ISO 10780:1994
Current
Current
The latest, up-to-date edition.
Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
10-11-1994
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies manual methods for determining the velocity and volume flowrate of gas streams in ducts, stacks and chimneys vented to the atmosphere. Specifies the use of two types of Pitot tubes, type L und type S, for determining the velocity and the volume flowrate for each type of Pitot tube. Applies to gas streams with essentially constant density, temperature, flowrate and pressure at the sampling point.
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| VDI 2066 Blatt 1:1975-10 | Similar to |
| UNE 77225:2000 | Identical |
| BS ISO 2889:2010 | Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities |
| UNE-EN ISO 16170:2017 | In situ test methods for high efficiency filter systems in industrial facilities (ISO 16170:2016, Corrected version 2017-04) |
| 11/30239461 DC : 0 | BS EN ISO 16911-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF VELOCITY AND VOLUMETRIC FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| BS ISO 25597:2013 | Stationary source emissions. Test method for determining PM<sub>2,5</sub> and PM<sub>10</sub> mass in stack gases using cyclone samplers and sample dilution |
| FD X43 319 : 2010 FD | STATIONARY SOURCE EMISSIONS - GUIDE FOR SAMPLING AND ANALYSIS OF VOLATILE ORGANIC COMPOUNDS |
| I.S. EN ISO 16170:2016 | IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016, CORRECTED VERSION 2017-04) |
| CSA N288.5 : 2011 : R2016 | EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
| I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| ISO 12141:2002 | Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method |
| ISO 16170:2016 | In situ test methods for high efficiency filter systems in industrial facilities |
| S.R. CWA 45547:2004 | MANUAL FOR DETERMINATION OF COMBINED HEAT AND POWER (CHP) |
| DIN EN ISO 16170:2013-07 (Draft) | IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016) |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| 08/30161739 DC : DRAFT MAY 2008 | BS EN ISO 11771 - AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| ISO 25597:2013 | Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution |
| 14/30280137 DC : 0 | BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| 12/30230597 DC : 0 | BS ISO 25597 - STATIONARY SOURCE EMISSIONS - TEST METHOD FOR DETERMINING PM2,5 AND PM10 MASS IN STACK GASES USING CYCLONE SAMPLERS AND SAMPLE DILUTION |
| NF ISO 2889 : 2010 | SAMPLING AIRBORNE RADIOACTIVE MATERIALS FROM THE STACKS AND DUCTS OF NUCLEAR FACILITIES |
| 14/30303591 DC : 0 | BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| BS EN ISO 11771:2010 | Air quality. Determination of time-averaged mass emissions and emission factors. General approach |
| I.S. EN ISO 13833:2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION (ISO 13833:2013) |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| FD X43 131 : 2005 FD | STATIONARY SOURCE EMISSIONS - PRACTICAL GUIDANCE FOR ESTIMATING THE INCERTAINTY IN MEASUREMENT OF POLLUTANT CONCENTRATIONS - PART 1: GENERAL - PART 2: AUTOMATIC MEASUREMENT - PART 3: DUST MEASUREMENT - PART 4: MANUAL MEASUREMENT OF A PARTICULATE GASEOUS POLLUTANT SPARGING - PART 5: MANUAL MEASUREMENT OF POLYCYCLIC AROMATIC HYDROCARBONS AND DIOXINS/FURARES - PART 6: MOISTURE |
| ASTM D 6331 : 2016 : REDLINE | Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| VDI 3460 Blatt 1:2014-02 | Emission control - Thermal waste treatment - Fundamentals |
| VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
| DIN EN ISO 16170:2017-05 | IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016) |
| VDI 3880:2011-10 | Olfactometry - Static sampling |
| DIN EN ISO 16170 E : 2017 | IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016) |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| 10/30173701 DC : 0 | BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| 03/315090 DC : DRAFT SEP 2003 | ISO 15713 - STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF GASEOUS-FLUORIDE CONTENT |
| BS ISO 12141:2002 | Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method |
| BS ISO 18466:2016 | Stationary source emissions. Determination of the biogenic fraction in C O<sub>2</sub> in stack gas using the balance method |
| 11/30227244 DC : 0 | BS EN ISO 13833 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION |
| 07/30134856 DC : DRAFT AUG 2007 | BS ISO 2889 - SAMPLING AIRBORNE RADIOACTIVE MATERIALS FROM THE STACKS AND DUCTS OF NUCLEAR FACILITIES |
