ISO 186:2002
Current
Current
The latest, up-to-date edition.
Paper and board — Sampling to determine average quality
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
14-03-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Iinternational Standard specifies a method of obtaining a representative sample from a lot of paper or board, including solid and corrugated fibreboard (see ISO 4046:1978), for testing to determine whether or not its average quality complies with set specifications.
It defines the conditions which apply when sampling is carried out to resolve disputes between buyer and seller relating to a defined lot of paper or board, which has been or is being delivered.
NOTE If less than 50 % of the lot is available for sampling, then sampling in terms of this International Standard will be invalid in the absence of agreement to the contrary.
The method is unsuitable for determining the variability within a lot.
In cases where International Standards make reference to sampling according to this standard but where such sampling is impossible, impractical or inappropriate, and where no dispute is involved, guidance is given in normative annex A.
| Committee |
ISO/TC 6/SC 2
|
| DevelopmentNote |
Supersedes ISO/FDIS 186 (04/2002)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 186:2002-08 | Identical |
| NS EN ISO 186 : 2ED 2002 | Identical |
| I.S. EN ISO 186:2002 | Identical |
| PN EN ISO 186 : 2004 | Identical |
| AS/NZS 1301.417s:2014 | Identical |
| SN EN ISO 186 : 2002 | Identical |
| UNI EN ISO 186 : 2003 | Identical |
| SS-EN ISO 186 : 2002 | Identical |
| BIS IS 1060-5-1 : 2014 | Identical |
| UNE-EN ISO 186:2002 | Identical |
| BS EN ISO 186:2002 | Identical |
| EN ISO 186:2002 | Identical |
| NF EN ISO 186 : 2002 | Identical |
| NBN EN 234 : 1991 COR 1997 | Identical |
| NBN EN 20535 : 1995 | Identical |
| NBN EN 21974 : 1995 | Identical |
| NBN EN 23035 : 1995 | Identical |
| NBN EN 24567 : 1992 | Identical |
| NBN EN 27023 : 1993 | Identical |
| NBN EN ISO 186 : 2002 | Identical |
| NEN EN ISO 186 : 2002 | Identical |
| DIN ISO 186:1982-09 | Identical |
| BS 3430(1995) : 1995 AMD 9159 | Identical |
| UNI 6436 : 1986 | Similar to |
| UNE 57002:1988 | Identical |
| DIN EN ISO 9073-5:2009-01 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| DIN ISO 16260:2016-10 (Draft) | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| NF ISO 2493-1 : 2011 | PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
| ISO 9895:2008 | Paper and board — Compressive strength — Short-span test |
| I.S. EN ISO 12625-12:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| BS 7304-1(1990) : 1990 AMD 7008 | METHODS OF TEST FOR NONWOVENS - DETERMINATION OF MASS PER UNIT AREA |
| BS ISO 20494:2017 | Paper. Requirements for stability for general graphic applications |
| 05/30103541 DC : DRAFT MAY 2005 | ISO 22891 - PAPER - DETERMINATION OF TRANSMITTANCE BY DIFFUSE REFLECTANCE MEASUREMENT |
| 15/30302582 DC : 0 | BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) |
| 16/30325728 DC : 0 | BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) |
| 14/30287209 DC : 0 | BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) |
| BS EN 60641-2:2004 | Pressboard and presspaper for electrical purposes Methods of tests |
| NF ISO 16532-3 : 2010 | PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| 03/312214 DC : DRAFT AUG 2003 | EN 1104 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| 11/30247446 DC : 0 | BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| 07/30164326 DC : 0 | BS ISO 16532-1 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: GREASE PERMEABILITY METHOD |
| 09/30210529 DC : 0 | BS ISO 12625-13 - TISSUE PAPER AND TISSUE PRODUCTS - PART 13: DETERMINATION OF THE SPECTRAL REFLECTANCE FACTOR (BRIGHTNESS) AT THE WAVELENGTH R 457 NM WITH AND WITHOUT UV STIMULUS AND OPACITY |
| ASTM D 585 : 1997 : R2007 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product (Withdrawn 2010) |
| ISO 13821:2002 | Corrugated fibreboard Determination of edgewise crush resistance Waxed edge method |
| UNI ISO 12830 : 2012 | PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM |
| DIN 53113:1990-06 | DETERMINING THE BURSTING STRENGTH OF PAPER |
| BS ISO 16532-3:2010 | Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers |
| BS ISO 11480:2017 | Pulp, paper and board. Determination of total chlorine and organically bound chlorine |
| 14/30287212 DC : 0 | BS ISO 11475 - PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| BS ISO 3781:2011 | Paper and board. Determination of tensile strength after immersion in water |
| BS ISO 16260:2016 | Paper and board. Determination of internal bond strength |
| 11/30253304 DC : 0 | BS ISO 6588-1 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION |
| 16/30325910 DC : 0 | BS EN 233 - WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS |
| UNI ISO 11108 : 2011 | INFORMATION AND DOCUMENTATION - ARCHIVAL PAPER - REQUIREMENTS FOR PERMANENCE AND DURABILITY |
| NF ISO 29681 : 2010 | PAPER, BOARD AND PULPS - DETERMINATION OF PH OF SALTED WATER EXTRACTS |
| BS ISO 11556:2005 | Paper and board. Determination of curl using a single vertically suspended test piece |
| BS ISO 8791-2:2013 | Paper and board. Determination of roughness/smoothness (air leak methods) Bendtsen method |
| BS EN 60819-2:2002 | Non-cellulosic papers for electrical purposes Methods of test |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS ISO 2470-2:2008 | Paper, board and pulps. Measurement of diffuse blue reflectance factor Outdoor daylight conditions (D65 brightness) |
| EN ISO 638:2008 | Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008) |
| 16/30325457 DC : 0 | BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
| BS ISO 3783:2006 | Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model) |
| 16/30325454 DC : 0 | BS EN ISO 287 - PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN-DRYING METHOD |
| 02/704679 DC : DRAFT MAY 2002 | PREN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| DIN ISO 3039:2011-06 | Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010) |
| ISO 29681:2009 | Paper, board and pulps Determination of pH of salted water extracts |
| 99/123128 DC : DRAFT SEP 99 | ISO/DIS 11607 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES |
| DIN EN 16453:2014-06 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| 12/30242237 DC : 0 | BS ISO 8791-2 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
| BS ISO 16945:2014 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| 17/30351717 DC : 0 | BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS ISO 15994:2005 | Graphic technology. Testing of prints. Visual lustre |
| ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| BS EN ISO 9073-5:2008 | Textiles. Test methods for nonwovens Determination of resistance to mechanical penetration (ball burst procedure) |
| DIN ISO 1924-3:2007-06 | Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005) |
| 10/30202469 DC : 0 | BS ISO 12192 - PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD |
| BS EN ISO 12625-11:2012 | Tissue paper and tissue products Determination of wet ball burst strength |
| 09/30172818 DC : 0 | BS ISO 15320 - PAPER, BOARD AND PULPS - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
| DD ENV 12625-2:1999 | Tissue paper and tissue products Procedures for sampling and conditioning |
| BS 7304-3(1990) : 1990 AMD 7010 | METHODS OF TEST FOR NON-WOVENS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION |
| BS ISO 9073-6 : 2000 AMD 14899 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 6: ABSORPTION |
| UNI ISO 5636-5 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| BS ISO 14968:1999 | Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets |
| 07/30164319 DC : 0 | BS ISO 2470-2 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) |
| 09/30173892 DC : 0 | BS ISO 16532-3 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| I.S. EN 1104:2005 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFF - DETERMINATION OF TRANSFER OF ANTIMICROBIC CONSTITUENTS |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 12830:2011 | Paper, board and pulps Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| ISO 22414:2004 | Paper — Cut-size office paper — Measurement of edge quality |
| I.S. EN ISO 9073-18:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST |
| I.S. EN ISO 1974:2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012) |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| BIS IS/ISO 2470-2 : 2008 | PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) |
| I.S. EN ISO 3035:2011 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011) |
| PREN 646 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| ISO 5636-5:2013 | Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
| DIN EN 1230-2:2010-02 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| ISO 19594:2017 | Graphic technology Test method for the determination of the binding strength for perfect-bound products Page-pull test working upwards |
| DIN EN 646:2006-07 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| UNE-EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| 17/30345786 DC : 0 | BS EN 646 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
| 17/30333593 DC : 0 | BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING |
| ISO 3039:2010 | Corrugated fibreboard Determination of grammage of the component papers after separation |
| UNE-ISO 8787:2012 | Paper and board. Determination of capillary rise. Klemm method |
| ASTM D 585 : 1997 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| I.S. EN ISO 638:2008 | PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| ISO 2493-2:2011 | Paper and board Determination of bending resistance Part 2: Taber-type tester |
| ISO 3037:2013 | Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) |
| ISO 12625-7:2014 | Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) |
| EN 60819-2:2001 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test |
| DIN EN ISO 9073-9:2008-06 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT |
| EN ISO 12625-7:2014 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| BS EN 29073-1:1992 | Methods of test for nonwovens Methods of test for nonwovens. Determination of mass per unit area |
| BS EN ISO 12625-1:2011 | Tissue paper and tissue products General guidance on terms |
| BS EN ISO 15318:2000 | Pulp, paper and board. Determination of 7 specified polychlorinated biphenyls (PCB) |
| ISO 2759:2014 | Board — Determination of bursting strength |
| ISO 9073-5:2008 | Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure) |
| UNE-EN ISO 12625-1:2012 | Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011) |
| BS EN ISO 8254-1:2009 | Paper and board. Measurement of specular gloss 75 degree gloss with a converging beam, TAPPI method |
| UNE-EN ISO 12625-7:2015 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| BS EN ISO 9862:2005 | Geosynthetics. Sampling and preparation of test specimens |
| BS EN ISO 8254-2:2003 | Paper and board. Measurement of specular gloss 75° gloss with a parallel beam, DIN method |
| BS EN ISO 12625-4:2016 | Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| BS EN ISO 2759:2014 | Board. Determination of bursting strength |
| DIN 55468-2:1999-03 | CORRUGATED FIBREBOARD - PART 2: WET STRENGTH FIBREBOARD REQUIREMENTS AND TESTING |
| I.S. EN ISO 12625-9:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| EN 12281:2002 | Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| DIN EN ISO 9073-13:2007-05 | Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006) |
| ONORM EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| DIN ISO 5630-5:2017-03 | Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 ?C (ISO 5630-5:2008) |
| EN ISO 12625-5:2016 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| EN 12283:2002 | Printing and business paper - Determination of toner adhesion |
| EN 1230-1:2009 | Paper and board intended to come into contact with foodstuffs — Sensory analysis — Part 1: Odour |
| CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
| EN ISO 12625-6:2016 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| DIN EN ISO 534:2012-02 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| DIN EN ISO 9073-14:2007-05 | Textiles - Test methods for nonwovens - Part 14: Coverstock wetback (ISO 9073-14:2006) |
| EN ISO 12625-4:2016 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| I.S. EN ISO 9073-14:2007 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 14: COVERSTOCK WETBACK |
| ONORM EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| I.S. EN ISO 9073-13:2007 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 13: REPEATED LIQUID STRIKE-THROUGH TIME |
| ONORM EN ISO 535 : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| ONORM EN ISO 3037 : 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
| 04/30125003 DC : DRAFT NOV 2004 | IEC 60819-3-3 ED.2 - NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
| BS ISO 8791-3:2017 | Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method |
| 07/30130569 DC : 0 | BS ISO 22754 - PULP AND PAPER - DETERMINATION OF THE EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC NUMBER) BY INFRARED REFLECTANCE MEASUREMENT |
| ISO 3783:2006 | Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model) |
| BS 7304-4(1990) : AMD 7011 | METHODS OF TEST FOR NON-WOVENS - DETERMINATION OF TEAR RESISTANCE |
| BS ISO 13821:2001 | Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method |
| ISO 1924-3:2005 | Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) |
| UNE-ISO 6588-1:2013 | Paper, board and pulps. Determination of pH of aqueous extracts. Part 1: Cold extraction |
| I.S. EN ISO 9073-15:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY |
| 03/309374 DC : DRAFT JUNE 2003 | ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| 15/30274545 DC : 0 | BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
| NF EN ISO 287 : 2009 | PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN-DRYING METHOD |
| BS ISO 8784-1:2014 | Pulp, paper and board. Microbiological examination Enumeration of bacteria and bacterial spores based on disintegration |
| ISO 2470:1999 | Paper, board and pulps Measurement of diffuse blue reflectance factor (ISO brightness) |
| BS ISO 5626:1993 | Paper. Determination of folding endurance |
| 15/30323953 DC : 0 | BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| 15/30323949 DC : 0 | BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
| BS ISO 9416:2017 | Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| DIN EN ISO 3035:2012-02 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| NF EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| BS EN ISO 1974:2012 | Paper. Determination of tearing resistance. Elmendorf method |
| BS ISO 11108:1996 | Information and documentation. Archival paper. Requirements for permanence and durability |
| ISO 15994:2005 | Graphic technology Testing of prints Visual lustre |
| BS EN ISO 12625-12:2010 | Tissue paper and tissue products Determination of tensile strength of perforated lines. Calculation of perforation efficiency |
| BS EN ISO 12625-16:2015 | Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method |
| BS ISO 16762:2016 | Graphic technology. Post-press. General requirements for transfer, handling and storage |
| DIN ISO 16260 E : 2017 | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| BS EN 1104:2005 | Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents |
| BS ISO 778:2005 | Paper, board and pulp. Determination of acid-soluble copper |
| DIN EN ISO 11607-2:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006 + AMD 1.:2014) |
| I.S. EN ISO 535:2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| 05/30103535 DC : DRAFT MAY 2005 | ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR |
| UNE-ISO 15754:2012 | Paper and board - Determination of z-directional tensile strength |
| UNE-ISO 12192:2017 | Paper and board. Determination of compressive strength. Ring crush method |
| 09/30207367 DC : 0 | BS ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL PRINCIPLES FOR THE USE OF TERMS |
| BS EN ISO 9073-15:2008 | Textiles. Test methods for nonwovens Determination of air permeability |
| DIN EN ISO 12625-15:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| BS ISO 11476:2010 | Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions) |
| 10/30202472 DC : 0 | BS ISO 3035 - CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| DIN ISO 11476:2017-10 | PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016) |
| BS ISO 12192:2011 | Paper and board. Determination of compressive strength. Ring crush method |
| BS ISO 5636-4:2013 | Paper and board. Determination of air permeance (medium range) Sheffield method |
| 07/30169952 DC : DRAFT AUG 2007 | ISO 9073-5 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| BS ISO 16532-2:2007 | Paper and board. Determination of grease resistance Surface repellency test |
| 11/30218551 DC : 0 | BS ISO 8784-1 - PULP, PAPER AND BOARD - MICROBIOLOGICAL EXAMINATION - PART 1: ENUMERATION OF BACTERIA AND BACTERIAL SPORES BASED ON DISINTEGRATION |
| DIN EN ISO 535:2014-06 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| ISO 6588-1:2012 | Paper, board and pulps Determination of pH of aqueous extracts Part 1: Cold extraction |
| NF ISO 2493-2 : 2011 | PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 2: TABER-TYPE TESTER |
| BS ISO 5636-3:2013 | Paper and board. Determination of air permeance (medium range) Bendtsen method |
| 09/30181245 DC : 0 | BS ISO 3039 - CORRUGATED FIBREBOARD - DETERMINATION OF GRAMMAGE OF THE COMPONENT PAPERS AFTER SEPARATION |
| 12/30252903 DC : 0 | BS ISO 15397 - GRAPHIC TECHNOLOGY - COMMUNICATION OF GRAPHIC PAPER PROPERTIES |
| ISO 15359:1999 | Paper and board Determination of the static and kinetic coefficients of friction Horizontal plane method |
| 03/316095 DC : DRAFT OCT 2003 | BS ISO 1924-3 - PAPER AND BOARD - TENSILE STRENGTH, STRAIN AT BREAK, TENSILE ENERGY ABSORPTION AND TENSILE STIFFNESS - PART 3: CONSTANT RATE OF ELONGATION METHOD (100 MM/MIN) |
| BS ISO 5631:2000 | Paper and board. Determination of colour (C/2°). Diffuse reflectance method |
| BS ISO 2469:2014 | Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO 8791-4:2007 | Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method |
| 04/30094395 DC : DRAFT JUL 2004 | ISO 9073-13 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 13: REPEATED LIQUID STRIKE-THROUGH TIME |
| ISO 16532-3:2010 | Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers |
| ISO 2493:1992 | Paper and board Determination of resistance to bending |
| I.S. EN ISO 7263:2011 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| ISO 22891:2013 | Paper — Determination of transmittance by diffuse reflectance measurement |
| I.S. EN ISO 11607-2:2017 & LC:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006, INCLUDING AMD 1:2014) |
| ISO 9416:2017 | Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| I.S. EN ISO 9073-11:2005 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF |
| UNE-ISO 5636-3:2015 | Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method |
| BS 1248-3:1990 | Wallcoverings in roll form Specification for wallcoverings for subsequent decoration |
| BS ISO 5628:2012 | Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods |
| I.S. EN 646:2006 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| ISO/TS 17958:2013 | Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s) |
| I.S. EN 60819-3-3:2011 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED ARAMID (AROMATIC POLYAMIDE) PAPERS (IEC 60819-3-3:2011) |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| AAMI ISO 11607-2:2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| ISO 16763:2016 | Graphic technology Post-press Requirements for bound products |
| UNI EN ISO 12625-11 : 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| ISO 11476:2016 | Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
| DIN EN 1104:2005-11 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS; DETERMINATION OF TRANSFER OF ANTIMICROBIC CONSTITUENTS |
| NF ISO 12830 : 2011 | PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM |
| EN ISO 12625-11:2012 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| UNI ISO 6588-1 : 2013 | PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION |
| UNI EN 16453 : 2014 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| EN 648:2006 | Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board |
| BS EN 648:2006 | Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board |
| ISO 12625-3:2014 | Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk |
| BS EN ISO 15755:2000 | Paper and board. Estimation of contraries |
| UNE-EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| UNE-EN ISO 536:2013 | Paper and board - Determination of grammage (ISO 536:2012) |
| UNE-EN 1230-2:2010 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
| BS EN ISO 12625-5:2016 | Tissue paper and tissue products Determination of wet tensile strength |
| BS EN ISO 2758:2014 | Paper. Determination of bursting strength |
| I.S. EN ISO 12625-3:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014) |
| I.S. EN 233:2016 | WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS |
| I.S. EN ISO 12625-7:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| I.S. EN ISO 12625-5:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
| EN ISO 9073-4:1997 | Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| DIN 53107:1982-05 | DETERMINING THE SMOOTHNESS OF PAPER AND BOARD BY THE BEKK METHOD |
| DIN 55468-1:1999-03 | CORRUGATED FIBREBOARD - PART 1: REQUIREMENTS AND TESTING |
| I.S. EN 1230-1:2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR |
| I.S. EN ISO 9073-9:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT |
| I.S. EN ISO 8254-2:2016 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 2: 75 DEGREE GLOSS WITH A PARALLEL BEAM, DIN METHOD (ISO 8254-2:2016) |
| I.S. EN ISO 15320:2011 | PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
| I.S. EN ISO 12625-8:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
| I.S. EN ISO 1924-2:2009 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| I.S. EN ISO 3037:2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
| I.S. EN ISO 12625-6:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE |
| I.S. EN ISO 2758:2014 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| I.S. EN ISO 9073-4:1998 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 4: DETERMINATION OF TEAR RESISTANCE |
| I.S. EN ISO 2759:2014 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| I.S. EN ISO 8254-1:2009 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| I.S. EN ISO 534:2011 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
| I.S. EN ISO 12625-4:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| UNI ISO 16532-1 : 2009 | PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: PERMEABILITY TEST |
| VDE 0311-35 : 1988 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - SPECIFICATIONS; SPECIAL PAPERS |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| DIN VDE 0311-32 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; CAPACITOR PAPERS |
| VDE 0311-34 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATION; ELECTROLYTIC CAPACITOR PAPERS |
| DIN VDE 0311-31 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; GENERAL PURPOSE ELECTRICAL PAPERS |
| BS 2782-8:Method 820A:1996 | Methods of testing plastics. Other properties Determination of water vapour transmission rate (dish method) |
| BS 3631:1984 | Method for determination of ash of paper and board |
| ONORM EN ISO 12625-15 : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| DIN VDE 0311-34 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; ELECTROLYTIC CAPACITOR PAPERS |
| VDE 0311-31 : 1988 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - SPECIFICATIONS; GENERAL PURPOSE ELECTRICAL PAPERS |
| VDE 0311-32 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATIONS; CAPACITOR PAPERS |
| DIN VDE 0311-35 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; SPECIAL PAPER |
| DIN VDE 0311-33 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; CRPE PAPERS |
| VDE 0311-33 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATIONS; CREPE PAPERS |
| ISO 15754:2009 | Paper and board Determination of z-directional tensile strength |
| 17/30345789 DC : 0 | BS EN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| BS ISO 5636-5:2013 | Paper and board. Determination of air permeance (medium range) Gurley method |
| BS ISO 2493-1:2010 | Paper and board. Determination of bending resistance Constant rate of deflection |
| DIN EN ISO 535 E : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| ISO 8254-3:2016 | Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI method |
| DIN EN ISO 1974:2012-09 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| UNI ISO 2471 : 2009 | PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD |
| 04/30101211 DC : DRAFT APR 2004 | ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| 16/30330102 DC : 0 | BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE |
| I.S. EN ISO 12625-11:2012 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| 13/30272957 DC : 0 | BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| BS EN 16453:2014 | Pulp, paper and paperboard. Determination of phthalates in extracts from paper and paperboard |
| BS ISO 5636-6:2015 | Paper and board. Determination of air permeance (medium range) Oken method |
| BS ISO 2759 : 2001 AMD 14673 | BOARD - DETERMINATION OF BURSTING STRENGTH |
| BS 4415-2:1986 | Determination of the tensile properties of paper and board Constant rate of elongation method |
| BS 2924-2:1983 | Aqueous extracts of paper, board and pulp Method for determination of conductivity |
| UNE-ISO 5636-5:2015 | Paper and board. Determination of air permeance (medium range). Part 5: Gurley method |
| 04/30094399 DC : DRAFT JUL 2004 | ISO 9073-14 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 14: WETBACK |
| ISO 16532-2:2007 | Paper and board Determination of grease resistance Part 2: Surface repellency test |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| 11/30216364 DC : 0 | BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD) |
| BS 6388-3:1987 | Accelerated ageing of paper and board Method for moist heat treatment at 80°C and 65% relative humidity |
| ISO 3034:2011 | Corrugated fibreboard — Determination of single sheet thickness |
| DIN EN ISO 9073-15:2008-08 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY |
| BS EN ISO 12625-15:2015 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
| PD ISO/TS 17958:2013 | Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s) |
| 11/30196205 DC : 0 | BS ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR (DIFFUSE REFLECTANCE FACTOR) |
| UNI EN 15519 : 2008 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
| UNI EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| ISO 12192:2011 | Paper and board — Determination of compressive strength — Ring crush method |
| NF ISO 3034 : 2011 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS |
| UNI ISO 6587 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACTS |
| BS ISO 5631-2:2015 | Paper and board. Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10°) |
| BS ISO 9197:2006 | Paper and board. Determination of water-soluble chlorides |
| 11/30253307 DC : 0 | BS ISO 6588-2 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION |
| BS ISO 6588-1:2012 | Paper, board and pulps. Determination of pH of aqueous extracts Cold extraction |
| ISO 777:2005 | Paper, board and pulp Determination of acid-soluble calcium |
| 08/30130536 DC : DRAFT MAR 2008 | BS ISO 2470-1 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) |
| 17/30351720 DC : 0 | BS EN ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| 10/30204991 DC : 0 | BS ISO 534 - PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
| 15/30323163 DC : 0 | BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| BS ISO 15359:1999 | Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
| BS EN ISO 638:2008 | Paper, board and pulps. Determination of dry matter content. Oven-drying method |
| 03/309344 DC : DRAFT JUNE 2003 | ISO 1830 - PAPER, BOARD AND PULPS - DETERMINATION OF MANGANESE |
| 07/30130542 DC : 0 | ISO 2471 - PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD |
| 15/30323957 DC : 0 | BS EN ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
| BS ISO 2493-2:2011 | Paper and board. Determination of bending resistance Taber-type tester |
| 12/30213199 DC : 0 | BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| 09/30190545 DC : 0 | BS ISO 2493-1 - PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
| BS ISO 22891:2013 | Paper. Determination of transmittance by diffuse reflectance measurement |
| ISO 8787:1986 | Paper and board — Determination of capillary rise — Klemm method |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 15397:2014 | Graphic technology — Communication of graphic paper properties |
| BS ISO 15397:2014 | Graphic technology. Communication of graphic paper properties |
| 03/309339 DC : DRAFT JUNE 2003 | ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| DIN ISO 5630-6:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009) |
| UNE-EN ISO 3035:2012 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| BS ISO 1830:2005 | Paper, board and pulps. Determination of acid-soluble manganese |
| 07/30130545 DC : 0 | BS ISO 8254-1 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| BS 7304-2(1990) : AMD 7009 | METHODS OF TEST FOR NON-WOVENS - DETERMINATION OF THICKNESS |
| 08/30183287 DC : DRAFT JUNE 2008 | BS ISO 12625-12 - TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| BS ISO 10775:2013 | Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method |
| BS ISO 19594:2017 | Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page-pull test working upwards |
| BS ISO 5630-7:2014 | Paper and board. Accelerated ageing Exposure to light |
| 10/30196197 DC : 0 | BS ISO 2493-2 - PAPER AND BOARD - DETERMINATION OF RESISTANCE TO BENDING - PART 2:TABER-TYPE TESTER |
| ISO 20494:2017 | Paper — Requirements for stability for general graphic applications |
| BIS IS/ISO 2470-1 : 2009 | PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) |
| 08/30175646 DC : DRAFT MAR 2008 | BS EN 1230-2 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| BS ISO 3039:2010 | Corrugated fibreboard. Determination of grammage of the component papers after separation |
| BS EN ISO 11607-2 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| BS ISO 22414:2004 | Paper. Cut-size office paper. Measurement of edge quality |
| ISO 1762:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C |
| 12/30196194 DC : 0 | BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| ISO 1924-1:1992 | Paper and board Determination of tensile properties Part 1: Constant rate of loading method |
| UNE-ISO 5631-2:2015 | Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º) |
| UNE-ISO 3039:2013 | Corrugated fibreboard. Determination of the grammage of the component papers after separation |
| I.S. EN ISO 9073-5:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| ISO 5631:2000 | Paper and board Determination of colour (C/2 degrees) Diffuse reflectance method |
| ISO 5630-5:2008 | Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 11556:2005 | Paper and board — Determination of curl using a single vertically suspended test piece |
| PREN ISO 3037 : DRAFT 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013) |
| DIN ISO 15754:2010-04 | Paper and board - Determination of z-directional tensile strength (ISO 15754:2009) |
| UNE-ISO 8784-1:2016 | Pulp, paper and board. Microbiological examination. Part 1: Enumeration of bacteria and bacterial spores based on disintegration |
| ISO 5630-7:2014 | Paper and board — Accelerated ageing — Part 7: Exposure to light |
| UNI EN ISO 1974 : 2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD |
| ONORM EN ISO 12625-11 : 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| AAMI ISO 11607-2 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| BS EN ISO 9073-18:2008 | Textiles. Test methods for nonwovens Determination of breaking strength and elongation of nonwoven materials using the grab tensile test |
| 17/30348279 DC : 0 | BS EN 1104 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| I.S. EN 648:2006 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| ISO 16260:2016 | Paper and board — Determination of internal bond strength |
