CEI EN 60076-1 : 2015
Current
The latest, up-to-date edition.
POWER TRANSFORMERS - PART 1: GENERAL
Hardcopy , PDF
English - Italian
01-01-2015
FOREWORD
1. Scope
2. Normative references
3. Terms and definitions
4. Service conditions
5. Rating and general requirements
6. Requirements for transformers
having a tapped winding
7. Connection phase displacement symbols
8. Rating plates
9. Safety, environmental and other requirements
10. Tolerances
11. Tests
12. Electromagnetic compatibility (EMC)
13. High frequency switching transients
Annex A (informative) - Check list of information
to be provided with enquiry and order
Annex B (informative) - Examples of specifications
for transformers with tappings
Annex C (informative) - Specification of short-circuit
impedance by boundaries
Annex D (informative) - Examples of three-phase
transformer connections
Annex E (normative) - Temperature correction of
load loss
Annex F (informative) - Facilities for future fitting of
condition monitoring systems to Transformers
Annex G (informative) - Environmental and safety
considerations
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Describes the three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA.
Committee |
CT 14
|
DevelopmentNote |
Classificazione CEI 14-4/1 (08/2001) Supersedes CEI 14-4, CEI 14-4 V1, CEI 14-4 V2, CEI 14-4 V3 and CEI 14-4 V4. (03/2004)
|
DocumentType |
Standard
|
Pages |
152
|
PublisherName |
Comitato Elettrotecnico Italiano
|
Status |
Current
|
Supersedes |
Standards | Relationship |
IEC 60076-1:2011 | Identical |
EN 60076-1:2011 | Identical |
IEC 60076-15:2015 | Power transformers - Part 15: Gas-filled power transformers |
IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
EN 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
CEI 10-1 : 8ED 1997 | OLI MINERALI ISOLANTI PER TRASFORMATORI E PER APPARECCHIATURE ELETTRICHE |
IEC TR 60616:1978 | Terminal and tapping markings for power transformers |
EN 60076-5:2006 | Power transformers - Part 5: Ability to withstand short-circuit |
IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
EN 60076-11:2004 | Power transformers - Part 11: Dry-type transformers |
IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
ISO 3:1973 | Preferred numbers Series of preferred numbers |
IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
CEI 14-43 : 2011 | GUIDE FOR THE APPLICATION, SPECIFICATION, AND TESTING OF PHASE-SHIFTING TRANSFORMERS |
CEI 14-42 : 2011 | CONVERTER TRANSFORMERS - PART 3: APPLICATION GUIDE |
IEC 60068-3-3:1991 | Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments |
IEC 60076-4:1976 | Power transformers - Part 4: Tappings and connections |
IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEC 60076-12:2008 | Power transformers - Part 12: Loading guide for dry-type power transformers |
EN 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
IEC 60050-421:1990 | International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
CEI 14-45 : 2012 | POWER TRANSFORMERS DETERMINATION OF SOUND LEVELS - APPLICATION GUIDE |
IEC 60076-6:2007 | Power transformers - Part 6: Reactors |
IEC 62032:2012 | Guide for the Application, Specification and Testing of Phase-Shifting Transformers |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
IEEE C57.142 : 2010 | GUIDE TO DESCRIBE THE OCCURRENCE AND MITIGATION OF SWITCHING TRANSIENTS INDUCED BY TRANSFORMERS, SWITCHING DEVICE, AND SYSTEM INTERACTION |
IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
IEC 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications |
IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
IEC TS 60076-14:2009 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
IEC 60076-13:2006 | Power transformers - Part 13: Self-protected liquid-filled transformers |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
EN 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
CEI 36-2 : 3ED 1987 | |
EN 60721-3-4:1995/A1:1997 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS |
IEC 60076-10-1:2016 | Power transformers - Part 10-1: Determination of sound levels - Application guide |
IEC 60076-16:2011 | Power transformers - Part 16: Transformers for wind turbine applications |
IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
IEC 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.