IEC 60754-1:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
27-11-2019
Superseded by
Published date
17-11-2011
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Test method principle
5 Test apparatus
6 Test specimen
7 Test procedure
8 Evaluation of the test results
9 Performance requirement
10 Test report
Annex A (informative) - Determination of the halogen acid
gas content of a sample representative of a cable
construction
Bibliography
IEC 60754-1:2011 specifies the apparatus and procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from electric or optical fibre cable constructions. The method specified in this standard is intended for the testing of individual components used in a cable construction. The use of this method will enable the verification of requirements which are stated in the appropriate cable specification for individual components of a cable construction. The significant technical changes with respect to the previous edition are as follows:
- improved definition of safety requirements relating to capture of gases and use of reagents;
- introduction of guidance on preparation of test specimens for a more even combustion;
- improvements to the procedure for establishing the heating regime;
- improved expression of tolerances and precision;
- definition of the procedure for the blank test;
- introduction of an informative annex giving details of a methodology for the determination of the halogen acid gas content of a sample representative of a cable construction.
The contents of the corrigendum of November 2013 have been included in this copy.
| Committee |
TC 20
|
| DevelopmentNote |
COR 1 applies to the French text only. (11/2013) Stability Date: 2018. (11/2017) NEW CHILD AMD 1 2019 IS ADDED.
|
| DocumentType |
Standard
|
| ISBN |
9782889127153
|
| Pages |
53
|
| ProductNote |
NEW CHILD AMD 1 2019 IS ADDED.
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST IEC 60754-1 : 2015 | Identical |
| NF EN 60754-1 : 2014 | Identical |
| NBN EN 60754-1 : 2014 | Identical |
| NEN EN IEC 60754-1 : 2014 | Identical |
| AS/NZS IEC 60754.1:2017 | Identical |
| PN-EN 60754-1:2014-11 | Identical |
| DIN EN 60754-1 : 2015 | Identical |
| VDE 0482-754-1 : 2015 | Identical |
| I.S. EN 60754-1:2014/A1:2020 | Identical |
| UNE-EN 60754-1:2014 | Identical |
| BS EN 60754-1:2014 | Identical |
| CEI EN 60754-1 : 2015 | Identical |
| EN 60754-1:2014 | Identical |
| BS 6425-1:1990 | Similar to |
| SAC GB/T 17650.1 : 1998 | Identical |
| CEI 20-37 : 1985 COR 1988 | Identical |
| CEI 20-37/2 : 2ED 1997 | Identical |
| GOST R IEC 60754-1 : 1999 | Identical |
| UNE 21147-1:1994 | Identical |
| BS 6425-1:1983 | Similar to |
| CEI 18-49 : 2013 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 350: GENERAL CONSTRUCTION AND TEST METHODS OF POWER, CONTROL AND INSTRUMENTATION CABLES FOR SHIPBOARD AND OFFSHORE APPLICATIONS |
| 07/30164222 DC : 0 | BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES |
| IEC 61196-9:2014 | Coaxial communication cables - Part 9: Sectional specification for RF flexible cables |
| CEI EN 50290-2-36 : 1ED 2017 | COMMUNICATION CABLES - PART 2-36: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED SILICONE RUBBER INSULATION COMPOUND |
| 14/30289997 DC : 0 | BS EN 62893-1 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| IEC TR 60092-370:2009 | Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables |
| I.S. EN 50290-2-36:2016 | COMMUNICATION CABLES - PART 2-36: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED SILICONE RUBBER INSULATION COMPOUND |
| UNE-IEC 60092-360:2015 | Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
| NF EN 60695-5-1 : 2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
| I.S. HD 622:1999 | POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6(7,2) KV UP TO AND INCLUDING 20,8/36(42) KV WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
| IEC 62821-1:2015 | Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
| 03/318326 DC : DRAFT NOV 2003 | |
| EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet |
| EN 187103:2003 | Family specification - Optical fibre cables for indoor applications |
| EN 60695-5-1:2003 | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
| HD 603 S1:1994/A3:2007 | DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C |
| CEI 18-64 : 2008 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 4: CABLES |
| EN 50151 : 2003 COR 2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIAL REQUIREMENTS FOR COMPOSITE INSULATORS |
| ANSI/NEMA 62321-3-2:2020 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC) |
| 04/30114758 DC : 0 | IEC 60092-350 ED.3 - ELECTRICAL INSTALLATION IN SHIP - PART 350: SHIPBOARD POWER CABLES - GENERAL CONSTRUCTION AND TEST REQUIREMENTS |
| I.S. EN 50151:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIAL REQUIREMENTS FOR COMPOSITE INSULATORS |
| BS IEC 61196-9:2014 | Coaxial communication cables Sectional specification for RF flexible cables |
| I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| BS IEC 60092-306:2009 | Electrical installations in ships Equipment. Luminaires and lighting accessories |
| PREN 50626-1 : DRAFT 2017 | CONDUIT SYSTEMS BURIED UNDERGROUND FOR THE PROTECTION AND MANAGEMENT OF INSULATED ELECTRICAL CABLES OR COMMUNICATION CABLES - PART 1: GENERAL REQUIREMENTS |
| BS EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C |
| CEI EN 50551-2 : 2014 | SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U |
| I.S. EN 62012-1:2002 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 50411-3-5:2015 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5: WALL OUTLET |
| UNE-IEC 60092-306:2010 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
| BS EN 61386-1:2008 | Conduit systems for cable management General requirements |
| I.S. EN 50551-2:2013 | SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U |
| IEC 60092-354:2014 | Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) |
| HD 627 S1:1996/A2:2005 | MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
| NF EN 60794-1-1 : 2002 | OPTICAL FIBER CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
| I.S. HD 627:2003 | MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
| IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
| IEC 60092-353:2016 | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
| IEC PAS 60794-2-50:2004 | Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords |
| IEC 60092-376:2017 RLV | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
| PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings |
| BS 6425-1:1990 | Test on gases evolved during the combustion of materials from cables Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables |
| CEI EN 62329-2 : 2007 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
| 16/30326336 DC : 0 | BS EN 63010-1 - ELECTRIC CABLES - HALOGEN-FREE THERMOPLASTIC INSULATED AND SHEATHED FLEXIBLE CABLES OF RATED VOLTAGES UP TO AND INCLUDING 300/300 V - PART 1: GENERAL REQUIREMENTS |
| 18/30369843 DC : DRAFT APR 2018 | BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY |
| I.S. EN 60695-5-1:2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| 03/320275 DC : DRAFT DEC 2003 | IEC 61196-6 ED.1 - COAXIAL COMMUNICATION CABLES - PART 6: SECTIONAL SPECIFICATION FOR CATV DROP CABLES |
| TS 102 874-6 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS |
| NF EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
| UNE-IEC 60092-353:2017 | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
| 08/30191891 DC : DRAFT OCT 2008 | BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| 05/30131385 DC : DRAFT MAR 2005 | IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION |
| 07/30164159 DC : 0 | BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES |
| UNE-IEC 60092-350:2015 | Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications |
| UNE-EN 50290-2-36:2016 | Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound |
| CEI 20-60 : 1999 | POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO INCLUDING 20,8/36 (42) KV |
| I.S. HD 603:2007 | DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
| CSA C22.3 No. 61936-1 : 2008 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| CSA C22.3 No. 61936-1 : 2008 : R2015 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| PREN 13501-6 : DRAFT 2017 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
| IEC 61196-4:2015 | Coaxial communication cables - Part 4: Sectional specification for radiating cables |
| IEC 62329-2:2006 | Heat-shrinkable moulded shapes - Part 2: Methods of test |
| IEC 60695-5-1:2002 | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
| IEC 60092-353:2016 RLV | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| NF EN 62321-3-2 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| 00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| 17/30348256 DC : 0 | BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
| CEI EN 61386-1 : 2009 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
| MIL-PRF-32514 Base Document:2015 | INSULATION, ANTI-SWEAT, REFRIGERANT, AND THERMAL FOAM |
| CEI EN 62012-1 : 2003 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION |
| 14/30313775 DC : 0 | BS EN 62893-3 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 3: CABLES FOR AC CHARGING ACCORDING TO MODES 1, 2 AND 3 OF IEC 61851-1 |
| IEC 61892-4:2007 | Mobile and fixed offshore units - Electrical installations - Part 4: Cables |
| IEC 60092-352:2005 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
