. Mechanical; Seamless and Welded) (S/S by ASTM-A512, ASTM-A513 and ASTM-A519) |
| QQ-F-461 Revision C:1968 | Floor, Plate, Steel, Rolled |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| GG T 416 : A | TIMER, INTERVAL, SPRING-DRIVEN, PHOTOGRAPHIC |
| FF-L-2740 Revision A:1997 | Locks, Combination, Electromechanical |
| QQ-W-461 Revision H:1978 | Wire, Steel, Carbon (Round, Bare, and Coated) (S/S byASTM-A853, ASTM-A818, ASTM-A641 AND ASTM-A809) |
| O-L-164 Revision D:1970 | LEATHER DRESSING, MILDEW PREVENTIVE (NO S/S DOCUMENT) |
| ASTM B 865 : 2004 : R2010 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| RR-P-1352 Revision C:1989 | PARTITIONS, TOILET, COMPLETE (S/S BY A-A-60003) |
| HH-I-1972-3 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE INSULATION BOARD ON ONE SIDE AND ASPHALT/ORGANIC FELT OR ASPHALT/GLASS FIBER FELT ON THE OTHER SIDE OF THE FOAM (NO S/S DOCUMENT) |
| UU-P-268 Revision G:1973 | Paper, Kraft, Wrapping (S/S by A-A-203 and A-A-1894) |
| GGG-W-00649 Base Document:1966 | Wrench, Plier; Clamp, Plier; and Plier, Tubing Pinch (No S/S Document) |
| DDD-S-281 Revision K:1978 | Sheet, Bed, Cotton, and Polyester Cotton (S/S by A-A-1433) |
| HH-I-1972-1 Base Document:1981 | INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE (NO S/S DOCUMENT) |
| SS-S-169 Revision B:1975 | SEALER, JOINT, SEWER, MINERAL-FILLED, HOT-POUR (NO S/S DOCUMENT) |
| GG-T-00311 Revision B:1967 | THERMOMETERS, SELF-INDICATING, MERCURY IN GLASS (FEVER) (NO S/S DOCUMENT) |
| GG-V-350 Base Document:1990 | VIEWER, DENTAL RADIOGRAPHIC FILM, 110 VOLT, AC-DC (S/S BY A-A-51010) |
| ASTM C 875 : 1998 : R2014 | Standard Specification for Asbestos-Cement Conduit (Withdrawn 2019) |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) (S/S BY A-A-2786, TT-P-664) |
| F-B-2835 Base Document:1995 | BOILER, STEAM, LOW PRESSURE, FIRETUBE (NO S/S DOCUMENT) |
| GG-D-635 Revision D:1984 | DRAWING BOARD AND DRAWING BOARD TRESTLES (S/S BY A-A-52301) |
| KK-I-570 Revision D:1990 | INSOLE, FOOTWEAR, LEATHER, CATTLEHIDE (NO S/S DOCUMENT) |
| PPP-P-1133 Revision C:1983 | PACKAGING OF SYNTHETIC FIBER FABRICS (S/S BY FED-STD-802) |
| W-B-411 Revision A:1961 | Blasting Machine, Galvanometer, Blasting, Resistor Assembly |
| GGG-M-125-11 Revision A:1982 | RESPIRATOR ASSEMBLY, HELMET WITH POWERED AIR PURIFYING UNIT (PORTABLE BACK&PACK) (NO S/S DOCUMENT) |
| MIL-L-0050064 Revision F:1977 | Lens, Ophthalmic, Simple (No S/S Document) |
| SS-S-1996 Base Document:1976 | SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES (NO S/S DOCUMENT) |
| GG-S-161 Revision D:1985 | Scales, Drafting, and Scales, Plotting (General Specification) (S/S by A-A-59269) |
| L-P-398 Revision B:1973 | PLASTIC MOLDING MATERIAL, STYRENE-BUTADIENE (S/S BY ASTM-D4549) |
| QQ-A-371 Revision F:1971 | ALUMINUM ALLOY INGOT (FOR REMELTING) (S/S BY ASTM-B179) |
| QQ-A-596 Revision E:1981 | Aluminum Alloy Permanent and Semipermanent Mold Castings (S/S by ASTM-B108) |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| GG I 00521 : NOTICE 1 | INDICATOR, STERILIZATION |
| TT-E-506 Revision K:1977 | Enamel, Alkyd, Gloss, Tints and White (for Interior Use) (See Notice 1 for Replacement Information) |
| L-F-1593 Base Document:1970 | Funnels, Plastic (No S/S Document) |
| TT-P-1565 Revision B:1978 | PAINT, BOOT-TOPPING BLACK (NO S/S DOCUMENT) |
| MIL F 51353 : A NOTICE 1 | FUZE, HAND GRENADE, M201A1 |
| UU-P-00175 Base Document:1965 | PAPER, CORRECTION (NO S/S DOCUMENT) |
| NNN-P-1475 Revision B:1970 | PAPER, FILTER, ANALYTICAL (NO S/S DOCUMENT) |
| GG-W-239 Revision C:1985 | WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENIAL) (NO S/S DOCUMENT) |
| SS-C-635 Revision B:1966 | CRAYON ASSORTMENT, DRAWING, COLORED |
| JJJ-A-20 Base Document:1958 | Acacia, Technical (Gum Arabic) (No S/S Document) |
| ZZ-H-461 Revision E:1986 | Hose and Hose Assembly, Rubber, Gas (Acetylene Hydrogen, Air and Oxygen) (S/S by RMA IP-7 and CGA-E1) |
| DDD-C-001630 Base Document:1973 | Carpets and Rugs, Extra Heavy Pile Weight, Woven, Tufted and Custom Tufted Special Purpose (No S/S Document) |
| HHH-V-1867-7 Base Document:1974 | RADISHES, FRESH, READY-TO-USE |
| P-D-240 Base Document:1960 | DETERGENT, SURGICAL (S/S BY A-A-51107) |
| GGG-S-60 Revision C:1978 | Saws, Butcher\'s; and Blades, Butcher\'s Handsaw (S/S byA-A-2574) |
| GG-T-355 Revision B:1967 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM (METEOROLOGICAL) (NO S/S DOCUMENT) |
| MIL-DTL-39028 Revision F:2013 | Capacitor, Packaging of |
| GG-A-616 Revision E:1978 | APPLICATOR, DISPOSABLE (NO S/S DOCUMENT) |
| UU F 00350 : B | FILE BACKER, PAPER |
| AA-S-698 Revision B:0196 | STOOL, STRAIGHT (S/S BY A-A-51057) |
| L-P-508 Revision H:1977 | PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE (S/S BY NEMA-LD3 AND NEMA-LD3.1) |
| PPP-P-1937 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP, CONTEMPORARY STYLE (NO S/S DOCUMENT) |
| PPP-P-1660 Revision A:1973 | PALLET, EXPENDABLE (NO S/S DOCUMENT) |
| GGG-B-211 Revision B:1967 | BEVELS: SLIDING T; UNIVERSAL: AND SHIP CARPENTERS' |
| GGG-C-520 Revision B:1967 | CLOTH AND DISKS, ABRASIVE, OPEN MESH, WATERPROOF (S/S BY ANSI-B74.18) |
| NNN-C-1434 Revision C:2004 | COVER GLASS, MICROSOOPE SLIDE (S/S BY A-A-51271) |
| GGG-W-301 Revision B:1963 | WHEEL, BUFFING AND POLISHING (S/S BY A-A-51175) |
| NNN-C-1698 Revision A:1975 | COUNTER, BLOOD CELLS, DIFFERENTIAL (S/S BY A-A-50802) |
| NNN-D-335 Revision B:1975 | DISH, CULTURE, PETRI, STERILE, PLASTIC, DISPOSABLE (S/S BY A-A-50853) |
| GGG-P-00475 Base Document:1964 | Pliers, Jewelers (No S/S Document) |
| PPP-B-585 Revision D:1992 | BOXES, WOOD, WIREBOUND |
| A-A-177 Revision C:1994 | DICTIONARY, ENGLISH, TYPE II (MINIMUM 150,000 ENTRIES) (NO S/S DOCUMENT) |
| GG R 1506 : A | ROD, LEVEL. PHILADELPHIA |
| GG-R-1971 Base Document:1976 | RETRACTOR, RIB, HARKEN (NO S/S DOCUMENT) |
| AA-D-001949 Base Document:1975 | DORMITORY FURNITURE MODULAR COMPOSITE METAL AND WOOD (NO S/S DOCUMENT) |
| GGG-P-61 Revision A:1966 | Parallel, Steel and Cast-Iron, Precision Ground |
| GGG-W-643 Revision B:1963 | WRENCH, PIPE, INTERNAL GRIPPING (NO S/S DOCUMENT) |
| O-A-429 Revision D:1984 | ALUMINUM SULFATE, TECHNICAL (S/S BY A-A-55823) |
| GGG-H-135 Base Document:1966 | HAWK, PLASTERER\'S (S/S BY A-A-3016) |
| NNN-S-636 Revision C:1975 | PLATE, SPOT TEST, WHITE PORCELAIN (S/S BY A-A-53770) |
| GG-S-1616 Revision A:1987 | Scissors, Collar and Crown (S/S by A-A-54503) |
| FED-STD-803 Base Document:1991 | PACKAGING OF COTTON AND COTTON-SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) (NO S/S DOCUMENT) |
| PPP S 30 : D NOTICE 1 | SACK, SHIPPING, PAPER (CUSHIONED) |
| GGG-M-125-1 Revision B:1982 | Respirator Assemblies, Air Line, with Face Piece (Supplied Air) (No S/S Document) |
| QQ-C-585 Revision B:1974 | Copper-Nickel-Zinc Alloy Plate, Sheet, Strip, and Bar (Copper Alloy Numbers 735, 745, 752, 762, 766 and 770) (S/S by ASTM-B122) |
| GGG-F-00340 Base Document:1965 | Files, Rotary (S/S by A-A-51146, A-A-51151, A-A-51152, A-A-51154, A-A-51162, A-A-51163, A-A-51166, A-A-51176) |
| MS35643 Revision D:2011 | Gasket: Synthetic Rubber, Cap, Fuel Tank |
| KK-L-2004 Base Document:1976 | Leather, Cattlehide, Deerskin and Horsehide, Chrome Tanned (S/S by MIL-DTL-32092) |
| KK-L-241 Revision D:1969 | Leather, Cattlehide, Rigging (S/S by MIL-DTL-32069) |
| Q-C-571 Revision C:1969 | COKE (COAL) |
| GGG A 00450 : 1964 | ALIGNMENT TOOL, ELECTRIC EQUIPMENT |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| AA-F-700 Revision B:1975 | FROZEN FOOD CABINETS, MECHANICALLY REFRIGERATED, HOUSEHOLD (NO S/S DOCUMENT) |
| P-P-105 Revision C:1970 | Paper, Abrasive, (Flint) (S/S by A-A-1202) |
| MMM-A-121 Base Document:1966 | Adhesive, Bonding Vulcanized Synthetic Rubber to Steel |
| GGG-F-001391 Base Document:1967 | FILER, PISTON RING (NO S/S DOCUMENT) |
| UU-B-368 Revision B:1992 | BINDER, LOOSE-LEAF, SPRING BACK (S/S BY A-A-2995) |
| A-A-319 Revision A:1979 | PAPER, WRAPPING, WET-WAXED (NO S/S DOCUMENT) |
| GG-S-604 Base Document:1960 | SPECULUM, VAGINAL (S/S BY A-A-54301) |
| FF-O-601 Revision F:1990 | OPENERS, CAN, HAND AND MOUNTED (S/S BY A-A-52206) |
| O-E-780 Revision B:1992 | ETHYLENE GLYCOL MONOMETHYL ETHER, TECHNICAL (S/S BY ASTM-D3128) |
| MIL E 8971 : B | ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE |
| DD-S-720 Revision A:1960 | STOPCOCK, LABORATORY APPARATUS, TAPER-GROUND |
| ASTM C 746 : 1990 : R2003 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| GGG S 00278 : A (4) | SHEARS AND SCISSORS |
| MIL-E-0050069 Revision E:1977 | Eyering, Field Protective Mask, C4 (No S/S Document) |
| GG-H-1970 Base Document:1976 | HOLDER, SUTURE NEEDLE, CASTROVIEJO, 5 1/2 INCH (S/S BY A-A-54904) |
| A-A-2776 Base Document:1992 | Pencil, White Correction Lead (No S/S Document) |
| A-A-2749 Base Document:1992 | INK, WRITING RED (NO S/S DOCUMENT) |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| TT I 531 : C NOTICE 1 | INK, DRAWING, WATERPROOF, COLORED (S/S BY A-A-2331) |
| O-A-51 Revision H:1992 | ACETONE, TECHNICAL (S/S BY ASTM-D329) |
| MIL S 37358 : A | SEALER HOLDER, CAPILLARY TUBE |
| ASTM F 289 : 1996 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| ASTM A 1109 : 2018 | Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications |
| ASTM E 784 : 1989 : R2017 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM A 525 : 1993 | Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994) |
| MIL-DTL-83833 Revision C:2017 | 3000 Gallon Aerial Bulk Fuel Delivery System Bladder |
| AASHTO M 204M/M 204 : 2014 | SPECIFICATION FOR UNCOATED STRESS-RELIEVED STEEL WIRE FOR PRESTRESSED CONCRETE |
| ASTM B 894 : 2017 : REDLINE | Standard Specification for ACuZinc5 |
| GG-T-353 Revision D:1975 | Thermometer, Self Indicating, Bimetallic |
| GG-S-1341 Revision A:1975 | WASHER STERILIZER, SURGICAL INSTRUMENT (NO S/S DOCUMENT) |
| GGG-A-151 Revision D:1964 | ADZ (NO S/S DOCUMENT) |
| UU-C-282 Revision D:1974 | Chipboard (S/S by A-A-1507) |
| QQ-C-390 Revision B:1983 | Copper Alloy Castings (Including Cast Bar) (S/S by ASTM, B22, B30, B61, B62, B66, B67, B148, B176, B271, B369, B427, B505, B584, B763, B770, B806, and SAE-AMS4842, AMS4845, AMS4855, AMS4860, AMS4862, AMS4890 |
| GGG-K-00484 Revision D:1966 | KNIFE, POCKET, (HEAVY DUTY) (NO S/S DOCUMENT) |
| GGG-P-643 Revision A:1968 | Puller Kit, Mechanical (No S/S Document) |
| TT-P-605 Revision B:1976 | PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS) (S/S BY A-A-1551) |
| XX-C-2816 Revision A:2016 | Compressor, Air, Reciprocating or Rotary, Electric Motor Driven, Stationary, 10 HP and Larger |
| L-P-387 Revision A:1963 | Plastic Sheet, Laminated, Thermosetting (for Designation Plates) (S/S by ASTM-D709) |
| ASTM F 800 : 1989 | Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992) |
| O-L-172 Revision A:1967 | LEATHER DRESSING, VESICANT GAS RESISTANT (NO S/S DOCUMENT) |
| ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| A-A-2798 Base Document:1992 | LEAD, SYNTHETIC (NO S/S DOCUMENT) |
| CCC-C-46 Revision D:1986 | CLOTH, CLEANING, NONWOVEN FABRIC |
| A-A-975 Revision A:0199 | LEAD, DRAWING (NO S/S DOCUMENT) |
| O-G-491 Revision D:1992 | Glycerol, Technical (High Gravity) (Refer to ACS Pub \"Reagent Chemicals) |
| O-O-670 Revision C:1991 | ORTHOPHOSPHORIC (PHOSPHORIC) ACID, TECHNICAL (S/S BY A-A-55820) |
| MIL-DTL-39032 Revision E:2000 | Resistors, Packaging of |
| NNN B 175 : C | BEAKER LABORATORY GLASS |
| DDD-B-40 Revision A:1958 | BANDAGE, CANTON FLANNEL (NO S/S DOCUMENT) |
| L-P-399 Revision B:1970 | PLASTIC MOLDING AND EXTRUSION MATERIAL STYRENE-ACRYLONITRILE COPOLYMERS (S/S BY ASTM-D4203) |
| MIL-DTL-55330 Revision C:2001 | Connectors, Electrical and Fiber Optic, Packaging of |
| AASHTO M 322M/M 322 : 2010 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| PPP-C-96 Revision E:1992 | Cans, Metal, 28 Gage and Lighter |
| ASTM A 856/A856M : 2003 : R2014 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM C 508 : 2000 : R2004 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| GG-S-935 Revision A:1977 | SYRINGES, HYPODERMIC, NEEDLE LOCK, GLASS, 3 ML (CC) (S/S BY A-A-54902) |
| C-N-200 Revision A:1961 | NEATS FOOT OIL (S/S BY A-A-2884) |
| L-P-527 Revision B:1973 | Plastic Sheet, Styrene-Butadiene |
| GGG-P-00474 Base Document:1967 | PLIERS, HOG RING STAPLE (UPHOLSTERER S), BRAKE REPAIR (BRAKE SPRING), AND HOSE CLAMP (WIRE) (NO S/S DOCUMENT) |
| O-A-451 Revision F:1975 | AMMONIUM HYDROXIDE, TECHNICAL (S/S BY A-A-59370) |
| MIL-P-51406 Revision A:1984 | Plastic Sheets, Vinyl Chloride Polymer and Copolymer, Flexible |
| A-A-2752 Base Document:0199 | Ink, Writing for Fountain and Dip Pens (No S/S Document) |
| A-A-2784 Base Document:1992 | Ink, Roll (No S/S Document) |
| TT-E-781 Revision D:1992 | ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL (S/S BY A-A-59106) |
| ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM C 220 : 1991 : R2004 | Standard Specification for Flat Asbestos-Cement Sheets |
| ASTM A 600 : 1992 : REV A : R2016 | Standard Specification for Tool Steel High Speed |
| ASTM F 872 : 1984 : R1990 | Specification for Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable (Withdrawn 1999) |
| ASTM C 663 : 1998 : R2003 : EDT 2 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM A 818 : 2006 : R2016 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM A 834 : 1995 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM C 668 : 1998 : R2008 | Standard Specification for Asbestos-Cement Transmission Pipe |
| ASTM F 1488 : 2015-01 | SPECIFICATION FOR COEXTRUDED COMPOSITE PIPE |
| ASTM B 176 : 2018 : REDLINE | Standard Specification for Copper-Alloy Die Castings |
| ASTM A 779/A779M : 2016 : REDLINE | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete |
| ASTM A 911/A911M : 2015 : REDLINE | Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties |
| ASTM F 1348/F1348M : 1991 : R2002 | Standard Specification for Pneumatic Rotary Descaling Machines |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM F 2658 : 2007 : R2013 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
| ASTM C 296/C296M : 2000 : R2015 | Standard Specification for Asbestos-Cement Pressure Pipe (Withdrawn 2021) |
| ASTM A 500 : 2003 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 853 : 2004 : R2010 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM F 1336 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
| ASTM F 2623 : 2015-01 | SPECIFICATION FOR POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) SDR 9 TUBING |
