PREN 50502 : DRAFT 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
Superseded date
01-08-2015
Superseded by
Published date
23-10-2013
Sorry this product is not available in your region.
Foreword
1 General
2 Trolleybus construction
3 Checks and tests
Annex A (normative) - Constructional detailed provisions
Annex B (normative) - Trolleybuses - Connection system to overhead
contact lines
Annex C (normative) - Constructional hints for connection systems
Specifies the requirements and constructional hints, especially to avoid danger of electrical kind to the public and to the personnel.
| Committee |
SC 9XB
|
| DocumentType |
Draft
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 50502 : 2015 | Identical |
| NF EN 50502 : 2016 | Identical |
| DIN EN 50502:2016-03 | Identical |
| 13/30252783 DC : 0 | Identical |
| VDE 0115-502:2016-03 | Identical |
| EN 60446:2007 | Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or alphanumerics |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| EN 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| ISO 6469-2:2009 | Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures |
| IEC 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
| ISO 23273-1:2006 | Fuel cell road vehicles Safety specifications Part 1: Vehicle functional safety |
| ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC TS 60479-1:2005+AMD1:2016 CSV | Effects of current on human beings and livestock - Part 1: Generalaspects |
| EN 60349-1:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| ISO 16750-5:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
| IEC 60322:2001 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 61377-1:2006/corrigendum:2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
| ISO 10099:2001 | Pneumatic fluid power — Cylinders — Final examination and acceptance criteria |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| EN 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| IEC 61000-3-12:2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
| EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
| IEC 61111:2009 | Live working - Electrical insulating matting |
| ISO 23273-3:2006 | Fuel cell road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| EN 62576:2010 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
| IEC 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| EN 60112 : 2003 AMD 1 2009 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 50178:1997 | Electronic equipment for use in power installations |
| IEC 60349-2:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
| IEC 62576:2009 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
| EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| ISO 16750-3:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
| EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| EN 50110-1:2013 | Operation of electrical installations - Part 1: General requirements |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 50129 : 2003 COR 2010 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| EN 60617-2 : 1996 | GRAPHICAL SYMBOLS FOR DIAGRAMS - SYMBOL ELEMENTS. QUALIFYING SYMBOLS AND OTHER SYMBOLS HAVING GENERAL APPLICATION |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 61000-3-12:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011) |
| ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 50355:2013 | Railway applications - Railway rolling stock cables having special fire performance - Guide to use |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
| EN 60322:2001 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| EN 50110-2:2010 | Operation of electrical installations - Part 2: National annexes |
| IEC 61377-1:2006 | Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
| EN 50126 : 1999 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| EN 50272-3 : 2002 COR 2003 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES |
| IEC 60617-2:1996 | Graphical symbols for diagrams - Partie 2: Symbol elements, qualifying symbols and other symbols having general application |
| IEC 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.