NEMA TP 1-2002
|
GUIDE FOR DETERMINING ENERGY EFFICIENCY FOR DISTRIBUTION TRANSFORMERS |
NEMA HP 100.4 : 1991(R2010)
|
HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ECTFE FLUOROPOLYMERS |
IEEE 519-2014 REDLINE
|
IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems |
NEMA TR1 : 2013
|
TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS |
IEEE C37.20 : 69(R1981)
|
SWITCH GEAR ASSEMBLIES AND METAL-ENCLOSED BUS |
IEEE C37.14-2015 REDLINE
|
IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures |
IEEE C37.20.1-2015 REDLINE
|
IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
IEEE 525-2007
|
IEEE Guide for the Design and Installation of Cable Systems in Substations |
NEMA WC 74 : 2012
|
5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
NEMA BU 1.1:2010
|
General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less |
IEEE C37.95-2014
|
IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
FIPS PUB 94 : 0
|
GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS |
IEEE 3007.2 : 2010
|
This recommended practice covers the maintenance of industrial and commercial power systems. |
IEEE/ANSI C57.12.22-1995
|
American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below |
IEEE C57.12.01-2015 REDLINE
|
IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
UL 1072:4ED 2006-06
|
Medium-Voltage Power Cables |
NFPA 110 : 2016
|
EMERGENCY AND STANDBY POWER SYSTEMS |
NEMA WC 70 : 2009
|
POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY |
IEEE 142-2007
|
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems |
IEEE 386-2016 REDLINE
|
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV |
UL 977:5ED 2012-04
|
Fused Power-Circuit Devices |
ANSI C57.12.25 : 1990
|
TRANSFORMERS - PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF-COOLED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS; HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 240/120 VOLTS; 167 KVA AND SMALLER - REQUIREMENTS |
IEEE C37.20.2-2015
|
IEEE Standard for Metal-Clad Switchgear |
NEMA HP 100.2 : 1991(R2010)
|
HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROPOLYMERS |
ANSI/NEMA FB 11-2000
|
PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS |
UL 83:16ED 2017-07
|
Standard for Thermoplastic-Insulated Wires and Cables |
UL 1008:8ED 2014-12
|
Transfer Switch Equipment |
IEEE 592-2007 REDLINE
|
IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors |
IEEE C57.12.24-2009
|
IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below |
IEEE C57.12.00-2015
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE C57.91-2011 REDLINE
|
IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
NEMA WC 55 : 1992(R1999)
|
INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
IEEE 386-2006
|
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V |
NEMA WC 57 : 2014
|
CONTROL, THERMOCOUPLE EXTENSION, AND INSTRUMENTATION CABLES |
IEEE C57.96-2013
|
IEEE Guide for Loading Dry-Type Distribution and Power Transformers |
UL 1066 : 4
|
LOW-VOLTAGE AC AND DC POWER CIRCUIT BREAKERS USED IN ENCLOSURES |
ANSI/NEMA PB 2.1:2013
|
General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less |
IEEE C57.12.90-2010
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
NEMA HP 100.3 : 1991(R2010)
|
HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH CROSS-LINKED (THERMOSET) POLYOLEFIN (XLPO) |
UL 857:13ED 2009-03
|
Busways |
IEEE 835-1994
|
IEEE Standard Power Cable Ampacity Tables |
NEMA HP 100:1991(R2010)
|
High-Temperature Instrumentation and Control Cables |
IEEE C37.20.3-2013 REDLINE
|
IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
IEEE 242 : 2001
|
PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE C37.010-1999
|
IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
ANSI C57.12.52 : 2012
|
Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements |
IEEE C37.13-2015 REDLINE
|
IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
IEEE C2-2017
|
NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
IEEE 48-2009 REDLINE
|
IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV |
NFPA 70E : 2018
|
ELECTRICAL SAFETY IN THE WORKPLACE |
IEEE 142 : 2007
|
GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE C57.12.51-2008
|
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
IEEE C37.011-2011 REDLINE
|
IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
IEEE C57.12.20-2011 REDLINE
|
IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below |
NEMA HP 100.1 : 1991(R2010)
|
HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS |
IEEE C37.012-2014
|
IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
IEEE C37.20.7-2007 REDLINE
|
IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
NEMA ICS 1 : 2000(R2015)
|
INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS |
IEEE C37.24-2003
|
IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
IEEE C37.16-2009 REDLINE
|
IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below)and DC (3200 V and below) Power Circuit Breakers |
IEEE 404-2012
|
IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV |
UL 13:4ED 2015-03
|
Power-Limited Circuit Cables |
NEMA PB 2:2011
|
Deadfront Distribution Switchboards |
IEEE 1215-2013
|
IEEE Guide for the Application of Separable Insulated Connectors |
IEEE C57.12.23-2009
|
IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below |
IEEE C57.12.40-2011
|
IEEE Standard for Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 and Below; Low Voltage, 600 V and Below; Subway and Vault Types (Liquid Immersed) |
NEMA ICS 2:2008
|
Controllers, Contactors and Overload Relays Rated 600 V |
IEEE C37.23-2003
|
IEEE Standard for Metal-Enclosed Bus |
IEEE C57.12.10-2010 REDLINE
|
IEEE Standard Requirements for Liquid-Immersed Power Transformers |
IEEE 515-2011
|
IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
IEEE 400-2012 REDLINE
|
IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above |
ANSI/NEMA WC 71/ICEA S-96-659:2014
|
Standard for Nonshielded Cables Rated 2001-5000 V for Use in the Distribution of Electric Energy |
IEEE C37.04-1999
|
IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
IEEE C37.06-2009
|
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V |
IEEE 575-2014
|
IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
IEEE 141 : 1993
|
IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE 3004.1-2013
|
IEEE Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power Systems |
IEEE C57.110-2008 REDLINE
|
IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents |
NEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999)
|
AMPACITIES INCLUDING EFFECT OF SHIELD LOSSES FOR SINGLE-CONDUCTOR SOLID-DIELECTRIC POWER CABLE, 15 KV THROUGH 69 KV (COPPER AND ALUMINUM CONDUCTORS) |
ANSI C57.12.57 : 1987
|
AMERICAN NATIONAL STANDARD FOR TRANSFORMERS - VENTILATED DRY-TYPE NETWORK TRANSFORMERS 2500 KVA AND BELOW, THREE-PHASE, WITH HIGH-VOLTAGE 34500 VOLTS AND BELOW, LOW-VOLTAGE 216Y/125 AND 480Y/227 VOLTS - REQUIREMENTS |