DIN EN 50018 : 2001 AMD 1 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
01-12-2004
12-01-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Gruppen und Temperaturklassen elektrischer
Betriebsmittel
BESONDERE BAUANFORDERUNGEN
5 Zünddurchschlagsichere Spalte
6 Verklebte Spalte
7 Betätigungsteile
8 Ergänzende Anforderungen für Wellen und Lager
9 Lichtdurchlässige Teile
10 Atmungs- und Entwässerungseinrichtungen, die Teil
eines druckfesten Gehäuses sind
11 Verschlüsse, zugehörige Bohrungen und
Verschlusselemente
12 Werkstoffe und mechanische Festigkeit von Gehäusen;
Werkstoffe im Innern von Gehäusen
13 Einführungen in druckfeste Gehäuse
PRÜFUNGEN
14 Allgemeines
15 Typprüfungen
16 Stückprüfungen
ANDERE ANFORDERUNGEN
17 Schaltgeräte
18 Lampenfassungen und Lampensockel
19 Nichtmetallische Gehäuse und nichtmetallische
Teile von Gehäusen
20 Druckmesswandler mit Kapillaren
Anhang A (normativ) Zusätzliche Anforderungen an
Elemente aus umgefalzten Bändern von Atmungs-
und Entwässerungseinrichtungen
Anhang B (normativ) Zusätzliche Anforderungen an
Elemente mit nicht messbaren Spalten von
Atmungs- und Entwässerungseinrichtungen
Anhang C (normativ) Zusätzliche Anforderungen an
druckfeste Kabel- und Leitungseinführungen
Anhang D (normativ) Zusätzliche Anforderungen an
druckfeste Leergehäuse der Gruppen I, IIA und
IIB, um als Ex-Komponente bescheinigt zu
werden und Anwendung solcher Ex
Komponentenbescheinigungen zum Erhalt von
Gesamtbescheinigungen
Defines the specific requirements for the construction and testing of electrical apparatus with type of protection flameproof enclosure 'd' meant for use in potentially explosive atmospheres.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 50018:2001 | Identical |
| SN EN 50018 : 2000 AMD 1 2002 | Identical |
| NBN EN 50018 : 2001 | Identical |
| EN 50018 : 2000 AMD 1 2002 | Identical |
| NEN EN 50018 : 2000 AMD 1 2002 | Identical |
| NF EN 50018 : 2004 AMD 1 2004 | Identical |
| VDE 0170-5 : 2015-04 | Corresponds |
| BS EN 50018:2000 | Identical |
| VDE 0101 : 2000 | POWER INSTALLATIONS EXCEEDING 1 KV |
| DIN 57166 : 1981 | ELECTRICAL INSTALLATIONS AND EQUIPMENT FOR USE IN ATMOSPHERES POTENTIALLY ENDANGERED BY EXPLOSIVE MATERIAL |
| VDE 0400-40-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| VDE 0400-6 : 2000 | GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES |
| VDE 0170/0171-3 : 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P" |
| VDE 0165-10 : 1999 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES) |
| DIN 40012-1:1984-05 | PROTECTION AGAINST EXPLOSION - MARKING OF ELECTRICAL EQUIPMENT - SIGNS AND PLATES |
| DIN EN 61779-1 : 2001 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN 50073 : 2000 | GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES OR OXYGEN |
| VDI/VDE 2189 Blatt 3:1994-10 | Three-level stepping controllers - Methods of evaluation the performance |
| VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
| VDE 0170-12-2 : 2001-05 | GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| DIN EN 50303 : 2001-05 | GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST |
| VDE 0166 : 81 AMD 1 87 | ELECTRICAL INSTALLATIONS AND APPARATUS THEREOF FOR USE IN ATMOSPHERES POTENTIALLY ENDANGERED BY EXPLOSIVE MATERIAL |
| DIN EN 50241-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| VDE 0118 SUPP 1 : 1998 | ERECTION OF ELECTRICAL INSTALLATIONS IN MINES - GUIDE FOR THE PREPARATION OF A TECHNICAL DOCUMENTATION IN THE SENSE OF THE MACHINE DIRECTIVE |
| DIN 42673-3:1983-04 | TOTALLY ENCLOSED FAN-COOLED THREE-PHASE INDUCTION MOTORS WITH SQUIRREL-CAGE, TYPE IM B 3, WITH ROLLING BEARINGS - RELATIONSHIP FRAME SIZES - OUTPUT RATING FOR TYPE OF PROTECTION FLAMEPROOF ENCLOSURE "D" |
| DIN 42677-3:1983-04 | TOTALLY ENCLOSED FAN-COOLED THREE-PHASE INDUCTION MOTORS WITH SQUIRREL-CAGE, TYPE IM B 5, IM B 10, IM B 14, WITH ROLLING BEARINGS - RELATIONSHIP FRAME SIZES - OUTPUT RATINGS FOR TYPE OF PROTECTION FLAMEPROOF ENCLOSURE "D" |
| DIN EN 50284 : 2000 | SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP II, CATEGORY 1 G |
| ISO 2738:1999 | Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity |
| EN 50039:1980 | Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i' |
| HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN EN 60061-2:2017-10 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 2: LAMPHOLDERS (IEC 60061-2:1969 + SUPPLEMENTS A:1970 TO S:1997 + A18:1998 TO A50:2015 + A51:2016, MODIFIED) |
| DIN 1338:2011-03 | Writing and typesetting of formulae |
| EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
| DIN EN 60061-1:2017-10 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMP CAPS (IEC 60061-1:1969 + SUPPLEMENTS A:1970 TO V:1997 + A21:1998 TO A54:2016 + A55:2016, MODIFIED) |
| ISO 4003:1977 | Permeable sintered metal materials — Determination of bubble test pore size |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| EN 50019:2000/corrigendum Apr. 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| VDE 0170-6 : 2016 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
| VDE 0471-11-10 : 2014 COR 1 2015 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013) |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN EN 50039 : 1982 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSICALLY SAFE ELECTRICAL SYSTEMS "I" |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| DIN EN 50019 : 2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| VDE 0170-7 : 2012 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I" (IEC 60079-11:2011 + COR.:2012) |
| VDE 0170/0171-10 : 1982 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSICALLY SAFE ELECTRICAL SYSTEMS "I" |
| ISO 4022:1987 | Permeable sintered metal materials — Determination of fluid permeability |
| ISO 1210:1992 | Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| DIN ISO 965-1:2017-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013) |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| DIN ISO 4003:1990-10 | PERMEABLE SINTERED METAL MATERIALS - DETERMINATION OF BUBBLE TEST PORE SIZE |
| DIN EN 60529 : 2014-09 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013) |
| ISO 185:2005 | Grey cast irons Classification |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| DIN EN 50020 : 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSIC SAFETY 'I' |
| DIN VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| DIN EN 10002-1:2001-12 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| DIN IEC 60112 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN ISO 4022:1990-10 | PERMEABLE SINTERED METAL MATERIALS - DETERMINATION OF FLUID PERMEABILITY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.