ISO 898-5:2012
Current
Current
The latest, up-to-date edition.
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
Available format(s)
Hardcopy , PDF
Language(s)
French, English
Published date
30-05-2012
€94.00
Excluding VAT
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.
Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.
ISO 898-5:2012 is applicable to set screws and similar fasteners:
- made of carbon steel or alloy steel,
- having a triangular ISO metric screw thread according to ISO 68-1,
- with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,
- with diameter/pitch combinations according to ISO 261 and ISO 262, and
- having thread tolerances according to ISO 965-1 and ISO 965-2.
| Committee |
ISO/TC 2/SC 11
|
| DevelopmentNote |
Supersedes ISO/DIS 898-5. (06/2012)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST ISO 898-5 : 2014 | Identical |
| NBN EN ISO 898-5 : 2012 | Identical |
| NEN EN ISO 898-5 : 2012 | Identical |
| NS EN ISO 898-5 : 2012 | Identical |
| I.S. EN ISO 898-5:2012 | Identical |
| AS 4291.5:2015 | Identical |
| PN EN ISO 898-5 : 2012 | Identical |
| SS-EN ISO 898-5:2012 | Identical |
| IS 1367 : Part 5 : 2018 | Identical |
| BS EN ISO 898-5:2012 | Identical |
| EN ISO 898-5:2012 | Identical |
| NF EN ISO 898-5 : 2012 | Identical |
| DIN EN ISO 898-5:2012-09 | Identical |
| UNE-EN ISO 898-5:2013 | Identical |
| DIN ISO 898-5:1980-09 | Identical |
| BS 6104-3:1981 | Identical |
| BIS IS 1367-5 : 2002 | Identical |
| JIS B 1053:2014 | Identical |
| NFE 25 100 : 1985 | Similar to |
| SAC GB/T 3098-3 : 1982 | Identical |
| SAC GB/T 3098.3 : 2000 | Identical |
| GOST R ISO 898-5 : 2009 | Identical |
| DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
| DIN ISO 2936:2016-10 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS (ISO 2936:2014) |
| BS ISO 2936:1995 | Assembly tools for screws and nuts. Hexagon socket screw keys |
| ISO 2936:2014 | Assembly tools for screws and nuts — Hexagon socket screw keys |
| NF EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003 |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| DIN EN 24035:1992-02 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| BS 4168-3:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cone point |
| BS 4168-5:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cup point |
| BS 4168-2:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with flat point |
| BS 4168-4:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with dog point |
| I.S. EN 24035:1992 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| 09/30208236 DC : 0 | BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| PREN ISO 4766 : DRAFT 2009 | SLOTTED SET SCREWS WITH FLAT POINT |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| EN ISO 3269:2000 | Fasteners - Acceptance inspection (ISO 3269:2000) |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| BS EN ISO 2342:2003 | Slotted headless screws with shank |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| ISO 2342:2003 | Slotted headless screws with shank |
| ISO 4766:2011 | Slotted set screws with flat point |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| ISO 4027:2003 | Hexagon socket set screws with cone point |
| DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003 |
| DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003 |
| EN 24035 : 1991 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN ISO 4766:2011 | Slotted set screws with flat point (ISO 4766:2011) |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN ISO 2342:2003 | Slotted headless screws with shank (ISO 2342:2003) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN ISO 4028:2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| BS EN ISO 4766:2011 | Slotted set screws with flat point |
| 08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| 06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
| I.S. EN ISO 4766:2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress |
| BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
| DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003 |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| ONORM EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| UNE-EN ISO 4766:2012 | Slotted set screws with flat point (ISO 4766:2011) |
| ONORM EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT (ISO 4766:2011) |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 225:2010 | Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 965-3:1998 | ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.