UNE-EN 60076-1:2013
Current
Current
The latest, up-to-date edition.
Power transformers - Part 1: General
Available format(s)
Hardcopy , PDF
Published date
23-12-2013
Publisher
€151.20
Excluding VAT
| Committee |
CTN 207/SC 14
|
| DevelopmentNote |
Supersedes UNE 20101-1 and UNE 20101-4. (08/2003)
|
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
Asociación Española de Normalización
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 60076-1:2011 | Identical |
| DIN EN 60076-1 : 2012 | Identical |
| NF EN 60076-1 : 2012 | Identical |
| I.S. EN 60076-1:2011 | Identical |
| IEC 60076-1:2011 | Identical |
| NBN EN 60076-1 : 2011 | Identical |
| EN 60076-1:2011 | Identical |
| IEC 60076-15:2015 | Power transformers - Part 15: Gas-filled power transformers |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| EN 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
| IEC TR 60616:1978 | Terminal and tapping markings for power transformers |
| EN 60076-5:2006 | Power transformers - Part 5: Ability to withstand short-circuit |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| EN 60076-11:2004 | Power transformers - Part 11: Dry-type transformers |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| ISO 3:1973 | Preferred numbers — Series of preferred numbers |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEC 60068-3-3:1991 | Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments |
| IEC 60076-4:1976 | Power transformers - Part 4: Tappings and connections |
| IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEC 60076-12:2008 | Power transformers - Part 12: Loading guide for dry-type power transformers |
| EN 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC 60050-421:1990 | International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| IEC 60076-6:2007 | Power transformers - Part 6: Reactors |
| IEC 62032:2012 | Guide for the Application, Specification and Testing of Phase-Shifting Transformers |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| IEEE C57.142 : 2010 | GUIDE TO DESCRIBE THE OCCURRENCE AND MITIGATION OF SWITCHING TRANSIENTS INDUCED BY TRANSFORMERS, SWITCHING DEVICE, AND SYSTEM INTERACTION |
| IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method |
| IEC 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| IEC TS 60076-14:2009 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
| IEC 60076-13:2006 | Power transformers - Part 13: Self-protected liquid-filled transformers |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
| EN 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| EN 60721-3-4:1995/A1:1997 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS |
| IEC 60076-10-1:2016 | Power transformers - Part 10-1: Determination of sound levels - Application guide |
| IEC 60076-16:2011 | Power transformers - Part 16: Transformers for wind turbine applications |
| IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
| IEC 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.