I.S. EN 13135-2:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
Hardcopy , PDF
English
01-01-2004
12-03-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or protective
measures
7 Information for use
Annex A (informative) Selection of a suitable set of crane
standards for a given application
Annex B (normative) Cross list of vocabulary
Annex C (informative) National systems of standards for
hooks and brakes
Annex D (informative) Design of rail wheel flanges
Annex E (normative) Gripping devices based on adhesion
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Defines requirements for design and selection of non-electrotechnical equipment for all types of crane with the objectives of protecting personnel from hazards affecting their lives and health and of ensuring reliability of function.
| DevelopmentNote |
2004 Edition Re-issued in September 2010 & incorporates AMD 1 2010. (09/2010)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 13135-2 : 2004 + A1 2010 | Identical |
| EN 13135-2:2004+A1:2010 | Identical |
| NF EN 13135-2 : 2005 + A1 2010 | Identical |
| NS EN 13135-2 : 2004 + A1 2010 | Identical |
| DIN EN 13135-2:2011-07 | Identical |
| BS EN 13135-2 : 2004 | Identical |
| BS EN 13135-2 : 2004 | Equivalent |
| EN 13135-2:2004 | Equivalent |
| NEN EN 13135-2 : 2004 + A1 2010 | Identical |
| UNE-EN 13135-2:2005 | Identical |
| ISO 2408:2017 | Steel wire ropes — Requirements |
| ISO 4308-1:2003 | Title missing - Legacy paper document |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| ISO 5598:2008 | Fluid power systems and components — Vocabulary |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 12488-1:2012 | Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 1940-1:2003 | Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balance tolerances |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| ISO 6072:2011 | Rubber — Compatibility between hydraulic fluids and standard elastomeric materials |
| EN 13135-1:2003+A1:2010 | Cranes - Equipment - Part 1: Electrotechnical equipment |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| ISO 12100-2:2003 | Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles |
| ISO 4347:2015 | Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| ISO 2943:1998 | Hydraulic fluid power — Filter elements — Verification of material compatibility with fluids |
| ISO 4301-1:2016 | Cranes — Classification — Part 1: General |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.