| ISO 5631-3:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) |
| ISO 22754:2008 | Pulp and paper — Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement |
| ISO 2493-1:2010 | Paper and board Determination of bending resistance Part 1: Constant rate of deflection |
| ISO 5636-4:2013 | Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method |
| ISO 11480:2017 | Pulp, paper and board — Determination of total chlorine and organically bound chlorine |
| ISO 11108:1996 | Information and documentation — Archival paper — Requirements for permanence and durability |
| BS ISO 2470-1:2016 | Paper, board and pulps. Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness) |
| ISO 9197:2016 | Paper, board and pulps Determination of water-soluble chlorides |
| DIN EN 648:2006-12 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| UNI EN ISO 535 : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD |
| CEI EN 60819-2 : 2002 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| ISO 17812:2007 | Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper |
| BS ISO 8254-3:2016 | Paper and board. Measurement of specular gloss 20° gloss with a converging beam, TAPPI method |
| ISO 16532-1:2008 | Paper and board — Determination of grease resistance — Part 1: Permeability test |
| CEI EN 60819-3-3 : 2012 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED ARAMID (AROMATIC POLYAMIDE) PAPERS |
| UNE-EN ISO 287:2018 | Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017) |
| ISO 14968:1999 | Paper and board Cut-size office paper Measurement of curl in a pack of sheets |
| BS ISO 12830:2011 | Paper, board and pulps. Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium |
| ISO 287:2017 | Paper and board — Determination of moisture content of a lot — Oven-drying method |
| UNI ISO 2470-2 : 2010 | PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) |
| NF EN ISO 3035 : 2011 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| ISO 6588-2:2012 | Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| ISO 5631-1:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| DIN EN ISO 536:2012-11 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| DIN EN ISO 7263:2011-05 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| DIN EN 259-1:2001-12 | WALL COVERINGS IN ROLL FORM - HEAVY DUTY WALLCOVERINGS - PART 1: SPECIFICATIONS |
| DIN EN ISO 9706:2010-02 | Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| UNE-EN ISO 8254-2:2016 | Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| BS EN 259:1997 | Wallcoverings in roll form. Specification for heavy duty wallcoverings |
| BS EN 20534:1993 | Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board |
| BS EN 15519:2007 | Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract |
| BS EN ISO 12625-8:2010 | Tissue paper and tissue products Water-absorption time and water-absorption capacity, basket-immersion test method |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method |
| ISO 15318:1999 | Pulp, paper and board Determination of 7 specified polychlorinated biphenyls (PCB) |
| BS EN 12281:2002 | Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| UNE-EN ISO 12625-8:2011 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| EN ISO 8254-2:2016 | Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| EN ISO 9073-5:2008 | Textiles - Test methods for nonwovens - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2008) |
| EN ISO 15318:1999 | Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999) |
| EN ISO 15320:2011 | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
| UNI EN 1230-1 : 2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR |
| UNI EN ISO 9073-9 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT |
| ENV 12625-2 : DRAFT 1999 | TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
| UNI EN ISO 7263 : 2011 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| UNI EN ISO 12625-8 : 2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER- ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
| UNI EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| UNI EN ISO 1924-2 : 2009 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| UNI EN ISO 2758 : 2014 | PAPER - DETERMINATION OF BURSTING STRENGTH |
| UNI EN 1230-2 : 2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| UNI EN ISO 15320 : 2011 | PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
| UNI EN ISO 8254-1 : 2009 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| UNI EN ISO 534 : 2012 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
| UNI EN ISO 3037 : 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| UNI EN ISO 2759 : 2014 | BOARD - DETERMINATION OF BURSTING STRENGTH |
| UNI EN ISO 12625-3 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK |
| UNI EN ISO 12625-1 : 2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| 03/309373 DC : DRAFT JUNE 2003 | ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| UNE-ISO 9416:2011 | Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| CSA ISO 11607-1 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| UNI EN ISO 9073-18 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST |
| UNI ISO 5636-4 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| DIN ISO 9961:1994-03 | DRAUGHTING MEDIA FOR TECHNICAL DRAWINGS - NATURAL TRACING PAPER |
| BS ISO 17812:2007 | Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper |
| BS ISO 18522:2016 | Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
| DIN ISO 3781:2012-07 | Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
| 17/30357546 DC : 0 | BS EN ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| DIN VDE 0311-20 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; METHODS OF TEST |
| BS ISO 6588-2:2012 | Paper, board and pulps. Determination of pH of aqueous extracts Hot extraction |
| 16/30325731 DC : 0 | BS ISO 11480 - PULP, PAPER AND BOARD - DETERMINATION OF TOTAL CHLORINE AND ORGANICALLY BOUND CHLORINE |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| 06/30145155 DC : DRAFT JAN 2006 | ISO 16532-2 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 2: SURFACE REPELLENCY TEST |
| BS ISO 2758 : 2001 AMD 14672 | PAPER - DETERMINATION OF BURSTING STRENGTH |
| 13/30277424 DC : 0 | BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| 07/30140460 DC : 0 | BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) |
| UNI ISO 5636-3 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| 03/306708 DC : DRAFT APR 2003 | ISO 15994 - GRAPHIC TECHNOLOGY - TESTING OF PRINTS AND PRINTING PAPER - DETERMINATION OF THE VISUAL GLOSS NUMBER |
