EN 60862-1:2015
|
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification |
EN 62604-2:2012
|
Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use |
IEC 60749-28:2017
|
Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level |
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance |
EN 61019-1 : 2005
|
Surface acoustic wave (SAW) resonators - Part 1: Generic specification |
IEC 60068-2-58:2015+AMD1:2017 CSV
|
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance |
EN 60068-2-64:2008
|
ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
EN 61000-4-2:2009
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61019-1:2004
|
Surface acoustic wave (SAW) resonators - Part 1: Generic specification |
EN 60068-2-7:1993
|
Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
IEC 60068-2-31:2008
|
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
IEC 60068-2-64:2008
|
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 62761:2014
|
Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) |
IEC 60862-1:2015
|
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification |
EN 61340-3-2:2007
|
Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms |
EN 60068-2-17:1994
|
Environmental testing - Part 2: Tests - Test Q: Sealing |
IEC 60068-2-17:1994
|
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
IEC 60068-2-10:2005
|
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
IEC 60862-2:2012
|
Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
EN 61340-3-1:2007
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
IEC 61340-3-1:2006
|
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
IEC 61340-3-2:2006
|
Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms |
IEC 62047-7:2011
|
Semiconductor devices - Micro-electromechanical devices - Part 7: MEMS BAW filter and duplexer for radio frequency control and selection |
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-13:1999
|
Environmental testing - Part 2: Tests - Test M: Low air pressure |
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 60050-561:2014
|
International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection |
IEC 60122-1:2002
|
Quartz crystal units of assessed quality - Part 1: Generic specification |
EN 60862-2:2012
|
Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use |
EN 62761:2014
|
Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) |
EN 62047-7 : 2011
|
SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 7: MEMS BAW FILTER AND DUPLEXER FOR RADIO FREQUENCY CONTROL AND SELECTION |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
IEC 62604-2:2011
|
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guideline for the use |
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
IEC 60695-11-5:2016
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-45:1992/A1:1993
|
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60068-2-52:2017
|
Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
EN 60068-2-31:2008
|
ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |