ISO 1514:2016
|
Paints and varnishes — Standard panels for testing |
ISO 7724-1:1984
|
Paints and varnishes Colorimetry Part 1: Principles |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
EN 605 : 1992
|
PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 2898-2:2008
|
Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN 598:2007+A1:2009
|
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
ISO 7724-2:1984
|
Paints and varnishes Colorimetry Part 2: Colour measurement |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size) |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 45011 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
ISO/IEC 17011:2004
|
Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
EN 10088-5:2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 476:2011
|
General requirements for components used in drains and sewers |
ISO 7724-3:1984
|
Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
EN 1366-3:2009
|
Fire resistance tests for service installations - Part 3: Penetration seals |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 14366:2004
|
Laboratory measurement of noise from waste water installations |
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 185:2005
|
Grey cast irons Classification |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |