ISO 80079-36:2016
Current
The latest, up-to-date edition.
Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, English
09-03-2016
ISO 80079-36:2016 specifies the basic method and requirements for design, construction, testing and marking of non-electrical Ex equipment, Ex Components, protective systems, devices and assembliesof these products that have their own potential ignition sources and are intended for use in explosive atmospheres. Hand tools and manually operated equipment without energy storage are excluded from the scope of this standard. This standard does not address the safety of static autonomous process equipment when it is not part of equipment referred to in this standard. This standard does not specify requirements for safety, other than those directly related to the risk of ignition which may then lead to an explosion. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that equipment can be operated are:- temperature -20 C to 60 C;- pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and- air with normal oxygen content, typically 21 % v/v. Such atmospheres can also exist inside the equipment. In addition, the external atmosphere can be drawn inside the equipment by natural breathing produced as a result of fluctuations in the equipment's internal operating pressure, and/or temperature. This part of ISO/IEC 80079 specifies the requirements for the design and construction of equipment, intended for explosive atmospheres in conformity with all Equipment Protection Levels (EPLs) of Group I, II and III. This standard supplements and modifies the general requirements of IEC 60079-0, as shown in Table 1 in the Scope of the document. Keywords: mechanical explosion protected equipment
DevelopmentNote |
Supersedes ISO/DIS 80079-36. (03/2016) NEW CHILD COR 1 2019 IS NOW ADDED
|
DocumentType |
Standard
|
Pages |
156
|
ProductNote |
NEW CHILD COR 1 2019 IS NOW ADDED
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
DIN EN ISO 80079-36 E : 2016 | Identical |
NF EN ISO 80079-36 : 2016 | Identical |
NBN EN ISO 80079-36 : 2016 | Identical |
NEN-EN-ISO 80079-36:2016/C1:2020 | Identical |
NS EN ISO 80079-36 : 2016 | Identical |
I.S. EN ISO 80079-36:2016 | Identical |
PN EN ISO 80079-36 : 2016 | Identical |
SN EN ISO 80079-36:2016 | Identical |
UNI CEI EN ISO 80079-36 : 2016 | Identical |
SS-EN ISO 80079-36:2016 | Identical |
I.S. EN ISO 80079-36:2016&AC:2019 | Identical |
CEI UNI EN ISO 80079-36 : 1ED 2016 | Identical |
EN ISO 80079-36:2016 | Identical |
DIN EN ISO 80079-36:2016-12 | Identical |
ONORM EN ISO 80079-36 : 2016 | Identical |
UNE-EN ISO 80079-36:2017 | Identical |
PN-EN ISO 80079-36:2016-07/AC:2020-05 | Identical |
ÖNORM EN ISO 80079-36:2020 06 15 | Identical |
UNE-EN ISO 80079-36:2016 | Identical |
ISO 11148-13:2017 | Hand-held non-electric power tools Safety requirements Part 13: Fastener driving tools |
ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
BS EN 13160-1:2003 | Leak detection systems General principles |
EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
EN 13160-1:2016 | Leak detection systems - Part 1: General Principles |
EN ISO 80079-37:2016 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
I.S. EN 13616-2:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE |
BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
I.S. EN 13616-1:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
I.S. EN 13160-1:2016 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
VDI 2263 Blatt 6:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations |
UNE-EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
DIN EN ISO 80079-37 E : 2016 | EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016) |
BS EN ISO 80079-37:2016 | Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\' |
PREN 12941 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING |
I.S. EN ISO 80079-37:2016 | EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO/DIS 80079-37:2014) |
PREN 12942 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
DIN EN ISO/IEC 80079-38 E : 2017 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
DIN EN ISO 80079-37:2016-12 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016) |
PD IEC/TS 60079-46:2017 | Explosive atmospheres Equipment assemblies |
BS EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
17/30318779 DC : 0 | BS EN ISO 20321 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SAFETY OF MACHINERIES - POWERED ELEVATORS |
I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
UNE-EN ISO 80079-37:2018 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
ISO 80079-37:2016 | Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
UNE-EN 13160-1:2017 | Leak detection systems - Part 1: General Principles |
EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
UNE-EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device |
IEC TS 60079-46:2017 | Explosive atmospheres - Part 46: Equipment assemblies |
IEC 60079-0 REDLINE : 7.0 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
IEC 61025:2006 | Fault tree analysis (FTA) |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
ISO 6507-4:2005 | Metallic materials Vickers hardness test Part 4: Tables of hardness values |
IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
EN 15198:2007 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
ISO 80079-37:2016 | Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
ISO 16852:2016 | Flame arresters — Performance requirements, test methods and limits for use |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
IEC 60079-31:2013 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.