DEFSTAN 08-107/3(2013) : 2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
Available format(s)
Hardcopy , PDF
Withdrawn date
02-02-2014
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
0 Introduction
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Security Classification
7 Quality Management
8 Safety Management
9 Environmental and Ergonomic Design Considerations
10 Functional Design Considerations
11 Component/Material Selection
12 Software, Embedded Software and Firmware
13 Testing and Trials Requirements
14 Design Disclosure
Annex A - Normative References
Annex B - Definitions
Annex C - Abbreviations
Describes the requirements for the design, development and testing of Low Voltage (LV) Electrotechnical and Weapon Equipment intended for fitting as appropriate in HM Surface Ships, Submarines and Shore Establishments.
| DevelopmentNote |
Supersedes DEFSTAN 08-107/2(2001). (01/2014)
|
| DocumentType |
Standard
|
| Pages |
94
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Withdrawn
|
| Supersedes |
| DEFSTAN 59-411(PT1)/2(2014) : 2014 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| DEFSTAN 02-123(PT1)/3(2015) : 2015 | REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 1: LAUNDRIES AND ASSOCIATED COMPARTMENTS |
| DEFSTAN 00-88/2(2014) : 2014 | PACKAGING FOR AMMUNITION AND EXPLOSIVES |
| DEFSTAN 00-088/3(2017) : 2017 | PACKAGING FOR AMMUNITION AND EXPLOSIVES |
| DEFSTAN 02-123(PT2)/3(2015) : 2015 | REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 2: LAUNDRY MACHINERY, EQUIPMENT AND FITTINGS |
| DEFSTAN 02-250(PT0)/2(2015) : 2015 | MARITIME SUPPORT MANAGEMENT - PART 0: GENERAL INFORMATION FOR TYPE A AND TYPE B SUPPORT |
| BS 381C:1996 | Specification for colours for identification, coding and special purposes |
| BS EN ISO 286-2:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
| DEFSTAN 81-41(PT5)/6(2008) : 2008 | PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES |
| DEFSTAN 02-632/2(2004) : 2004 | REQUIREMENTS FOR AC AND DC MOTORS |
| BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| IEC 60874-19:1995 | Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) |
| BS EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements |
| BS EN ISO 3677:2016 | Filler metal for soldering and brazing. Designation |
| DEFSTAN 59-411(PT5)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 5: CODE OF PRACTICE FOR TRI-SERVICE DESIGN AND INSTALLATION |
| DEFSTAN 81-41(PT4)/7(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 4: SERVICE PACKAGING INSTRUCTION SHEET (SPIS) |
| DEFSTAN 02-324(PT1)/1(2000) : 2000 | REQUIREMENTS FOR HYDRAULIC SYSTEMS - PART 1: GENERAL |
| DEFSTAN 02-784/3(2007) : 2007 | REQUIREMENTS FOR SAFETY SIGNS AND COLOURS |
| DEFSTAN 02-729(PT2)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 2: MAGNETIC PARTICLE |
| DEFSTAN 05-10(PT2)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 2: DIGITAL PRODUCT DEFINITION INFORMATION |
| DEFSTAN 02-530/2(2004) : 2004 | REQUIREMENTS FOR MAIN AND DISTRIBUTION SWITCHGEAR - CATEGORY 2 |
| DEFSTAN 00-42(PT4)/2(2008) : 2008 | RELIABILITY AND MAINTAINABILITY (R&M) ASSURANCE ACTIVITY - PART 4: TESTABILITY |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| DEFSTAN 00-40(PT1)/7(2012) : 2012 | RELIABILITY AND MAINTAINABILITY - PART 1: MANAGEMENT RESPONSIBILITIES AND REQUIREMENTS FOR PROGRAMMES AND PLANS |
| BS EN 60445:2010 | Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors |
| DEFSTAN 00-250(PT4)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 4: HFI METHOD, TOOLS AND TECHNIQUES |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| BS MA 18:1973 | Specification for salt water piping systems in ships |
| BS CECC 23300-801:1998 | Harmonized system of quality assessment for electronic components. Capability detail specification: multi-layer printed boards |
| BS EN 60825:1992 | Radiation safety of laser products, equipment classification, requirements and user\'s guide |
| DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
| BS CECC 75201:1992 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim example. Detail specification/blank detail specification. Circular connectors for frequencies below 3 MHz |
| BS 7752-2:1994 | Free running type wire thread inserts Specification for ISO metric fine pitch threads |
| DEFSTAN 61-5(PT1)/4(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - PART 1: TERMINOLOGY AND DEFINITIONS |
| BS EN 62149-1:2012 | Fibre optic active components and devices. Performance standards General and guidance |
| DEFSTAN 81-41(PT2)/6(2005) : 2005 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| DEFSTAN 02-512(PT6)/2(2002) : 2002 | GUIDE TO CABLES, ELECTRICAL AND ASSOCIATED ITEMS - PART 6: CABLES, ELECTRICAL, MINIATURE, SUB-MINIATURE AND EQUIPMENT WIRES |
| DEFSTAN 02-745/2(2012) : 2012 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
| DEFSTAN 00-3/4(2011) : 2011 | DESIGN GUIDANCE FOR THE TRANSPORTABILITY OF EQUIPMENT |
| BS 1363-2(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
| DEFSTAN 00-56(PT2)/4(2007) : 2007 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1 |
| BS 6913-13:1997 | Operation and maintenance of earth-moving machinery Specification for lubrication fittings. Nipple type |
| DEFSTAN 01-5/17(2011) : 2011 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| DEFSTAN 07-226/3(2004) : 2004 | REQUIREMENTS FOR ELECTRICAL TESTING OF EQUIPMENT |
| DEFSTAN 61-5(PT4)/4(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - QUALITY OF ELECTRICAL POWER SYSTEMS IN HM SHIPS |
| DEFSTAN 02-606/2(2007) : 2007 | SELECTION OF TORSIONMETER SYSTEMS |
| BS ISO/IEC 12207:1995 | Information technology. Software life cycle processes |
| DEFSTAN 03-24/5(2008) : 2008 | CHROMIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN ISO 1660:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing |
| BS EN 61340-5-1:2016 | Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements |
| BS 2754(1976) : 1976 | MEMORANDUM - CONSTRUCTION OF ELECTRICAL EQUIPMENT FOR PROTECTION AGAINST ELECTRIC SHOCK |
| DEFSTAN 81-41(PT3)/5(2007) : 2007 | PACKAGING OF DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TESTING |
| DEFSTAN 02-729(PT4)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 4: LIQUID PENETRANT |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| DEFSTAN 81-41(PT1)/7(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
| DEFSTAN 02-607/3(2013) : 2013 | DESIGN OF HIGH VOLTAGE ELECTRICAL POWER SYSTEMS FOR HM SHIPS, SUBMARINES AND THE ROYAL FLEET AUXILIARY |
| DEFSTAN 00-250(PT2)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 2: PARTICULAR PEOPLE-RELATED REQUIREMENTS |
| DEFSTAN 08-123/2(2012) : 2012 | REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS |
| DEFSTAN 00-600/2(2011) : 2011 | INTEGRATED LOGISTIC SUPPORT - REQUIREMENTS FOR MOD PROJECTS |
| BS ISO 6194-2:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Vocabulary |
| BS EN 60034-5:2001 | Rotating electrical machines Degrees of protection provided by the integral design of rotating electrical machines (IP code). Classification |
| DEFSTAN 02-773/3(2013) : 2013 | MINIMUM NON-DESTRUCTIVE EXAMINATION ACCEPTANCE STANDARDS FOR WELDS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| DEFSTAN 08-4(PT1)/3(2010) : 2010 | NUCLEAR WEAPONS EXPLOSIONS EFFECTS AND HARDENING - PART 1: NUCLEAR WEAPONS EXPLOSIONS: RESULTING ENVIRONMENTS |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| BS EN ISO 7010 : 2012 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011) |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| BS 6716:1986 | Guide to properties and types of rubber |
| DEFSTAN 02-862(PT2)/3(2011) : 2011 | NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS |
| BS EN 60297-3-100:2009 | Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series Basic dimensions of front panels, subracks, chassis, racks and cabinets |
| BS EN 61558-2-14:2013 | Safety of transformers, reactors, power supply units and combination thereof Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| DEFSTAN 21-5/3(2009) : 2009 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| DEFSTAN 02-747(PT2)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTING WITH WELDING PERMITTED TO THE WETTED SURFACE |
| BS EN 60774-5:2004 | Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS D-VHS |
| BS ISO 668 : 2013 | SERIES 1 FREIGHT CONTAINERS - CLASSIFICATION, DIMENSIONS AND RATINGS |
| BS ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IEC 61169-1:2013 | Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
| DEFSTAN 02-729(PT1)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 1: RADIOGRAPHIC |
| DEFSTAN 02-605(PT1)/2(2003) : 2003 | GUIDE TO SELECTION OF SENSORS FOR MEASUREMENT OF SYSTEM PARAMETERS - PART 1: SELECTION OF LIQUID LEVEL, TEMPERATURE AND PRESSURE SENSORS |
| DEFSTAN 00-250(PT1)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 1: OVERARCHING PEOPLE-RELATED REQUIREMENTS |
| DEFSTAN 61-17/5(2009) : 2009 | THE SELECTION AND INTRODUCTION OF BATTERIES AND FUEL CELLS FOR SERVICE USE |
| DEFSTAN 02-862(PT1)/3(2011) : 2011 | NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE |
| BS 4779:1971 | Recommendations for measurement of the optical transfer function of optical devices |
| DEFSTAN 00-101(PT1)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 1: SURFACE SHIPS |
| DEFSTAN 00-250(PT0)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 0: HUMAN FACTORS INTEGRATION |
| DEFSTAN 08-134/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND PREPARATION OF AERIAL AND VISUAL SIGNALLING RIG AND RADHAZ DRAWINGS - CATEGORY 2 |
| DEFSTAN 00-42(PT3)/4(2011) : 2011 | RELIABILITY AND MAINTAINABILITY ASSURANCE GUIDE - PART 3: R&M CASE |
| DEFSTAN 00-35(PT3)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
| BS 7751-1:1994 | Prevailing torque type wire thread inserts Specification for ISO metric coarse pitch threads |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| DEFSTAN 21-24(PT1)/2(2000) : 2000 | DATA TRANSMISSION - DIRECT MEMORY ACCESS INTERFACE STANDARD - PART 1: THE SOFTWARE INTERFACE |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| DEFSTAN 02-729(PT5)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 5: ULTRASONIC |
| IEC 60874-1:2011 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
| BS 1363-1(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS |
| BS ISO/IEC 90003:2014 | Software engineering. Guidelines for the application of ISO 9001:2008 to computer software |
| DEFSTAN 00-101(PT3)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION |
| BS EN 2536:1995 | Hard anodizing of aluminium alloys |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| BS EN ISO 286-1:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| BS ISO 10074:2010 | Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| BS 1363-5:2008 | 13 A plugs, socket-outlets, adaptors and connection units Specification for fused conversion plugs |
