MIL-STD-186 Revision F:2002
Current
Current
The latest, up-to-date edition.
PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
Available format(s)
PDF
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Gives minimum requirements for procedures, materials, and systems for plating, cleaning, painting and finishing metals, wood electronic materials, parts and assemblies for guided missiles, rockets and components to protect them.
| Committee |
AREA MFFP
|
| DevelopmentNote |
F NOTICE 1 - Notice of Cancellation without Replacement. (07/2017) F NOTICE 2 - Notice of Reinstatement. (08/2017) NEW CHILD NOT 3 2022 IS ADDED
|
| DocumentType |
Standard
|
| Pages |
89
|
| ProductNote |
NEW CHILD NOT 3 2022 IS ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL A 52512 : A NOTICE 1 | AIR CONDITIONERS: VERTICAL, COMPACT 6,000 BTU/HR |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-HDBK-1250 Revision A:1995 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| MIL-T-37096 Base Document:1975 | TEST KIT, SYPHILIS DETECTION |
| MIL-E-11991 Revision E:1983 | ELECTRONIC, ELECTRICAL, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL SPECIFICATION FOR |
| IPC HDBK 630 : 0 | GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
| SAE AS12500 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies |
| MIL-STD-1512 Base Document:1972 | ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AMSQQA250/8C | Aluminum Alloy 5052, Plate and Sheet |
| MIL-M-24041 Revision C:1981 | MOLDING AND POTTING COMPOUND |
| MMM-A-121 Base Document:1966 | ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| ASTM B 85 : 2003 | Standard Specification for Aluminum-Alloy Die Castings |
| SAE AMSQQA225/9A | Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
| ASTM B 80 : 2015 : REDLINE | Standard Specification for Magnesium-Alloy Sand Castings |
| A-A-53884 Revision A:1992 | GOLD ALLOY, CASTING, DENTAL |
| SAE AMSQQA250/12A | Aluminum Alloy 7075, Plate and Sheet |
| TT-W-572 Revision B:1969 | WOOD PRESERVATIVE: WATER-REPELLANT |
| SAE AMS 2422 : 2014 | PLATING, GOLD |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| MIL-PRF-8116D:2014 | PUTTY, GENERAL PURPOSE, NON-HARDENING |
| DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
| ASTM D 3955 : 2013 : REDLINE | Standard Specification for Electrical Insulating Varnishes |
| ASTM D 295 : 2012 | Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation (Withdrawn 2020) |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| ASTM B 19 : 2015 : REDLINE | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
| MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
| SAE AMS5569B | Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C max Cold Drawn, 1/8 Hard Temper |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| SAE AMS QQ A 200/3 : 1997 | ALUMINUM ALLOY 2024, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
| SAE AMSQQC320 | Chromium Plating (Electrodeposited) |
| A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
| ASTM B 91 : 2017 : REDLINE | Standard Specification for Magnesium-Alloy Forgings |
| MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
| NFPA 34 : 2015 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| ASTM A 929/A929M : 2017-03 | SPECIFICATION FOR STEEL SHEET, METALLIC-COATED BY THE HOT-DIP PROCESS FOR CORRUGATED STEEL PIPE |
| SAE AMS 5365 : 2013 | CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 24CR - 20.5NI, SOLUTION HEAT TREATED |
| ASTM A 204/A204M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
| SAE AMS5366E | Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast |
| SAE J452_200312 | General Information—Chemical Compositions, Mechanical and Physical Properties of SAE Aluminum Casting Alloys |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| A-A-59146 Revision B:2014 | CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
| MIL-P-18317 Base Document:1954 | PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| SAE AMS2770M | Heat Treatment of Wrought Aluminum Alloy Parts |
| MIL-PRF-3150 Revision E:2008 | LUBRICATING OIL, PRESERVATIVE, MEDIUM |
| SAE AMS4376H | Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H26) Cold Rolled and Partially Annealed |
| SAE AMS5571J | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated |
| SAE AMST8506B | Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| AWS C3.5 : 1999 | SPECIFICATION FOR INDUCTION BRAZING |
| SAE AMSQQA250/4B | Aluminum Alloy 2024, Plate and Sheet |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| SAE AMS QQ A 250/13 : 1997 | ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET |
| SAE AMSQQA200/8A | Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded A96061 |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| SAE AMSQQA225/2 | Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003 |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| SAE AMSQQA250/1 | Aluminum 1100, Plate and Sheet |
| ASTM A 623 : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements |
| SAE AMSQQA225/1B | Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 1100 |
| ASTM A 693 : 2016 : REDLINE | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SAE AMS5564C | Steel, Corrosion Resistant, Tubing 19CR - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper |
| SAE AMSQQA225/4A | Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished |
| SAE AMSQQA250/2 | Aluminum Alloy 3003, Plate and Sheet |
| SAE AMSQQA200/2B | Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| SAE AMS2418J | Plating, Copper |
| SAE AMS5563C | Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, ¼ Hard Temper |
| SAE AMSQQA250/11 | Aluminum Alloy 6061, Plate and Sheet |
| SAE AMSQQA250/15C | Aluminum Alloy Alclad 7178, Plate and Sheet |
| MIL-C-24723 Base Document:1989 | CASTINGS, NICKEL-COPPER ALLOY |