| 99/565449 DC : DRAFT OCT 99 | DRAFT BS EN 13725 - AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OFFACTOMETRY |
| BS ISO 15713:2006 | Stationary source emissions. Sampling and determination of gaseous fluoride content |
| 16/30346835 DC : 0 | BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS |
| 02/203214 DC : DRAFT MAR 2002 | IEC 62282-3-2 - FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER PLANTS - TEST METHODS FOR THE PERFORMANCE |
| S.R. CEN/TR 17078:2017 | STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN ISO 16911-1 |
| ISO 18466:2016 | Stationary source emissions — Determination of the biogenic fraction in CO2 in stack gas using the balance method |
| ISO 15713:2006 | Stationary source emissions Sampling and determination of gaseous fluoride content |
| IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| ONORM EN 13725 : 2006 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
| UNI EN ISO 16911-1 : 2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
| BS EN ISO 16170:2016 | In situ test methods for high efficiency filter systems in industrial facilities |
| DIN EN ISO 11771:2011-04 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| 13/30248319 DC : 0 | BS EN ISO 16170 - IN SITU TEST METHODS FOR VERY HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES |
| BS EN ISO 16911-1:2013 | Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts Manual reference method |
| BS EN ISO 13833:2013 | Stationary source emissions. Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide. Radiocarbon sampling and determination |
| BS ISO 9096:2017 | Stationary source emissions. Manual determination of mass concentration of particulate matter |
| BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| CSA N288.5 : 2011 | EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
| UNI EN ISO 11771 : 2011 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| UNI EN ISO 13833 : 2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION |
| NF ISO 15713 : 2006 | STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF GASEOUS FLUORIDE CONTENT |
| ISO 2889:2010 | Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities |
| ISO 14164:1999 | Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method |
| ISO 16911-1:2013 | Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method |
| UNE-EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| ISO 11771:2010 | Air quality Determination of time-averaged mass emissions and emission factors General approach |
| ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
| EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| NF EN 13725 : 2003 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
| EN ISO 11771:2010 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| I.S. EN 13725:2003 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
| PD CEN/TR 17078:2017 | Stationary source emissions. Guidance on the application of EN ISO 16911-1 |
| UNE-EN ISO 11771:2011 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| DIN EN ISO 13833:2013-07 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION (ISO 13833:2013) |
| ISO 10396:2007 | Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| 17/30326671 DC : 0 | BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
| UNE-EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| 15/30300279 DC : 0 | BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT |
| BS ISO 14164:1999 | Stationary source emissions. Determination of the volume flowrate of gas streams in ducts. Automated method |
| DIN EN ISO 16911-1:2013-06 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013); German version EN ISO 16911-1:2013 |
| BS ISO 10396:2007 | Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| 16/30275160 DC : 0 | BS ISO 18466 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE BIOGENIC FRACTION IN CO[2]IN STACK GAS USING THE BALANCE METHOD |
| I.S. EN ISO 16911-1:2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013) |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| NF ISO 10396 : 2007 | STATIONARY SOURCE EMISSIONS - SAMPLING FOR THE AUTOMATED DETERMINATION OF GAS EMISSION CONCENTRATIONS FOR PERMANENTLY-INSTALLED MONITORING SYSTEMS |
| I.S. EN ISO 11771:2010 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| IEC 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| CEN/TR 17078:2017 | Stationary source emissions - Guidance on the application of EN ISO 16911-1 |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.