| I.S. EN 187103:2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
| I.S. EN 61386-1:2008 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| UNE-IEC 60092-376:2017 | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
| BS EN 50151:2003 | Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators |
| I.S. EN 61936-1:2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| IEC 60092-350:2014 | Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications |
| IEC 61196-11:2016 | Coaxial communication cables - Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric |
| IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
| IEC TS 60695-5-2:2002 | Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods |
| IEC 61386-1:2008+AMD1:2017 CSV | Conduit systems for cable management - Part 1: General requirements |
| IEC 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
| BS EN 61936-1 : 2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
| 10/30230568 DC : 0 | BS EN 61892-3 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
| UNE-EN 61936-1:2012 | Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
| UNE-IEC 61892-4:2016 | Mobile and fixed offshore units - Electrical installations - Part 4: Cables |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| BS EN 187103:2003 | Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications |
| BIS IS/IEC 60794-1-1 : 2001 | OPTICAL FIBRE CABLES - PART 1: GENERIC SPECIFICATION - SECTION 1: GENERAL |
| CEI EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
| 01/208798 DC : DRAFT JAN 2002 | IEC 60695-5-3 TS - FIRE HAZARD TESTING - PART 5-3: CORROSION DAMAGEEFFECTS OF FIRE EFFLUENT - LEAKAGE CURRENT AND METAL LOSS TEST METHOD |
| 15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| BS 7630:1993 | Generic specification for symmetric pair/quad and multicore cables for digital communication |
| BS EN 50551-2:2013 | Simplex and duplex cables to be used for cords Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| CEI EN 60695-5-1 : 2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
| 03/308375 DC : DRAFT JUNE 2003 | IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS |
| BS EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Wall outlet |
| 12/30265027 DC : 0 | BS EN 61196-9 ED.1 - COAXIAL COMMUNICATION CABLES - PART 9: SECTIONAL SPECIFICATION FOR FLEXIBLE RF COAXIAL CABLES |
| IEC 60754-3:2018 | Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography |
| BS IEC 61892-3:2012 | Mobile and fixed offshore units. Electrical installations Equipment |
| BS EN 60695-5-1:2003 | Fire hazard testing. Assessment of potential corrosion damage by fire effluent General guidance |
| BS EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification |
| I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| UNI CEI EN 45510-2-8 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
| UNE-IEC 60092-354:2015 | Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) |
| I.S. EN 50411-3-8:2016 | FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
| UNE-IEC 60092-352:2015 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
| BIS IS 16197-3-2 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3: SCREENING - SECTION 2: TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| TS 105 175-1 : 2.0.0 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S |
| IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| IEC 63010-1:2017 | Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 1: General requirements and cables |
| IEC 60092-376:2017 | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
| IEC 60092-306:2009 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| EN 50290-2-36:2016 | Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound |
| EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
| EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
| EN 50551-2:2013 | Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U |
| EN 61386-1:2008 | Conduit systems for cable management - Part 1: General requirements |
| EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| CEI 18-58 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| ISO 385:2005 | Laboratory glassware — Burettes |
| AS/NZS IEC 60092.376:2020 | Electrical installations in ships Cables for control and instrumentation circuits 150/250 V (300 V) |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| AS/NZS IEC 60092.360:2020 | Electrical installations in ships Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
| AS/NZS 60092.354:2020 | Electrical installations in ships Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) (IEC 60092-354:2014 (ED.3.0) MOD) |
| AS/NZS IEC 60092.353:2020 | Electrical installations in ships Power cables for rated voltages 1 kV and 3 kV |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.