| DEFSTAN 02-723/2(2011) : 2011 | REQUIREMENTS FOR MARKER PLATES |
| DEFSTAN 81-41(PT6)/8(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| DEFSTAN 08-109/3(2009) : 2009 | REQUIREMENTS FOR THE DESIGN OF LOW VOLTAGE SUPPLY AND DISTRIBUTION SYSTEMS IN HM SURFACE SHIPS AND NUCLEAR SUBMARINES |
| BS 1363-4(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
| BS 7752-1(1994) : 1994 | FREE RUNNING TYPE WIRE THREAD INSERTS - PART 1: SPECIFICATION FOR ISO METRIC COARSE PITCH THREADS |
| IEC 60874-14:1993 | Connectors for optical fibres and cables - Part 14: Sectional specification for fibre optic connector - Type SC |
| DEFSTAN 05-10(PT1)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 1: HARDCOPY/MICROFORM PRODUCT DEFINITION INFORMATION |
| BS 7751-2:1994 | Prevailing torque type wire thread inserts Specification for ISO metric fine pitch threads |
| DEFSTAN 00-101(PT5)/1(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 5: SHIP WEAPON DYNAMIC SAFETY |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| PD IEC/TS 62647-1:2012 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Preparation for a lead-free control plan |
| DEFSTAN 61-21/3(2009) : 2009 | GENERAL SPECIFICATION FOR BATTERIES |
| DEFSTAN 02-770(PT1)/3(2010) : 2010 | REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL |
| DEFSTAN 08-50/2(2010) : 2010 | INSTALLATION GUIDANCE FOR MEETING THE REQUIREMENTS OF NAVAL TEMPEST TESTING |
| DEFSTAN 05-10(PT0)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION |
| DEFSTAN 08-148/1(2001) : 2001 | GUIDANCE FOR THE CHEMICAL AND BIOLOGICAL HARDENING OF HM SURFACE SHIPS |
| DEFSTAN 02-769/2(2007) : 2007 | APPROVAL SYSTEM FOR WELDING CONSUMABLES FOR STRUCTURAL STEELS |
| BS ISO 4156-1:2005 | Straight cylindrical involute splines. Metric module, side fit Generalities |
| BS PAS 555(2013) : 2013 | CYBER SECURITY RISK - GOVERNANCE AND MANAGEMENT - SPECIFICATION |
| IEC TR 62691:2016 | Optical fibre cables - Guidelines to the installation of optical fibre cables |
| DEFSTAN 21-24(PT2)/2(2000) : 2000 | DATA TRANSMISSION - DIRECT MEMORY ACCESS INTERFACE STANDARD - PART 2: THE ELECTRICAL INTERFACE |
| DEFSTAN 02-314/3(2005) : 2005 | COMPRESSED AIR SYSTEMS |
| DEFSTAN 02-770(PT2)/3(2010) : 2010 | WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 2: APPROVAL OF WELDING PROCEDURES FOR SUBMARINE CONSTRUCTION AND UPKEEP |
| BS 1155:2003 | Natural rubber compounds for extrusion. Specification |
| IEC 60050-651:2014 | International Electrotechnical Vocabulary (IEV) - Part 651: Live working |
| BS ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances |
| DEFSTAN 02-862(PT3)/3(2011) : 2011 | NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS |
| DEFSTAN 05-57/5(2005) : 2005 | CONFIGURATION MANAGEMENT OF DEFENCE MATERIEL |
| PD 6484:1979 | Commentary on corrosion at bimetallic contacts and its alleviation |
| DEFSTAN 00-101(PT4)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 4: GENERIC NAVAL ENVIRONMENT |
| BS EN 62040-2:2006 | Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements |
| BS 1916-1:2009 | Limits and fits for engineering Guide to limits and tolerances |
| BS 4783-8:1994 | Storage, transportation and maintenance of media for use in data processing and information storage Recommendations for 4 mm and 8 mm helical scan tape cartridges |
| BS 5109:1974 | Glossary of terms used in assessing the performance of optical devices and systems |
