Skip to content
Please enter a keyword to search

  • ISO 8031:2009

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  01-07-2020

    Language(s):  English, French, Russian

    Published date:  05-10-2009

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 8031:2009 specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive, antistatic and non-conductive hoses and the electrical continuity or discontinuity between metal end fittings.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 8031. (10/2009)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS ISO 6805:1994 Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification
    12/30264538 DC : 0 BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    BS EN 60079-32-2:2015 Explosive atmospheres Electrostatics hazards. Tests
    10/30219414 DC : 0 BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
    12/30212874 DC : 0 BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION
    I.S. EN 13765:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    BS ISO 3861 : 1995 AMD 9705 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
    BS EN ISO 8331:2016 Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
    BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
    DIN EN 14593-1:2005-07 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
    UNE-EN 13765:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
    ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification
    ISO 12648:2006 Graphic technology Safety requirements for printing press systems
    BS ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels
    05/30139053 DC : DRAFT SEP 2005 ISO 8331 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE
    DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    PREN 13483 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    EN 13766:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
    ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service Specification
    I.S. EN 13766:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
    ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification
    EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
    ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels
    EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
    DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
    UNE-EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
    UNE-EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
    BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
    BS EN 1765:2004 Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
    BS EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam. Specification
    DIN EN 1361:1997-08 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    DIN EN ISO 6808:2000-11 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
    EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    ONORM EN 13617-2 : 2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
    EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
    EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
    UNE-EN 16643:2017 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
    07/30170472 DC : DRAFT AUG 2007 BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    12/30256960 DC : 0 BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    PD ISO/TR 17784:2003 Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
    06/30146125 DC : 0 EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    BS 5173-104.1(1991) : 1991 METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - ELECTRICAL TESTS - MEASUREMENT OF ELECTRICAL RESISTANCE OF HOSES AND HOSE ASSEMBLIES
    BIS IS 16210 : 2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE
    ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
    DD CEN/TS 14421:2006 Hose tail and ferrule for crimping and swaging
    07/30169625 DC : 0 BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
    15/30293925 DC : 0 BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION
    BS 6847:1987 Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids
    SAE ARP 6320 : 2018 PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF NON-VOLATILE PARTICULATE MATTER EMISSIONS FROM AIRCRAFT TURBINE ENGINES
    EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)
    16/30330752 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    DIN EN 1762:2016-09 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    ISO 8028:2017 Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification
    EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
    18/30363978 DC : 0 BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
    ISO 1823-2:1997 Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification
    DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
    DIN EN 13617-4:2012-05 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
    DIN EN 13482:2013-12 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    UNE-EN 1765:2017 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
    BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam — Specification
    BS EN ISO 3861:2008 Rubber hoses for sand and grit blasting. Specification
    UNE-EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
    I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    I.S. EN ISO 3861:2008 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    I.S. EN 13617-4:2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
    DIN EN 1361:2004-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
    DIN EN 14593-2:2005-07 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING
    EN ISO 3861:2008 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    I.S. EN ISO 14113:2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    I.S. EN ISO 6134:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
    I.S. EN 13617-2:2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
    I.S. EN 1360:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    I.S. EN 13482:2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    I.S. EN 1765:2016 RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
    I.S. EN ISO 6808:2014 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
    I.S. EN 14593-2:2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING
    I.S. EN ISO 8330:2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY (ISO 8330:2014)
    ONORM EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    BS 4089:1989 Specification for hoses and hose assemblies for liquefied petroleum gas
    UNI EN ISO 3861 : 2009 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    ONORM EN ISO 3861 : 2010 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
    PREN 13766 : DRAFT 2016 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    11/30246916 DC : DRAFT JULY 2011 BS EN ISO 8331 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE
    DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
    08/30187544 DC : DRAFT OCT 2008 BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    DIN EN 1360:2013-09 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    15/30317696 DC : 0 BS EN ISO 8331 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE
    15/30301522 DC : 0 BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS
    14/30293931 DC : 0 BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS
    ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification
    16/30334966 DC : 0 BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
    BS ISO 17165-1:2007 Hydraulic fluid power. Hose assemblies Dimensions and requirements
    BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
    14/30293928 DC : 0 BS ISO 13775-1 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 1: NON-FUEL APPLICATIONS
    BS 5173-104.2(1991) : LATEST METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - ELECTRICAL TESTS - MEASUREMENT OF ELECTRICAL CONTINUITY AND DISCONTINUITY OF HOSES AND HOSE ASSEMBLIES
    12/30238564 DC : 0 BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION
    BS EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
    ISO 17165-1:2007 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
    ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel
    ISO 12649:2004 Graphic technology Safety requirements for binding and finishing systems and equipment
    I.S. EN 16643:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION
    I.S. EN 60079-32-2:2015 EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
    ISO 1823-1:1997 Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification
    ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications
    I.S. EN 14594:2005 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING
    DIN EN 13617-2:2012-05 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
    DIN EN ISO 6808:2014-10 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
    DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
    DIN EN ISO 3861:2010-04 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
    DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
    BS EN 13617-4:2012 Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
    UNE-EN ISO 6808:2015 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014)
    BS EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies. Vocabulary
    UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
    ONORM EN 13766 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    UNI EN ISO 14113 : 2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
    UNI EN ISO 8330 : 2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY
    EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014)
    UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
    UNI EN 13482 : 2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    UNI EN 1360 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    UNI EN ISO 6808 : 2014 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION
    UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    BS EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
    BS ISO 8331 : 2007 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE
    I.S. EN ISO 8331:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE (ISO 8331:2016)
    DIN EN 14594:2005-07 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
    I.S. EN 1361:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    BS ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
    08/30188437 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    11/30250273 DC : 0 BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    10/30219408 DC : 0 BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
    13/30227963 DC : 0 BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION
    12/30264535 DC : 0 BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    BS EN 14594:2005 Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
    UNI ISO 17165-1 : 2012 HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
    08/30183539 DC : DRAFT JUNE 2008 BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
    BS ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service. Specification
    13/30284248 DC : 0 BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION
    BS ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use Non-fuel applications
    03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
    PREN 13617-2 : DRAFT 2010 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
    BS PD IEC TS 60079-32-1 : 2013 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
    BS ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels
    EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applications
    BS EN ISO 8028:2018 Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
    PREN 13482 : DRAFT 2012 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
    EN 14594:2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking
    DIN EN 13765:2015-05 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    ISO 6805:1994 Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification
    PREN 1762 : DRAFT 2018 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
    ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels
    I.S. CEN TS 14421:2006 HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING
    I.S. EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
    ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification
    I.S. EN ISO 1825:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017)
    BS EN 14593-1:2005 Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking
    BS EN 13765 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
    DIN EN ISO 6134:2015-10 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
    UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    BS EN 1361:2004 Rubber hoses and hose assemblies for aviation fuel handling. Specification
    BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
    BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    UNE-EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
    UNE-EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    UNE-EN 13482:2014 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
    ISO 3861:2005 Rubber hoses for sand and grit blasting Specification
    ISO 8331:2016 Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance
    ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
    ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
    BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
    BS EN 14593-2:2005 Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a half mask at positive pressure. Requirements, testing, marking
    09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
    BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
    UNI EN 13617-4 : 2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
    UNI EN 13617-2 : 2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
    EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    EN 16643:2016 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
    EN 28028 : 1993 RUBBER AND/OR PLASTICS HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION
    EN 1361 : 2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
    EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
    EN ISO 8331:2016 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016)
    EN 14593-2:2005 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking
    EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
    EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
    15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
    PREN 13617-4 : DRAFT 2010 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
    I.S. EN 12419:1999 RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING MARKING
    I.S. EN 14593-1:2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING
    ONORM EN 12115 : OCT 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    PREN 1360 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    13/30275849 DC : 0 BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    15/30317642 DC : 0 BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION
    BS ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
    ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification
    11/30250270 DC : 0 BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
    16/30302789 DC : DRAFT APR 2016 BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION
    BIS IS/ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    11/30240212 DC : 0 BS EN ISO 8330 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY
    15/30317663 DC : 0 BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION
    MIL-DTL-26521 Revision L:2014 Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings
    BS ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications
    BS ISO 12649:2004 Graphic technology. Safety requirements for binding and finishing systems and equipment
    BS ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
    I.S. EN 16820:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
    DIN EN 13766:2010-11 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
    UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    I.S. EN ISO 8028:2018 RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017)
    UNE-EN ISO 8331:2017 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016)
    ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification
    UNE-EN 16820:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    UNE-EN 13766:2011 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
    EN 14593-1:2018 Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking
    CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
    BS EN 13766:2010 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
    DIN EN 14594 E : 2005 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
    BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
    UNE-EN 60079-32-2:2016 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
    UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
    BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
    BS EN 13617-2:2012 Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
    BS EN ISO 14113:2013 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
    BS EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification
    BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery. Specification
    ONORM EN 13617-4 : 2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
    CEN/TS 14421 : 2006 HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING
    UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
    UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
    DIN EN ISO 6134:2006-02 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
    DIN EN 1762:2004-07 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
    DIN EN ISO 8330:2015-04 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
    EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
    UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
    ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
    ISO 2878:2017 Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective