|
NFPA 654 : 2017
|
PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
|
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
|
API 670 : 2014
|
MACHINERY PROTECTION SYSTEMS |
|
EN ISO 13631:2002
|
Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
|
A-A-50304 Base Document:1987
|
DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY |
|
MIL-PRF-32098 Revision A:2004
|
ULTRAFILTRATION SYSTEM, 10-GALLON PER MINUTE OILY WASTE MEMBRANE (OWMS-10) |
|
ASME A17.1 : 2016
|
SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
|
MIL-PRF-30099 Revision A:2011
|
TREATMENT SYSTEM, BLACKWATER AND COMBINED BLACKWATER/GRAYWATER, FOR SURFACE SHIPS |
|
MIL-PRF-53051 Revision C:2017
|
PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE |
|
MIL-PRF-32007 Base Document:2003
|
OILY WASTEWATER SEPARATION SYSTEM, 6.7-GALLON PER MINUTE NAVY INTEGRATED MEMBRANE SYSTEM (NIMS) |
|
IEEE 1585 : 2002
|
FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS |
|
ANSI/AWWA D107-16 ERR 1(CSV)
|
COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
|
AWWA C542 : 2016
|
ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES |
|
API 616 : 2011
|
GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
API 619 : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
EN 62026-3:2015
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
|
API 672 : 2004
|
PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
API 613:2003
|
SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
MIL-PRF-32236 Base Document:2007
|
GENERATOR, CHLORINE PORTABLE ELECTROLYTIC (PECG) |
|
API 677 : 2006 : R2010
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
IEEE 241 : 1990
|
ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
|
API 677 :2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
AWWA C670 : 2015
|
ONLINE CHLORINE ANALYZER OPERATION AND MAINTENANCE |
|
API 611 : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
BS EN 62040-1 : 2008
|
UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
|
API 14FZ : 2013
|
RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
|
SAE ARP 1804 : 2017
|
ELECTRIC BAGGAGE/CARGO TRACTOR |
|
A-A-59472 Base Document:1999
|
TUMBLER, DRYING, LAUNDRY (NAVAL SUBMARINE) |
|
A-A-59469 Base Document:1999
|
Washer-Extractor, Laundry, 35 to 200 Pound Capacity (Naval Shipboard) |
|
API 682 : 2014
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
|
API 677 : 2006 : R2016
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
API 682 CHINESE : 2014
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
|
API 14F : 2008 : R2013
|
DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
|
AWWA F110 : 2016
|
ULTRAVIOLET DISINFECTION SYSTEMS FOR DRINKING WATER |
|
A-A-59713 Revision A:2004
|
COMBINATION OVEN, ELECTRIC |
|
MIL-PRF-32017 Base Document:1997
|
REFRIGERATION SYSTEM, ADVANCED DESIGN |
|
A-A-59393 Base Document:2000
|
MILLING MACHINE, VERTICAL MULTISPINDLE, DOUBLE COLUMN, COMPUTER NUMERICAL CONTROL (CNC) |
|
ASHRAE GUIDELINE 13 : 2014
|
SPECIFYING BUILDING AUTOMATION SYSTEMS |
|
IEEE/ANSI N42.38-2015
|
American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security |
|
A-A-59188 Base Document:1998
|
Refrigerator, Mechanical, Storage Stand (for Bulk Milk Dispensers) (Naval Shipboard) |
|
ASHRAE 90.4 : 2016
|
ENERGY STANDARD FOR DATA CENTERS |
|
EN 62040-1:2008/A1:2013
|
UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013) |
|
MIL-DTL-2036 Revision E:2014
|
ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD |
|
API 551 : 2016
|
PROCESS MEASUREMENT |
|
MIL-PRF-32167 Revision A:2006
|
TRANSIENT VOLTAGE SURGE SUPPRESSOR (TVSS) |
|
EN ISO 21049:2004
|
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
|
IEEE C93.4-2012
|
IEEE Standard for Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines |
|
A-A-59471 Base Document:1999
|
Dry Cleaning Presses and Finishing Equipment (Naval Shipboard) |
|
API 611 : 2008 : R2014
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
MIL-PRF-43891 Revision C:1997
|
REFRIGERATION UNITS, ELECTRIC, 9000 BTU FOR MILITARY VAN CONTAINER, REFRIGERATED, INSULATED |
|
API 673 : 2014
|
CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
NFPA 79 : 2018
|
ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
