BS 546:1950
|
Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors |
IEC 60364-4-43:2008
|
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
IEC 60364-7-712:2017
|
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
IEC 60702-1:2002+AMD1:2015 CSV
|
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables |
HD 60364-4-43:2010
|
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
EN 60598-2-13:2006/A2:2016
|
LUMINAIRES - PART 2-13: PARTICULAR REQUIREMENTS - GROUND RECESSED LUMINAIRES (IEC 60598-2-13:2006/A2:2016) |
IEC 60364-7-717:2009
|
Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units |
EN 61048:2006/A1:2016
|
AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015) |
EN 60702-1:2002/A1:2015
|
MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES (IEC 60702-1:2002/A1:2015) |
IEC 60050-195:1998
|
International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
IEC 61048:2006+AMD1:2015 CSV
|
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 60331-11:1999+AMD1:2009 CSV
|
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
HD 60364-4-42 : 2011 AMD 1 2015
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014) |
BS 1363-2(1995) : 1995
|
13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
IEC 60670-21:2004+AMD1:2016 CSV
|
Boxes and enclosures for electrical accessories for household andsimilar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspensionmeans |
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV
|
Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
IEC 60050-845:1987
|
International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
HD 60364-4-41:2017/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
BS 7001:1988
|
Specification for interchangeability and safety of a standardized luminaire supporting coupler |
IEC 61347-1:2015 RLV
|
Lamp controlgear - Part 1: General and safety requirements |
BS 6972:1988
|
Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use |
IEC 60570:2003+AMD1:2017 CSV
|
Electrical supply track systems for luminaires |
ISO 8528-12:1997
|
Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services |
IEC 61558-2-6:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
IEC 60332-1-1:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus |
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
IEC 60332-1-2:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
BS EN 60309-2 : 1999
|
PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES |
HD 60364-1:2008/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS |
DIN VDE 0710-14 : 1982
|
LUMINAIRES WITH OPERATING VOLTAGES BELOW 1000 V; LUMINAIRES FOR BUILDING-IN INTO FURNITURE |
IEC 60364-4-44:2007+AMD1:2015 CSV
|
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
IEC 60598-2-13:2006+AMD1:2011+AMD2:2016 CSV
|
Luminaires - Part 2-13: Particular requirements - Ground recessedluminaires |
IEC 60598-1:2014+AMD1:2017 CSV
|
Luminaires - Part 1: General requirements and tests |
BS 1363-4(1995) : 1995
|
13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
HD 60364-7-712:2016
|
Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
IEC 60331-21:1999
|
Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
BS EN 50438:2013 (published 2015-06)
|
Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks |
IEC 60598-2-22:2014+AMD1:2017 CSV
|
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
IEC 61535:2009+AMD1:2012 CSV
|
Installation couplers intended for permanent connection in fixedinstallations |
IEC 60050-826:2004
|
International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
IEC 60598-2-24:2013
|
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
IEC 61557-12:2007
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
EN 61535:2009/A1:2013
|
INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012) |
EN 60670-21 : 2007
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 60155:1993
|
Glow-starters for fluorescent lamps |
IEC 60598-2-14:2009
|
Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment |
IEC 60364-4-42:2010+AMD1:2014 CSV
|
Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
HD 60364-7-717:2010/AC:2014
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
EN 60598-2-22:2014/AC:2016-09
|
LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING (IEC 60598-2-22:2014/COR2:2016) |
IEC 60702-2:2002+AMD1:2015 CSV
|
Mineral insulated cables and their terminations with a rated voltagenot exceeding 750 V - Part 2: Terminations |
EN 60702-2:2002/A1:2015
|
MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS (IEC 60702-2:2002/A1:2015) |
IEC 60364-5-52:2009
|
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |