• ISO 19372:2015

    Current The latest, up-to-date edition.

    Microturbines applications — Safety

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  13-02-2015

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 19372:2015 covers the safety requirements for industrial, commercial, and residential automated stationary microturbine (micro gas turbine) engine generator assemblies with an individual system or subsystem output rating with nominal supply voltages not exceeding 1 000 V for alternating current (A.C.) and not exceeding 1 500 V for direct current (D.C.), 500 kW per individual unit/subsystem or less that are intended for installation and use in ordinary and hazardous location using liquid or gaseous fuels and the safety related control and detection systems and essential auxiliaries for all types of open cycles, closed-cycle, and semi-closed (simple, combined, regenerative, reheat, etc.) used in onshore and offshore applications including floating production platforms.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 19372. (02/2015)
    Document Type Standard
    Product Note THIS STANDARD ALSO REFERS TO EN 14461
    Publisher International Organization for Standardization
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61025:2006 Fault tree analysis (FTA)
    AGMA 6023 : A DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    ISO 12499:1999 Industrial fans Mechanical safety of fans Guarding
    ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
    IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
    NFPA 2001 : 2015 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
    NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
    ISO 9972:2015 Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
    AGMA 6011 : I SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
    ISO 6183:2009 Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation
    IEC TR 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
    IEC 60034-22:2009 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
    IEC 60695-1-1:1999 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
    IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
    ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
    IEC 60079-19:2010+AMD1:2015 CSV Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
    ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
    IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    ISO 11086:1996 Gas turbines — Vocabulary
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    NFPA 101 : 2018 LIFE SAFETY CODE
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    UL 2200:2ED 2012-06 Standard for Stationary Engine Generator Assemblies
    IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
    ISO 3977-9:1999 Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
    ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
    ANSI B11 : 2008 GENERAL SAFETY REQUIREMENTS COMMON TO ANSI B11 MACHINES
    ISO 14123-1:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
    ISO 16010:2005 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
    EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
    IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
    ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
    IEC 60730-2-14:2017 Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    IEC 62305-1:2010 Protection against lightning - Part 1: General principles
    NFPA 15 : 2017 WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
    ISO/TR 13387-7:1999 Fire safety engineering Part 7: Detection, activation and suppression
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    NFPA 68 : 2013 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
    EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
    IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
    CEN/TS 14816:2008 Fixed firefighting systems - Water spray systems - Design, installation and maintenance
    IEC 60079-29-2:2015 RLV Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    NFPA 12 : 2015 CARBON DIOXIDE EXTINGUISHING SYSTEMS
    ISO 14001:2015 Environmental management systems — Requirements with guidance for use
    EN 50272-2:2001 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
    ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
    ISO 9001:2015 Quality management systems — Requirements
    ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
    NFPA 13 : 2016 INSTALLATION OF SPRINKLER SYSTEMS
    ISO 14520-1:2015 Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
    ISO 3864-3:2012 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
    ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
    IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    ISO 13732-3:2005 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
    ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
    IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN 1838:2013 Lighting applications - Emergency lighting
    ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
    ISO 19353:2015 Safety of machinery Fire prevention and fire protection
    IEC TR 61000-5-1:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication
    NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective