ISO 2859-2:1985
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
15-02-2020
Superseded by
Language(s)
English, French
Published date
29-08-1985
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Can be used when the switching rules in ISO 2859-1 are not applied. Indexing is by a preferred series of limiting qualities with a consumer's risk usually below 10 % and always below 13 %. Procedures are provided to cater for two situations: Procedure A to be used when the supplier and the consumer both wish to regard the lot in isolation (shall be used unless there is a specific instruction to use procedure B), procedure B to be used when the supplier regards the lot as one of continuing series but the consumer considers the lot received in isolation.
| DevelopmentNote |
Also numbered as BS 6001(1993). (06/2004) DRAFT ISO/DIS 2859-2 is also available for this standard. (11/2007)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| JIS Z 9015-2:1999 | Identical |
| BIS IS 2500-3 : 1995(R2004) | Identical |
| NBN ISO 2859 2 : 1993 | Identical |
| UNE 66020-2:2001 | Identical |
| AS 1199.2-2003 | Identical |
| UNE-ISO 2859-2:2012 | Identical |
| UNI ISO 2859-2 : 1993 | Identical |
| PN ISO 2859-2 : 1996 | Identical |
| NS ISO 2859-2 : 1ED 1985 | Identical |
| DIN ISO 2859-2:1993-04 | Identical |
| BS 6001-2:1984 | Similar to |
| UNE 66020-2:1988 | Identical |
| ISO 11596:2008 | Jewellery Sampling of precious metal alloys for and in jewellery and associated products |
| CEI EN 62058-11 : 2011 | ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| UNI CEN/TS 13476-4 : 2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 2859-5:2005 | Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| BS ISO 3951-2:2013 | Sampling procedures for inspection by variables General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
| DD CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity |
| BS ISO 3951-1:2013 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BS 6002-2:2007 | Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| BS ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| 12/30247200 DC : 0 | BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| I.S. EN 12206-1:2004 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| 10/30219542 DC : 0 | BS 6001-1/A1 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| CEI EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| BS ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| PD CR 13909:2002 | Identification card systems. Intersector thin flexible cards. Acceptance criteria |
| BS ISO 12686:1999 | Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| BS ISO 3534-2:2006 | Statistics. Vocabulary and symbols Applied statistics |
| BS ISO 6305-2:2007 | Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
| CEI EN 60300-3-2 : 2006 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| CSA C1325 : 1999 : R2016 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| UNE-EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| CEI EN 61325 : 1998 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| I.S. EN 61325:1997 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| CEI EN 50365 : 2004 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| UNE-ISO 2859-1:2012 | Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| 17/30333593 DC : 0 | BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING |
| UNI CEN ISO/TS 22391-7 : 2012 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 3951-5:2006 | Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| I.S. EN 448:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 12470-1:2009-11 | Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| BS EN 12006-2 : 1998 | NON-ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| BS EN 326-3:2003 | Wood-based panels. Sampling, cutting and inspection Inspection of an isolated lot of panels |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
| BS EN 12737 : 2004 | PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| VDE 0212-3 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| DIN EN 12470-3:2000-04 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| EN 125000:1997 | Generic Specification: Cores made of ferrite materials |
| DIN EN ISO 186:2002-08 | Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
| EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| EN 60300-3-2:2005 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
| EN 13549:2001 | Cleaning services - Basic requirements and recommendations for quality measuring systems |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| EN 12470-2:2000+A1:2009 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
| EN 12470-3:2000+A1:2009 | Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
| EN 12470-1:2000+A1:2009 | Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS 6001-0:2006 | Sampling procedures for inspection by attributes Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes |
| ENV 1401-2:2000 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| OVE/ONORM EN 50397-2 : 2010 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| BS 6001-0(2017) : 2017 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
| 14/30294476 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN 12470-5:2003 | CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE) |
| UNI ISO/TR 8550-2 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 2: SAMPLING BY ATTRIBUTES |
| BS EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| BS EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Accessories for covered conductors. Tests and acceptance criteria |
| UNI ISO 2859-10 : 2007 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
| S.R. CR 13909:2000 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA |
| BS EN 350:2016 | Durability of wood and wood-based products. Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| 03/312758 DC : DRAFT AUG 2003 | ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
| BS ISO 28590:2017 | Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| 07/30161646 DC : 0 | BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 125000:1999 | CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION) |
| NF EN 61854 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| I.S. EN 62058-11:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| UNE-EN 62058-11:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
| UNE-ISO 2859-5:2014 | Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| I.S. EN 61897:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
| I.S. EN 60300-3-2:2005 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| PREN 448 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) |
| NF EN 50365 : 2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| I.S. CEN TS 1555-7:2003 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| NF EN 12206-1 : 2011 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| DIN EN 12470-2:2009-11 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers (includes Amendment A1:2009) |
| DIN EN 326-3:2004-02 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| DIN EN ISO 4589-2:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| IEC 62058-11:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| BS EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling |
| IEC 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| BS EN 12470-3 : 2000 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| DIN EN 12470-5:2003-09 | CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE) |
| DIN EN 12470-4:2001-02 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| DIN EN 12206-1:2004-09 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| I.S. EN 295-2:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| I.S. EN ISO 4589-2:2017 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| I.S. EN 326-3:2003 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS |
| I.S. EN 12470-2:2000 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| I.S. EN 12470-1:2000 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| I.S. EN 12737:2004 | PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
| ONORM EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| BS 6002-1:2007 | Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| NF EN 62058-11 : 2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| BS ISO/TR 12031:2000 | Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration |
| BIS IS 2500-1 : 2000(R2017) | SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| BS EN 62058-11:2010 | Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
| 15/30312397 DC : 0 | BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| BS ISO 7198:1998 | Cardiovascular implants. Tubular vascular prostheses |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| 97/101296 DC : DRAFT FEB 1997 | PREN 12737 - PRECAST CONCRETE FLOOR SLATS FOR LIVESTOCK |
| 07/30167025 DC : 0 | BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| BS ISO 10587:2000 | Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method |
| 04/19983407 DC : DRAFT OCT 2004 | BS 6001-10 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: OVERVIEW OF THE BS 6001 (ISO 2859) ATTRIBUTE SAMPLING SYSTEMS |
| BS ISO 4589-2 : 1996 AMD 10627 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - AMBIENT-TEMPERATURE TEST |
| BS 6001-0:1996 | Sampling procedures for inspection by attributes Introduction to the BS 6001 attribute sampling system |
| 02/121776 DC : DRAFT APR 2002 | PREN 14403 - SAMPLING OF THE PRECIOUS METAL ALLOYS IN JEWELLERY AND ASSOCIATED PRODUCTS |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| 14/30312373 DC : 0 | BS EN 350 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE RESISTANCE TO BIOLOGICAL AGENTS, THE PERMEABILITY TO WATER AND THE PERFORMANCE OF WOOD AND WOOD-BASED MATERIALS |
| BS EN 125000:1998 | Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials |
| BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| I.S. EN 16866:2017 | METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| I.S. EN ISO 17668:2016 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| NF EN 61284 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| UNI ISO 3534-2 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| UNI ISO/TR 8550-3 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling |
| ISO/TR 8550-2:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 2: Sampling by attributes |
| ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity |
| ISO 2859-0:1995 | Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system |
| DIN EN 12737:2008-02 | PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK |
| DIN EN 12470-3:2009-11 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| DIN EN 12470-4:2009-11 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| DIN EN 295-2:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 448:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 13549:2001 | Cleaning services. Basic requirements and recommendations for quality measuring systems |
| ISO 17668:2016 | Zinc diffusion coatings on ferrous products Sherardizing Specification |
| BS EN 12470-5:2003 | Clinical thermometers Performance of infra-red ear thermometers (with maximum device) |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| I.S. EN 12006-2:1998 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| UNI EN 12470-3 : 2009 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| UNI EN 12470-4 : 2009 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| UNI EN 12006-2 : 2009 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| UNI EN 12470-1 : 2009 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| UNI EN 12470-2 : 2009 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| BS 4778-2:1991 | Quality vocabulary Quality concepts and related definitions |
| UNI ISO 3951-2 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| UNI EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| 03/102273 DC : DRAFT MAR 2003 | BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH |
| PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| BS ISO 11596:2008 | Jewellery. Sampling of precious metal alloys for and in jewellery and associated products |
| 16/30319043 DC : 0 | BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST |
| PREN 295-2 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| BS 5341-6.5:1992 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements |
| BS EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
| 10/30216987 DC : 0 | BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| OIML G 20 : 2017 | SURVEILLANCE OF UTILITY METERS IN SERVICE ON THE BASIS OF SAMPLING INSPECTIONS |
| 04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| 94/110814 DC : DRAFT JAN 1995 | ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
| DD CEN/TS 1555-7:2003 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| 03/108624 DC : DRAFT JULY 2003 | IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| 16/30340580 DC : 0 | BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 60300-3-2:2005 | Dependability management Application guide. Collection of dependability data from the field |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| 07/30165568 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| UNE-ISO 3951-1:2012 | Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| BS 6002-4:2006 | Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| 07/30168266 DC : 0 | BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS |
| ISO 3951-2:2013 | Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| UNE-ISO 2859-10:2013 | Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| CR 13909:2000 | Identification card systems - Intersector thin flexible cards - Acceptance criteria |
| S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| IEC 61854:1998 | Overhead lines - Requirements and tests for spacers |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| UNE-EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| BS EN 12470-4 : 2001 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN 12470-2 : 2001 | CLINICAL THERMOMETERS - PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| BS EN ISO 186:2002 | Paper and board. Sampling to determine average quality |
| UNE-EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| UNE-EN 448:2017 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects |
| EN 16866:2017 | Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 12006-2:1998+A1:2009 | Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 12470-4:2000+A1:2009 | Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
| EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| EN ISO 17526:2003 | Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| EN 13628-2:2002 | Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
| ISO 6305-2:2007 | Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
| BS EN 61854:1998 | Overhead lines. Requirements and tests for spacers |
| 12/30245656 DC : 0 | ISO/DIS 3951-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| CEI EN 50397-2 : 2011 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| NF EN 61897 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| BS EN 61897:1999 | Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers |
| 04/30110040 DC : DRAFT FEB 2004 | BS 6001-4 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 4: SYSTEM OF SEQUENTIAL SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| UNE-ISO 3534-2:2013 | Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
| UNI ISO 3951-1 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| ISO/TR 12031:2000 | Micrographics Inspection of silver-gelatin microforms for evidence of deterioration |
| BS EN 16866:2017 | Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| BS ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| S.R. CEN ISO/TS 22391-7:2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011) |
| SAE ARP9013 | Statistical Product Acceptance Requirements |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 00/564528 DC : DRAFT SEP 2000 | BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS |
| 07/30152250 DC : 0 | BS ISO 11596 - SAMPLING OF THE PRECIOUS METAL ALLOYS FOR AND IN JEWELLERY AND ASSOCIATED PRODUCTS |
| CSA C1325 : 1999 : R2011 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| UNI ISO/TR 8550-1 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING |
| I.S. EN 50397-2:2009 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| I.S. EN 50365:2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| 18/30368651 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| I.S. EN 350:2016 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE DURABILITY TO BIOLOGICAL AGENTS OF WOOD AND WOOD-BASED MATERIALS |
| SAE ARP9013/1 | Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods |
| ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach |
| UNI CEN/TS 1401-2 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGRONUD DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| BS EN 448:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| DIN EN 12006-2:2009-08 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| BS EN 13628-2:2002 | Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography Industrial methods |
| BS EN 12470-1 : 2000 | CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| EN 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| BS 6001-1(1999) : 1999 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| EN 12737:2004+A1:2007 | Precast concrete products - Floor slats for livestock |
| EN 12470-5:2003 | Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
| EN 62058-11:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
| EN 61325:1995 | Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| BS 6001-4:2005 | Sampling procedures for inspection by attributes System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria |
| BS 627(1991) : 1991 AMD 8670 | METHODS FOR SAMPLING OF ANIMAL AND VEGETABLE FATS AND OILS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.