• DIN 56950-1 E : 2012

    Current The latest, up-to-date edition.

    ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTION

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2012

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Hazards
    5 Design requirements
    6 Safeguarding hazardous areas
    7 Electrical equipment and control systems
    8 Information for use
    9 Testing prior to commissioning
    Annex A (normative) - Checklist for visual and
            functional checks
    Annex B (normative) - Examples of hazards, hazardous
            situations and hazardous events associated with
            machinery installations as in this standard
    Annex C (normative) - Designing safeguards on the
            basis of risk assessment
    Annex D (informative) - Examples of using the risk graphs
    Bibliography

    Abstract - (Show below) - (Hide below)

    Applicable to machinery and machinery installations used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short).

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes DIN 56950 E. (08/2013)
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    CEN Guide 414:2017 Safety of machinery - Rules for the drafting and presentation of safety standards
    VDE 0113-11 : 2001 COR 1 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C AND NOT EXCEEDING 36 KV
    DIN EN 60947-4-1 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 + A1:2012)
    DIN VDE 0100-534 : 2016-10 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES (IEC 60364-5-53:2001/A2:2015, MODIFIED)
    DIN 685-5:1981-11 ROUND STEEL LINK CHAINS; UTILIZATION
    DIN 15061-1:1977-08 LIFTING APPLIANCES; GROOVE PROFILES FOR WIRE ROPE SHEAVES
    DIN EN 50310 : 2017 TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
    VDE 0113-50 : 2016-5 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005 + A1:2012 + A2:2015)
    VDE 0660-600-1 : 2012-06 NIEDERSPANNUNGS-SCHALTGERAETEKOMBINATIONEN - TEIL 1: ALLGEMEINE FESTLEGUNGEN (IEC 61439-1:2011)
    VDE 0845-4-2 : 2002 LIGHTNING PROTECTION - TELECOMMUNICATION LINES - LINES USING METALLIC CONDUCTORS
    DIN EN 60034-1 : 2011 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
    VDE 0100-718 : 2014 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES
    DIN EN 81346-1:2010-05 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 1: BASIC RULES
    VDE 0660-102 : 2014 NIEDERSPANNUNGSSCHALTGERAETE - TEIL 4-1: SCHUETZE UND MOTORSTARTER - ELEKTROMECHANISCHE SCHUETZE UND MOTORSTARTER (IEC 60947-4-1:2009 + A1:2012)
    DIN VDE 0100-706:2007-10 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-706: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONDUCTING LOCATIONS WITH RESTRICTED MOVEMENT
    VDE 0039 : 2001 PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
    BGG 912 : 2009 PRUEFUNG MASCHINENTECHNISCHER EINRICHTUNGEN IN BUEHNEN UND STUDIOS
    DIN EN 13411-6 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    DIN EN 60204-1 : 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    VDE 0839-6-2 : 2006 COR 1 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC STANDARDS; IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
    DIN EN 13411-5 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    DIN EN 13411-2 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
    DIN EN 62079 : 2001 PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
    VDE 0100-534 : 2016-10 Low-voltage electrical installations Part 5-53: Selection and erection of electrical equipment – Isolation, switching and control – Clause 534: Devices for protection against transient overvoltages
    VDE 0411-500 : 2008 COR 1 2009 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
    BGI 575 : 2003 AUSWAHL UND ANBRINGUNG ELEKTROMECHANISCHER VERRIEGELUNGSEINRICHTUNGEN FUER SICHERHEITSFUNKTIONEN
    DIN EN 61439-1 : 2012-06 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    VDE 0108-100 : 2005-01 EMERGENCY ESCAPE LIGHTING SYSTEMS
    DIN EN 50172 : 2005-01 EMERGENCY ESCAPE LIGHTING SYSTEMS
    DIN VDE 0100-718 : 2014 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-718: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - COMMUNAL FACILITIES AND WORKPLACES
    DIN 43148:1986-11 WEDGE CLAMPS FOR OVERHEAD EQUIPMENT
    DIN EN 50122-1 : 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
    DIN EN 61663-2 : 2002 LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 2: LINES USING METALLIC CONDUCTORS
    VDE 0100-706:2007-10 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-706: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONDUCTING LOCATIONS WITH RESTRICTED MOVEMENT
    DIN 31000;VDE 1000:1979-03 GENERAL PRINCIPLES FOR THE SAFETY DESIGN OF TECHNICAL PRODUCTS
    DIN EN 13411-3 E : 2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING
    DIN 56921-1:2010-03 Entertainment technology - Flying systems - Part 1: Manual counterweight flying systems for total loading up to 500 kg
    DIN 56920-3:1970-07 ENTERTAINMENT TECHNOLOGY - TERMS FOR STAGE EQUIPMENT
    VDE 0839-6-4 : 2011 ELEKTROMAGNETISCHE VERTRAEGLICHKEIT (EMV) - TEIL 6-4: FACHGRUNDNORMEN - STOERAUSSENDUNG FUER INDUSTRIEBEREICHE
    VDE 0115-3 : 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
    DIN EN 13411-7 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
    DIN EN 60204-11 : 2001 COR 1 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C AND NOT EXCEEDING 36 KV
    DIN 3089-2:1984-04 STEEL WIRE ROPES - SPLICES - LONG SPLICE
    VDE 0845-4-1 : 2000 LIGHTING PROTECTION - TELECOMMUNICATION LINES - FIBRE OPTIC INSTALLATIONS A FIBRES OPTIQUES
    DIN EN 60529 : 2014-09 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013)
    VDE 0113-1 : 2007 COR 1 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    DIN EN 62061 : 2016 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005 + A1:2012 + A2:2015)
    DIN EN 61000-6-4 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    DIN 15061-2:1977-08 CRANES; GROOVE PROFILES FOR WIRE ROPE DRUMS
    VDE 0530-1 : 2011 Rotating electrical machines Part 1: Rating and performance (IEC 60034-1:2010, modified);
    VDE 0800-2-310 : 2017 TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
    ISO 4301-1:2016 Cranes — Classification — Part 1: General
    DIN EN 61095 : 2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    VDE 0113-32 : 2009-03 SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
    DIN EN 61131-1:2004-03 PROGRAMMABLE CONTROLLERS - PART 1: GENERAL INFORMATION
    BGV C 1 : 1998 VERANSTALTUNGS- UND PRODUKTIONSSTAETTEN FUER SZENISCHE DARSTELLUNG
    VDE 0637-3 : 2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    VDE 0100-540 : 2012-06 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011)
    DIN EN 61131-2 : 2008 COR 1 2009 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
    DIN EN 60204-32 : 2009-03 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
    DIN 15020-1 E : 1974 LIFTING APPLIANCES; PRINCIPLES RELATING TO ROPE DRIVES; CALCULATION AND CONSTRUCTION
    VDE 1000:2017-04 GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS
    DIN EN 61663-1 : 2000 LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 1: FIBRE OPTIC INSTALLATIONS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective