IEC 60502:1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
01-12-1997
Language(s)
English - French
Published date
30-08-1994
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Section 1 - General
Clause
1 Scope
2 Definitions
Section 2 - Construction
3 Conductors
4 Insulation
5 Screening of ores
6 Assembly of cores, inner coverings and fillers
7 Metallic layers for single-core and multicore cables
8 Metallic screen
9 Concentric conductor
10 Metallic sheath
11 Metallic armour
Tables 1 to 4
Section 3 - Test requirements
13 Test conditions
14 Routine tests
15 Special tests
16 Type tests, electrical
17 Type tests, non-electrical
18 Electrical test after installation
Tables 5 to 12
Annexes
A The fictitious calculation method for determination of
dimensions of protective coverings
B Rounding of numbers
Specifies the construction, dimensions and test requirements of power cables with extruded solid insulation of the types listed in 1.2, for rated voltages (u) from 1 kV up to and including 30 kV given in 1.3, for fixed installations. Cables for special conditions of installations and service are not included.
| DocumentType |
Standard
|
| Pages |
109
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| VDE 0472-505 : 1983 | Identical |
| NEN 3620 : 2003 C1 2003 | Identical |
| VDE 0272 : 1989 | Identical |
| VDE 0273 : 1987 | Identical |
| DIN VDE 0472-505 : 1983 | Identical |
| NBN IEC 502 : 1994 | Identical |
| BS 6622:1985 | Similar to |
| ESI 43-13 : ISSUE 2 | AERIAL BUNDLED CONDUCTORS (ABC) INSULATED WITH CROSS LINKED POLYETHYLENE FOR LOW VOLTAGE OVERHEAD DISTRIBUTION |
| NF EN 60684-3-282 : 2010 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 282: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, STRESS CONTROL |
| BS EN 45510-2-8:2004 | Guide for procurement of power station equipment Electrical equipment - Power cables |
| CEI UNI EN 45510-2-8 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
| PREN ISO 12696 : DRAFT 2009 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
| I.S. HD 622:1999 | POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6(7,2) KV UP TO AND INCLUDING 20,8/36(42) KV WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| HD 603 S1:1994/A3:2007 | DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
| EN 45510-2-8 : 2004 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
| EN 60719:1993 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| ENA TS 09-17 : ISSUE 2 AMD 1 1995 | SINGLE CORE CABLES FOR USE IN SUBSTATIONS HAVING EXTRUDED INSULATION AND RATED VOLTAGES OF 6350/11000 VOLTS AND 19000/33000 VOLTS |
| ENA TS 09-13 : ISSUE 1 AMD 1 1993 | PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPES CABLES UP TO AND INCLUDING 33000 VOLTS |
| API RP 17I : 1996 | INSTALLATION GUIDELINES FOR SUBSEA UMBILICALS |
| I.S. EN 12696:2000 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
| NF EN 60684-3-281 : 2010 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 281: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, SEMICONDUCTIVE |
| 98/232755 DC : DRAFT DEC 1998 | IEC 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| IEEE C37.63-2013 REDLINE | IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV |
| HD 627 S1:1996/A2:2005 | MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
| I.S. HD 627:2003 | MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
| VDE 0299-2 : 1994 | CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
| VDE 0278-623 : 97 AMD 1 2004 | POWER CABLE ACCESSORIES WITH RATED VOLTAGES U UP TO 30 KV (U[M] UP TO 36 KV) - PART 623: SPECIFICATION FOR JOINTS, STOP ENDS AND OUTDOOR TERMINATIONS FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
| BS 5467:1977 | Specification for armoured cables with thermosetting insulation for electricity supply |
| BS 6622:1991 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V |
| BS 6883:1991 | Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units |
| BS 5467:1989 | Specification for cables with thermosetting insulation for electricity supply for rated voltages of up to and including 600/1000 V and up to and including 1900/3300 V |
| DIN EN 60719 : 1994 | CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
| 09/30185957 DC : 0 | BS EN ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
| BS 6349-3:1988 | Maritime structures Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates |
| 08/30184557 DC : DRAFT JUNE 2008 | BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV |
| BS EN 60719:1993 | Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| 05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| NF EN 60684-3-280 : 2010 AMD 1 2014 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING |
| CEI 20-60 : 1999 | POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO INCLUDING 20,8/36 (42) KV |
| I.S. HD 603:2007 | DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| BS 6899:1984 | Specification for rubber insulation and sheath of electric cables |
| BS 6899:1991 | Specification for rubber insulation and sheath of electric cables |
| BS 7870-2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Methods of test |
| EN 45510-2-8:2004 | Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables |
| ENA TS 09-20 : ISSUE 1 AMD 1 1993 | SINGLE CORE CABLES HAVING CROSS LINKED POLYETHYLENE INSULATION AND LEAD SHEATH FOR RATED VOLTAGE 19000/33000 VOLTS (UM = 36000 VOLTS) |
| NFC 33 051 : 96 AMD 1 1998 XP | INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS - SCREENED SEPARABLE CONNECTORS AND ASSOCIATED DEVICES FOR RATED VOLTAGES FROM 6/10 (12) KV UP TO 18/30 (36) KV |
| ESI 09-20 : ISSUE 1 AMD 1 | SINGLE CORE CABLES HAVING CROSS LINKED POLYETHYLENE INSULATION AND LEAD SHEATH FOR RATED VOLTAGE 19000/33000 VOLTS (UM = 36000 VOLTS) |
| ESI 09-16 : ISSUE 1 | TESTING SPECIFICATION FOR METALLIC SHEATHED POWER CABLES WITH EXTRUDED CROSS LINKED POLYETHYLENE INSULATION AND ACCESSORIES FOR SYSTEM VOLTAGES OF 66kV AND 132kV |
| BS 7769-1.1:1997 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses General |
| ESI 09-13 : ISSUE 1 | PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPE CABLES UP TO AND INCLUDING 33000 VOLTS |
| IEEE 1246-2011 REDLINE | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
| IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| BS EN 12696:2000 | Cathodic protection of steel in concrete |
| IEC 60719:1992 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| I.S. EN 45510-2-8:2004 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
| 95/215891 DC : DRAFT DEC 1995 | PREN 50213 - PRIMARY CABLES FOR AIRPORT LIGHTING |
| ESI 09-17 : ISSUE 2 | SINGLE CORE CABLES FOR USE IN SUBSTATIONS HAVING EXTRUDED INSULATION AND RATED VOLTAGES OF 6350/11000 VOLTS AND 19000/33000 VOLTS |
| 09/19987837 DC : 0 | BS IEC 60364-7-713 ED2 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-713: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - FURNITURE |
| HD 623 : S1 AMD 11 2001 | SPECIFICATION FOR JOINTS, STOP ENDS AND OUTDOOR TERMINATIONS FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1,0 KV |
| 05/30138201 DC : DRAFT AUG 2005 | ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
| CEI EN 60719 : 1997 | CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
| I.S. 201-13:2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 13: OIL RESISTANT PVC SHEATHED CABLES WITH TWO OR MORE CONDUCTORS |
| IEEE 1511.1 : 2010 | GUIDE FOR INVESTIGATING AND ANALYZING SHIELDED POWER CABLE FAILURES ON SYSTEMS RATED 5 KV THROUGH 46 KV |
| BS 5468:1977 | Specification for cross-linked polyethylene insulation of electric cables |
| UNI CEI EN 45510-2-8 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
| CEI 20-56 : 2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV SOMMARIO |
| I.S. HD 623:1999 | SPECIFICATION FOR JOINTS, STOP ENDS AND OUTDOOR TERMINATIONS FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1,0 KV |
| HD 622 S1:1996/A2:2005 | Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| EN 12696:2000 | Cathodic protection of steel in concrete |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
| IEC 60230:1966 | Impulse tests on cables and their accessories |
| IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
| IEC 60885-2:1987 | Electrical test methods for electric cables. Part 2: Partial discharge tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.