ISO 3251:2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Paints, varnishes and plastics Determination of non-volatile-matter content
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-05-2019
Superseded by
Language(s)
English, French, Russian
Published date
31-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 3251:2008 specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions, etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners and film-forming agents). For the method to be usable for unplasticized polymer dispersions and rubber latices, the non-volatile residue (which consists essentially of the polymeric material and of small quantities of auxiliaries such as emulsifiers, protective colloids, stabilizers, solvents added as film-forming agents and especially for rubber latex concentrate preserving agents) has to be chemically stable under the test conditions. For plasticized samples, the residue, by definition, normally includes the plasticizer.
| DevelopmentNote |
Supersedes ISO 1515 (04/2001) Supersedes ISO 1625 and ISO 8618. (03/2003) DRAFT ISO/DIS 3251 is also available for this standard. (05/2018)
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN ISO 3251:2008 | Identical |
| NBN EN ISO 3251 : 2008 | Identical |
| PN EN ISO 3251 : DEC 2008 | Identical |
| SN EN ISO 3251 : 2008 | Identical |
| BS EN ISO 3251:2008 | Identical |
| NS EN ISO 3251 : 3ED 2008 | Identical |
| UNE-EN ISO 3251:2008 | Identical |
| NF EN ISO 3251 : 2008 | Identical |
| ONORM EN ISO 3251 : 2008 | Identical |
| NEN EN ISO 3251 : 2008 | Identical |
| DIN EN ISO 3251:2008-06 | Identical |
| I.S. EN ISO 3251:2008 | Identical |
| UNI EN ISO 3251 : 2008 | Identical |
| BS 3900-B18(1994) : AMD 8689 | Identical |
| 02/208319 DC : DRAFT SEP 2002 | IEC 60455-3-5 ED.3 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS |
| DIN EN 13381-5:2015-02 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| 15/30327431 DC : 0 | BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES |
| BS 3900-D11:1998 | Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| UNI EN 13381-5 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF - STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| 10/30215721 DC : 0 | BS EN ISO 3233 - PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING |
| 09/30192396 DC : DRAFT APR 2009 | BS ISO 18280 - PLASTICS - EPOXY RESINS - TEST METHODS |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| 13/30236314 DC : 0 | BS EN ISO 4618 - PAINTS AND VARNISHES - TERMS AND DEFINITIONS |
| BS EN ISO 3233-2:2014 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle |
| BS 6782-16.1(2000) : 2000 AMD 15238 | BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS FOR TEST FOR ALKYD RESINS - SECTION 16.1: GENERAL METHODS |
| DIN 55671:2002-09 | PAINTS, VARNISHES AND BINDERS FOR PAINTS AND VARNISHES - FOIL METHOD FOR RAPID DETERMINATION OF THE NON-VOLATILE MATTER CONTENT |
| BS 6782-14.1(2000) : 2000 AMD 10883 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.1 - GENERAL METHODS |
| BS EN 16074:2011 | Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| ISO 21809-1:2011 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
| I.S. EN 15060:2006 | PAINTS AND VARNISHES - GUIDE FOR THE CLASSIFICATION AND SELECTION OF COATING SYSTEMS FOR WOOD BASED MATERIALS IN FURNITURE FOR INTERIOR USE |
| EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| EN 13121-1:2003 | GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS EN ISO 11909:2007 | Binders for paints and varnishes. Polyisocyanate resins. General methods of test |
| ISO 3233-3:2015 | Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
| DIN ISO 4619:2002-04 | DRIERS FOR PAINTS AND VARNISHES |
| EN 10339:2007 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 13381-5:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member |
| DIN EN ISO 3233-3:2015-09 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015) |
| DIN ISO 4619 E : 2002 | DRIERS FOR PAINTS AND VARNISHES |
| BS EN ISO 4619:2010 | Driers for paints and varnishes |
| 11/30242926 DC : DRAFT MAY 2011 | BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS |
| I.S. EN ISO 16000-11:2006 | INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
| BS 6782-17(2001) : 2001 AMD 15242 | BINDERS FOR PAINTS - DETERMINATION OF MEQ VALUE OF WATER-DILUTABLE BINDERS |
| UNI EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
| UNI ISO 124 : 2014 | LATEX, RUBBER - DETERMINATION OF TOTAL SOLIDS CONTENT |
| I.S. EN ISO 2114:2000 | PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE |
| BS EN 4594:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS ISO 15741:2016 | Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 19396-2:2017 | Paints and varnishes. Determination of pH value pH electrodes with ISFET technology |
| DIN EN ISO 3233-1:2013-05 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| 12/30256053 DC : 0 | BS EN 16383 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
| 98/123516 DC : DRAFT JULY 1998 | PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
| UNI EN ISO 3233-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 07/30174613 DC : 0 | BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| 15/30309731 DC : 0 | BS ISO 19396-1 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 1: PH ELECTRODES WITH GLASS MEMBRANE |
| BS EN 16383:2016 | Thermal insulation products for building applications. Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| ISO 29804:2009 | Thermal insulation products for building applications Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
| PREN 4594 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| I.S. EN ISO 3233-2:2014 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN 16074:2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| BS EN 15814 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| I.S. EN 15814:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| NF EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
| I.S. EN ISO 6504-3:2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS EN ISO 6504-3:2007 | Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| DIN EN ISO 7142:2007-05 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| UNE-EN ISO 4618:2015 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
| BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
| ISO 16000-11:2006 | Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| I.S. EN ISO 11909:2007 | BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
| I.S. EN ISO 4618:2014 | PAINTS AND VARNISHES - TERMS AND DEFINITIONS (ISO 4618:2014) |
| DIN ISO 6744-1:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 1: GENERAL METHOD OF TEST |
| I.S. EN 1504-5:2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 7142:2007 | BINDERS FOR PAINTS AND VARNISHES - EPOXY RESINS - GENERAL METHODS OF TEST |
| I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| I.S. EN ISO 7143:2007 | BINDERS FOR PAINTS AND VARNISHES - METHODS OF TEST FOR CHARACTERIZING WATER-BASED BINDERS |
| DIN EN 1504-3:2006-03 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| BS 3900-A10:1998 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
| BS 3900-D11(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS 2782-4.432B(2000) : 2000 | PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| DIN 53219:2009-08 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - METHOD BY DETERMINATION OF THE PRACTICAL DRY-FILM DENSITY |
| 13/30269216 DC : 0 | BS ISO 124 - LATEX, RUBBER - DETERMINATION OF TOTAL SOLIDS CONTENT |
| BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
| DIN 30674-3:2001-03 | SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING |
| BS EN ISO 3233-1:2013 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| 04/30109555 DC : DRAFT FEB 2004 | ISO 16000-11 - INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
| DIN EN ISO 3233-2:2014-10 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| BS EN ISO 23811:2009 | Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
| UNE-EN ISO 3233-3:2015 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/FDIS 3233-3:2014) |
| BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| UNE-EN 13381-5:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4594:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| UNI EN 4594 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN ISO 3233-1:2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| UNI EN 16074 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| UNI EN ISO 21809-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| I.S. EN ISO 23811:2009 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
| I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
| UNI EN ISO 3233-1 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN ISO 6504-3:2007 | Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
| I.S. EN 12068:1999 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| DIN EN ISO 7143:2007-05 | Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| BS EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels |
| ISO 6504-3:2006 | Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN ISO 6744-1:2004 | Binders for paints and varnishes. Alkyd resins General methods |
| BS EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair |
| ISO 3233-2:2014 | Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle |
| UNE-EN ISO 3233-1:2013 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
| UNE-EN ISO 3233-2:2014 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014) |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| DIN EN 1504-7:2006-11 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN ISO 4619:2010 | Driers for paints and varnishes (ISO 4619:1998) |
| EN 1504-5:2013 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection |
| EN ISO 16000-11:2006 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| UNI EN 1504-7 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNI EN 1504-5 : 2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| 13/30266799 DC : 0 | BS EN ISO 3233-3 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL |
| I.S. EN 13381-5:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| ISO 15741:2016 | Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| UNI EN ISO 23811 : 2009 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
| I.S. EN ISO 21809-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| 17/30358597 DC : 0 | BS EN ISO 4619 - DRIERS FOR PAINTS AND VARNISHES |
| BS EN ISO 3233-3:2015 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| UNE-ISO 124:2011 | Latex, rubber -- Determination of total solids content |
| BS EN 15060:2006 | Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use |
| 00/120623 DC : DRAFT FEB 2000 | ISO/CD 18280 - EPOXIDE RESINS - DEFINITIONS AND TEST METHODS |
| ISO 12000:2014 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
| BS ISO 12000:2014 | Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods |
| I.S. EN ISO 3233-3:2015 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO/FDIS 3233-3:2014) |
| BS 6782-8(1996) : 1996 AMD 10178 | BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR AMINO RESINS |
| BS 6782-9(1996) : 1996 AMD 10179 | BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR POLYISOCYANATE RESINS |
| 04/30114371 DC : DRAFT JUN 2004 | EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
| UNE-EN 15814:2011 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
| UNE-EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| ISO 4619:1998 | Driers for paints and varnishes |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| BS ISO 18280:2010 | Plastics. Epoxy resins. Test methods |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| ISO 12968:2010 | Thermal insulation products for building applications Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) |
| UNE-EN ISO 21809-1:2019 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018) |
| DIN EN ISO 11909:2007-05 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| DIN EN 1504-3:2015-08 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| DIN EN ISO 4618:2015-01 | Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014 |
| BS EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
| BS EN ISO 7143:2007 | Binders for Paints and varnishes. Methods of test for characterizing water-based binders |
| BS EN ISO 15880:2004 | Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 7142:2007 | Binders for paints and varnishes. Epoxy resins. General methods of test |
