I.S. EN 60079-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
Hardcopy , PDF
04-02-2020
29-10-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Level of protection (equipment
protection level, EPL)
5 Flameproof joints
6 Sealed joints
7 Operating rods
8 Supplementary requirements for shafts and bearings
9 Light-transmitting parts
10 Breathing and draining devices which form part
of a flameproof enclosure
11 Fasteners and openings
12 Materials
13 Entries for flameproof enclosures
14 Verification and tests
15 Type tests
16 Routine tests
17 Switchgear for Group I
18 Lampholders and Iamp caps
19 Non-metallic enclosures and non-metallic
parts of enclosures
20 Marking
21 Instructions
Annex A (normative) - Additional requirements for crimped
ribbon elements and multiple screen elements of breathing
and draining devices
Annex B (normative) - Additional requirements for elements,
with non-measurable paths of breathing and draining devices
Annex C (normative) - Additional requirements for flameproof entry
devices
Annex D (normative) - Empty flameproof enclosures as Ex components
Annex E (normative) - Cells and batteries used in flameproof 'd'
enclosures
Annex F (informative) - Mechanical properties for screws and nuts
Annex G (normative) - Additional requirements for flameproof
enclosures
with an internal source of release (containment system)
Annex H (normative) - Requirements for machines with flameproof 'd'
enclosures fed from converters
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZY (informative) - Significant changes between this European
Standard and EN 60079-1:2007
Annex ZZ (informative) - Coverage of Essential Requirements of
EC Directives
Defines requirements for the construction and testing of electrical equipment with the type of protection flameproof enclosure 'd', intended for use in explosive gas atmospheres.
| Committee |
TC 31
|
| DevelopmentNote |
Supersedes I.S. EN 50018. (06/2006) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
208
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 60079-1:2015 | Identical |
| IEC 60079-1:2014 | Identical |
| DIN EN 60079-1 : 2015-04 | Identical |
| NF EN 60079-1 : 2015 | Identical |
| EN 60079-1:2014 | Identical |
| BS EN 60079-1:2014 | Identical |
| NBN EN 60079-1 : 2014 | Identical |
| I.S. 3216:2010 | CODE OF PRACTICE - BULK STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) - (EDITION 2) |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 2738:1999 | Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity |
| IEC 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| ISO 4003:1977 | Permeable sintered metal materials — Determination of bubble test pore size |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| EN ISO 4022:2006 | Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987) |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| IEC 61951-2:2017 | Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
| ISO 4022:1987 | Permeable sintered metal materials — Determination of fluid permeability |
| IEC 61951-1:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60086-1:2015 | Primary batteries - Part 1: General |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 185:2005 | Grey cast irons Classification |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| EN 24003:1993 | Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977) |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| IEC 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN ISO 2738:1999 | Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999) |
| IEC 60622:2002 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.