| SAE AMS2434D | Plating, Tin-Zinc Alloy |
| ASTM B 124 : 2008 | SPECIFICATION FOR COPPER AND COPPER ALLOY FORGING ROD, BAR AND SHAPES |
| SAE AMS4860F | Manganese Bronze, Sand and Centrifugal Castings 58Cu – 39Zn – 1.2Fe – 1.0Al – 0.80Mn As Cast |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| SAE AMSQQA225/3 | Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 2011 |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| ASTM B 69 : 2016 : REDLINE | Standard Specification for Rolled Zinc |
| MIL C 20218 : P | CHROMIUM PLATING, ELECTRODEPOSITED, POROUS |
| ASTM D 1732 : 2003 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| SAE AMS5566M | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) High Pressure, Cold Drawn |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| SAE AMS A 25463 : 2013 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| AWS C3.4 : 1999 | SPECIFICATION FOR TORCH BRAZING |
| SAE AMSQQA200/11A | Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| SAE AMS5567F | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| MIL-DTL-14538 Revision D:1999 | CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
| ASTM A 586 : 2004 : REV A | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| A-A-59298 Revision B:2013 | Tape, Pressure-Sensitive Adhesive |
| SAE AMSS13165A | Shot Peening of Metal Parts |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| SAE AMS C 81562 : 1998 | COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
| ASTM B 679 : 1998 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
| QQ-L-171 Revision E:1966 | LEAD PIG |
| SAE AMSS4383B | Sealing Compound, Topcoat, Fuel Tank Buna-N Type |
| MIL-C-8514 Revision C:1967 | COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
| SAE AMS2772G | Heat Treatment of Aluminum Alloy Raw Materials |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL-STD-276 Revision A:1992 | IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
| A-A-208 Revision C:2012 | INK, MARKING, STENCIL, OPAQUE, (POROUS AND NON-POROUS SURFACES) |
| MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
| SAE AMSQQA250/5B | Aluminum Alloy Alclad 2024, Plate and Sheet |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS5570Q | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS4375L | Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| AWS C3.6 : 1999 | SPECIFICATION FOR FURNACE BRAZING |
| A-A-56032 Revision D:2003 | INK, MARKING, EPOXY BASE |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| ASTM B 30 : 2016 : REDLINE | Standard Specification for Copper Alloys in Ingot Form |
| MIL C 85054 : B | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, CLEAR (AMLGUARD) |
| QQ-B-639 Revision C:2016 | BRASS, NAVAL: FLAT PRODUCTS |
| MIL G 10924 : F | GREASE, AUTOMOTIVE AND ARTILLERY |
| QQ-T-201 Revision F:1986 | Terneplate, for Roofing and Roofing Products |
| AWS C3.7 : 1999 | SPECIFICATION FOR ALUMINUM BRAZING |
| SAE AMS4291J | Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast |
| ASTM B 199 : 2017 : REDLINE | Standard Specification for Magnesium-Alloy Permanent Mold Castings |
| SAE AMSA8576A | Adhesive, Acrylic Base, for Acrylic Plastic |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| SAE AMS4842E | Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast |
| CCC-D-950 Revision F:1989 | DYEING AND AFTER TREATING PROCESSES FOR COTTON CLOTHS |
| ASTM B 107/B107M : 2013 : REDLINE | Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire |
| SAE AMS4290M | Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast |
| SAE AMS QQ A 225/8 : 1998 | ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| MIL-HDBK-1587 Base Document:1996 | MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEM |
| SAE AMSP81728B | Plating, Tin-Lead (Electrodeposited) |
| MIL C 26074 : E | COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
| SAE AMSC8837A | Coating, Cadmium (Vacuum Deposited) |
| SAE AMSQQA200/1 | Aluminum Alloy 3003, Bar, Rod, Shapes, Tube, and Wire, Extruded |
| SAE AMS QQ A 200 : 2004 | ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
| A-A-52408 Base Document:1993 | Preservative Coating, Rubber: for Rubber Surfaces |
| MIL-HDBK-691 Revision B:1987 | Adhesive Bonding |
| MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
| ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| SAE AMSQQA225/6A | Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
| MIL-I-16923 Revision H:1991 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY |
| MIL A-A-59282 : 1998 | CHEMICALS, ANALYTICAL; GENERAL SPECIFICATION FOR |
| A-A-59166 Revision A:2014 | COATING COMPOUND, NONSLIP (FOR WALKWAYS) |
| ASTM B 661 : 2012 : REDLINE | Standard Practice for Heat Treatment of Magnesium Alloys |
| SAE AMSQQA225/5 | Aluminum Alloy, 2017, Bar, Rod, and Wire Rolled, Drawn, or Cold Finished |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-HDBK-1250 Revision A:1995 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| MIL B 15382 : C | BOLT, FIREBRICK ANCHOR |
| MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| SAE AMSQQA250/3A | Aluminum Alloy Alclad 2014, Plate and Sheet |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| SAE AMSQQA225/7 | Aluminum Alloy 5052, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
| SAE AMS M 3171 : 1998 | MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON |
| A-A-53475 Base Document:1988 | PLATINUM FOIL (1 PENNYWEIGHT) |
| SAE AMS5565L | Steel, Corrosion Resistant, Welded Tubing 19Cr - 9.5Ni (304) Solution Heat Treated |
| QQ-C-40 Base Document:1963 | CALKING, LEAD WOOL AND LEAD PIG |
| ASTM A 302/A302M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM B 122/B122M : 2016 : REDLINE | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS5560N | Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.