| 11/30239244 DC : 0 | BS EN ISO 12625-7 - TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR |
| 04/30118282 DC : DRAFT AUG 2004 | EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER ABSORPTION TIME AND RESIDUAL WATER ABSORPTION CAPACITY, MANUAL AND AUTOMATED BASKET IMMERSION TEST METHOD |
| BS ISO 9073-11:2002 | Textiles. Test methods for nonwovens Run-off |
| DIN EN ISO 12625-16:2015-05 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| BS ISO 15754:2009 | Paper and board. Determination of z-directional tensile strength |
| BS ISO 5630-5:2008 | Paper and board. Accelerated ageing Exposure to elevated temperature at 100 °C |
| BS ISO 16763:2016 | Graphic technology. Post-press. Requirements for bound products |
| I.S. EN ISO 15318:2000 | PULP, PAPER AND BOARD - DETERMINATION OF 7 SPECIFIED POLYCHLORINATED BIPHENYLS (PCB) |
| 07/30165293 DC : 0 | BS EN ISO 7263 - CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| 10/30205404 DC : 0 | BS ISO 5628 - PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS |
| DIN ISO 5630-5:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008) |
| BS ISO 5631-1:2015 | Paper and board. Determination of colour by diffuse reflectance Indoor daylight conditions (C/2°) |
| 13/30247449 DC : 0 | BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| 13/30283973 DC : 0 | BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT |
| CEI EN 60641-2 : 2005 | PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 07/30167166 DC : 0 | BS EN ISO 287 - PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT-OVEN-DRYING METHOD |
| 15/30311310 DC : 0 | BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 DEGREES) |
| BS EN ISO 535:2014 | Paper and board. Determination of water absorptiveness. Cobb method |
| 01/203394 DC : DRAFT MAY 2001 | IEC 60641-2 - PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BIS IS 15891-9 : 2012 | TEXTILES - TEST METHODS FOR NON-WOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING COEFFICIENT |
| DIN ISO 5630-4:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| 12/30196191 DC : 0 | BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| DIN EN 16453 E : 2014 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| 15/30311307 DC : 0 | BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
| BS ISO 1762:2015 | Paper, board and pulps. Determination of residue (ash) on ignition at 525 °C |
| 16/30328581 DC : 0 | BS ISO 19594 - GRAPHIC TECHNOLOGY - TEST METHODS FOR THE DETERMINATION OF THE BINDING STRENGTH FOR PERFECT BOUND PRODUCTS - PAGE PULL TEST WORKING UPWARDS |
| 01/121198 DC : DRAFT MAR 2001 | BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREES GLOSS |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| ISO 8791-3:2017 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| BS ISO 5631-3:2015 | Paper and board. Determination of colour by diffuse reflectance Indoor illumination conditions (D50/2°) |
| 13/30286354 DC : 0 | BS EN ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| 08/30175643 DC : DRAFT MAR 2008 | BS EN 1230-1 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| 03/306710 DC : DRAFT APR 2003 | ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
| UNE-ISO 2493-2:2014 | Paper and board. Determination of resistance to bending. Part 2: Taber-type tester |
| NF ISO 5628 : 2012 | PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS |
| BS EN 60819-3-3:2011 | Non-cellulosic papers for electrical purposes Specifications for individual materials. Sheet 3: Unifilled aramid (aromatic polyamide) papers |
| UNE-ISO 16945:2015 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| UNI ISO 17812 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF TOTAL MAGNESIUM, TOTAL CALCIUM, TOTAL MANGANESE, TOTAL IRON AND TOTAL COPPER |
| UNE-EN ISO 12625-11:2013 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| UNI ISO 6588-2 : 2013 | PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION |
| ASTM D 585 : 1997 : R2002 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| DIN EN ISO 9073-18:2008-08 | Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007) |
| DIN ISO 5630-7:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 7: EXPOSURE TO LIGHT (ISO 5630-7:2014) |
| 03/309336 DC : DRAFT JUNE 2003 | ISO 22414 - PAPER - CUT-SIZE OFFICE PAPER - MEASUREMENT OF EDGE QUALITY |
| BS ISO 5629:2017 | Paper and board. Determination of bending stiffness. Resonance method |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| CSA ISO 11607-2 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| ISO 1830:2005 | Paper, board and pulps Determination of acid-soluble manganese |
| PREN 17163 : DRAFT 2017 | PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD |
| I.S. EN ISO 11607-1:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014) |
| ISO 2470-2:2008 | Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness) |
| ONORM EN ISO 638 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| BS 1248-1:1990 | Wallcoverings in roll form Terms and symbols |
| PREN 233 : DRAFT 2016 | WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| EN 1104:2005 | Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| UNE-EN ISO 11607-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014) |
| EN 1230-2:2009 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
| UNI EN ISO 11607-1 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 12625-1:2011 | Tissue paper and tissue products Part 1: General guidance on terms |
| ISO 16762:2016 | Graphic technology Post-press General requirements for transfer, handling and storage |
| ISO 779:2005 | Paper, board and pulp Determination of acid-soluble iron |
| ISO 5636-6:2015 | Paper and board Determination of air permeance (medium range) Part 6: Oken method |
| ISO 5631-2:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) |
| I.S. EN 1230-2:2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| ISO 7263:2011 | Corrugating medium Determination of the flat crush resistance after laboratory fluting |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| DIN EN ISO 12625-9:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| DIN EN ISO 3037:2013-12 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| DIN EN ISO 2759:2014-10 | Board - Determination of bursting strength (ISO 2759:2014) |
| DIN EN ISO 12625-8:2011-04 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN ISO 2758:2014-12 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| DIN EN ISO 12625-7:2014-08 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014) |
