BS EN 10028-1:2017
Current
The latest, up-to-date edition.
Flat products made of steels for pressure purposes General requirements
Hardcopy , PDF
English
22-08-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Tolerances on dimensions
5 Calculation of mass
6 Classification and designation
7 Information to be supplied by the purchaser
8 Requirements
9 Inspection
10 Sampling
11 Test methods
12 Marking
Annex A (informative) - Changes to the previous version
EN 10028-1:2007+A1:2009
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2014/68/EU
aimed to be covered
Defines general technical delivery conditions for flat products for the construction of pressure equipment.
| Committee |
ISE/107
|
| DevelopmentNote |
Supersedes 96/703145 DC. (03/2003) Together with BS EN 10028-2, BS EN 10028-3 & BS EN 10029, it supersedes BS 1501-1(1980) and partially supersedes BS 1501-2(1988). (07/2003) Supersedes 08/30187570 DC. (06/2009) Supersedes 14/30312182 DC. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies general technical delivery conditions for flat products for the construction of pressure equipment. The general technical delivery conditions in EN 10021 also apply. NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.
| Standards | Relationship |
| NBN EN 10028-1 : 2008 + A1 2009 | Identical |
| SN EN 10028-1 : 2008 CORR 2010 | Identical |
| ISO 9328-1:2011 | Similar to |
| UNE-EN 10028-1:2009 | Identical |
| UNI EN 10028-1 : 2009 | Identical |
| NS EN 10028-1 : 2017 | Identical |
| NEN EN 10028-1 : 2017 | Identical |
| EN 10028-1:2017 | Identical |
| I.S. EN 10028-1:2017 | Identical |
| DIN EN 10028-1:2017-10 | Identical |
| UNE-EN 10028-1:2017 | Identical |
| DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-305/2(2003) : 2003 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| DEFSTAN 02-728/2(2001) : INTERIM | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| DEFSTAN 02-305/3(2010) : 2010 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| 07/30160560 DC : DRAFT JAN 2007 | PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| 02/710149 DC : 0 | PD 2790 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SHELL BOILERS |
| BS 7777-4:1993 | Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Specification for the design and construction of single containment tanks for the storage of liquid oxygen, liquid nitrogen and liquid argon |
| BS EN 286-2:1992 | Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| BS 4485-4:1996 | Water cooling towers Code of practice for structural design and construction |
| PD 7777:2000 | Alternative steel selection and its effect on design and testing of tanks to BS 7777 |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN ISO 9445-2:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009) |
| ISO 9444-2:2009 | Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate |
| EN 10079:2007 | Definition of steel products |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EN 10028-6:2017 | Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
| EN ISO 9444-2:2010 | Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) |
| EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 18286:2010 | Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008) |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EN 10028-5:2017 | Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
| ISO 9445-2:2009 | Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 9444-1:2009 | Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN ISO 2566-2:1999 | Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10307:2001 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| ISO 18286:2008 | Hot-rolled stainless steel plates — Tolerances on dimensions and shape |
| ISO 9445-1:2009 | Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.