| BS EN 10339:2007 | Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection |
| ISO 11908:1996 | Binders for paints and varnishes — Amino resins — General methods of test |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| ISO 6744-1:1999 | Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
| UNE-EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| BS EN 1504-5:2013 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection |
| ISO 23811:2009 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| BS EN ISO 4618:2014 | Paints and varnishes. Terms and definitions |
| ISO 7142:2007 | Binders for paints and varnishes — Epoxy resins — General methods of test |
| UNE-EN ISO 4619:2011 | Driers for paints and varnishes (ISO 4619:1998) |
| EN ISO 11908:1998 | Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996) |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN ISO 15880:2004 | Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) |
| EN ISO 3233-2:2014 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014) |
| EN ISO 7142:2007 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| EN ISO 3233-1:2013 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
| EN 15814:2011+A2:2014 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| EN 15060:2006 | Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use |
| EN ISO 3233-3:2015 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015) |
| EN 4594:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance |
| EN 16383:2016 | Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN ISO 23811:2009 | Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009) |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
| EN ISO 6744-1:2004 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| EN 4588:2007 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| EN ISO 4618:2014 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| EN ISO 7143:2007 | Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
| EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| BS ISO 4619 : 1998 | DRIERS FOR PAINTS AND VARNISHES |
| BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 15/30320410 DC : 0 | BS EN 16383 - THERMAL INSULATION PRODUCTS FOR BUILDINGS APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
| 15/30309734 DC : 0 | BS ISO 19396-2 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 2: PH ELECTRODES WITH ISFET TECHNOLOGY |
| DIN EN 3840:2007-10 | Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007 |
| 01/122232 DC : DRAFT JUNE 2001 | BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS EN 13381-5:2014 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet steel composite member |
| 12/30215682 DC : 0 | BS EN ISO 3233-2 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: DETERMINATION BY MEASUREMENT OF THE DRY-FILM DENSITY |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| BS 6782-18(2001) : 2001 AMD 15243 | BINDERS FOR PAINTS - PART 18: GENERAL METHODS OF TEST FOR WATER-DILUTABLE BINDERS |
| DIN EN 15814:2015-03 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| BS ISO 19396-1:2017 | Paints and varnishes. Determination of pH value pH electrodes with glass membrane |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ISO 19396-2:2017 | Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology |
| DIN EN ISO 23811:2009-08 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
| PREN 1504-7 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
| BS ISO 124:2014 | Latex, rubber. Determination of total solids content |
| PREN 4595 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| 00/103366 DC : DRAFT APR 2000 | PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
| DIN 28054-1:2000-09 | CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING |
| DIN V 53216-1:1988-05 | DETERMINATION OF THE NON-VOLATILE MATTER CONTENT; METHOD AT ELEVATED TEMPERATURE FOR RESINS, RESIN SOLUTIONS, PAINTS, VARNISHES AND SIMILAR COATING MATERIALS |
| DIN EN 16074:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| ISO 19396-1:2017 | Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane |
| I.S. EN ISO 4619:2010 | DRIERS FOR PAINTS AND VARNISHES |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| ISO 29803:2010 | Thermal insulation products for building applications Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| 15/30327125 DC : 0 | BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
| DIN EN ISO 4619:2011-02 | DRIERS FOR PAINTS AND VARNISHES |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ISO 3233-1:2013 | Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
| ISO 124:2014 | Latex, rubber — Determination of total solids content |
| ASTM D 7143 : 2017 : REDLINE | Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ONORM EN ISO 3233-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ISO 18280:2010 | Plastics Epoxy resins Test methods |
| ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
| DIN EN 1504-7:2015-09 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
| DIN EN ISO 16000-11:2006-06 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| DIN EN ISO 6504-3:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| DIN EN 1504-5:2013-06 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| BS EN ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value |
| BS EN ISO 11908:1998 | Binders for paints and varnishes. Amino resins. General methods of test |
| BS EN ISO 16000-11:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| ISO 7143:2007 | Binders for paints and varnishes — Methods of test for characterizing water-based binders |
| EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| DIN EN ISO 6744-1:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN ISO 15880:2004-09 | Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) |
| DIN EN 10339:2007-05 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| ONORM EN ISO 11890-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| ONORM EN ISO 16000-11 : 2006 | INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
| ISO 124:2014 | Latex, rubber — Determination of total solids content |
| ISO 23811:2009 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 123:2001 | Rubber latex Sampling |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.