| BS EN 60094-3:1997 | Magnetic tape sound recording and reproducing systems Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| DEFSTAN 02-337(PT1)/1(2000) : 2000 | REQUIREMENTS FOR ELASTOMERIC TOROIDAL SEALING RINGS ('O' RINGS) - PART 1: GENERAL AND SURFACE FINISH STANDARDS RELATIVE TO MANUFACTURER CATEGORY 2 |
| BS 4G 198-1:1997 | Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification |
| DEFSTAN 05-61(PT1)/5(2010) : 2010 | QUALITY ASSURANCE PROCEDURAL REQUIREMENTS - PART 1: CONCESSIONS |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| DEFSTAN 02-337(PT3)/1(2000) : 2000 | REQUIREMENTS FOR ELASTOMERIC TOROIDAL SEALING RINGS ('O' RINGS) - PART 3: ANTI-EXTRUSION RINGS (BACK UP RINGS) CATEGORY 2 |
| BS EN 62040-1 : 2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| DEFSTAN 08-130/3(2012) : 2012 | VISUAL AND SOUND SIGNALLING EQUIPMENT (INCLUDING NAVIGATION LIGHTS, ETC.) |
| BS EN 4704:2012 | Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| DEFSTAN 21-28(PT2)/2(2000) : 2000 | STANDARD FOR INTER-SYSTEM COMMUNICATIONS PROTOCOLS - PART 2: RULES AND PROTOCOLS FOR INTERCOMMUNICATION ACROSS DIGITAL HIGHWAYS |
| DEFSTAN 02-617/3(2004) : 2004 | DESIGN GUIDE AND REQUIREMENTS FOR EQUIPMENT TO ACHIEVE A LOW MAGNETIC SIGNATURE |
| BS 3G 198-2:1997 | Sleeves for aircraft electric cables and equipment wires Specification for slip-on sleeves for identification purposes |
| DEFSTAN 02-772/1(2007) : 2007 | WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| BS EN 60352-1:1998 | Solderless connections Wrapped connections. General requirements, test methods and practical guidance |
| IEC 62595-1-1:2013 | LCD backlight unit - Part 1-1: Generic specification |
| DEFSTAN 02-729(PT3)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 3: EDDY CURRENT |
| BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
| DEFSTAN 02-713/3(2012) : 2012 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| DEFSTAN 00-56(PT1)/4(2007) : 2007 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS |
| IEC 62444:2010 | Cable glands for electrical installations |
| BS 2059:1953 | Specification for straight-sided splines and serrations |
| DEFSTAN 08-204(PT3)/1(2010) : 2010 | REQUIREMENTS FOR DAMAGE CONTROL AND FIRE PROTECTION FOR THE SAFETY OF HM SURFACE SHIPS AND SUBMARINES - PART 3: HM SURFACE SHIPS AND SUBMARINE EQUIPMENT |
| BS EN ISO 3266 : 2010 | FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| BS ISO 3601-2:2016 | Fluid power systems. O-rings Housing dimensions for general applications |
| DEFSTAN 60-1(PT1)/3(1998) : 1998 CORR 1998 | CABLES, FIBRE OPTIC - PART 1: EQUIPMENT CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS |
| STANAG 3150 : 2004 | CODIFICATION - UNIFORM SYSTEM OF SUPPLY CLASSIFICATION |
| DEFSTAN 02-337(PT2)/1(2000) : 2000 | REQUIREMENTS FOR ELASTOMERIC TOROIDAL SEALING RINGS ('O' RINGS) - PART 2: LIST OF PREFERRED ELASTOMERIC TOROIDAL SEALING RINGS ('O' RINGS) CATEGORY 2 |
| BS ISO 6194-3:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Storage, handling and installation |
| DEFSTAN 00-101(PT2)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES |
| BS 2769-1:1984 | Hand-held electric motor-operated tools Specification for general requirements |
| DEFSTAN 05-10(PT3)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 3: PRODUCT DEFINITION INFORMATION GUIDANCE |
| BS EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators |
| DEFSTAN 21-13(PT3)/1(2000) : 2000 | COMBAT SYSTEM INTERFACE AND LINK DOCUMENTATION - PART 3: LINK DOCUMENT GUIDE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.