|
EN ISO 10438-1:2007
|
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
|
API 614 : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
|
API 14F:2008
|
DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
|
EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
|
MIL-PRF-32335 Base Document:2010
|
TRICON REFRIGERATED CONTAINER SYSTEM (TRCS) |
|
UNI EN ISO 23553-1 : 2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
|
A-A-59187 Base Document:1998
|
RANGE, CONVECTION OVEN, ELECTRIC, MODULAR (NAVAL SHIPBOARD) |
|
EN ISO 10440-1:2007
|
Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
|
A-A-59186 Base Document:1998
|
WELL, HOT FOOD STORAGE, ELECTRIC (NAVAL SHIPBOARD) |
|
MIL-M-29190 Revision A:1986
|
MONITORING DEVICES, EMISSION, STACK RELATED |
|
A-A-59777 Revision A:2009
|
DRY FILTER UNIT |
|
ASTM F 1837M : 1997 : R2002
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
ASTM F 1837M : 1997 : R2007
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
NEMA ICS 7 : 2014
|
INDUSTRIAL CONTROL AND SYSTEMS: ADJUSTABLE - SPEED DRIVES |
|
NEMA ICS 4:2015
|
Application Guideline for Terminal Blocks |
|
ASTM E 2513 : 2007 : R2012
|
Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
|
NEMA ICS 20:2009 (R2015)
|
Informational Guide to Electrical Industrial Topics |
|
UFC 3-430-11 : 2001
|
UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS |
|
ASTM F 2363/F2363M : 2017 : REDLINE
|
Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
|
ISO 13631:2002
|
Petroleum and natural gas industries Packaged reciprocating gas compressors |
|
NEMA KS 3:2010
|
Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications |
|
PD IEC/TR 61439-0:2013
|
Low-voltage switchgear and controlgear assemblies Guidance to specifying assemblies |
|
ANSI C12.7-2014
|
American National Standard for Requirements for Watthour Meter Sockets |
|
NEMA ICS 61800-2:2005
|
Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems |
|
B354.9-17
|
Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs) |
|
NEMA SM 24-1991 (R1997, R2002)
|
LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
|
NEMA PB 1:2011
|
Panelboards |
|
NEMA KS 1:2013
|
Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum) |
|
NEMA ICS 18:2001 (R2007)
|
INDUSTRIAL CONTROL AND SYSTEMS: MOTOR CONTROL CENTERS |
|
IEEE 1623-2004
|
IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation |
|
ISO 21049:2004
|
Pumps Shaft sealing systems for centrifugal and rotary pumps |
|
ASTM F 2072 : 2014 : REDLINE
|
Standard Test Method for Hosedown of a Membrane Switch |
|
ASTM F 1837M : 1997
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
C9-17
|
Dry-type transformers |
|
ASTM F 1895 : 2014 : REDLINE
|
Standard Test Method for Submersion of a Membrane Switch |
|
NEMA ICS 3:2005 (R2010)
|
INDUSTRIAL CONTROL AND SYSTEMS: MEDIUM VOLTAGE CONTROLLERS RATED 2001 TO 7200 VOLTS AC |
|
ASTM E 2484 : 2008
|
Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices |
|
IEEE C37.21-2005
|
IEEE Standard for Control Switchboards |
|
API 552 : 1994
|
TRANSMISSION SYSTEMS |
|
ANSI C93.4 : 2012
|
REQUIREMENTS FOR LINE TUNING UNITS |
|
ASTM E 3137/E3137M : 2017
|
Standard Specification for Heat Meter Instrumentation |
|
NEMA ST 20:2014
|
Dry Type Transformers for General Applications |
|
IEC TR 61439-0:2013
|
Low-voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying assemblies |
|
NEMA ICS 7.2 : 2015
|
APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS |
|
ASTM E 2513 : 2007
|
Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
|
ASTM F 1837M : 1997 : R2012 : EDT 1
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
NEMA ICS 3.1 : 2009(R2014)
|
GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS |
|
DIN EN ISO 23553-1:2014-09
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
|
ASTM C 1217 : 2000
|
Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
|
ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
|
UNE-EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
|
NEMA 280 : 1990
|
APPLICATION GUIDE FOR GROUND FAULT CIRCUIT INTERRUPTERS |
|
IEC 62026-3:2014
|
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
|
IEEE 515.1-2012
|
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
|
ANSI/NEMA KS 2:2013
|
Distribution Equipment Switch Application Guide, A User\'s Reference |
|
ASME A17.1-2016/CSA B44-16
|
Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
|
NEMA ICS 6-1993 (R2006)
|
Industrial Control and Systems: Enclosures |
|
ISO/IEC TR 24729-3:2009
|
Information technology Radio frequency identification for item management Implementation guidelines Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications |
|
CSA ISO/IEC TR 24729-3:14 (R2019)
|
Information technology - Radio frequency identification for item management - Implementation guidelines - Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications (Adopted ISO/IEC TR 24729-3:2009, first edition, 2009-05-15) |
|
FM 3615 : 2018
|
EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS |
|
BS EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
|
NEMA ICS 1.3:1986 (R2001, R2009, R2015)
|
Preventive Maintenance of Industrial Control and Systems Equipment |
|
NEMA ICS 14:2015
|
Application Guide for Electric Fire Pump Controllers |
|
NEMA PB 2:2011
|
Deadfront Distribution Switchboards |
|
ASTM E 2484 : 2008 : R2015
|
Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024) |
|
NEMA ICS 9 : 1993
|
INDUSTRIAL CONTROL AND SYSTEMS: POWER CIRCUIT ACCESSORIES |
|
NEMA ICS 16:2001
|
Motion/Position Control Motors, Controls and Feedback Devices |
|
BS EN 62026-3:2015
|
Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet |
|
ANSI C136.40:2014
|
American National Standard for Roadway and Area Lighting Equipment—Solar Lighting Systems |
|
ASTM C 1217 : 2000 : R2006
|
Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
|
BS EN ISO 21049:2004
|
Pumps. Shaft sealing systems for centrifugal and rotary pumps |
|
NEMA ICS 61800-1:2002(R2007)
|
Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems |
|
BS EN ISO 10438-1:2003
|
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
|
B354.12-17
|
Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs) |
|
BS EN ISO 13631:2002
|
Petroleum and natural gas industries. Packaged reciprocating gas compressors |
|
ISO 23551-1:2012
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
|
UFC 4-211-01 : Change 1
|
UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
|
ISO 10440-1:2007
|
Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
|
NEMA PR 4 : 83(R1989)
|
PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE |
|
ISO 10438-1:2007
|
Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
|
ANSI/NEMA FB 11-2000
|
PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS |
|
ASTM C 1217 : 2000 : R2012
|
Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
|
ANSI/NEMA AB 3:2013
|
Molded-Case Circuit Breakers and Their Application |
|
BS EN ISO 10440-1:2001
|
Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
|
NEMA AB 1
|
Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures |
|
IEEE 1653.1-2016
|
IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output |
|
IEEE 1909.1-2014
|
IEEE Recommended Practice for Smart Grid Communications Equipment -- Test Methods and Installation Requirements |
|
API 619 REDLINE : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
IEEE 1827-2016
|
IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
|
IEEE C37.016-2006
|
IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV |
|
API 616 REDLINE : 2011
|
GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
IEEE 2030.2-2015
|
IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
|
ASME HST 4M : 1991
|
PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS |
|
API 14F REDLINE : 2008
|
DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
|
IEEE/ANSI N42.43-2006
|
American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security |
|
IEEE 3001.11-2017
|
IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems |
|
IEEE 1818-2017
|
IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations |
|
IEEE/ANSI N42.35-2006
|
American National Standard Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security |
|
API 611 REDLINE : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
IEEE C57.148-2011
|
IEEE Standard for Control Cabinets for Power Transformers |