AS 3147-1992
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Approval and test specification - Electric cables - Thermoplastic insulated - For working voltages up to and including 0.6/1 kV
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
21-12-1992
Specifies construction, dimensions and tests for cables insulated with thermoplastic materials (including PVC) intended for use in electrical installations at working voltages up to and including 0.6/1 kV. It does not apply to specialized thermoplastic insulated cables for which there are separate Australian standards.
Committee |
EL-003
|
DocumentType |
Standard
|
ISBN |
0 7262 7909 9
|
Pages |
31
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard specifies construction, dimensions and tests for cables insulated with thermoplastic material (including PVC) intended for use in electrical installations at working voltages up to and including 0.6/1 kV. Also included are flexible cables with conductors in the range 6 mm2up to and including 25 mm2. Except where otherwise specified in tables of construction and dimensions, cables covered by this Standard are suitable for use as underground cables. It does not apply to specialized thermoplastic insulated cables for which there are separate Australian Standards, e.g. flexible lift control cables, neutral screened cables, welding cables, ships cables, flexible cords and the like.NOTES:Purchasing guidelines are contained in Appendix A.In addition to providing detailed requirements for cables of the types and sizes in the tables of construction and dimensions, this Standard provides the basis of requirements for other types and sizes in the range of materials covered by this Standard.For flexible cables above 25 mm2refer to other Standards, e.g. AS 3116 or AS 1995.
First published as part of AS C147-1950.
Second edition 1955.
Third edition 1967.
Fourth edition 1969.
AS C189 first published 1971.
Fifth edition AS C147-1972.
AS C189-1971 and part of AS C147-1972 revised, amalgamated and redesignated AS 3147-1974.
AS C189-1971 withdrawn 1976.
AS C147-1972 withdrawn 1976.
Second edition AS 3147-1976.
Third edition 1981.
Fourth edition 1988.
Fifth edition 1992.
AS 2893-1986 | Electric cables - Lead and lead alloy sheaths - Composition |
AS 3863-1991 | Galvanized mild steel wire for armouring cables |
AS 3100-1990 | Approval and test specification - General requirements for electrical equipment |
AS 1995-1977 | Welding cables |
AS 1125-1993 | Conductors in insulated electric cables and flexible cords |
AS 3000-1986 | Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules) |
AS 2122.1-1993 | Combustion characteristics of plastics Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics |
AS 3155-1986 | Approval and test specification - Neutral screened cables for working voltages of 0.6/1 kV |
AS 3116-1990 | Approval and test specification - Electric cables - Elastomer insulated - For working voltages up to and including 0.6/1 kV |
AS 3015-1993 | Electrical installations - Extra-low voltage d.c. power supplies within public telecommunications networks |
AS 3516.2-1998 | Siting of radiocommunications facilities - Guidelines for fixed, mobile and broadcasting services operating at frequencies above 30 MHz |
AS/NZS 1995:1995 | Welding cables |
AS 2832.5-2002 | Cathodic protection of metals - Steel in concrete structures |
AS/NZS 2832.1:1998 | Cathodic protection of metals - Pipes and cables |
AS/NZS 3123:2000 | Approval and test specification - Plugs, socket-outlets and couplers for general industrial application |
AS 1735.2-1993 | Lifts, escalators and moving walks Passenger and goods lifts - Electric |
AS 3653-1993 | Boilers - Safety, management, combustion and other ancillary equipment |
AS 4072.1-1992 | Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints |
AS 3811-1998 | Hard-wired patient alarm systems |
AS 2381.1-1991 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements |
AS 2201.1-1998 | Intruder alarm systems Systems installed in client’s premises |
AS 1972-1991 | Electric cables - Underground coal mines - Other than reeling and trailing cables |
AS 3200-1986 | Approval and test specification - Electromedical equipment - General requirements |
AS/NZS 3003:1999 | Electrical installations - Patient treatment areas of hospitals and medical and dental practices |
AS/NZS 2373.1:1995 | Electric cables for control and protection circuits Multicore control cables |
AS 3004-1993 | Electrical installations - Marinas and pleasure craft at low voltage |
AS 1670.1-1995 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire |
AS/NZS 2373.2:1995 | Electric cables for control and protection circuits - Twisted pair control cables |
AS/NZS 3155:1995 | Approval and test specification - Electric cables - Neutral screened - For working voltages up to and including 0.6/1 kV |
AS/NZS 4898:1997 | Approval and test specification - Circuit-breakers for overcurrent protection for household and similar installations |
AS 2067-1984 | Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV |
AS 2276.1-1992 | Cables for traffic signal installations - Multicore power cables |
AS 1735.6(INT)-1996 | Lifts, escalators and moving walks Moving walks |
AS 2697-1990 | Jumper leads for automotive starting |
AS 1735.4-1986 | SAA Lift Code Service lifts - Power-operated |
AS 2353-1999 | Pedestrian push-button assemblies |
AS/NZS 3123:1994 | Approval and test specification - Plugs, socket-outlets and couplers for general industrial application |
AS/NZS 3130:1995 | Approval and test specification - Beauty therapy equipment |
AS 1026-1992 | Electric cables - Impregnated paper insulated - Working voltages up to and including 33 kV |
AS 2243.6-1990 | Safety in laboratories - Mechanical aspects |
AS 1187-1996 | Farm milk cooling and storage systems |
AS/NZS 3808:1998 | Insulating and sheathing materials for electric cables |
AS 2832.3-1992 | Cathodic protection of metals Fixed immersed structures |
AS/NZS 3008.1.2:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions |
AS 1735.5-1996 | Lifts, escalators and moving walks Escalators |
AS/NZS 3260:1993 | Approval and test specification - Safety of information technology equipment including electrical business equipment |
AS/NZS 4249:1994 | Electrical safety practices - Film, video and television sites |
AS 1125-1993 | Conductors in insulated electric cables and flexible cords |
AS 1154.3-1985 | Insulator and conductor fittings for overhead power lines - Performance and general requirements for helical fittings |
AS/NZS 3187:1995 | Approval and test specification - Mineral-insulated metal-sheathed cables |
AS 2243.7-1991 | Safety in laboratories - Electrical aspects |
AS 1299-1993 | Electrical equipment for coal mines - Flameproof restrained plugs and receptacles |
AS 2144-1995 | Traffic signal lanterns |
AS 1735.5-2003 | Lifts, escalators and moving walks Lifts, escalators and moving walks |
AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 3012:1995 | Electrical installations - Construction and demolition sites |
AS 3081.2-1993 | Telecommunications installations - Twisted pair cables for telecommunications applications - Cables for connection to carrier networks |
AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS 1670.2-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning - Local fire |
AS 2832.4-1994 | Cathodic protection of metals Internal surfaces |
AS/NZS 3013:1995 | Electrical installations - Classification of the fire and mechanical performance of wiring systems |
AS 1076.1-1977 | Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) Basic requirements |
AS 3082.2-1993 | Telecommunications installations - Optical fibre cables for telecommunications applications - Cables for connection to carrier networks |
AS/NZS 3832:1998 | Electrical installations - Cold-cathode illumination systems |
AS 1603.6-1987 | Automatic fire detection and alarm systems - Fire alarm bells |
AS/NZS 1972:1996 | Electric cables - Underground coal mines - Other than reeling and trailing |
SAA HB37.2-1993 | Handbook of Australian fire Standards Electrical equipment (Reconfirmed 2016) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.