| ASTM F 1735:2009 | Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM B 168 : 2011(R2016) | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip |
| ASTM F 2658 : 2007 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
| ASTM A 519/A519M : 2017 : REDLINE | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 623 : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements |
| ASTM B 167 : 2011 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube |
| ASTM C 223 : 1998 : R2003 | Standard Specification for Asbestos-Cement Siding |
| ASTM A 764 : 2007 : R2017 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM F 1733 : 2013 : REDLINE | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
| ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM B 211M : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) (Withdrawn 2019) |
| ASTM F 845 : 1996 | Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003) |
| ASTM A 220/A220M : 1999 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 970/A970M : 2017-12 | SPECIFICATION FOR HEADED STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 764 : 2007 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 135/A135M : 2009 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM F 437 : 2015 : REDLINE | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM C 746 : 1990 : R2008 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| ASTM B 85 : 2003 | Standard Specification for Aluminum-Alloy Die Castings |
| ASTM A 818 : 2006 : R2010 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM A 421/A421M : 2015 : REDLINE | Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete |
| ASTM A 686 : 1992 : R2004 | Standard Specification for Tool Steel, Carbon |
| ASTM A 854/A854M : 2008 : R2013 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM C 663 : 1998 : R2014 | Standard Specification for Asbestos-Cement Storm Drain Pipe (Withdrawn 2019) |
| ASTM F 1665 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 1345 : 2010 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM F 1183 : 1996 : R2006 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM D 2282 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) |
| ASTM F 1145 : 2005 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| ASTM D 2680 : 2001 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM C 1447/C1447M : 2004 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM A 519 : 2006 : R2012 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM F 1697:2009 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit <a href="#fn00002"></a> |
| ASTM B 236 : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM E 674 : 2012 : R2016 | Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) |
| ASTM F 1665 : 2008 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 3253 : 2017 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems |
| ASTM B 80 : 2015 : REDLINE | Standard Specification for Magnesium-Alloy Sand Castings |
| ASTM B 865 : 2004 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM A 681 : 2008 : R2015 | Standard Specification for Tool Steels Alloy |
| ASTM C 223 : 1998 : R2008 | Standard Specification for Asbestos-Cement Siding |
| ASTM F 2562/F2562M : 2015 : REDLINE | Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
| ASTM F 1665 : 2008 : R2013 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM E 786 : 1981 : R2017 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM B 211 : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| ASTM B 236M : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
| KK-L-154 Revision F:1976 | LEATHER, CATTLEHIDE, (BAG AND CASE) |
| GGG-G-521 Revision E:1988 | GOGGLES, INDUSTRIAL, RESILIENT FRAME (S/S BY A-A-1110) |
| ASTM A 905 : 2004 : R2017 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| GG H 1488 : A NOTICE 1 | HOLDER, DESK TRAY LABEL |
| HH-I-1972-2 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH ASPHALT/ORGANIC FELT, POLYMER/ORGANIC MAT, ASPHALT/GLASS MAT, OR POLYMER/GLASS MAT ON BOTH SIDES OF THE FOAM (NO S/S DOCUMENT) |
| P-P-121 Revision D:1974 | Paper, Abrasive, Garnet (S/S by A-A-1201) |
| TT L 34 : B INT AMD (1) | LACQUER, (WORKABLE FIXATIVE) NITROCELLULOSE (IN PRESSURIZED DISPENSERS) |
| ASTM F 2881 : 2011 : R2015 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| JJJ-S-791 Revision L:1974 | SUGAR, REFINED AND BRO |
| U-A-408 Revision A:1965 | Alcohol, Dehydrated, Analyzed Reagent (S/S by A-A-51693) |
| WW-P-405 Revision B:1974 | Pipe, Corrugated (Iron or Steel, Zinc Coated) (S/S by ASTM-A760/ASTM-A760M, ASTM-A761/ASTM-A761M, ASTM-A762/ASTM-A762M, and ASTM-A849 |
| L-C-001676 Base Document:1970 | CUSHION, CARPET AND RUG, VIRGIN URETHANE (NO S/S DOCUMENT) |
| GG-T-321 Revision D:1977 | THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS (NO S/S DOCUMENT) |
| MIL-M-51282 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, FIELD, M17A1 (NO S/S DOCUMENT) |
| PPP-B-638 Revision B:1975 | BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF (NO S/S DOCUMENT) |
| GGG-D-326 Revision C:1964 | DIGGER; POSTHOLE, HINGED |
| MIL-D-10131 Revision B:0197 | Disc, Inlet Valve |
| DDD-R-00255 Base Document:1971 | RIBBON, ADDRESS PLATE MACHINE (NO S/S DOCUMENT) |
| GGG-K-471 Revision C:1963 | KNIFE, DRAW |
| PPP-B-28 Revision A:1973 | BAG, PLASTIC (SANDWICH) (S/S BY A-A-148) |
| NNN-W-25 Revision B:1976 | WASH BOTTLES, LABORATORY (NO S/S DOCUMENT) |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| AA-F-355 Revision B Interim Revision:1972 | Filing Cabinet, Steel, Legal and Letter Size, Insulated (S/S by A-A-2196) |
| MIL-P-51402 Base Document:1975 | PLASTIC SHEET: POLYPROPYLENE-POLYETHYLENE LAMINATE FILM (NO S/S DOCUMENT) |
| O-D-210 Revision A:1976 | DESICCANT, ACTIVATED, CALCIUM SULFATE, ANHYDROUS (NO S/S DOCUMENT) |
| MIL-E-51420 Revision A:1983 | Edgeseal, Materials, Chemical-Biological Filter |
| GGG-V-410 Revision B:1993 | VISE, BENCH, CLAMP BASE; SHEET METAL-WORKER\'S; BENCH AND PIPE; JEWELER\'S; MACHINIST\'S; AND MULTIPOSITION (NO S/S DOCUMENT) |
| GGG W 631 : B INT AMD (5) | WRENCH ADJUSTABLE OPEN END AUTO AND MONKEY |
| SS-C-646 Revision B:1969 | CRAYON, MARKING, LUMBER |
| MMM-A-250 Revision C:1975 | ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES) (S/S BY A-A-59692) |
| NNN C 435 : B NOTICE 1 | |
| HH-I-1972-4 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH GYPSUM BOARD ON ONE SIDE AND ALUMINUM FOIL OR ASPHALT/ORGANIC FELT ON THE OTHER SIDE OF THE FOAM (NO S/S DOCUMENT) |
| PPP-T-495 Revision B:1974 | Tubes, Mailing, and Filing |
| GGG-B-351 Revision B:1963 | BIN, STORAGE AND DISPLAY, ROTARY |
| FF-W-100 Revision C:1969 | Washer, Lock (Tooth) |
| ASTM F 1499 : 2017 : REDLINE | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
| PPP-P-1134 Revision D:1983 | PACKAGING OF COTTON AND COTTON-SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) (S/S BY FED-STD-803) |
| GGG-M-125-5 Revision B:1985 | Respirator Assembly, Half Mask, Air Purifying Particulate Filter (for Dusts, Fumes, and Mists) (No S/S Documents) |
| ASTM C 659 : 1990 : R2014 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels (Withdrawn 2019) |
| KK-L-254 Revision D:1975 | LEATHER, SHEEPSKIN, CHROME TANNED (S/S BY MIL-DTL-32067) |
| O-I-1279 Revision B:1993 | ION EXCHANGE RESINS |
| A-A-3002 Base Document:1996 | Mirrors, Glass |
| BB-C-104 Revision B:1971 | CARBON DIOXIDE, TECHNICAL: SOLID (S/S BY CGA-G6.2) |
| GG-D-465 Revision A:1977 | DISTILLING APPARATUS, LABORATORY (NO S/S DOCUMENT) |
| WW P 1432 : C | PIPE, STEEL (COAL TAR ENAMEL OR CEMENT MORTAR LINING, AND COAL TAR ENAMEL COATED AND WRAPPED |
| QQ-C-530 Revision C:1971 | COPPER-BERYLLIUM ALLOY BAR, ROD, AND WIRE (COPPER ALLOY NUMBERS 172 AND 173) (S/S BY ASTM-B196, ASTM-B197, AND ASTM-B194) |
| TT-E-751 Revision C:1967 | Ethyl Acetate, Technical |
| MIL S 003793 : C NOTICE 2 | SMOKE POT, HC, 30 POUND, ABC-M5 COMPONENTS FOR |
| FF-H-001687 Revision B:1976 | LOCKS, OFFICE MACHINE (S/S BY A-A-1013) |
| GGG-H-575 Base Document:1962 | HOLDER, SHEET METAL, HOLE AND EDGE GRIP |
| MIL C 51073 : D | COUPLING HALF, QUICK DISCONNECT |
| O-S-595 Revision B:1967 | Sodium Dichromate, Dihydrate, Technical (S/S by A-A-59123) |
| L-P-383 Base Document:1967 | Plastic Material, Polyester Resin, Glass Fiber Base, Low Pressure Laminated |
| TT-C-520 Revision B:1973 | COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, UNDERBODY (FOR MOTOR VEHICLES)(S/S BY MIL-C-62218) |
| GGG-B-451 Revision D:1968 | Blade, Hand Hacksaw and Blade, Power Hacksaw (S/S by ASME-B94.52M) |
| GG-B-823 Revision C:1975 | BUR, DENTURE TRIMMING (S/S BY A-A-51206) |
| WW-P-521 Revision G:1977 | Pipe Fittings, Flange Fittings, and Flanges, Steel and Malleable Iron (Threaded and Butt Welding) Class 150 (S/S by ASME-B16.3, ASME-B16.5 and ASME-B16.9) |
| GGG-N-398 Revision A:1963 | NUTRUNNER, PNEUMATIC, PORTABLE (NO S/S DOCUMENT) |
| GGG-S-69 Revision D:1983 | SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) (NO S/S DOCUMENT) |
| L-P-00315 Revision D:1976 | Pipe and Tubing, Nonmetallic (Plastic) (S/S by ASTM-D2239 and ASTM-D3309) |
| AAA-B-92 Revision D:1977 | BALANCE, ANALYTICAL (NO S/S DOCUMENT) |
| FF-T-305 Revision C:1974 | Thumbscrew |
| JJJ-S-351 Revision H:1981 | SYRUP (S/S BY A-A-20124) |
| GGG-T-001310 Base Document:1967 | TAPE, FISH, STEEL (NO S/S DOCUMENT) |
| KKK-R-2800 Base Document:1993 | RAILWAY CAR SPOTTER, SELF-PROPELLED, GED OR DED (NO S/S DOCUMENT) |
| TT-N-95 Revision B:1967 | Naphtha, Aliphatic |
| JJ-U-513 Revision D:1975 | Undershirt, Man\'s, (Quarter-Sleeve) (No S/S Document) |
| GGG-K-481 Revision D:1995 | KNIFES; CRAFTSMAN\'S, (HAWKBILL, SHOE, CHIPPING) PUTTY AND SCRAPING (NO S/S DOCUMENT) |
| UU T 94 : C NOTICE 1 | TAPE, EMBOSSING |
| ASTM C 1447/C1447M : 2004 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| NNN-S-1356 Revision B:1978 | SPATULA, LABORATORY (METAL BLADE) (S/S BY A-A-50335) |
| ASTM A 159 : 1983 : R2001 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 184/A184M : 2017 : REDLINE | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| ASTM A 47/A47M : 1999 : R2014 | Standard Specification for Ferritic Malleable Iron Castings |
| UU-B-790 Revision A:1968 | Building Paper Vegetable Fiver: (Kraft, Waterproofed, Water Repellent and Fire Resistant) |
| HH-I-435 Revision B:1977 | INSULATOR, ELECTRIC, PORCELAIN AND GLASS (S/S BY ANSI-C29.1-C29.6) |
| L-P-513 Revision C:1968 | Plastic Sheet and Insulation Sheet, Electrical (Laminated, Thermosetting, Paper-Base, Phenolic-Resin) (S/S by ASTM-D709) |
| G-D-331 Revision D:1974 | DICTIONARIES, ENGLISH (S/S BY A-A-3107) |
| GG-I-271 Revision C:1964 | IGNITER, FRICTION, OXYACETYLENE-TORCH (S/S A-A-3033) |
| ASTM F 781 : 1995 | Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
| ASTM C 746 : 1990 : R2003 : EDT 1 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| FF-P-386 Revision D:1971 | Pin, Cotter (Split)(S/S by ASME-B18.8.1) |
| A-A-2770 Base Document:1992 | Pencil, Copying (No S/S Document) |
| FF-P-101 Revision F:1984 | Padlocks (S/S by A-A-1928, A-A-1930, A-A-1927, MIL-S-23769) |
| QQ-M-38 Revision B:1969 | MAGNESIUM ALLOY DIE CASTINGS (AZ91A) (S/S BY ASTM-B94) |
| SS-S-210 Revision A:1975 | Sealing Compound, Preformed Plastic, for Expansion Joints and Pipe Joints (No S/S Document) |
| GGG-D-751 Revision D:1989 | DRILLS, TWIST (TAPER-SQUARE STRAIGHT, AND TAPER-ROUND SHANKS) (NO S/S DOCUMENT) |
| GGG-R-00620 Base Document:1965 | Roller, Hand (Rubber Roller)(S/S by A-A-3034) |
| ASTM F 1697 : 2009 : R2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit |
| HH-M-622 Revision D:1977 | MORTAR, REFRACTORY, HEAT SETTING, BONDING (WET AND DRY TYPES) (S/S BY A-A-59177) |
| DDD-P-351 Revision H:1978 | PILLOWCASE, COTTON AND POLYESTER/COTTON (S/S BY A-A-55214) |
| AA C 0010 : B | CABINET, BEDSIDE, METAL, HOSPITAL TYPE |
| H R 550 : B NOTICE 1 | ROLLER, KIT, PAINT |
| DD-P-00355 Revision A:1975 | PIPET, DROPPING, GLASS OR PLASTIC (NO S/S DOCUMENT) |
| GG-P-181 Revision C:1963 | PENHOLDER, WRITING (NO S/S DOCUMENT) |
| L-P-391 Revision D:1975 | Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplication) (S/S by ASTM-D4802 and ASTM-D5436) |
| ASTM E 454 :2012 | Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) |
| AA-F-001873 Revision A:1977 | FURNITURE, CONTEMPORARY, OAK (GENERAL SPECIFICATION) (NO S/S DOCUMENT) |
| DDD-A-1466 Revision C:1991 | Apron, Construction Worker\'s (No S/S Document) |
| GG-R-1549 Revision A:1986 | RONGEUR, DENTAL (S/S BY A-A-54464) |
| FF-O-605 Revision B:1973 | Opener, Can, Hand (Disposable, Combination Opener and Punch) (S/S by A-A-1080) |
| GGG-T-00870 Revision B:1966 | TWEEZERS, CRAFTSMAN\'S (NO S/S DOCUMENT) |
| TT-V-121 Revision H:1978 | Varnish, Spar, Water-Resisting (S/S by A-A-1800) |
| FF C 00431 : B | CLIP, PAPER (BINDER) |
| NNN-B-585 Revision B:1979 | BOX, MICROSCOPIC SLIDE, PLASTIC (S/S BY A-A-53683) |
| A-A-2762 Base Document:1992 | Typing, Element (Daisy Wheel - Disk Type) (No S/S Document) |
| PPP-C-1842 Revision B:1992 | CUSHIONING MATERIAL, FLEXIBLE OPEN CELL PLASTIC FILM (FOR PACKAGING APPLICATIONS) (S/S BY A-A-3129) |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE) (S/S BY AA-B-2892) |
| KKK-C-650 Revision E:1985 | Creeper, Mechanic\'s (S/S by A-A-50313) |
| FF-P-416 Revision E:1963 | Pins, Safety(S/Sby A-A-119) |
| L B 00565 : A | BOX, INDEX CARD, PLASTIC |
| NNN G 698 : C | GRID WIRE GAUZE LABORATORY |
| NNN R 560 : A | ROD STIRRING LABORATORY |
| GGG-T-0030 Base Document:1965 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) (NO S/S DOCUMENT) |
| GG O 00588 : C | OPENER, LETTER, HAND, METAL |
| P-C-433 Revision B:1976 | CLEANING COMPOUND, ALKALI, PIPELINE (S/S BY A-A-1911) |
| HH-I-521 Revision F:1980 | INSULATION BLANKETS, THERMAL (MINERAL FIBER, FOR AMBIENT TEMPERATURES) (S/S BY ASTM-C665) |
| HH-I-553 Revision C:1975 | Insulation Tape, Electrical, (Rubber, Natural and Synthetic) (S/S by ASTM D4388) |
| JJ-S-750 Revision A:1967 | Strap, Webbing (S/S BY A-A-556) |
| GGG-S-00275 Base Document:1965 | Shears, Barbers\' (S/S by A-A-2887) |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) (NO S/S DOCUMENT) |
| GGG-C-00555 Revision B:1966 | COMPRESSOR, PISTON RING, BAND-TYPE (S/S BY A-A-3038) |
| PPP-P-1875 Base Document:1975 | PREPARATION FOR DELIVERY REQUIREMENTS FOR CHAIRS, METAL AND PLASTIC, OFFICE (NO S/S DOCUMENT) |
| AA-S-75 Revision A:1975 | SAFE, DENTAL X-RAY FILM PROTECTIVE (S/S BY A-A-50895) |
| DDD-D-626 Revision A:1959 | DRAPE, SURGICAL, CLOTH (NO S/S DOCUMENT) |
| GG-C-121 Base Document:1959 | CANNULA, BRAIN, FRAZIER (S/S BY A-A-54908) |
| QQ-B-626 Revision D:1973 | Brass, Leaded and Nonleaded: Rod, Shapes, Forgings, and Flat Products with Finished Edges (Bar and Strip) (S/S by ASTM-B121, ASTM-B36, ASTM-B16, ASTM-B16M, AND ASTM-B124) |
| GGG-W-001405 Base Document:1968 | Wrench, Box (Ratcheting) (No S/S Document) |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-P-51403 Base Document:1974 | PLASTIC SHEET, VINYL, FLEXIBLE (NO S/S DOCUMENT) |
| GGG-T-563 Revision A:1958 | Tools Blacksmith\'s (Chisels, Flatters, Fullers, Hardies, Bolt Heading Tools, Punches and Swages) |
| GGG-D-671 Revision D:1964 | DRILL, HAND AND PUSH (NO S/S DOCUMENT) |
| AA-F-2815 Base Document:1992 | FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE) (NO S/S DOCUMENT) |
| GGG-W-00645 Revision B:1967 | WRENCH, OPEN END BOX (AND BOX COMBINATION, CROWFOOT, RATCHET, AND RATCHET CROWFOOT) (NO S/S DOCUMENT) |
| DDD T 00101 : A NOTICE 1 | TAPE, TEXTILE, COTTON, TYING |
| NNN-R-770 Base Document:1966 | RULE, LABORATORY (MEASURING, PLASTIC AND WOOD) (S/S BY A-A-54946) |
| CCC-W-51 Revision D:1975 | WADDING, COTTON, SURGICAL (S/S BY A-A-54748) |
| GG-A-440 Revision C:1981 | Alidades, Surveying: Telescope (No S/S Document) |
| GG-N-350 Base Document:1961 | NIPPER, INGROWN TOENAIL (S/S BY A-A-53860) |
| MIL-D-0050082 Revision K:1983 | Disks, Inlet and Nosecup Valve (No S/S Document) |
| GGG-S-793 Revision A:1964 | STRIPPER, WIRE, BENCH (NO S/S DOCUMENT) |
| GGG-C-315 Revision A:1967 | CHISEL, BRICK (S/S BY A-A-2880) |
| TT-L-132 Base Document:1966 | LITHOGRAPHIC PLATE ASPHALTUM SOLUTION (NO S/S DOCUMENT) |
| GGG-S-65 Revision C:1992 | SAWS, HAND (NO S/S DOCUMENT) |
| ASTM F 949 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
| HH-I-1972-5 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE BOARD ON BOTH SIDES OF THE FOAM (NO S/S DOCUMENT) |
| UU B 001254 : NOTICE 1 | BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER |
| GGG-S-51 Revision E:1995 | Saw, Circular, Portable, Electric |
| QQ-B-613 Revision D:1973 | Brass, Leaded and Nonleaded :Flat Products (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B36 and ASTM-B121) |
| KK-G-476 Revision E:1976 | Gloves, Leather, (Gauntlet, Linemen\'s) (No S/S Document) |
| ASTM F 1533 : 2001 : R2009 | Standard Specification for Deformed Polyethylene (PE) Liner (Withdrawn 2018) |
| GGG-N-202 Revision C:1971 | NEEDLE, SAILMAKER\'S (S/S BY A-A-55306) |
| ASTM F 2929 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| MMM-A-130 Revision B:1974 | ADHESIVE, CONTACT (S/S BY A-A-1936) |
| ASTM A 886/A886M : 2017-11 | SPECIFICATION FOR STEEL STRAND, INDENTED, SEVEN-WIRE STRESS-RELIEVED FOR PRESTRESSED CONCRETE |
| MIL-C-24723 Base Document:1989 | Castings, Nickel-Copper Alloy |
| GGG-P-791 Revision C:1961 | PULLER, NAIL, HAND (S/S BY A-A-3040) |
| O H 00765 : D | HYDROCHLORIC ACID, TECHNICAL |
| MMM-A-00150 Revision B:1976 | ADHESIVE FOR ACOUSTICAL MATERIALS (NO S/S DOCUMENT) |
| GG-A-614 Base Document:1960 | APPLICATOR, METAL (NO S/S DOCUMENT) |
| GGG-T-350 Revision B:1966 | TIRE LOCK RING TOOL, TIRE REMOVING TOOL, AND TIRE IRON (NO S/S DOCUMENT) |
| TT-R-230 Revision B:1968 | REMOVER, PAINT (ALKALI-TYPE FOR HOT APPLICATION) (NO S/S DOCUMENT) |
| O-C-828 Revision C:1980 | CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL (S/S BY AWWA-B602) |
| AASHTO M 280 : 2014 | SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE |
| O-D-1271 Revision B:1985 | DIETHYLENETRIAMINE, TECHNICAL (S/S BY A-A-59162) |
| UU-P-561 Revision H:1972 | PAPER, TRACING (S/S BY A-A-2946) |
| ASTM B 90/B90M : 2015 : REDLINE | Standard Specification for Magnesium-Alloy Sheet and Plate |
| QQ-M-44 Revision B:1964 | Magnesium Alloy Plate and Sheet ( AZ31B) (S/S byAMS4375, AMS4377 and AMS4376) |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| MIL-G-46693 Revision F:1976 | Grenade, Hand-Rifle, Smoke, WP, M34, Inert Components (No S/S Document) |
| MIL-B-25337 Revision B:1970 | Bottles Assemblies, Vacuum, Aircraft (No S/S Document) |
| FF-W-84 Revision A:1967 | Washers, Lock (Spring) |
| NNN-S-750 Base Document:1962 | STAND, LABORATORY APPARATUS SUPPORT (S/S BY A-A-51211) |
| GG-M-001342 Base Document:1968 | MARKER, TUBE TYPE, FINE TIP, TRANSPARENCY (S/S BY A-A-2756) |
| GG-M-001130 Base Document:1966 | Marker, Tube Type, Fine Tip (S/S by A-A-2778) |
| QQ-Z-301 Revision C:1964 | ZINC SHEET AND STRIP (S/S BY ASTM-B69) |
| GG C 00289 : NOTICE 1 | CHISELS, DENTURE-TRIMMING |
| DDD-C-641 Revision B:1964 | CURTAIN, AIR PORT, CURTAIN, DOORWAY AND CURTAIN FIXTURES |
| TT-E-776 Revision B:1960 | Ethylene Glycol Monobutyl Ether (for Use in Organic Coatings) (S/S by ASTM-D330) |
| GG S 00928 : C | SYRINGE, METAL, EAR |
| MIL C 17-112 : A | CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS H17/112 RG304 |
| GG-M-105 Revision D:1977 | MALLET, ORAL SURGERY (S/S BY A-A-51060) |
| PPP-T-1150 Revision B:1978 | TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING, MACHINERY, PACKAGING AND PACKING OF (S/S BY PPP-P-40) |
| GG-B-2043 Base Document:1977 | BRUSH, SURGICAL SCRUB (S/S BY A-A-54917) |
| L-P-600 Revision A:1972 | Portfolio, Plastic (S/S by A-A-2724) |
| EE-B-575 Revision E:1989 | BOUILLON (SOUP AND GRAVY BASES) (S/S BY A-A-20202) |
| GGG-T-00559 Base Document:1964 | Tool Kit, Leathercraft (No S/S Document) |
| KK-C-1535 Revision B:1976 | Case, Dispatch, Molded Plastic (Metal Frame) (S/S by A-A-2523) |
| L-F-36 Revision C:1963 | FACESHIELD, INDUSTRIAL (S/S BY ANSI-Z87.1) |
| GGG T 00671 : B (1) | TROWELS |
| O-H-205 Revision D:1976 | HERBICIDE, DALAPON (NO S/S DOCUMENT) |
| DD-T-733 Base Document:1960 | TUBE, HYPODERMIC NEEDLE PROTECTING (NO S/S DOCUMENT) |
| MIL-F-51481 Base Document:1981 | Filter Material, Laminated Paper, Ten Ply (No S/S Document) |
| ASTM C 220 : 1991 : R1999 | Standard Specification for Flat Asbestos-Cement Sheets |
| GG-S-945 Revision A:1959 | SYRINGE AND NEEDLE, DISPOSABLE, HYPODERMIC, STERILE, SINGLE INJECTION |
| PPP-C-843 Revision D:1977 | CUSHIONING MATERIAL, CELLULOSIC (S/S BY A-A-1898) |
| PPP-B-640 Revision D:1966 | Boxes, Fiberboard, Corrugated, Triple Wall (S/S by ASTM-D5168) |
| O-S-576 Revision F:1967 | Sodium Biccarbonate, Technical (S/S by A-A-374) |
| MMM-A-188 Revision C:1975 | ADHESIVE; UREA-RESIN-TYPE (LIQUID AND POWDER) (S/S BY A-A-3052) |
| W-B-137 Revision C:1973 | BATTERY, STORAGE, (NICKEL-ALKALINE, INDUSTRIAL, FLOATING SERVICE) |
| ASTM F 2619/F2619M : 2013 : REDLINE | Standard Specification for High-Density Polyethylene (PE) Line Pipe |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| ASTM A 809 : 2008 : R2013 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM C 1450/C1450M : 2004 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| MIL-F-51536 Base Document:1988 | Filter Unit, Gas-Particulate, 200 CFM, 208V, 400 HZ, M56 |
| ASTM B 90M : 1990 | Specification for Magnesium-Alloy Sheet and Plate (Metric) (Withdrawn 1993) |
| ASTM A 797 : 1982 | Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1988) |
| ASTM A 878/A878M : 2017-09 | SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY |
| ASTM A 749/A749M : 2014 : REDLINE | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM A 48/A48M : 2003 | Standard Specification for Gray Iron Castings |
| ASTM D 2852 : 2016 : REDLINE | Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| ASTM C 221 : 1998 : R2003 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| ASTM B 163 : 2011 : EDT 2 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM A 823 : 1999 : R2008 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM E 674 : 2012 | Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) |
| ASTM E 784 : 1989 : R2000 : EDT 1 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM A 21 : 1994 : R1999 | Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use (Withdrawn 2003) |
| ASTM C 222 : 1997 : R2014 | Standard Specification for Asbestos-Cement Roofing Shingles (Withdrawn 2019) |
| ASTM C 220 : 1991 : R2009 | Standard Specification for Flat Asbestos-Cement Sheets |
| ASTM A 681:2008 | Standard Specification for Tool Steels Alloy |
| ASTM C 659 : 1990 : R2003 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| ASTM C 659 : 1990 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM B 32 : 2008 | Standard Specification for Solder Metal |
| ASTM C 1449/C1449M : 2005 : REV A : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM C 221 : 1998 : R2014 | Standard Specification for Corrugated Asbestos-Cement Sheets (Withdrawn 2019) |
| ASTM F 1335 : 2004 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM A 555/A555M : 2016 : REDLINE | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 809 : 2008 : R2017 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM A 686 : 1992 : R2016 | Standard Specification for Tool Steel, Carbon |
| ASTM C 875 : 1998 | Standard Specification for Asbestos-Cement Conduit |
| ASTM F 1735 : 2009 : R2015 | Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM A 600 : 1992 : REV A : R1999 | Standard Specification for Tool Steel High Speed |
| ASTM A 1000 : 2005 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
| ASTM F 1183 : 1996 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM C 222 : 1997 : R2008 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM B 168 : 2011 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, |
| ASTM F 492 : 1995 | Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
| ASTM E 323 : 2011 : R2016 | Standard Specification for Perforated-Plate Sieves for Testing Purposes |
| ASTM F 1412 : 2016 : REDLINE | Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| ASTM F 679 : 2016 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
| ASTM A 491 : 2011 : R2017 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM F 423 : 1995 | Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002) |
| ASTM C 220 : 1991 : R2004 : EDT 1 | Standard Specification for Flat Asbestos-Cement Sheets |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| ASTM A 116 : 2011 | Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
| ASTM D 2467 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM B 774 : 2000 : R2014 | Standard Specification for Low Melting Point Alloys |
| ASTM D 2235 : 2004 : R2016 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM F 1040 : 1987 : R2007 | Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable (Withdrawn 2012) |
| ASTM F 1040 : 1987 : R1993 | Standard Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceable |
| ASTM F 1040 : 1987 : R2001 | Standard Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceable |
| ASTM D 4689 : 2012-10 | SPECIFICATION FOR ADHESIVE, CASEIN-TYPE |
| ASTM F 289 : 1996 : R2002 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| ASTM B 404/B404M : 2002 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins (Withdrawn 2006) |
| ASTM F 771 : 1999 : R2005 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) |
| SAE AMSI538A | Insulation, Electrical, Pasted-Mica |
| ASTM D 2750 : 1995 | Specification for Acrylonitrile- Butadiene-Sytrene (ABS) Plastics Utilities Conduit and Fittings (Withdrawn 1997) |
| PPP-B-2122 Base Document:1981 | BOX, FOLDING (PAPERBOARD, FOR ARCHIVAL MICROFICHE) (NO S/S DOCUMENT) |
| RR-S-617 Revision D:1974 | Spoons, Food Service, (Basting, Straining, and Mixing (S/S by A-A-1082) |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| ASTM B 483/B483M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications |
| FF-B-561 Revision D:1989 | Bolts, (Screw), Lag (S/S by ASME-B18.2.1and ASME-B18.18.1M) |
| L E 530 : A | ENVELOPE, TRANSPARENT |
| PPP-P-001944 Base Document:1976 | PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE (NO S/S DOCUMENT) |
| RR-P-00560 Base Document:1967 | POST, LEDGER AND BINDER, SCREW TYPE (S/S BY A-A-175) |
| PPP-B-566 Revision E:1974 | Boxes, Folding, Paperboard |
| FFF-C-641 Revision D:1975 | Cream, Shaving and Soap, Shaving |
| GGG-K-266 Revision B:1964 | KEY, COWL FASTENER (S/S BY A-A-2561) |
| MIL-S-0010133 Revision D:1974 | SEAT, OUTLET-VALVE, ALUMINUM-BASE-ALLOY DIECASTING FOR OUTLET VALVE, C15 (NO S/S DOCUMENT) |
| EE-I-1699 Base Document:1972 | ICE CREAM MIXES, REGULAR AND IMITATION, DEHYDRATED (NO S/S DOCUMENT) |
| QQ-B-650 Revision C:1987 | BRAZING ALLOYS, COPPER, COPPER-ZINC, AND COPPER-PHOSPHORUS (S/S BY AWS A5.01 AND AWS A5.8) |
| DD-W-131 Revision C:1958 | WATCH GLASS, LABORATORY (S/S BY A-A-53746 & A-A-53921) |
| TT I 00549 : C NOTICE 1 | INK, WRITING, COLORED (NON-PERMANENT) |
| PPP-H-1581 Revision A:1977 | Hardware (Fasteners and Related Items), Packaging of (S/S by ASTM-D3951 or Mil-Std-2073-) |
| PPP-B-1055 Revision B:1975 | BARRIER MATERIAL, WATERPROOF, FLEXIBLE |
| O-C-430 Revision A:1975 | CLEANING COMPOUND, PAINT BRUSH (NO S/S DOCUMENT) |
| QQ-T-580 Revision C:1977 | Tool Steel, Carbon and Carbon Vanadium (S/S by ASTM A686) |
| L-P-410 Revision A:1966 | Plastic, Polymide (Nylon), Rigid: Rods, Tubes, Flats, Molded and Cast Parts |
| GGG-W-644 Revision C:1992 | Wrench, Socket (Wheel Nut) (No S/S Document) |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE (S/S BY ASTM-D2103) |
| PPP-B-1980 Base Document:1977 | BOARD, BULLETIN AND CONTROL, PACKAGING AND PACKING OF (NO S/S DOCUMENT) |
| AASHTO M 55M/M 55 : 2013 | METHOD OF TEST FOR STEEL WELDED WIRE REINFORCEMENT, PLAIN, FOR CONCRETE |
| TT W 535 : C NOTICE 2 | WOOD PRESERVATIVE, FLUOR CHROME ARSENATE PHENOL MIXTURE |
| HH P 1784 : NOTICE 1 | PAPER, ASBESTOS |
| PPP-B-636 Revision J:1981 | Boxes, Shipping, Fiberboard (S/S by ASTM-D1974 and ASTM-D5118) |
| GGG-V-415 Revision A:1967 | VISE, PIPE (S/S BY A-A-2980 AND A-A-3050) |
| HHH-V-1867-2 Base Document:1974 | CARROTS, FRESH, READY-TO-USE |
| GG-R-001200 Base Document:1986 | RULER, PLASTIC, DESK (S/S BY A-A-563) |
| P-P-200 Revision D:0197 | PEN CLEANER, LIQUID (NO S/S DOCUMENT) |
| GG-B-00596 Revision B:1970 | BOUGIE, EUSTACHIAN, SET OF FIVE (NO S/S DOCUMENT) |
| SS P 201 : D NOTICE 1 | PENCIL, NONMECHANICAL, COLORED LEAD |
| O-C-940 Revision B:1975 | Cyclohexylamine, Technical |
| NNN T 792 : A NOTICE 1 | TUBE DRYING LABORATORY |
| A-A-3186 Base Document:2002 | File Cabinets, Vertical, Steel |
| AA-F-00360 Revision B Interim Revision:2002 | Filing Cabinets, Steel, Map and Plan, (Sectional) |
| L-P-1036 Revision A:1974 | PLASTIC ROD SOLID, PLASTIC TUBES AND TUBING, HEAVY WALLED, POLYVINYL CHLORIDE, RIGID (S/S BY ASTM-D1784) |
| QQ-T-570 Revision C:1977 | Tool Steel, Alloy (S/S by ASTM-A681) |
| GGG-F-00626 Revision A:1994 | FORK, STONE, HAND, D-HANDLE (NO S/S DOCUMENT) |
| TT-S-222 Revision B:1967 | SEALING COMPOUND: ASBESTOS (NO S/S DOCUMENT) |
