• Shopping Cart
    There are no items in your cart

ASTM E 1316 : 2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Terminology for Nondestructive Examinations

Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

01-01-2007

€96.91
Excluding VAT

Committee
E 07
DocumentType
Reference Material
Pages
33
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1 This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods.

1.2 Committee E07 recognizes that the terms examination, testing and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the term examination and its derivatives when describing the application of nondestructive test methods. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.)

1.3 Section A defines terms that are common to multiple NDT methods, whereas, the subsequent sections define terms pertaining to specific NDT methods.

1.4 As shown on the chart below, when nondestructive testing produces an indication, the indication is subject to interpretation as false, nonrelevant or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.

ASTM E 1888/E1888M : 2017 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
ASTM E 428 : 2008 : R2013 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing (Withdrawn 2019)
ASTM F 640 : 2012 Standard Test Methods for Determining Radiopacity for Medical Use
ASTM E 2261/E2261M : 2017 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM E 1312 : 2018 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
ASTM E 1606 : 2015 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
ASTM E 1411 : 2016 Standard Practice for Qualification of Radioscopic Systems
ASTM E 1219 : 2016 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM E 2738 : 2018 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
ASTM E 505 : 2015 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
ASTM A 435/A435M : 2017 Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM E 1815 : 2018 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E 1603/E1603M : 2011 : R2017 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E 1441 : 2011 Standard Guide for Computed Tomography (CT) Imaging
ASTM E 2971 : 2016 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM E 192 : 2015 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
ASTM E 802 : 2015 Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness
ASTM E 2375 : 2016 Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E 2033 : 2017 Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
ASTM E 310 : 2015 Standard Reference Radiographs for Tin Bronze Castings
ASTM E 1735 : 2007 : R2014 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV
ASTM E 1118/E1118M : 2016 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E 2699 : 2018 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
ASTM E 2073 : 2019 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E 494 : 2015 Standard Practice for Measuring Ultrasonic Velocity in Materials
ASTM E 2580 : 2017 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E 1210 : 2016 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
ASTM E 215 : 2016 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
ASTM E 431 : 1996 : R2016 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
ASTM E 2001 : 2018 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
ASTM E 746 : 2018 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E 747 : 2018 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
ASTM E 1000 : 2016 Standard Guide for Radioscopy
ASTM E 1161 : 2009 : R2014 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
ASTM E 2905/E2905M : 2019 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
ASTM A 577/A577M : 2017 Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
ASTM E 543 : 2015 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 2698 : 2018 : EDT 1 Standard Practice for Radiographic Examination Using Digital Detector Arrays
ASTM E 797/E797M : 2015 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM E 3179 : 2018 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
ASTM E 1320 : 2015 Standard Reference Radiographs for Titanium Castings
ASTM A 578/A578M : 2017 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM E 2445/E2445M : 2014 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
ASTM E 2906/E2906M : 2018 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
ASTM E 690 : 2015 Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM E 1571 : 2011 : R2016 : EDT 1 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
ASTM E 213 : 2014 : EDT 1 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
ASTM E 1742/E1742M : 2018 Standard Practice for Radiographic Examination
ASTM D 1746 : 2015 Standard Test Method for Transparency of Plastic Sheeting
ASTM E 2096/E2096M : 2016 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
ASTM E 750 : 2015 Standard Practice for Characterizing Acoustic Emission Instrumentation
ASTM E 3081 : 2016 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts
ASTM E 2337/E2337M : 2010 : R2015 Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing (Withdrawn 2020)
ASTM E 1936 : 2015 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
ASTM E 1444/E1444M : 2016 : EDT 1 Standard Practice for Magnetic Particle Testing
ASTM E 571 : 2012 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM C 1740 : 2016 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
ASTM E 2598/E2598M : 2013 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
ASTM E 2737 : 2010 : R2018 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
ASTM E 3022 : 2018 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
ASTM E 2775 : 2016 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
ASTM E 2533 : 2017 : EDT 1 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
ASTM E 2660 : 2017 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
ASTM E 1324 : 2016 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