| ASTM A 805/A805M : 2009 | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
| AA-S-00275 Base Document:1964 | SHELVING, STORAGE AND DISPLAY, STEEL, BOLTLESS (NO S/S DOCUMENT) |
| GGG-W-648 Revision B:1992 | Wrench, Lineman\'s |
| KKK-T-654 Revision D:1985 | Truck, Dolly (Roller) (No S/S Document) |
| QQ A 325 : B | ALUMINUM ALLOY BARS, RODS, WIRE, AND SPECIAL SHAPES, ROLLED, DRAWN OR COLD FINISHED 6061. |
| NNN-T-580 Base Document:1963 | TONGS, LABORATORY (S/S BY A-A-51358) |
| WW-P-404 Revision D:1973 | Pipe, Steel (Seamless and Welded, Black and Zinc Coated) (Galvanized) (S/S by ASTM-A53) |
| GG-B-00686 Revision D:1973 | BROACHES, PULP CANAL, BARBED, DENTAL (NO S/S DOCUMENT) |
| ASTM F 771 : 1999 : EDT 1 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| GGG-P-00335 Revision A:1970 | PIKE POLE (NO S/S DOCUMENT) |
| L-P-393 Revision A:1964 | Plastic Molding Material Polycarbonate, Injection and Extrusion (S/S by ASTM-D3935) |
| KK-L-291 Revision G:1969 | Leather, Cattlehide, Upholstery (S/S by Mil-DTL-32071) |
| MIL-C-83360 Revision C:1975 | Cleaning and Lubricating Compound, Electrical Contact (S/S by MIL-PRF-29608) |
| MMM-A-187 Revision B:1968 | ADHESIVE, EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH, GENERAL PURPOSE (S/S BY A-A-3053) |
| L T 0030 : NOTICE 1 | TAB, SIGNAL, PLASTIC, TAB SET, SIGNAL, PLASTIC |
| AA-C-295 Revision A Interim Revision:1963 | Chair, Rotary, Steel Tubular, Special Purpose (S/S by A-A-3113) |
| HH-M-351 Revision E:1976 | Millboard, Asbestos (No S/S Document) |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (NO S/S DOCUMENT) |
| NNN-B-300 Revision A:1977 | BLOOD COLLECTING CULTURE UNIT, LABORATORY (NO S/S DOCUMENT) |
| SS-T-312 Revision B:1974 | TILE, FLOOR: ASPHALT, RUBBER, VINYL, AND VINYL-ASBESTOS (S/S BY ASTM-F1066 AND ASTM-F1700) |
| O-L-160 Revision A:1967 | Leak Preventive Compound, Radiator (No S/S Document) |
| GGG-S-001333 Revision A Interim Revision:1975 | SCRAPER AND SQUEEGEE, VEHICLE WINDOW (S/S BY A-A-3070) |
| NNN-G-692 Revision C:1970 | GRADUATE, LIQUID, LABORATORY (S/S BY A-A-51344) |
| L-R-00335 Revision A:1966 | Ribbon, Flagging, Surveyor\'s Plastic (S/S by A-A-1822, A-A-1823, and A-A-1824) |
| GG-S-743 Revision C:1975 | Stand, Surgical Instrument |
| DD-G-511 Revision E:1983 | Glass Tubing, Round (No S/S Document) |
| WW-C-1692 Revision A:1973 | Coupling Assembly and Mender, Hose (Plastic and Rubber) (S/S by A-A-2921) |
| AA-B-00540 Revision D Interim Revision:1978 | BOOKCASE SECTIONS, BASE AND TOP, STEEL, CONTEMPORARY STYLE (NO S/S DOCUMENT) |
| L-P-370 Revision C:1972 | PLASTIC FILM, SHEET AND STRIP (POLYVINYL CHLORIDE, COPOLYMER OF VINYLIDENE CHLORIDE AND VINYL CHLORIDE, OR POLYETHYLENE) (S/S BY A-A-1742) |
| GG-C-00620 Revision F:1976 | COUNTER, RECIPROCATING, HANDHELD (S/S BY A-A-2723) |
| GGG-P-00340 Revision A Interim Revision:1967 | Pin Straightener, Electron Tube (No S/S Document) |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT (S/S BY A-A-54909) |
| PPP P 700 : C NOTICE 1 | PROTECTOR, PACKING LIST |
| ASTM C 222 : 1997 | Standard Specification for Asbestos-Cement Roofing Shingles |
| GGG-P-453 Revision A:1965 | Plate, Surface, Cast Iron |
| GGG-D-00643 Revision A Interim Revision:1968 | Driftpin (Double Taper) (No S/S Document) |
| MIL-R-0050068 Revision D:1983 | RING, CRIMPING (FOR ABC-M17 MASK) (NO S/S DOCUMENT) |
| GGG-C-2773 Base Document:1992 | CYLINDER RECONDITIONING AND CORRECTION EQUIPMENT: PORTABLE (NO S/S DOCUMENT) |
| MMM-A-260 Revision C:1984 | ADHESIVE, WATER-RESISTANT, (FOR SEALING WATERPROOFED PAPER) |
| GGG-B-461 Revision A:1966 | Block, Step, Machinists (No S/S Document) |
| MIL-P-51396 Revision A:1979 | PUMP UNIT, LIQUID VACUUM, POWER DRIVEN (NO S/S DOCUMENT) |
| GGG-V-445 Revision A:1966 | VICE, WOODWORKER'S AND PATTERNMAKER'S |
| EE-M-131 Revision G:1979 | MAYONNAISE AND SALAD DRESSING (S/S BY A-A-20140) |
| MIL-C-51177 Revision B:1974 | Coupling, Canister, ABC-M1 |
| HHH-V-1867-3 Revision A:1975 | LETTUCE, FRESH, READY-TO-USE (S/S BY A-A-20173) |
| GGG-J-60 Revision A:1967 | JACK KIT, HYDRAULIC, HAND (WITH TRUCK OR CHEST) (NO S/S DOCUMENT) |
| GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NON PORTABLE (HEAT AND MOISTURE STABLE) (NO S/S DOCUMENT) |
| MIL S 19491 : G | SEMICONDUCTOR DEVICE, PACKAGING OF |
| ZZ-T-381 Revision Q:1989 | Tires, Pneumatic, Vehicular (Highway) |
| QQ-B-575 Revision C:1993 | Braid, Wire (Copper, Tin Coated, or Silver Coated, Tubular, or Flat) (S/S by A-A-59569) |
| MIL-E-51390 Revision A:1979 | Electronic Module Assembly (No S/S Document) |
| O-E-950 Revision A:1975 | EXTRACT, QUEBRACHO (NO S/S DOCUMENT) |
| GGG-B-500 Revision D:2015 | Block, Tackle, (Wire-Rope) |
| ASTM C 668 : 1998 | Standard Specification for Asbestos-Cement Transmission Pipe |
| GG-S-00792 Base Document:1963 | Stylus, Duplicating Stencil (S/S by A-A-138) |
| AA-C-001870 Base Document:1974 | Costumer, Metal, Contemporary Style (S/S by A-A-2112) |
| TT C 00598 : C | CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| HH-P-46 Revision E:1975 | Packing: Asbestos, Sheet, Compressed (See Notice 2 for Replacement Information) |
| DD-G-1403 Revision C:1983 | GLASS, FLOAT, SHEET, FIGURED, COATED (HEAT-STRENGTHENED AND TEMPERED) (S/S BY ASTM-C1048) |
| AASHTO MP 18M/MP 18 : 1900 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| MIL-DTL-28786 Revision D:2014 | Switches, Electrical and Fiber Optic, Packaging of |
| PPP-P-40 Revision C:1998 | PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOOD WORKING MACHINERY (NO S/S DOCUMENT) |
| TT I 00559 : C | INK, MARKING STENCIL, OPAQUE, FOR POROUS SURFACES (WOOD BOXES, FIBER CARTONS ETC.) |
| MIL-F-51367 Revision B:1979 | Filter and Utilities Unit, Chemical-Biological Shelter System, Trailer Mounted: M68 (No S/S Document) |
| JJJ-A-00711 Revision E:1957 | ASPARAGUS, CANNED |
| RR-K-795 Revision A:1974 | KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS) |
| GG-O-588 Revision B:1964 | OPENER, LETTER, HAND, METAL (S/S BY A-A-135) |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN & PENCIL, WITH CASE (S/S BY A-N-50201) |
| MIL-C-17112 Revision A:1973 | Copper-Nickel-Zinc Alloy (Nickel-Silver): Castings (No S/S Document) |
| L-S-626 Revision C:1967 | Sponges, Synthetic (No S/S Document) |
| MMM-A-134 Base Document:1970 | Adhesive, Epoxy Resin, Metal to Metal Structural Bonding |
| HH-G-156 Revision E:1993 | Gasket Material, General Purpose; Rubber Sheets, Strips, and Special Shapes |
| AA-D-170 Revision A:1976 | DESK, FLAT TOP (S/S BY A-A-50897) |
| ASTM F 3308/F3308M : 2018 | Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications |
| AA-B-551 Revision D:1973 | BOOKENDS, STEEL (S/S BY A-A-2895) |
| GG-T-585 Revision B:1986 | TONOMETER, OPHTHALMIC, SCHIOTZ (S/S BY A-A-54044) |
| QQ-G-547 Revision B:1975 | Gold Leaf (No S/S Document) |
| TT-I-540 Revision C:1973 | INK, NUMBERING AND DATING MACHINE (S/S BY A-A-2751) |
| GG S 00750 : B | STENCIL DUPLICATING PRINT KIT, HAND STAMP |
| LLL-T-1332 Revision A:1973 | Toothpicks (Wood) ( S/S by A-A-1056) |
| MMM-A-185 Revision B:1974 | ADHESIVE, RUBBER (FOR PAPER BONDING) |
| TT-I-542 Revision E:1975 | INK, MARKING, LAUNDRY, BLACK (NO S/S DOCUMENT) |
| FF-P-00416 Revision F:1971 | PIN, SAFETY (S/S BY A-A-119) |
| P-W-155 Revision C:1978 | Wax, Floor, Water-Emulsion (No S/S Document) |
| DDD-C-48 Revision E:1968 | CAP, OPERATING, SURGICAL, GREEN (NO S/S DOCUMENT) |
| HH-I-525 Revision A:1968 | Insulation Board, Thermal, Cork (Use ASTM-C640) |
| PPP-P-1998 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR STORAGE SECTIONS, OVERFILE, STEEL (NO S/S DOCUMENT) |
| BBB-S-1268 Revision B:1973 | Sweat Shirt (S/S by A-A-55289) |
| GG-O-635 Revision A:1977 | Optical Flats (S/Sby A-A-58051) |
| GG-C-620 Revision C:1962 | COUNTER, RECIPROCATING, HANDHELD (S/S BY A-A-2723) |
| GG-B-00821 Revision E:1976 | BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE (S/S BY A-A-54292) |
| MIL-W-51258 Revision A:1974 | WINTERIZATION KIT, FACEPIECE, CHEMICAL BIOLOGICAL MASK, TANK, M3 (NO S/S DOCUMENT) |
| FF-S-107 Revision C:1969 | Screw, Tapping and Drive |
| GG-T-621 Revision C:1985 | Transit, One Minute, and Transit Tripods |
| GG S 208 : NOTICE 1 | SEPARATOR, TEETH, DENTAL, ELLIOTT, CURVED-JAW |
| MIL-N-51287 Revision C:1983 | NOSECUP ASSEMBLIES, CHEMICAL BIOLOGICAL MASK, C10 (NO S/S DOCUMENT) |
| ASTM F 1803 : 2015 | Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
| ASTM D 2680 : 2001 : R2009 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| GGG-T-671 Revision C:1992 | TROWELS (NO S/S DOCUMENT) |
| PPP-B-587 Revision B:1987 | BOX, WOOD, WIREBOUND PALLET TYPE (S/S BY ASTM-D6254) |
| GG-F-615 Base Document:1961 | FORCEPS, SPLINTER (S/S BY A-A-54907) |
| L-P-375 Revision D:1994 | PLASTIC FILM, FLEXIBLE, VINYL CHLORIDE (S/S BY ASTM-D1593) |
| GG-H-0080 Revision A:1967 | HANDLE AND BLADE SET, SURGICAL KNIFE, DETACHABLE BLADE (NO S/S DOCUMENT) |
| GGG-C-430 Revision A:1967 | CLEANER, VALVE STEM GUIDE |
| QQ-C-533 Revision B:1972 | Copper-Beryllium Alloy Strip (Copper Numbers 170 and 172) (S/S by ASTM-B194) |
| P-D-455 Revision D:1975 | Disks, Abrasive, Aluminum-Oxide (S/S by A-A-1016) |
| GGG-O-599 Revision B:1963 | OPENER, CRATE (S/S BY A-A-2554) |
| H-B-771 Revision B:1966 | BRUSHES, WIRE, ROTARY, GENERAL PURPOSE (NO S/S DOCUMENT) |
| WW-H-171 Revision E:1977 | Hangers and Supports, Pipe (for Civil Agencies S/S by A-A-1192; for DOD S/S by MSS-SP-58,MSS-SP-69, NFPA11, NFPA12, NFPA13, NFPA14, NFPA15, NFPA16, and NFPA17) |
| GGG-S-731 Revision A Interim Revision:1967 | Stakes, Sheet Metalworking; and Plate, Bench Stakeholder (No S/S Document) |
| T-O-56 Revision A:1970 | Oakum, Marine |
| A-A-2098 Revision B:1991 | WRAPPER, COIN (NO S/S DOCUMENT) |
| AA-C-112 Revision D:1976 | CARTS, SURGICAL DRESSING (S/S BY A-A-54219) |
| GGG-S-278 Revision B:1994 | SHEARS AND SCISSORS (NO S/S DOCUMENT) |
| GG-G-00650 Revision A:1970 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE (S/S BY A-A-53239) |
| MIL P 0050085 : D | PRECLEANER, AIR PURIFIER, M1A1 |
| GGG C 00748 : C | CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS |
| MIL-C-51386 Revision A:1979 | Case, Detector Unit, Chemical Agent Automatic Alarm (No S/S Document) |
| GGG-B-110 Revision A:1966 | BAR, COMBINATION PRY AND SCRAPER (S/S BY A-A-2881) |
| ASTM B 32 : 2008 : R2014 | Standard Specification for Solder Metal |
| NNN D 350 : A NOTICE 1 | DISH GUM TEST |
| DD-B-601 Base Document:1959 | BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS (NO S/S DOCUMENT) |
| NNN-T-698 Base Document:1963 | TRIPOD, LABORATORY APPARATUS (S/S BY A-A-53948) |
| RR W 375 : A NOTICE 1 | WIRE, FABRIC, STEEL, WELDED, (FOR REINFORCED CONCRETE) |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| L R 00350 : A | RIBBONS, TYPEWRITER AND COMPOSING MACHINE, CHANGEABLE TYPE STYLE, POLYETHYLENE |
| P-S-120 Revision B:1977 | SCALE REMOVING COMPOUND (SOLID AND LIQUID FORM) (S/S BY A-A-19 AND A-A-33) |
| L-P-519 Revision C:1977 | Plastic Sheet: Tracing, Glazed and Matter Finish |
| GG S 00176 : C | SCREEN, X-RAY INTENSIFYING |
| NNN E 00920 : B | EXTRACTION ASSY |
| DDD-T-551 Revision K:1977 | Towel, Bath, Cotton, Terry (S/S by A-A-866) |
| HH-I-545 Revision B:1971 | Insulation, Thermal and Acoustical (Mineral Fiber, Duct Lining Material) (S/S by ASTM-C1071) |
| AA-V-200 Revision B Interim Revision:1973 | Venetian Blinds (No S/S Document) |
| UU-C-225 Revision A:1972 | CARTON, EGG (S/S BY A-A-689) |
| PPP-C-850 Revision D:1964 | Cushioning Material, Polystyrene Expanded, Resilient (for Packaging Uses) |
| GG-F-355 Revision A:1975 | FINGERPRINT IDENTIFICATION KITS (NO S/S DOCUMENT) |
| KK-W-266 Revision A:1961 | WHEEL BUFFING, CHAMIOS, DENTAL (S/S BY A-A-51064) |
| LLL B 800 : B NOTICE 1 | BUILDING BOARD (WOOD PARTICLEBOARD) HARD PRESSED VEGETABLE FIBER |
| FF-C-88 Revision C:1971 | Casters, Rigid and Swivel, Industrial Duty (S/Sby ASME-B56.11.1) |
| PPP-P-115 Revision D:1973 | Pads, Paper, Macerated (No S/S Document) |
| JJJ-C-561 Revision E:1978 | COTTON, PURIFIED (STERILE) AND NONSTERILE (NO S/S DOCUMENT) |
| LLL-C-83 Revision B:1977 | CANE, WALKING (S/S BY A-A-30090) |
| QQ-B-654 Revision A:1980 | BRAZING ALLOYS, SILVER |
| FF-W-1825 Revision A:1976 | WOOL AND GAUZE, METALLIC (S/S BY A-A-1043) |
| PPP-B-676 Revision E:1992 | Boxes, Setup |
| JJJ-P-630 Revision C:1979 | POTATOES, WHITE, DEHYDRATED (S/S BY A-A-20032) |
| O-S-598 Revision B:1975 | SODIUM HYDROXIDE, TECHNICAL (S/S BY ASTM-D456) |
| GG-S-773 Revision D:1978 | Straightedge: Plastic and Wood (No S/S Document) |
| L-H-00575 Base Document:1966 | HOLDER, DESK MEMORANDUM PAPER, SHEET TYPE (S/S BY A-A-2988) |
| UU T 54 : E | TAB, INDEX, GUMMED |
| DD-F-786 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, PROCELAIN, BUCHNER TYPE (NO S/S DOCUMENT) |
| ZZ-R-768 Revision B:2009 | Rubber for Mountings (Unbonded-Spool and Compression Types) |
| JJJ-B-81 Revision E:1976 | BALL, ABSORBENT, COTTON OR RAYON, NON STERILE (NO S/S DOCUMENT) |
| TT-I-563 Revision F:1975 | INK, WRITING, FOR FOUNTAIN AND DIP PENS (S/S BY A-A-2752) |
| H B 00555 : B | BRUSH, SCRUB, VEGETABLE |
| GGG-B-440 Revision B:1964 | Blade, Circular Saw, Woodcutting |
| PPP-C-1266 Revision B:1969 | CONTAINER, THERMAL, SHIPPING, FOR MEDICAL MATERIAL REQUIRING CONTROLLED TEMPERATURE RANGES (NO S/S DOCUMENT) |
| UU-P-270 Revision F:1970 | PAPER, WRAPPING, WAXED (DRY) (S/S BY A-A-894) |
| GG-H-1212 Revision A:1975 | HAMMER, REFLEX TESTING, TAYLOR (S/S BY A-A-54845) |
| WW-C-621 Revision G:1990 | COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER- OR FABRIC-LINED AND UNLINED) (S/S BY A-A-59227) |
| RR-G-700 Revision B:1963 | GRIP, WIRE, STRAND, WIRE ROPE AND CABLE |
| GGG-J-65 Revision A:1965 | Jointer, Brick (No S/S Document) |
| MIL-C-10113 Revision C:1974 | Cover, Outlet Valve (For C15 Outlet Valve) |
| W-T-631 Revision C:1961 | Transformer, Power Distribution (No S/S Document) |
| GG-F-620 Base Document:1960 | FORCEPS, TOWEL (S/S BY A-A-54514) |
| GGG-P-441 Revision A:1965 | Plate, Angle, Adjustable and Solid (No S/S Document) |
| KK-L-201 Revision F:1963 | Leather, Cattlehide, Lace, and Cut Laces (S/S by MIL-DTL-32089) |
| KK-P-001170 Revision A:1968 | Portfolio, Envelope, Leather, Artificial, Leather, Slide Fastener (S/S by A-A-974) |
| GGG-S-190 Revision A:1965 | SEAMER SHEET METAL, HAND (NO S/S DOCUMENT) |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR (S/S BY TT-C-542) |
| ZZ-C-730 Revision A:1973 | Cups and Glides, Furniture (S/S by A-A-1194 and A-A-1196) |
| GG-S-325 Base Document:1961 | SHIELD, EYE, SURGICAL, FOX (S/S BY A-A-54887) |
| LLL-S-720 Revision A:1974 | Stirring Stick, Beverage, (Wood) (S/S by A-A-1081) |
| U-T-00190 Revision A:1964 | TEST PAPER AND COLOR CHART, GLUCOSE IN URINE, 100 TESTS (S/S BY A-A-54704) |
| L-P-315 Revision C:1972 | Pipe, Plastic (Polyethylene, PE, SDR-PR) (S/S by ASTM-D3309 and ASTM-D2239) |
| MIL R 39032 : D | RESISTOR, PACKAGING OF |
| ZZ-A-605 Revision B:1966 | Apron, Laboratory (S/Sby A-A-3104) |
| MIL-F-36748 Base Document:1971 | Funnel, Common, Laboratory Polyethylene, Outside Ribbed (S/S by A-A-54705) |
| H-B-00681 Revision D:1968 | BRUSH, TYPEWRITER (S/S BY A-A-3077) |
| HH-P-119 Revision A:1967 | Packing Material, Sewer Joint, Asphalt-Saturated Cellulose-Fiber (No S/S Document) |
| GG-C-00716 Revision C:1990 | CRUTCHES, ADJUSTABLE (S/S BY A-A-30071) |
| GGG-S-630 Revision D:1986 | SPREADER, TIRE, (PNEUMATICALLY OPERATED) (NO S/S DOCUMENT) |
| NNN-B-001291 Base Document:1996 | BASKET, TEST TUBE (NO S/S DOCUMENT) |
| HH-P-41 Revision D:1986 | Packing, Asbestos, Rope and Wick (S/S by MIL-P-70343) |
| NNN-G-690 Base Document:1963 | GRADUATE, LIQUID, LABORATORY, PLASTIC (NO S/S DOCUMENT) |
| GG-P-118 Revision C:1975 | PARALLEL RULERS, FOLDING TYPE (S/S BY A-A-50212) |
| GG-B-426 Revision B:1960 | BLOCK, BITE (NO S/S DOCUMENT) |
| DD-G-451 Revision D:1977 | Glass, Float or Plate, Sheet, Figured (Flat, for Glazing, Mirrors and Other Uses) |
| GGG-C-330 Revision C:1967 | Chisel, Tool Blank, Calking Tool and Metal-Forming Tool, Power Hammer (S/S by A-A-3090 and A-A-3091) |
| GGG-C-800 Revision B:1964 | CUTTER, WIRE ROPE, HAND OPERATED (S/S BY A-A-3029) |
| AA-B-60 Base Document:1959 | BASSINET AND DRESSING TABLE COMBINATION, HOSPITAL, CORROSION-RESISTING STEEL (NO S/S DOCUMENT) |
| MIL S 0050087 : D | SEPARATOR, DUST |
| HHH-V-1867-4 Base Document:1974 | ONIONS, DRY, READY-TO-USE |
| HH-R-590 Revision B:1976 | ROOFING FELT (ASBESTOS, ASPHALT SATURATED) (NO S/S DOCUMENT) |
| GGG-C-137 Revision A:1964 | CAP, VISE JAW (S/S BY A-A-2938) |
| GGG W 00656 : 0 | WRENCH, SOCKET (SET, SPARK PLUG, HAND, INCLUDING HANDLES AND ATTACHMENTS) |
| GGG-H-20 Revision A:1961 | HAMMER, HAND, (BODY AND FENDER, FORGED STEEL HEAD) (NO S/S DOCUMENT) |
| QQ-C-576 Revision B:1961 | Copper Flat Products with Slit and Edge-Rolled, Sheared, Sawed or Machined Edges, (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B152) |
| GG-L-340 Base Document:1960 | LIGHT, COLOR PERCEPTION TESTING (NO S/S DOCUMENT) |
| O-S-634 Revision B:1970 | Sodium Nitrate, Technical (Nitrate of Soda) (No S/S Document) |
| MIL-V-50081 Revision F:1976 | VALVE, INLET, CHEMICAL-BIOLOGICAL MASK, C20R1 (NO S/S DOCUMENT) |
| GGG-R-00395 Base Document:1966 | RIVETER, BLIND, HAND AND HEADS (S/S BY A-A-3043) |
| MIL-C-10857 Revision D:1974 | Cloth, Antifogging |
| MIL-Z-63472 Base Document:1980 | ZINC-ALUMINUM SUPERPLASTIC ALLOYS FOR THERMO FORMING, DEEP DRAWING AND STRETCH FORMING (NO S/S DOCUMENT) |
| O-S-605 Revision D:1967 | SODIUM SILICATE SOLUTION (NO S/S DOCUMENT) |
| HH-I-1972-6 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACE WITH MINERAL FIBERBOARD ON ONE SIDE OF THE FOAM AND GLASS MAT ON THE OTHER SIDE OF THE FOAM (NO S/S DOCUMENT) |
| FF-H-1820 Base Document:1974 | Hardware, Builders, Exit Devices (S/S by BHMA-A156.3) |
| GGG-W-680 Revision A:1964 | WRENCH, TAP AND REAMER, ADJUSTABLE (NO S/S DOCUMENT) |
| X-K-001274 Revision A:1969 | Kit,Classified Document Destructor, Drum Type (No S/S Document) |
| A-A-2757 Base Document:1991 | Pencil, Carpenter (No S/S Document) |
| L-P-397 Revision C:1977 | PLASTIC MOLDING MATERIAL, CELLULOSE ACETATE (S/S BY ASTM-D706) |
| FF-C-436 Revision F:1988 | CLIP, PAPER, WIRE (S/S BY A-A-2601) |
| MIL-V-0050065 Revision C:1977 | VALVE, NOSECUP (NO S/S DOCUMENT) |
| GG-S-805 Revision B:1977 | SURVEYOR, DENTAL CLASP (S/S BY A-A-54079) |
| GGG-V-412 Revision B:1994 | VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING, TUBE (NO S/S DOCUMENT) |
| MMM-A-137 Revision D:1976 | ADHESIVE, RESILIENT FLOORING (WATER SOLUBLE) (S/S BY A-A-3139) |
| ASTM C 725 : 1990 : R2008 | Standard Specification for Semidense Mineral Fiber Siding |
| FF-P-110 Revision J:1997 | Padlock, Changeable Combination (Resistant to Opening by Manipulation and Surreptitious Attack) |
| GGG-N-350 Revision A:1959 | Nippers and Pincers (S/S by ASME-B107.11M) |
| QQ-W-423 Revision B:1969 | Wire, Steel, Corrosion-Resisting (S/S by ASTM-A313 and ASTM-A580) |
| GG-B-814 Revision B:1959 | BURNER, ALCOHOL, PRESSURE-TYPE (NO S/S DOCUMENT) |
| L-P-390 Revision C:1971 | Plastic, Molding and Extrusion Material, Polyethylene and Copolymers (Low, Medium, and High Density) |
| ASTM A 159 : 1983 : R2015 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 823 : 1999 : R2003 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| UU-C-1846 Base Document:1975 | COAT, LABORATORY, DISPOSABLE (NO S/S DOCUMENT) |
| GGG-M-125-6 Revision B:1985 | Respirator Assembly: Half Mask, Air-Purifying, Combination Chemical Cartridge and Filter (for Paint Spray and Organic Vapors) (No S/S Document) |
| FED-STD-802 Base Document:1991 | PACKAGING OF SYNTHETIC FIBER FABRICS (NO S/S DOCUMENT) |
| O-C-650 Revision B:1975 | CORRECTION FLUID, WHITE, OPAQUE, AND THINNER (NO S/S DOCUMENT) |
| WW-P-401 Revision F:1989 | PIPE AND PIPE FITTINGS, CAST-IRON, SOIL (S/S BY ASTM-A74 AND CISPI301) |
| A-A-976 Revision A:1980 | PENCIL, LEAD DRAWING (NO S/S DOCUMENT) |
| O-F-506 Revision C:1987 | FLUX, SOLDERING: PASTE AND LIQUID (S/S BY A-A-51145) |
| O-O-690 Revision C:1992 | OXALIC ACID, DIHYDRATE, TECHNICAL (S/S BY A-A-59121) |
| AA-B-001596 Revision A Interim Revision:1974 | Bookcase, Wood, General Office |
| GGG-C-771 Revision D:1964 | CUTTERS, PIPE; AND CUTTERS, TUBE (NO S/S DOCUMENT) |
| AASHTO M 281 : 1996 | SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES, HOT-WROUGHT |
| W-B-101 Revision J:1982 | BATTERY, DRY (S/S BY ANSI-C18.1) |
| GGG-M-125-9 Revision A:1982 | RESPIRATOR ASSEMBLIES, AIR LINE, HOOD AND HELMET, (FOR ABRASIVE BLASTING OPERATIONS) (NO S/S DOCUMENT) |
| ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| SAE AS4491A | Plastic Disposable Cartridge, Plunger, Nozzles and Cartridge Assembly |
| BB-S-1419 Base Document:1970 | SULFUR HEXAFLUORIDE, TECHNICAL GRADE (S/S BY ASTM-D2472) |
| ASTM A 805/A805M : 2009 : R2016 | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
| VV L 765 : A NOTICE 1 | LUBRICANT, ENCLOSED-GEAR, NONEXTREME-PRESSURE |
| ASTM A 220/A220M : 1999 : R2004 | Standard Specification for Pearlitic Malleable Iron |
| NNN-M-560 Base Document:1962 | MORTAR AND PESTLE (NO S/S DOCUMENT) |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED (NO S/S DOCUMENT) |
| H-B-621 Revision F:1958 | BRUSH, STENCIL (S/S A-A-2903) |
| DD-F-776 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, GLASS, BUCHNER TYPE (NO S/S DOCUMENT) |
| L-P-1040 Revision B:1977 | Plastic Sheets and Strips (Polyvinyl Fluoride) |
| MIL-B-43064 Revision C:1981 | Binder, Loose Leaf (Equipment Logbook) (No S/S Document) |
| L F 00334 : E | FILM, PHOTOGRAPHIC, ROLL, MICROFILM (BLACK AND WHITE) |
| GG-H-00566 Revision B:1970 | HOLDER, DESK MEMORANDUM PAPER, ROLL TYPE (NO S/S DOCUMENT) |
| DDD-C-95 Base Document:1965 | CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC (NO S/S DOCUMENT) |
| GGG-T-20 Revision B:1964 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED) AND STAPLE, TACKER (NO S/S DOCUMENT) |
| FF-C-82 Revision B:1967 | CASTER, SWIVEL CHAIR (S/S BY A-A-1011) |
| AA-B-605 Revision A:1973 | Box, Filing, Steel |
| GG-M-1262 Revision A:1972 | Marker, Tube Type White |
| FF-N-105 Revision B:1971 | Nails, Brads, Staples and Spikes: Wire, Cut and Wrought (No S/S Document) |
| H-B-531 Revision C:1962 | BRUSH, SCRUB, DECK |
| MIL-M-55565 Revision C:1988 | MICROCIRCUITS, PACKAGING OF (S/S BY MIL-STD-2073/1) |
| L-P-517 Revision C:1967 | Plastic Sheet, Scribe-Coated (No S/S Document) |
| HH-I-00536 Revision A:1963 | Insulation, Electrical, MICA, Natural Muscovite (No S/S Document) |
| GGG-P-00770 Revision A Interim Revision:1967 | Puller, Fuse (No S/S Document) |
| UU-B-00344 Base Document:1970 | BINDER, LOOSE-LEAF, MULTIPLE RING TYPE (NO S/S DOCUMENT) |
| KK-S-756 Revision D:1971 | Strop, Microtome Knife; and Strop, Razor (No S/S Document) |
| TT-I-600 Revision C:1975 | INKING PAD, RUBBER STAMP |
| GG-B-00120 Revision B:1969 | BASEPLATE, DENTAL (NO S/S DOCUMENT) |
| NNN-B-789 Base Document:1963 | BURET, STRAIGHT, PRECISION (USE A-A-51248/15) |
| AASHTO M 275M/M 275 : 2008 : R2012 | SPECIFICATION FOR UNCOATED HIGH-STRENGTH STEEL BARS FOR PRESTRESSING CONCRETE |
| NNN-F-001643 Base Document:1971 | FORCEPS, MICROSCOPE COVER GLASS (S/S BY A-A-53609) |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) (S/S BY A-A-55543) |
| L-S-281 Revision C:1963 | SHIELD, ERASING, TYPISTS\' (S/S BY A-A-2878) |
| L-C-566 Revision C:1957 | COMB, HAIR (PLASTIC) |
| GGG-B-471 Revision B:1964 | Blade, Coping Saw, and Blade, Jewelers Saw |
| NNN C 1494 : A NOTICE 1 | CUP BLOOD SAMPLE |
| LLL C 00110 : A | CASE, FILING, TRANSFER, WOOD OR FIBER |
| MIL-D-0010132 Revision K:1981 | Discs, Valve (No S/S Document) |
| TT I 00521 : A | INK, COPYING AND RECORD |
| GG-S-770 Revision B:1976 | STRIP, ABRASIVE, DENTAL (NO S/S DOCUMENT) |
| GG C 871 : C | CURVES, DRAFTING, REGULAR, AND IRREGULAR, CURVE SET, DRAFTING, REGULAR, AND IRREGULAR (GENERAL SPECIFICATION) |
| L-B-1283 Revision A:1977 | BAG, SOILED CLOTHES (WATER SOLUBLE PLASTIC) (S/S BY A-A-1223) |
| WW-T-791 Revision A:1971 | Tube, Brass, Seamless (S/S by ASTM-B135) |
| FF-H-1819 Base Document:1974 | HARDWARE, BUILDERS\'; AUXILIARY LOCKS (S/S BY A-A-1932) |
| FF-N-180 Revision A:1966 | NEEDLES, EXCEPT SURGICAL, HAND (S/S BY A-A-55066) |
| GGG-F-325 Revision B:1966 | FILE, HAND (AMERICAN PATTERN) AND RASP, HAND (NO S/S DOCUMENT) |
| CCC-C-444 Revision D:1973 | Cloth, Jean, Cotton (S/SbyA-A-50162) |
| L-P-1035 Revision A:1974 | PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE-VINYL ACETATE COPOLYMER, RIGID (S/S BY ASTM-D1784) |
| UU-B-36 Revision J:1970 | Bags, Paper (Grocers) |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| TT-V-109 Revision C:1978 | VARNISH, INTERIOR, ALKYD-RESIN (S/S BY A-A-1788) |
| ASTM D 2282 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
| AASHTO M 31M/M 31 : 2015 | STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT |
| TT I 00547 : B | INK, NUMBERING MACHINE, FOR PHOTOGRAPHIC NEGATIVES |
| LLL-C-001491 Base Document:1969 | CASE, FILING, TRANSFER, KNOCKDOWN (NO S/S DOCUMENT) |
| GGG-E-926 Revision B:1963 | Extractor, Cotter-Pin (S/S by A-A-385) |
| BB-O-925 Revision A:1961 | Oxygen, Technical, Gas and Liquid (S/S by CGA-G4) |
| PPP-S-1927 Revision A:1976 | SACK, SHIPPING, PAPER (REINFORCED) (S/S BY A-A-157) |
| PPP-B-650 Revision B:1975 | BOXES, CORRUGATED FIBERBOARD, SPECIAL PURPOSE (RECORDS RETIRING) |
| JJJ B 0087 : NOTICE 1 | BALL, GAUZE |
| HH-B-100 Revision B:1973 | Barrier Material Vapor (for Pipe, Duct and Equipment Thermal Insulation) (S/S by ASTM-C1136) |
| QQ-B-655 Revision C:1987 | BRAZING ALLOYS, ALUMINUM AND MAGNESIUM, FILLER METAL (S/S BY AWS-A5.8) |
| MIL-M-51392 Revision A:1979 | METER, FLOW RATE INDICATING, FLOAT TYPE (NO S/S DOCUMENT) |
| GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER (S/S BY A-A-59662 AND A-A-59663) |
| GGG-W-642 Revision B:1963 | Wrench, Bung, (Nonsparking and Nonmagnetic) (No S/S Document) |
| GGG S 0065 : B (1) | SAW, HAND |
| GGG-B-101 Revision D:1963 | BAR, CHISEL, PINCH, PRY, WRECKING, DIGGING, TAMPING, DIGGING AND TAMPING, AND CROWBARS (S/S BY A-A-2562, A-A-2563, A-A-2564, A-A-2565, A-A-2566, A-A-2567, A-A-2568 AND A-A-2879) |
| PPP B 1714 : NOTICE 1 | BAGS, SHIPPING, WOVEN POLYPROPYLENE |
| L-P-50 Revision B:1966 | PAD, SCOURING |
| GGG-D-647 Revision A:1965 | DRILL BLANKS AND DRILL BLANK SETS (NO S/S DOCUMENT) |
| O-T-634 Revision C:1984 | TRICHLOROETHYLENE, TECHNICAL (S/S BY ASTM-D4080) |
| FF-C-77 Revision C:1986 | CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY) (S/S BY A-A-55617 AND A-A-55619) |
| ASTM F 1183 : 1996 : R2011 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| AA-F-00300 Base Document:1965 | FILE, ROLL DRAWING (NO S/S DOCUMENT) |
| SS-C-153 Revision C:1974 | Cement, Bituminous, Plastic |
| ASTM C 1448/C1448M : 2005 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| AA-S-704 Revision A:1971 | STOOL, STEP, CASTER MOUNTED, SAFETY (S/S BY A-A-3116) |
| GGG-S-595 Revision B:1972 | Soldering Irons, Nonelectric, (Coppers) (S/Sby A-A-50971) |
| AASHTO MP 30M/MP 30 : 2017 | SPECIFICATION FOR STEEL WIRE AND WELDED WIRE, PLAIN AND DEFORMED, FOR CONCRETE REINFORCEMENT |
| AASHTO M 279 : 2014 | SPECIFICATION FOR METALLIC-COATED, STEEL WOVEN WIRE FENCE FABRIC |
| ASTM B 163 :2011 | Standard Specification for Seamless Nickel and Nickel Alloy (UNS N06845) Condenser and Heat-Exchanger Tubes |
| SAE AMSQQA225C | Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For |
| ASTM F 2762 : 2011 | Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
| ASTM F 2807 : 2013 | Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM D 2235 : 2004 : R2011 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM F 2968/F2968M : 2014 | Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications |
| ASTM A 686 : 1992 : R1999 | Standard Specification for Tool Steel, Carbon |
| ASTM A 702 : 2013-11 | SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT |
| ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM F 1533 : 2001 | Standard Specification for Deformed Polyethylene (PE) Liner |
| ASTM C 1448/C1448M : 2005 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| ASTM E 784 : 1989 : R2005 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM C 1447/C1447M : 2004 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM E 785 : 1981 : R2017 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM A 818 : 2006 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM D 6573/D6573M : 2013 : REDLINE | Standard Specification for General Purpose Wirebound Shipping Boxes |
| ASTM D 2513 : 2017-01 | SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
| ASTM F 1483 : 2017 : REDLINE | Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
| ASTM C 296 : 2000 | Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM C 221 : 1998 : R2008 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| ASTM E 784 : 1989 : R1996 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM F 2987 : 2012 | Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications |
| ASTM C 508 : 2000 : EDT 1 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| ASTM B 211M : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) |
| ASTM F 1282 : 2017 : REDLINE | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ASTM C 746 : 1990 : R1998 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| ASTM B 102 : 2000 | Standard Specification for Lead- and Tin-Alloy Die Castings |
| ASTM C 222 : 1997 : R2003 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM B 313M : 1988 | Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990) |
| ASTM F 1901 : 2016 : REDLINE | Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
| ASTM C 659 : 1990 : R1998 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM B 774 : 2000 : R2005 : EDT 1 | Standard Specification for Low Melting Point Alloys |
| ASTM E 784 : 1989 : R2011 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM B 361 : 2016 : REDLINE | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
| ASTM A 823 : 1999 : R2012 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM C 875 : 1998 : R2003 | Standard Specification for Asbestos-Cement Conduit |
| ASTM B 907 : 2016 : REDLINE | Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders |
| ASTM F 667/F667M : 2016 : REDLINE | Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings |
| ASTM F 2905/F2905M : 2013 | Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications |
| ASTM F 1504 : 2014 : REDLINE | Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM F 1345 : 2010 : REV A | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM B 865 : 2004 : R2015 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy<brk/> (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM D 1527 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| ASTM A 856/A856M : 2003 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM F 1871 : 2011-06 | SPECIFICATION FOR FOLDED/FORMED POLY (VINYL CHLORIDE) PIPE TYPE A FOR EXISTING SEWER AND CONDUIT REHABILITATION |
| AASHTO M 105 : 2009(R2018) | SPECIFICATION FOR GRAY IRON CASTINGS |
| ASTM A 159 : 1983 : R1993 | Standard Specification for Automotive Gray Iron Castings |
| O M 00232 : H | METHANOL (METHYL ALCOHOL) |
| L-P-377 Revision C:1994 | Plastic Sheet and Strip, Polyester |
| KK-W-231 Revision D:1986 | WELTING, LEATHER, SHOE (NO S/S DOCUMENT) |
| MIL-V-51281 Revision C:1983 | Voicemitter Outlet Valve Assembly, Chemical Biological Mask, C29R5 (No S/S Document) |
| A-A-580 Revision A:1992 | LEAD HOLDER (NO S/S DOCUMENT) |
| ASTM A 752M : 2004 : R2010 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011) |
| VV-D-1078 Revision B:1983 | Damping Fluid, Silicone Base (Dimethyl Polysiloxane) |
| MIL C 64003 : A | CHARGE ASSEMBLY, EXPULSION FOR PROJECTILE, 15MM, SMOKE, M825 |
| ASTM C 668 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Transmission Pipe |
| ASTM B 774 : 2000 : R2010 | Standard Specification for Low Melting Point Alloys |
| AA-B-606 Revision D:1993 | BOX, FILING, WOOD (S/S BY A-A-2874) |
| GGG-C-475 Revision B:1973 | CLIPPERS, HAIR, HAND |
| UU-B-335 Revision A:1957 | BINDERS, LOOSE LEAF, (WITH OR WITHOUT FLEXIBLE PRONG) (S/S BY A-A-2658) |
| O-C-289 Revision G:1985 | CHLORINATION KIT, WATER PURIFICATION, (FOR TREATMENT OF DRINKING WATER) (NO S/S DOCUMENT) |
| UU B 25 : C NOTICE 1 | BAG, PAPER (INSULATED) |
| GGG G 00690 : A | GROOVERS, EDGERS, AND CORNER TOOLS - CONCRETE, HAND |
| LLL-B-650 Revision A:1965 | Box, Filing, Cloth, Wood or Fiber (No S/S Document) |
| NN-H-0085 Base Document:1964 | HANDLE, FILE (ADJUSTABLE TYPE) (NO S/S DOCUMENT) |
| ASTM B 199 : 2017 : REDLINE | Standard Specification for Magnesium-Alloy Permanent Mold Castings |
| ASTM A 511 : 2004 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| GGG-B-490 Revision F:1992 | Blocks, Tackle (Manila and Nylon Rope) (See Notice 1 for Replacement Information) |
| PPP-P-600 Revision G:1992 | PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL - REQUIREMENTS FOR PACKAGING OF (NO S/S DOCUMENT) |
| MIL-B-38721 Revision B:1980 | Boxes, Consolidation, Fiberboard and Polyolefin (No S/S Document) |
| P-S-411 Revision A:1955 | SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER (S/S BY A-A-50169) |
| O-C-105 Revision D:1974 | Calcium Chloride, Dihydrate and Calcium Chloride, Anhydrous, Technical (S/S by MIL-C-51511) |
| U-P-560 Revision A:1976 | BACITRACIN ZINC, NEOMYCIN SULFATE AND POLYMYXIN B SULFATE OPHTHALMIC OINTMENT (S/S BY A-A-54679) |
| L-T-940 Revision B:1973 | TYPE CLEANER, PLASTIC RUBBER TYPE (NO S/S DOCUMENT) |
| AA-D-001923 Base Document:1975 | DESK ATTACHMENTS, \"L\" RETURN PLATFORM, CONTEMPORARY STYLE (S/S BY A-A-2093) |
| GGG-S-58 Revision F:1993 | Saw, Radial Overarm, Woodworking (No S/S Document) |
| GG T 00750 : A | TUBE, DUODENAL, SURGICAL, REHFUSS |
| NNN F 289 : D NOTICE 1 | FLASK VOLUMETRIC |
| H B 00531 : D NOTICE 1 | BRUSH, SCRUB, DECK |
| H B 00621 : G | BRUSH, STENCIL |
| PPP-C-1337 Revision B:1976 | Containers, Composite; (Steel Drum with Polyethylene Insert) (S/S by A-A-58020) |
| GG-P-455 Revision B:1967 | PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM) |
| GG C 001321 : B | CASTING MACHINE, DENTAL METALS, AND REPLACEMENT PARTS |
| GGG-H-570 Revision A:1965 | HOLDER AND GUIDE, DRIVE PIN (NO S/S DOCUMENT) |
| GG-L-260 Revision E:1988 | LEVEL, SURVEYING: ABNEY TYPE (S/S BY A-A-52025) |
| GG-F-617 Base Document:1961 | FORCEPS, STERILIZER (S/S BY A-A-54906) |
| GGG-D-691 Revision B:1962 | DRILL, MASONRY, HAND AND HOLDER, MASONRY DRILL HAND (NO S/S DOCUMENT) |
| MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
| WW-P-471 Revision C:1981 | Pipe Fittings: Bushings, Locknuts, and Plugs; Iron, Steel, and Aluminum; (Threaded); 125-150 Pounds (S/S by A-A-59616) |
| GG P 001278 : A | PLASTIC-FILLING INSTRUMENTS AND CONTOURING INSTRUMENT, DENTAL |
| ASTM A 682/A682M : 2005 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009) |
| NNN T 780 : B NOTICE 1 | TUBE CENTRIFUGE GLASS |
| DDD-B-421 Revision F:1967 | Blanket, Bed, (Other Than All Wool) (No S/S Document) |
| H-B-00481 Revision D:1970 | BRUSHES, SANITARY (NO S/S DOCUMENT) |
| L-H-520 Revision G:1983 | Hose and Hose Assemblies, Non-Metallic (Rubber, Plastic) (S/S by A-A-59270) |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER (NO S/S DOCUMENT) |
| ZZ R 710 : A | RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION (S/S BY ASTM-D4181) |
| RR-S-615 Revision C:1969 | Sponge, Metal (No S/S Document) |
| GG I 492 : A | INDICATOR, SIGHT LIQUID |
| AA-S-81 Revision B:1962 | SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION (NO S/S DOCUMENT) |
| GG-P-00636 Revision B:1973 | PRESS, DENTURE, FLASK (S/S BY A-A-53268) |
| NNN-P-1482 Revision A:1970 | PIPET, SEROLOGICAL, SAHLI HEMOGLOBIN (NO S/S DOCUMENT) |
| DDD-M-001349 Base Document:1967 | MAT, FLOOR, AND MATTING, PILE SURFACE, ENTRANCE WAY TYPE (NO S/S DOCUMENT) |
| GGG-G-00695 Revision A:1965 | GROOVER, SHEET METAL, HAND (NO S/S DOCUMENT) |
| GGG-S-131 Revision E:1965 | SCRIBER, MACHINISTS (S/S BY A-A-3026) |
| UU-P-272 Revision C:1972 | PAPER, WRAPPING, FREEZER (POLYETHYLENE COATED) (S/S BY A-A-1245) |
| GGG-R-200 Revision B:0196 | REMOVAL TOOL, OIL FILTER (S/S BY A-A-2978) |
| MIL-A-13550 Revision E:1974 | Antifogging Kit, M1 |
| GGG-C-414 Revision A:1965 | CLAMP, WIRE SPLICING |
| GG-S-605 Base Document:1960 | SPECULUM SET, EAR (NO S/S DOCUMENT) |
| KK-P-91 Revision B:1963 | PALMS, SEWING (SAILMAKERS AND SADDLERS) (NO S/S DOCUMENT) |
| QQ-A-367 Revision H:1973 | Aluminum Alloy Forgings (S/S by SAE-AMS-QQ-A-367) |
| RR-S-001301 Base Document:1967 | Safety Equipment, Climbing (No S/S Document) |
| PPP-B-140 Revision C:1993 | Batteries, Storage, Industrial, Automotive, Aircraft and Navy Portable: Packaging of (No S/S Document) |
| O-P-566 Revision B:1984 | POTASSIUM HYDROXIDE, TECHNICAL (S/S BY ASTM-E1456) |
| PPP-F-00320 Revision E:1991 | FIBERBOARD: CORRUGATED AND SOLID, SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES (S/S BY ASTM-D4727) |
| PPP-G-460 Revision C:1976 | GLASS CONTAINERS, FILLED AND CLOSED, PACKAGING AND PACKING OF (NO S/S DOCUMENT) |
| SS S 535 : B | SODIUM BORATE, DECAHYDRATE, TECHNICAL (BORAX) |
| JJ-B-00178 Revision C:1957 | BELTS, ROUND, DENTAL ENGINE (S/S BY A-A-51644) |
| GG-D-00441 Revision C:1969 | DISPENSER, STRIP, DENTAL (S/S BY A-A-54128) |
| TT-I-528 Revision C:1971 | INK, DRAWING, WATERPROOF, BLACK (S/S BY A-A-2767) |
| UU-S-48 Revision F:1973 | SACKS, SHIPPING, PAPER |
| DDD-C-441 Revision C:1972 | Cloth, Polishing (S/Sby A-A-3157) |
| KKK-S-2777 Base Document:1985 | SNOWPLOWS, TRUCK MOUNTED, DISPLACEMENT TYPE, 36,000 GVWR, 4 BY 4 (NO S/S DOCUMENT) |
| O-A-549 Revision A:1973 | Anti-Fogging Compound (No S/S Document) |
| ASTM E 454 : 2012 : R2016 | Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) |
| AA-S-696 Base Document:1976 | STOOL, REVOLVING, SURGEON\'S (S/S BY A-A-51988) |
| GGG-T-70 Revision C Interim Revision:1968 | Tap, Thread Cutting, (Standard, American National Form and Metric Spark Plug Thread, High-Speed Steel, Ground Thread, Hand) (S/S BY ANSI-B94.9) |
| A-A-2763 Base Document:1992 | Typing, Element (Disk Type) (No S/S Document) |
| MIL-D-218 Revision B:1981 | Dibutyl Phthalate, Technical (Metric) (No S/S Document) |
| QQ-S-766 Revision D:1988 | Steel, Stainlessand Heat Resisting, Alloys, Plate, Sheetand Strip (S/S By ASTM-A240, ASTM-A666,and ASTM-A693) |
| MMM-A-1754 Base Document:1973 | ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED |
| C-F-202 Revision F:1985 | FELT SHEET (HAIR) AND FELT ROLL (HAIR) (S/S BY MIL-DTL-32065) |
| P-S-1792 Base Document:1973 | SOAP, LAUNDRY (NEUTRAL AND BUILT) (NO S/S DOCUMENT) |
| PPP-P-1135 Revision B:1984 | PACKAGING OF DUCK FABRICS (COTTON; SYNTHETIC FIBER; COTTON-SYNTHETIC FIBER BLENDS) (S/S BY FED-STD-804) |
| L-W-001653 Base Document:1971 | Waste Receptacle, Mobile, Plastic (S/S by A-A-295) |
| AA-D-001918 Base Document:1975 | DESKS, FLAT TOP, STEEL, CONTEMPORARY STYLE (S/S BY A-A-2095) |
| XX-C-2812 Base Document:1993 | COMPRESSOR, AIR, DIESEL-ENGINE-DRIVEN, PORTABLE, WHEEL-MOUNTED (S/S BY A-A-59611) |
| W-A-450 Revision C:1990 | COMPONENTS FOR INTERIOR ALARM SYSTEMS (NO S/S DOCUMENT) |
| O-S-571 Revision G:1991 | SODIUM CARBONATE, ANHYDROUS, TECHNICAL (S/S BY A-A-59563) |
| ASTM D 1527 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| GG-S-621 Revision C:1977 | SPLINT, WOOD (S/S BY A-A-51553) |
| GGG-T-00570 Revision A:1965 | TorchKit, Soldering (Propane Gas) (S/S by A-A-51128 ) |
| GGG-T-330 Revision B:1967 | THREADING SET, SCREW (NO S/S DOCUMENT) |
| DDD-C-301 Revision A:1976 | CHEESECLOTH; NIPING PURPOSES (REMNANTS AND SECONDS) (FOR FUTURE PROCUREMENT USE A-A-1224) |
| TT-P-1536 Revision A:1975 | PLUMBING FIXTURE SETTING COMPOUND (S/S BY A-A-3110) |
| DDD-P-0053 Revision C:1963 | PAD, ABDOMINAL (DRAINAGE DRESSING, COMBINATION) (NO S/S DOCUMENT) |
| L-P-506 Revision A:1963 | PLASTIC SHEET & FILM, POLYSTYRENE BIAXIALLY ORIENTED (REPLACED BY ASTM D1463-81 |
| O-S-809 Revision E:1990 | SULFURIC ACID, TECHNICAL (S/S BY A-A-55828) |
| A-A-2767 Base Document:1992 | Ink, Drawing, Waterproof, Black (No S/S Document) |
| GGG-B-485 Revision B:1978 | Block, Tackle, Wire Rope, with Swivel Hook, (for Crane Use) (No S/S Document) |
| L-P-380 Revision C:1973 | Plastic Molding Material Methacrylate |
| C-F-158 Revision C:1969 | Feather, Landfowl, (Whole) and (Crushed) (No S/S Document) |
| L-P-528 Revision B:1976 | Plastic Sheet, Pressure Sensitive Adhesive Coated, Paper-Backed (S/S by A-A-2681) |
| ASTM A 390 : 2006 : R2011 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| ASTM F 2648/F2648M : 2017 : REDLINE | Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| U-E-650 Revision A:1976 | ERGOTAMINE TARTRATE AND CAFFEINE TABLETS, N.F. (NO S/S DOCUMENT) |
| PPP-B-2920 Base Document:1997 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF (NO S/S DOCUMENT) |
| UU-P-663 Revision B:1972 | PAPERBOARD, DRAWING (NO S/S DOCUMENT) |
| ASTM F 289 : 1996 : R2009 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| GGG-H-86 Revision C:1963 | HAMMER, HAND, (FORGED STEEL HEAD) (S/S BY A-A-3045 AND A-A-3099) |
| NNN F 800 : A NOTICE 1 | FUNNEL SEPARATORY |
| GGG-B-50 Revision A:1966 | Bag, Lineman\'s Tool, Round (No S/S Document) |
| TT-I-1795 Revision A:1973 | Ink, Marking, Stencil, Opaque (Porous and Non-Porous Surfaces) (S/S BY A-A-208) |
| P-T-1544 Revision A:1975 | TEST KIT (DETERGENT CONCENTRATION AND WATER HARDNESS) (NO S/S DOCUMENT) |
| L E 00530 : B | ENVELOPE, TRANSPARENT |
| DD B 00510 : A | BOTTLE, ASPIRATOR, GLASS |
| GG-C-106 Revision A:1961 | CALIPER, EYE, CASTROVIEJO (S/S BY A-A-53540) |
| NNN-F-001652 Base Document:1970 | FUNNEL, COMMON LABORATORY, POLYPROPYLENE, RIBBED (S/S BY A-A-51212) |
| TT S 001543 : A | SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| UU B 00342 : C | BINDER, LOOSE LEAF, RING, ENGINEER S FIELD BOOK |
| DDD-L-20 Revision F:1990 | Label: for Clothing, Equipage, and Tentage, (General Use) (S/Sby MIL-DTL-32075) |
| O-I-00490 Revision B:1974 | INHIBITOR, CORROSION, LIQUID COOLING SYSTEM (USE MIL-A-53009) |
| GG-H-590 Base Document:1959 | Holder, Radiographic Film Cassette (S/S by A-A-53324) |
| KK-C-450 Revision F:1986 | CLOTHING, LEATHER, (APRONS, SLEEVES, AND JACKETS) (S/S BY A-A-55098) |
| MMM-A-105 Base Document:1967 | Adhesive and Sealing Compounds Cellulose Nitrate Base, Solvent Type (S/S by A-A-529) |
| GGG-B-001351 Base Document:1968 | BROACH, JEWELER S AND PIVOT (NO S/S DOCUMENT) |
| O-F-1044 Revision B:1975 | Fuel, Engine Primer: Cold Starting, in Pressurized and Nonpressurized Containers |
| PPP-B-665 Revision D:1972 | Boxes, Paperboard, Metal Edged and Components (S/S by A-A-669and A-A-2807) |
| GG-H-109 Revision B:1975 | HANGER, X-RAY FILM (S/S BY A-A-50910) |
| NNN-S-450 Revision B:1976 | SLIDE, MICROSCOPE (NO S/S DOCUMENT) |
| DDD-P-66 Revision B:1973 | PAD, SANITARY (NO S/S DOCUMENT) |
| GG-C-560 Revision D:1986 | COMPASSES, MAGNETIC: SURVEYOR\'S AND TRANSIT, POCKET; WITH OPTIONAL BALL JOINT AND JACOB\'S STAFF (S/S BY A-A-52024) |
| GG-D-600 Revision D:1982 | DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS (S/S BY A-A-52034) |
| SS J 570 : B NOTICE 1 | JOINT COMPOUNDS AND TAPE, WALLBOARD (FOR GYPSUM WALLBOARD CONSTRUCTION) |
| NNN D 001290 : D | DESICCATOR LABORATORY AND DESICCATOR PLATES |
| DDD R 00271 : B NOTICE 1 | RIBBON, COMPUTING AND RECORDING MACHINES |
| TT-I-535 Revision D:1972 | INK, DUPLICATING MACHINE STENCIL, PASTE, BLACK (S/S BY A-A-206) |
| PPP-P-420 Revision B:1972 | PLUG AND FLANGES (FOR DRUM CLOSURES) (NO S/S DOCUMENT) |
| GG-E-916 Revision F:1987 | EXPLORERS, DENTAL; EXPLORER-PROBE, DENTAL (NO S/S DOCUMENT) |
| UU-C-00620 Revision C:1967 | COVER, HEADREST, PAPER (DENTAL CHAIR) (NO S/S DOCUMENT) |
| MMM-A-189 Revision C:1985 | ADHESIVE, SYNTHETIC-RUBBER, THERMOPLASTIC, GENERAL-PURPOSE |
| GG-T-250 Revision A:1974 | TESTER, ANTIFREEZE SOLUTIONS (NO S/S DOCUMENT) |
| AA-S-00300 Revision A Interim Revision:1967 | SHELF, FILING (NO S/S DOCUMENT) |
| PPP-P-1899 Base Document:1974 | PREPARATION FOR DELIVERY REQUIREMENTS FOR TABLES, STEEL, GENERAL OFFICE (NO S/S DOCUMENT) |
| HH-P-31 Revision F:1987 | Packing Material, Nonasbestos, Fibrous Glass Metallic and Plain Cloth and Tape |
| UU-S-625 Revision A:1965 | STENCILBOARD (S/S BY A-A-1733) |
| AA-O-00240-4 Revision C Interim Revision:1970 | OFFICE FURNITURE, CREDENZA, OFFICE, STEEL (NO S/S DOCUMENT) |
| GGG-D-780 Revision A:1965 | DRIVER, PROJECTILE UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) (NO S/S DOCUMENT) |
| P-P-101 Revision E:1973 | PAPER, ABRASIVE, SILICON CARBIDE, WATERPROOF (S/S BY A-A-1047) |
| TT-I-1788 Base Document:1972 | INK, DUPLICATING, LITHOGRAPHIC PROCESS KIT (NO S/S DOCUMENT) |
| GG-T-258 Revision A:1967 | Tester, Battery Electrolyte Solution (S/S by A-A-2582) |
| EE-C-1827 Revision A:1984 | DINING PACKETS (DIETETIC OR NONDIETETIC, TRAY SERVICE) (NO S/S DOCUMENT) |
| HH-I-515 Revision E:1992 | INSULATION, THERMAL (LOOSE-FILL FOR PNEUMATIC OR POURED APPLICATION): CELLULOSIC OR WOOD FIBER (S/S BY ASTM-C739) |
| GG-B-0089 Revision C:1967 | BAND, ABRASIVE, (SILICON CARBIDE) (S/S BY A-A-53919) |
| TT-A-516 Revision D:1962 | Amyl Alcohol: Secondary ( Use ASTM-D391) |
| W-S-865 Revision C:1959 | Switch, Box, (Enclosed), Surface-Mounted (S/S by UL98) |
| GGG-E-926 Revision C Interim Revision:1968 | Extractor, Cotter-Pin (S/S by A-A-385) |
| NNN-T-001529 Revision B:1970 | TEST PAPER, HYDROGEN ION (S/S BY A-A-53637) |
| P-C-535 Revision B:1978 | CLEANING COMPOUND, PLATERS ELECTROCLEANING, FOR STEEL (S/S BY SAE-AMS1547) |
| MIL-H-0010120 Revision K:1983 | Headharness, C8R1 (No S/S Document) |
| FF-S-111 Revision D:1974 | Screw, Wood |
| GGG-S-775 Revision A:1960 | STUD REMOVER AND SETTER (NO S/S DOCUMENT) |
| FF-F-133 Revision A:1967 | FASTENERS, WOOD JOINT, CORRUGATED (SAW EDGE) (NO S/S DOCUMENT) |
| MIL-C-51232 Revision C:1977 | Cloth, Marquisette, Polyester (No S/S Document) |
| GGG F 00360 : D | FINGER, MECHANICAL, AND RETRIEVER TOOL, MAGNETIC |
| MIL-C-51387 Revision A:1979 | Circuit Card Assembly (No S/S Document) |
| NNN-B-001194 Base Document:1966 | BOTTLES: DROPPER, AND DROPPING TK (S/S BY A-A-51374) |
| PPP-P-1877 Revision A:1977 | PACKAGING AND PACKING OF WOOD OFFICE FURNITURE (NO S/S DOCUMENT) |
| ASTM F 810 : 2012 | Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
| O-N-335 Base Document:1962 | NICKEL SALT, ELECTROPLATING |
| GGG H 580 : A | HOOK, MATERIAL HANDLING, HAND |
| AASHTO M 32M/M 32 : 2009 | SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT |
| ZZ-G-100 Revision A:1961 | GLOVES, RUBBER, AUTOPSY |
| GGG-H-00110 Base Document:0196 | Handling Tool, Sheet Material (Vacuum Type) (S/S by A-A-3039) |
| QQ-T-425 Revision B:1976 | Tinplate (Electrolytic) (S/Sby ASTM-A623, ASTM-A623M, ASTM-A624, ASTM-A624M, ASTM-A626, ASTM-A626Mand ASTM-A630) |
| CCC C 531 : E | CLOTH, TRACING |
| GG-P-133 Revision B:1966 | PEN, RULING, DRAFTSMAN, RAILROAD, SWIVEL BLADE, 5-INCH (NO S/S DOCUMENT) |
| O-E-661 Revision D:1984 | ERADICATOR, INK (NO S/S DOCUMENT) |
| NNN-F-240 Revision D:1976 | FLASK, LABORATORY (S/S BY A-A-51298, A-A-51103, A-A-51109) |
| DD-J-112 Revision B:1976 | JAR, BIOLOGICAL STAINING, COPLIN (NO S/S DOCUMENT) |
| W-C-440 Revision B:1970 | CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR (S/S BY A-A-59466) |
| UU B 342 : A | BINDER, LOOSE LEAF, RING, ENGINEER S FIELD BOOK |
| DDD E 00940 : A | EYELET REINFORCEMENT, GUMMED, CLOTH |
| MMM-A-182 Revision A:1967 | Adhesive, Rubber |
| GG-B-101 Revision G:1986 | BANDAGE, CAST, PLASTER OF PARIS IMPREGNATED (HARD COATED) (NO S/S DOCUMENT) |
| PPP-P-2008 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR PARTITIONS, OFFICE, STEEL (NO S/S DOCUMENT) |
| LLL-F-00550 Base Document:1964 | Fork and Spoon, Picnic (Wood) (No S/S Document) |
| TT-S-00227 Revision E:1969 | SEALING COMPOUND, ELASTOMERIC TYPE, MULTI-COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) (S/S BY A-A-1556) |
| ASTM F 876 : 2017 : REDLINE | SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
| UU B 39 : E | BAG, PAPER, MERCHANDISE |
| GG H 925 : 0 | HYDROMETERS, GRADUATED SCALE (FOR GENERAL LABORATORY USE) |
| UU B 43 : D NOTICE 1 | BAG, PAPER, WASTE-RECEPTACLE |
| GG-C-1433 Revision B:1976 | Chisels (Cutting Instruments), Dental (No S/S Document) |
| DDD-B-61 Revision E:1972 | Bandage, Gauze, (Roller and Compressed) (No S/S Document) |
| L-C-110 Revision J:1958 | CELLOPHANE (COATED AND NONCOATED REGENERATED CELLULOSE FILM) (S/S BY A-A-1989) |
| DDD R 311 : F (1) | RIBBONS, TYPEWRITER |
| MIL-F-0051095 Revision F:1983 | Filter Material, Gas-Aerosol, C18R1 (No S/S Document) |
| UU-T-81 Revision J:1975 | Tags, Shipping and Stock (S/S by A-A-1266, A-A-1916, A-A-900) |
| FF-T-311 Revision E:1974 | THUMBTACK, (REPLACED BY A-A-426 |
| SS-C-266 Revision F:1973 | CHALK, MARKING, WHITE AND COLORED |
| GG-C-611 Revision C:1975 | COUNTING APPARATUS, BACTERIAL COLONY AND PLATE, COUNTING, BACTERIOLOGICAL (S/S BY A-A-63663) |
| DDD-C-001559 Base Document:1969 | CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING (NO S/S DOCUMENT) |
| GGG-O-591 Revision F:1977 | Oiler, Hand (S/Sby A-A-50470, A-A-50471, A-A-50473, A-A-50474,and A-A-50477) |
| NNN C 440 : NOTICE 1 | CLAMP UTILITY LABORATORY AND HOLDER BURET CLAMP |
| HH-I-538 Revision B:1964 | INSULATION, ELECTRICAL, PASTED-MICA (NO S/S DOCUMENT) |
| DD S 750 : A | STOPPER, LABORATORY APPARATUS, TAPER-GROUND |
| GGG-A-145 Revision A:1965 | ADJUSTING TOOL, BRAKE SHOE (SPOON TYPE) |
| MIL-S-51547 Base Document:1989 | SMOKE POT, HC, M1, COMPONENTS FOR (NO S/S DOCUMENT) |
| AA-P-560 Revision A:1966 | POINTER, LECTURE (S/S BY A-A-2983) |
| GG P 00146 : D | PEN SET, DESK |
| GG-B-001294 Base Document:1967 | BURNISHER, DENTAL (S/S BY A-A-54458) |
| GGG-T-661 Revision B:1966 | Trammels and Trammel Points (S/S by A-A-2537) |
| MIL-F-51184 Revision A:1973 | Fasteners, Snap (No S/S Document) |
| GGG-B-001222 Base Document:1967 | BIT, SCREWDRIVER (AND ADAPTER, SCREWDRIVER BIT) (NO S/S DOCUMENT) |
| GG-S-1343 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) (NO S/S DOCUMENT) |
| UU-P-221 Revision B:1972 | Paper, Direct Positive Sensitized (Diazotype) (No S/S Document) |
| QQ-C-571 Revision B:1974 | Copper, Phosphor ( Alloying Additive)(S/S by ASTM-B644) |
| GGG-T-0040 Revision A Interim Revision:1965 | TAMPERS, HAND (NO S/S DOCUMENT) |
| GGG-W-653 Revision B:1964 | WRENCH, RATCHET, REVERSIBLE (NO S/S DOCUMENT) |
| QQ-B-750 Base Document:1961 | Bronze, Phosphor; Bar, Plate, Rod, Sheet, Strip, Flat Wire, and Structural and Special Shaped Sections (S/S by ASTM-B139) |
| O-I-501 Revision B:1964 | INHIBITORS, PICKLING (FOR USE WITH SULPHURIC ACID) (NO S/S DOCUMENT) |
| GGG-C-135 Revision A:1966 | CALKING TOOL, HAND (NO S/S DOCUMENT) |
| GGG-B-001013 Base Document:1967 | BIT, SCREWDRIVER (TORQ-SET) (NO S/S DOCUMENT) |
| GG-T-675 Base Document:1958 | TRIMMER, ANIMAL TOENAIL |
| PPP-B-621 Revision D:1981 | Boxes, Wood, Nailed and Lock-Corner (S/S by ASTM-D6880) |
| LLL-C-251 Revision A:1969 | Charcoal, Wood (No S/S Document) |
| GGG-J-51 Revision E:1967 | JACK, MECHANICAL, HAND OPERATED (SCREW, SCISSORS, REEL, PLANER, AND RACK BAR (S/S BY A-A-2970 AND A-A-2979) |
| O-S-00650 Base Document:1965 | Sodium Sulfite, Anhydrous, Technical, and Sodium Bisulfite, Anhydrous, Technical, for Water Treatment (No S/S Document) |
| GG-G-590 Base Document:1961 | GONIOMETER, ORTHOPEDIC (NO S/S DOCUMENT) |
| EE-S-321 Revision F:1987 | SHORTENING COMPOUNDS AND LARD (REFER TO A-A-20100A |
| GGG-D-698 Revision A:1963 | DRILL, RATCHET (REVERSIBLE) (NO S/S DOCUMENT) |
| JJ-H-571 Revision B:1967 | Hose, Fire, Linen , Unlined (With or Without Couplings) (S/S by A-A-2245) |
| O S 00809 : D | SULFURIC ACID, TECHNICAL |
| RR-C-271 Revision G:2016 | Chains and Attachments, Carbon and Alloy Steel |
| VV-S-190 Base Document:1961 | Sealing Compound, Dipcoating (No S/S Document) |
| PPP-C-1752 Revision D:1989 | CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM (S/S BY A-A-59135 AND A-A-59136) |
| QQ-P-00428 Revision C:1967 | PLATINUM FOIL (DENTAL) (S/S BY A-A-53475) |
| O-E-760 Revision D:1987 | ETHYL ALCOHOL (ETHANOL); DENATURED ALCOHOL; PROPRIETARY SOLVENTS AND SPECIAL INDUSTRIAL SOLVENTS (S/S BY A-A-59282, A-A-51693, A-A-53880) |
| UU-C-1387 Revision B:1976 | CAPS, FOOD HANDLERS, PAPER, WHITE, ADJUSTABLE (S/S BY A-A-719) |
| O-A-491 Revision E:1967 | Ammonium Chloride, Technical (A/A by A-A-52092) |
| QQ-Z-363 Revision B:1972 | ZINC-BASE ALLOY; DIE CASTINGS (S/S BY ASTM-B86) |
| MIL I 2819 : E | INSULATION BLOCK THERMAL |
| GGG-D-694 Revision A:1960 | Drill, Masonry, Rotary Driven |
| JJJ-B-87 Base Document:1959 | BALL, GAUZE (S/S BY A-A-54749) |
| MIL-P-51432 Revision A:1988 | PLASTIC SHEET, POLYETHYLENE COPOLYMER (NO S/S DOCUMENT) |
| P-C-436 Revision E:1986 | Cleaning Compound, Alkali, Boiling Vat (Soak) or Hydrosteam (S/S by A-A-59146) |
| HHH-C-575 Revision E:1987 | COFFEE, INSTANT (S/S BY A-A-20184) |
| DD-T-710 Base Document:1957 | TUBES, CONNECTING, LABORATORY GLASSWARE AND CONNECTOR, ELASTIC TUBING, BRANCHED (NO S/S DOCUMENT) |
| TT S 00230 : C | SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| GGG-P-00788 Base Document:1964 | PULLER, MECHANICAL, WATCH AND CLOCK HAND (NO S/S DOCUMENT) |
| GGG-V-440 Revision A:1967 | VISE, HANDSAW, FILING, BAND SAW FILING, AND CIRCULAR SAW FILING (NO S/S DOCUMENT) |
| GGG A 00147 : 0 | ADJUSTING TOOL, VALVE TAPPET |
| GGG-B-00101 Revision E:1995 | BARS: CHISEL, PINCH, PRY, WRECKING, DIGGING, TAMPING, DIGGING AND TAMPING ; AND CROWBARS (S/S BY A-A-2562, A-A-2563, A-A-2564, A-A-2565, A-A-2566, A-A-2567, A-A-2568 AND A-A-2879) |
| HH-G-76 Revision C:1970 | Gaskets, Asbestos Metalic Cloth (S/S by ASTM-F709) |
| CCC-P-91 Revision C:1973 | Padding, Rubberized, Curled Hair |
| GG-R-60 Revision C:1965 | Razors, Safety; and Blades, Razor (S/S BY A-A-2744) |
| AA-B-450 Revision B:1974 | Blackboard, Portable |
| GG-P-00181 Revision D:1993 | PENHOLDER, WRITING (NO S/S DOCUMENT) |
| GG-D-1958 Base Document:1975 | Dispenser Gummed Tape (Electrically Operated) |
| KK-C-300 Revision C:1969 | CHAMOIS, LEATHER, SHEEPSKIN, OIL TANNED |
| O-H-765 Revision E:1990 | HYDROCHLORIC ACID, TECHNICAL (S/S BY ASTM-E-1146) |
| AA-S-271 Revision D:1967 | Shelving, Storage and Display, Steel, Interchangeable, Nut and Bolt Type (No S/S Document) |
| FF-T-1813 Base Document:1973 | TACK (NO S/S DOCUMENT) |
| GG-S-176 Revision A:1960 | SCREEN, X-RAY INTENSIFYING, ROENTGENOGRAPHIC, FOR DIAGNOSTIC RADIOGRAPHY(NO S/S DOCUMENT) |
| L-P-1221 Revision A:1971 | PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE-RUBBER, DRAIN) (S/S BY ASTM-D2852) |
| DDD-E-940 Base Document:1963 | Eyelet Reinforcement, Gummed, Cloth (S/S by A-A-188) |
| GGG-R-0080 Base Document:1965 | Rake (Asphalt, Road) (No S/S Document) |
| TT B 848 : B | BUTYL ALCOHOL, SECONDARY (FOR USE IN ORGANIC COATINGS) |
| MIL S 28786 : B | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| KK-G-486 Revision E:1984 | Gloves, Welder\'s, Leather Gauntlet (S/S by A-A-50022) |
| QQ-C-465 Revision A:1974 | Copper-Aluminum Alloys (Aluminum Bronze) (Copper Alloy Numbers 606, 614, 630, and 642) ; Rod, Flat Products with Finished Edges (Flat Wire, Strip,and Bar), Shapes, and Forgings(S/Sby ASTM-B124, ASTM-B150, ASTM-B169, AND ASTM-B283) |
| AA-S-130 Revision B:1991 | SCREENS, BEDSIDE, ALUMINUM (NO S/S DOCUMENT) |
| HH-M-391 Revision E:1976 | Mittens, Cloth, Asbestos (Leather Reinforced) (No S/S Document) |
| P-C-451 Revision E:1975 | Coated Abrasive, Cloth, Aluminum Oxide or Silicon Carbide (S/S by A-A-1048and A-A-1200) |
| GG-R-1472 Revision B:1987 | Retainer, Matrix, Dental, (Tofflemire) (No S/S Document) |
| TT-I-526 Revision A:1964 | INK, DRAWING, BLACK AND COLORS: (FOR GLAZED PLASTIC SURFACES) (NO S/S DOCUMENT) |
| GGG-F-331 Revision B:1966 | FILE, HAND (SWISS PATTERN) (NO S/S DOCUMENT) |
| GG-C-0048 Revision A:1967 | CABINET, TOOTH ASSORTMENT, COMPARTMENTED (S/S BY A-A-53854) |
| MIL-A-87134 Base Document:1978 | ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS |
| GGG-C-746 Revision G:1979 | Cutlery, Galley and Kitchen (Cleaver, Forks, Knives, Spatulas, Steel and Server) (S/S by A-A-2733) |
| QQ-C-40 Base Document:1963 | CALKING, LEAD WOOL AND LEAD PIG |
| UU-B-340 Revision A:1973 | BINDER, LOOSE LEAF, FLEXIBLE PRONG (S/S BY A-A-2655) |
| FF-T-51 Revision D:1975 | Maptack |
| A-A-79 Revision C:1992 | DISPENSER, GUMMED TAPE (AUTOMATIC TYPE) (NO S/S DOCUMENT) |
| ZZ-R-1415 Revision A:1977 | RUBBER BAND |
| NNN-H-001497 Base Document:1970 | HOLDER, BLOOD COLLECTING TUBE (S/S BY A-A-53865) |
| GG-B-001275 Base Document:1967 | BURS, DENTAL, FINISHING (S/S BY A-A-53823) |
| GGG-S-285 Revision B:1964 | SHEARS, PRUNING, HAND, (TWO-HAND OPERATED, LOPPING) (S/S BY A-A-243) |
| GGG-S-284 Revision B:1964 | SHEARS; PRUNING, HAND, (ONE-HAND OPERATED) (S/S BY A-A-962) |
| ZZ-P-75 Revision B:1971 | PAD, TYPEWRITER, SPONGE RUBBER (S/S BY A-A-2704) |
| GGG-F-00420 Base Document:1963 | FISHING TOOL, PNEUMATIC TIRE VALVE (NO S/S DOCUMENT) |
| NNN-B-1505 Revision A:1976 | BOTTLES, SCREWCAP, GLASS (LABORATORY USE) (NO S/S DOCUMENT) |
| GG-B-60 Revision D:1972 | PEN, BALLPOINT (S/S BY A-A-2916) |
| QQ C 586 : C | COPPER NICKEL ZINC ALLOY, ROD, SHAPES, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR) |
| GGG-W-00647 Base Document:1966 | Wrench, Bung, and Wrench, Drain Plug (S/S by A-A-3086) |
| GG-H-582 Base Document:1959 | HOLDER, PATIENT\'S BED-TRAY CARD (S/S BY MIL-H-42077) |
| QQ-M-40 Revision B:1962 | MAGNESIUM ALLOY FORGINGS (S/S BY ASTM-B91 AND ASTM-B661) |
| ASTM A 684/A684M : 2017 : REDLINE | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| WW-T-696 Revision E:1984 | Traps, Steam (S/S by A-A-60001) |
| L-C-780 Revision A:1965 | CURTAIN, SHOWER AND WINDOW, PLASTIC (S/S BY A-A-2398) |
| PPP-C-1797 Revision A:1982 | Cushioning Material, Resilient, Low Density, Unicellular, Polypropylene Foam |
| AASHTO M 32M/M 32 : 2009 : R2013 | SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT |
| PPP-P-0015 Revision D:1970 | PACKAGING AND PACKING OF STORAGE CABINETS, WARDROBES AND CLOTHING LOCKERS, METAL (NO S/S DOCUMENT) |
| ASTM A 392 : 2011 : REV A : R2017 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| FFF-D-191 Revision D:1975 | Dentifrice |
| UU-P-134 Revision E:1974 | PAPER, WRAPPING, WET-WAXED (S/S BY A-A-319) |
| GGG-T-00563 Revision B:1967 | Tools, Blacksmiths\' (Chisels, Flatters, Fullers, Hardies, Bolt Heading Tools, Punches, and Swages) |
| DDD-C-628 Revision F:1981 | COVER, MATTRESS |
| L-T-790 Revision B:1976 | TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE) (S/S BY A-A-55697) |
| MIL-A-202 Revision C:1981 | Anthracene, Technical (Metric) (No S/S Document) |
| DD-M-00200 Revision B:1970 | MEDICINE GLASS (S/S BY A-A-51072) |
| GG-L-00410 Base Document:1964 | Line Guide, Lettering, Adjustable (No S/S Document) |
| DDD R 00310 : (1) | RIBBON, TIME STAMP |
| ZZ-G-401 Revision B:1970 | GLOVES, RUBBER (FOR) ELECTRICAL WORKERS (FOR USE IN CONNECTION WITH APPARATUS OR CIRCUITS NOT EXCEEDING 5,000 VOLTS TO GROUND) (S/S BY ASTM-D120) |
| GG-I-550 Revision B:1974 | INKING PAD, OFFICE TYPE NUMBERING MACHINE (NO S/S DOCUMENT) |
| GG-C-1320 Revision B:1985 | CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM) (NO S/S DOCUMENT) |
| ASTM C 875 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Conduit |
| H-B-401 Revision C:1964 | BRUSHES, MUCILAGE AND PASTE (S/S BY A-A-2661) |
| DD-B-599 Revision A:1961 | BOTTLE, STOPPER, VACCINE, ROUND AND STOPPER, BOTTLE, RUBBER |
| BBB-S-1269 Revision B:1973 | Sweat Pants (S/S by A-A-55290) |
| L-T-776 Revision A:1966 | Tray, Service (Laminated Fiber Glass, Polyester Resin) (S/S by A-A-2594) |
| GG-P-725 Revision B:1978 | Psychrometer (S/S by A-A-59198) |
| GG-G-650 Base Document:1959 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE (S/S BY A-A-53239) |
| K-B-1069 Revision A:1972 | BASKET, FRAME MOUNTED (S/S BY A-A-1063) |
| GGG-H-001347 Base Document:1969 | HOT LINE STICKS (NO S/S DOCUMENT) |
| JJ-G-451 Revision H:1984 | Glove, Men\'s and Women\'s, Cloth, Leather Palm (S/Sby A-A-50016and A-A-50021) |
| DDD-B-60 Base Document:1959 | BANDAGE, GAUZE, TUBULAR (NO S/S DOCUMENT) |
| GG-B-140 Revision D:1986 | BATH, WATER, DENTAL IMPRESSION COMPOUND THERMOSTATICALLY CONTROLLED (S/S BY A-A-54345) |
| UU-B-40 Revision C:1973 | BAG, PAPER, SHOPPING (S/S BY A-A-302) |
| KKK-L-370 Revision D:1988 | Lining, Friction, (Clutch and Brake, Metallic, Metal-Ceramic and Semi-Metallic) |
| LLL-L-51 Revision D:1985 | Ladders, Portable, Wood: Extension and Straight (S/Sby UL112) |
| GG-P-001428 Revision A:1975 | Preventive Dentistry Kit, Patient (S/S BY A-A-50871) |
| UU P 675 : B INT AMD (7) | POCKET PLANNING SET |
| A-A-59569 Revision C:2009 | Braid, Wire (Copper, Tin-Coated, Silver-Coated, or Nickel Coated, Tubular or Flat) |
| GG-C-1282 Revision C:1985 | CURETTES, ALVEOLAR (MOLT AND MILLER) (S/S BY A-A-53917) |
| NNN B 001522 : 0 | BOTTLE, STOPPER (NARROW AND WIDE MOUTH) |
| O-S-377 Revision B:1966 | SODIUM PYROPHOSPHATE, ANHYDROUS, TECHNICAL (TETRASODIUM-PYROPHOSPHATE) (S/S BY DOD-S-51517) |
| ZZ-T-351 Revision C:1976 | TIP, CANE AND CRUTCH, RUBBER (S/S BY A-A-30081) |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER, AND RELATED MATERIALS: PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT) |
| GG-S-590 Revision B:1976 | SPATULA, DENTAL, CEMENT (S/S BY A-A-53885) |
| ASTM F 1183 : 1996 : R2017 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| GG-C-00590 Revision B:1970 | Copyholder, Typist\'s (No S/S Document) |
| L-P-511 Base Document:1964 | Plastic Sheet, Laminated, Thermosetting, Cotton Fabric Base, Phenolic-Resin, Post-Forming |
| GG-S-321 Revision D:1972 | SHIELD, ERASING, DRAFTSMEN\'S (S/S BY A-A-2878) |
| NNN-B-788 Revision A:0196 | BULB, DROPPING, PIPET (S/S BY A-A-53904) |
| DDD-P-50 Base Document:1959 | PAD, COTTON, DRESSING, EYE PAD (S/S BY A-A-54757) |
| GGG-S-665 Revision C:1963 | STRIPPER, CABLE, HAND, AND STRIPPER, WIRE, HAND (NO S/S DOCUMENT) |
| GGG-D-651 Revision D:1964 | DRILL, BREAST (NO S/S DOCUMENT) |
| GG-H-216 Revision C:1976 | HEMACYTOMETER SET (NO S/S DOCUMENT) |
| PPP P 001946 : NOTICE 1 | PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE |
| ASTM F 2807 : 2013 : R2018 | Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications (Withdrawn 2024) |
| GGG-C-00137 Revision B Interim Revision:1968 | CAPS, VISE JAW (S/S BY A-A-2938) |
| QQ-W-470 Revision B:1965 | Wire, Steel, Carbon, Spring, Music (See Notice of Cancellation for Replacement Information) |
| GGG-H-506 Revision D:1962 | HOE, MATTOCK, AND PICK (NO S/S DOCUMENT) |
| KKK-T-728 Revision A:1973 | Truck, Hand, Two-Wheeled (Light Duty) 300 Pound Capacity |
| O-T-620 Revision C:1967 | 1,1,1-Trichloroethane, Technical, Inhibited (Methyl Chloroform) (S/S by ASTM-D4126) |
| ASTM F 2806 : 2010 : R2015 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| GG-S-1344 Revision A:0197 | STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT AND MOISTURE LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE) (NO S/S DOCUMENT) |
| DD-D-431 Revision D:1977 | DISH, BIOLOGICAL STAINING, WITH TRAY (S/S BY A-A-53817) |
| GG-E-651 Revision C:1975 | Eraser, Blackboard |
| BB-F-1421 Revision B:1982 | Fluorocarbon Refrigerants (S/S by A-A-58060) |
| GGG-S-1408 Revision A:1973 | SCREWDRIVER, RATCHET, RIGHT ANGLE OFFSET, RIGHT AND LEFT HAND TURNING (NO S/S DOCUMENT) |
| GG-S-125 Base Document:1961 | SAW, PLASTER-CAST, ENGEL (NO S/S DOCUMENT) |
| ASTM A 617/A617M : 1996 | SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT |
| GGG-M-125-10 Revision A:1982 | RESPIRATOR ASSEMBLY, HELMET WITH POWERED AIR PURIFYING UNIT (NO S/S DOCUMENT) |
| GG-F-001189 Base Document:1971 | FOUNTAIN PEN, TECHNICAL (S/S BY A-A-2919) |
| ASTM B 250/B250M : 2016 : REDLINE | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
| UU-P-680 Revision A:1964 | PORTFOLIO, DOUBLE-POCKET, PRESENTATION (S/S BY A-A-2660) |
| FF-T-791 Revision B:1967 | Turnbuckle (S/S BY ASTM-F1145) |
| GGG-D-777 Revision B:1966 | Driver, Projectile Unit, Powder Actuated (High Velocity) (Above Water Only) Pin, Drive, Powder Actuated, and Cartridge, Powder Actuated Tool (No S/S Document) |
| GGG-M-125-8 Revision B:1985 | Respirator Assembly: Half Mask, Air Purifying Particulate-Filter (for Dusts and Mists) (No S/S Document) |
| L-P-1183 Revision B:1977 | PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID (S/S BY ASTM-D1788) |
| HH-G-450 Revision D:1972 | Gloves, Cloth (Asbestos) (No S/S Document) |
| GGG-L-1763 Base Document:1974 | Labeling Machines (No S/S Document) |
| L-P-389 Revision A:1964 | PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING & EXTRUSION (REPLACED BY ASTM-D2116-81 |
| GGG-P-00477 Revision A:1967 | PLIER, SLIP JOINT (LINE CLAMP) (NO S/S DOCUMENT) |
| GGG-D-296 Revision B:1968 | DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE, AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS) (S/S BY A-A-411, A-A-412, A-A-413, A-A-414, AND A-A-415) |
| BB-A-106 Revision D:2010 | Acetylene, Technical, Dissolved |
| ASTM A 220/A220M : 1999 : R2009 | Standard Specification for Pearlitic Malleable Iron |
| DDD-G-148 Revision D:1964 | GAUZE, ABSORBENT, STERILE AND GAUZE, ABSORBENT, IODOFORM IMPREGNATED (PACKING STRIPS) (NO S/S DOCUMENT) |
| UU T 0085 : A NOTICE 1 | TAPE, CORRECTION |
| ASTM C 223 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Siding |
| TT B 838 : A | BUTYL ACETATE, NORMAL (FOR USE IN ORGANIC COATINGS) |
| TT-V-81 Revision G:1978 | VARNISH, MIXING, FOR ALUMINUM PAINT (NO S/S DOCUMENT) |
| KKK-T-1725 Base Document:1972 | TRUCK, HAND, BOX AND TUB TYPE (NO S/S DOCUMENT) |
| HHH-C-571 Revision F:1985 | COFFEE (S/S BY A-A-20213) |
| ASTM A 230/A230M : 2005 : R2011 : EDT 1 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 159 : 1983 | SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS |
| ASTM A 1085 : 2013 | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| J-C-96 Revision A:1971 | CABLE, TELEPHONE (W-108-B) (NO S/S DOCUMENT) |
| HH-T-1782 Base Document:1973 | TAPE, ASBESTOS (S/S BY ASTM-D315) |
| ASTM A 232/A232M : 2005 : R2011 : EDT 1 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ZZ-H-428 Revision D:1974 | Hose, Non-Metallic and Hose, Preformed: (For the Coolant Systems of Automotive and Other Liquid-Cooled Engines) (S/S by SAE-J20) |
| TT W 549 : D NOTICE 1 | WOOD PRESERVATIVE, AMMONIACAL COPPER ARSENITE MIXTURE |
| WW-N-351 Revision C:1976 | Nipple, Pipe, Threaded (S/S BY ASTM-A733-86 and ASTM-B687) |
| TT W 546 : D NOTICE 1 | WOOD PRESERVATIVE, ACID COPPER CHROMATE MIXTURE |
| DD-P-00100 Revision C:1970 | PAPERWEIGHT, GLASS (NO S/S DOCUMENT) |
| DDD-S-251 Revision D:1966 | SHADE, ROLLER, WINDOW; ROLLER, SLAT, CORD, AND ACCESSORIES (NO S/S DOCUMENT) |
| GG-S-001634 Base Document:1970 | SCALERS, DENTAL, SINGLE-ENDED (S/S BY A-A-54064) |
| ASTM A 116 : 2011 : R2016 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
| GGG-G-31 Revision A:1961 | GAGES, MARKING AND MORTISING |
| AASHTO M 322M/M 322 : 2010 : R2015 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| AASHTO M 225M/M 225 : 2009 : R2013 | SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT |
| ASTM E 786 : 1981 : R2011 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM B 163 : 2011 : EDT 1 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM F 289 : 1996 : R2014 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| ASTM A 905 : 2004 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 392 : 2011 : REV A | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM A 500/A500M : 2018 : REDLINE | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM B 774 : 2000 : R2005 | Standard Specification for Low Melting Point Alloys |
| SAE AMSHHG101A | Gasket, Metallic-Encased |
| ASTM A 834 : 1995 : R2006 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM C 1449/C1449M : 2005 : REV A : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM F 2881/F2881M : 2018 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM C 725 : 1990 : R2003 : EDT 1 | Standard Specification for Semidense Mineral Fiber Siding |
| ASTM F 810 : 2012 : R2018 | Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
| ASTM B 167 : 2011 : R2016 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube |
| ASTM C 508 : 2000 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| ASTM F 668 : 2017 : REDLINE | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| ASTM A 220/A220M : 1999 : R2014 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 955/A 955M : 2018-02 | SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 854/A854M : 2008 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM B 308M : 1988 | Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990) |
| ASTM F 1348/F1348M : 1991 : R2013 | Standard Specification for Pneumatic Rotary Descaling Machines |
| ASTM A 390:2006 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM F 3128 : 2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core |
| ASTM A 764 : 2007 : R2012 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 74 : 2017 : REDLINE | Standard Specification for Cast Iron Soil Pipe and Fittings |
| ASTM D 2729 : 2017 | Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| ASTM C 296 : 2000 : R2004 : EDT 1 | Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM A 505 : 2016 : REDLINE | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 853 : 2004 : R2017 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM F 771 : 1999 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| ASTM D 3309 : 1996 : REV A : R2002 | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
| ASTM F 891 : 2016 : REDLINE | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
| ASTM D 2235 : 2004 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM A 856/A856M : 2003 : R2009 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 834 : 1995 : R2011 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM C 1450/C1450M : 2004 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM B 19 : 2015 : REDLINE | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
| ASTM F 2435 : 2015 : REDLINE | Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe |
| ASTM D 98 : 2015 : REDLINE | Standard Specification for Calcium Chloride |
| ASTM D 4514 : 2012 : REDLINE | Standard Specification for Friction Tape |
| ASTM F 1673 : 2010 : R2016 | Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ASTM A 519 : 2006 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM E 785 : 1981 : R1996 : EDT 1 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM F 2806 : 2010 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM B 943 : 2016 : REDLINE | Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications |
| ASTM F 758 : 2014 : REDLINE | Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
| ASTM B 774 : 2000 | Standard Specification for Low Melting Point Alloys |
| ASTM D 2751 : 2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
| ASTM F 2986 : 2012 : R2017 | Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications |
| ASTM F 2829/F2829M : 2015 : REDLINE | Standard Specification for Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ASTM A 600 : 1992 : REV A : R2004 | Standard Specification for Tool Steel High Speed |
| ASTM A 390 : 2006 : R2016 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM F 1345 : 2010 : REV A : R2015 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 512 : 2017-11 | SPECIFICATION FOR COLD-DRAWN BUTTWELD CARBON STEEL MECHANICAL TUBING |
| ASTM C 508/C508M : 2000 : R2015 | Standard Specification for Asbestos-Cement Underdrain Pipe (Withdrawn 2021) |
| ASTM C 223 : 1998 | Standard Specification for Asbestos-Cement Siding |
| ASTM A 910/A910M : 2018 : REDLINE | Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete |
| ASTM A 554 : 2016 : REDLINE | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| ASTM C 746 : 1990 : R2014 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading (Withdrawn 2019) |
| ASTM A 491 : 2011 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM F 794 : 2003 : R2009 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
| ASTM A 568/A568M : 2019 : REV A : REDLINE | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ISO/IEC 16388:2007 | Information technology — Automatic identification and data capture techniques — Code 39 bar code symbology specification |
| ASTM D 5445 : 2015 : REDLINE | Standard Practice for Pictorial Markings for Handling of Goods |
| ANSI MH10.8.1 : 2005 | LINEAR BAR CODE AND TWO-DIMENSIONAL SYMBOLS USED IN SHIPPING, RECEIVING, AND TRANSPORT APPLICATIONS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.