ASTM E 186 : 2015 Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ASTM E 1672 : 2012 Standard Guide for Computed Tomography (CT) System Selection
ASTM E 2422 : 2017 Standard Digital Reference Images for Inspection of Aluminum Castings
ASTM E 3213 : 2019 Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
ASTM E 1955 : 2004 : R2014 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM <astmref rid="a00002"/> Reference Radiographs
ASTM E 2904 : 2017 Standard Practice for Characterization and Verification of Phased Array Probes
ASTM E 426 : 2016 Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
ASTM E 2868 : 2017 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness
ASTM E 1158 : 2014 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material (Withdrawn 2019)
ASTM E 566 : 2019 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals
ASTM E 2338 : 2017 Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards
ASTM E 2662 : 2015 Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E 570 : 2015 : EDT 1 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM E 280 : 2015 Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASTM E 2930 : 2013 Standard Practice for Pressure Decay Leak Test Method
ASTM E 587 : 2015 Standard Practice for Ultrasonic Angle-Beam Contact Testing
ASTM E 1209 : 2018 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
ASTM E 748 : 2019 Standard Guide for Thermal Neutron Radiography of Materials
ASTM E 3170/E3170M : 2018 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
ASTM E 2984/E2984M : 2014 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization
ASTM C 1332 : 2018 Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM E 1647 : 2016 Standard Practice for Determining Contrast Sensitivity in Radiology
ASTM E 2863 : 2017 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
ASTM E 2907/E2907M : 2013 : R2019 Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
ASTM E 1648 : 2015 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM D 7006 : 2003 : R2013 Standard Practice for Ultrasonic Testing of Geomembranes
ASTM E 3167/E3167M : 2018 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints
ASTM E 1030/E1030M : 2015 Standard Practice for Radiographic Examination of Metallic Castings
ASTM E 3024/E3024M : 2019 Standard Practice for Magnetic Particle Testing for General Industry
ASTM E 2003 : 2010 : R2014 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
ASTM E 499/E499M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode<rangeref></rangeref >
ASTM E 432 : 1991 : R2017 : EDT 1 Standard Guide for Selection of a Leak Testing Method
ASTM E 569/E569M : 2013 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
ASTM E 1033 : 2013 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019)
ASTM C 597 : 2016 Standard Test Method for Pulse Velocity Through Concrete
ASTM F 1430/F1430M : 2018 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
ASTM B 891/B891M : 2019 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
ASTM E 3169 : 2018 Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
ASTM E 1932 : 2012 : R2017 Standard Guide for Acoustic Emission Examination of Small Parts
ASTM E 3135 : 2018 Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil
ASTM E 1065/E1065M : 2014 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
ASTM E 1935 : 1997 : R2013 Standard Test Method for Calibrating and Measuring CT Density
ASTM E 3101 : 2018 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
ASTM C 1624 : 2005 : R2015 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM E 664/E664M : 2015 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
ASTM F 1512 : 1994 : R2011 Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies (Withdrawn 2020)
ASTM E 273 : 2015 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ASTM E 2597/E2597M : 2014 Standard Practice for Manufacturing Characterization of Digital Detector Arrays
ASTM E 2072 : 2014 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2023)
ASTM E 2339 : 2015 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
ASTM E 1419/E1419M : 2015 : REV A Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
ASTM E 1001 : 2016 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM E 1774 : 2017 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
ASTM E 390 : 2015 Standard Reference Radiographs for Steel Fusion Welds
ASTM E 801 : 2016 Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices
ASTM C 1383 : 2015 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
ASTM E 1685 : 2013 Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
ASTM E 2862 : 2018 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM F 3187 : 2016 Standard Guide for Directed Energy Deposition of Metals
ASTM E 1695 : 1995 : R2013 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM E 650/E650M : 2017 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
ASTM E 2973 : 2015 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings
ASTM E 493/E493M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E 999 : 2015 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
ASTM E 1067/E1067M : 2018 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
ASTM E 751/E751M : 2017 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
ASTM E 2478 : 2011 : R2016 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
ASTM E 2479 : 2016 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves
ASTM E 3052 : 2016 Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array
ASTM C 1331 : 2018 Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
ASTM E 94/E94M : 2017 Standard Guide for Radiographic Examination Using Industrial Radiographic Film
ASTM E 1390 : 2012 : R2016 Standard Specification for Illuminators Used for Viewing Industrial Radiographs
ASTM E 588 : 2003 : R2014 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
ASTM E 165/E165M : 2018 Standard Practice for Liquid Penetrant Testing for General Industry
ASTM E 2884 : 2017 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
ASTM E 2700 : 2014 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
ASTM E 1816 : 2018 Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods
ASTM E 2446 : 2016 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
ASTM E 1629 : 2012 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM E 243 : 2018 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
ASTM E 1495/E1495M : 2017 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
ASTM E 1962 : 2014 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
ASTM E 2374 : 2016 Standard Guide for Acoustic Emission System Performance Verification
ASTM E 309 : 2016 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E 376 : 2019 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
ASTM E 3102 : 2018 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
ASTM E 1736 : 2015 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
ASTM E 592 : 2015 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates <fraction><num>1</num><den>4 </den></fraction> to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with <brk/>Cobalt-60
ASTM E 1211/E1211M : 2017 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM E 1106 : 2012 : R2017 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
ASTM E 317 : 2016 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
ASTM E 709 : 2015 Standard Guide for Magnetic Particle Testing
ASTM E 2104 : 2015 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
ASTM E 2191/E2191M : 2016 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
ASTM E 2007 : 2010 : R2016 Standard Guide for Computed Radiography
ASTM E 2869 : 2017 Standard Digital Reference Images for Magnesium Castings
ASTM E 1114 : 2009 : R2014 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
ASTM E 703 : 2014 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
ASTM E 164 : 2019 Standard Practice for Contact Ultrasonic Testing of Weldments
ASTM E 1066/E1066M : 2019 Standard Practice for Ammonia Colorimetric Leak Testing
ASTM E 2985/E2985M : 2014 : R2019 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM E 2981 : 2015 : EDT 1 Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
ASTM F 2895 : 2015 Standard Practice for Digital Radiography of Cast Metallic Implants
ASTM E 2024/E2024M : 2011 : R2019 Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
ASTM E 1004 : 2017 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM C 215 : 2014 Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens
ASTM E 1817 : 2008 : R2014 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM E 498/E498M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E 749/E749M : 2017 Standard Practice for Acoustic Emission Monitoring During Continuous Welding
ASTM E 1814 : 2014 Standard Practice for Computed Tomographic (CT) Examination of Castings
ASTM E 2861 : 2016 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
ASTM E 2581 : 2014 Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
ASTM E 2983 : 2014 : R2019 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
ASTM E 3100 : 2017 Standard Guide for Acoustic Emission Examination of Concrete Structures
ASTM E 2297 : 2015 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM B 886 : 2019 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
ASTM E 1079 : 2016 Standard Practice for Calibration of Transmission Densitometers
ASTM E 1255 : 2016 Standard Practice for Radioscopy
ASTM E 3023 : 2015 Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data
ASTM E 1418 : 2016 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM E 1139/E1139M : 2017 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
ASTM E 1961 : 2016 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
ASTM E 2661/E2661M : 2015 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
ASTM E 1208 : 2016 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
ASTM E 2023 : 2019 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
ASTM E 446 : 2015 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E 1417/E1417M : 2016 Standard Practice for Liquid Penetrant Testing
ASTM E 1025 : 2018 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
ASTM E 114 : 2015 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM E 1931 : 2016 Standard Guide for Non-computed X-Ray Compton Scatter Tomography
ASTM E 272 : 2015 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM E 2929 : 2018 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction
ASTM E 1734 : 2016 : REV A Standard Practice for Radioscopic Examination of Castings
ASTM E 2669 : 2016 : EDT 1 Standard Digital Reference Images for Titanium Castings
ASTM E 1220 : 2016 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
ASTM E 2928/E2928M : 2017 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
ASTM E 2002 : 2015 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
ASTM E 1416 : 2016 : REV A Standard Practice for Radioscopic Examination of Weldments
ASTM E 2076/E2076M : 2015 Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
ASTM E 2534 : 2015 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
ASTM E 242 : 2015 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed
ASTM E 2223 : 2013 : R2018 : EDT 1 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
ASTM E 689 : 2015 Standard Reference Radiographs for Ductile Iron Castings
ASTM E 127 : 2015 Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks
ASTM E 545 : 2014 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
ASTM E 3147 : 2018 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems
ASTM E 1930/E1930M : 2017 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
ASTM E 3045 : 2016 Standard Practice for Crack Detection Using Vibroacoustic Thermography
ASTM E 1901 : 2018 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods
ASTM E 2373/E2373M : 2014 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM E 155 : 2015 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.