| BS EN 12283:2002 | Printing and business paper. Determination of toner adhesion |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| UNE-EN ISO 12625-4:2017 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| BS EN ISO 9073-13:2007 | Textiles. Test methods for nonwovens Repeated liquid strike-through time |
| BS EN ISO 3037:2013 | Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
| BS EN ISO 12625-3:2014 | Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk |
| BS EN ISO 536:2012 | Paper and board. Determination of grammage |
| BS EN 29073-3:1992 | Methods of test for nonwovens Methods of test for nonwovens. Determination of tensile strength and elongation |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| BS EN ISO 12625-9:2005 | Tissue paper and tissue products Determination of ball burst strength |
| ISO 12625-12:2010 | Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency |
| ISO 9073-11:2002 | Textiles — Test methods for nonwovens — Part 11: Run-off |
| ISO 12625-8:2010 | Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| BS EN ISO 15320:2011 | Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract |
| UNI EN ISO 536 : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| UNE-ISO 2493-1:2014 | Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection |
| BS EN ISO 534:2011 | Paper and board. Determination of thickness, density and specific volume |
| BS EN ISO 12625-6:2016 | Tissue paper and tissue products Determination of grammage |
| BS EN 14086:2003 | Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method |
| BS EN ISO 9706:2000 | Information and documentation. Paper for documents. Requirements for permanence |
| UNE-EN 233:2017 | Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| UNE-EN ISO 12625-5:2017 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| UNE-EN ISO 15320:2012 | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
| ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
| BS EN ISO 9073-9:2008 | Textiles. Test methods for nonwovens Determination of drapability including drape coefficient |
| ISO 9706:1994 | Information and documentation — Paper for documents — Requirements for permanence |
| ISO 12625-16:2015 | Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method |
| IEC 60819-2:2001 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test |
| BS EN ISO 7263:2011 | Corrugating medium. Determination of the flat crush resistance after laboratory fluting |
| ISO 9073-9:2008 | Textiles Test methods for nonwovens Part 9: Determination of drapability including drape coefficient |
| ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
| UNE-EN 1230-1:2010 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour |
| UNE-EN ISO 534:2012 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| UNE-EN ISO 12625-3:2015 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| BS EN 1230-1:2001 | Paper and board intended for contact with foodstuffs. Sensory analysis Odour |
| ISO 15755:1999 | Paper and board Estimation of contraries |
| UNE-EN ISO 12625-9:2015 | Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
| ISO 9073-7:1995 | Textiles — Test methods for nonwovens — Part 7: Determination of bending length |
| ISO 9073-8:1995 | Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine) |
| BS EN 1230-2:2009 | Paper and board intended to come into contact with foodstuffs. Sensory analysis Off-flavour (taint) |
| BS EN ISO 12625-7:2014 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight) |
| ISO 9073-14:2006 | Textiles — Test methods for nonwovens — Part 14: Coverstock wetback |
| ISO 8254-2:2016 | Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
| ISO 15320:2011 | Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract |
| UNE-EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| BS EN ISO 9073-8:1998 | Textiles. Test methods for nonwovens Determination of liquid strike-through time (simulated urine) |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 638:2008 | Paper, board and pulps Determination of dry matter content Oven-drying method |
| BS EN ISO 1924-2:2008 | Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min) |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 12625-9:2015 | Tissue paper and tissue products Part 9: Determination of ball burst strength |
| UNE-EN ISO 12625-6:2017 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| ISO 9073-18:2007 | Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test |
| UNE-EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| UNE-ISO 3781:2015 | Paper and board - Determination of tensile strength after inmersion in water |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| ONORM EN ISO 536 : 2013 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| ISO 9073-15:2007 | Textiles Test methods for nonwovens Part 15: Determination of air permeability |
| BS EN ISO 9073-14:2007 | Textiles. Test methods for nonwovens Coverstock wetback |
| BS EN 14719:2005 | Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction |
| ISO 9073-13:2006 | Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time |
| ISO 6588:1981 | Paper, board and pulps Determination of pH of aqueous extracts |
| EN ISO 535:2014 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| EN 14719:2005 | Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| EN ISO 9073-13:2007 | Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006) |
| EN 233:1999 | Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| EN 15519:2007 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
| EN ISO 1974:2012 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| EN ISO 9073-15:2008 | Textiles - Test methods for nonwovens - Part 15: Determination of air permeability (ISO 9073-15:2007) |
| EN ISO 534:2011 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| EN ISO 9073-6:2003 | Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
| EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| EN 29073-3:1992 | Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation |
| EN ISO 3035:2011 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| EN ISO 9073-9:2008 | Textiles - Test methods for nonwovens - Part 9: Determination of drapability including drape coefficient (ISO 9073-9:2008) |
| EN 14086:2003 | Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
| EN ISO 9073-2:1996 | Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995) |
| EN ISO 12625-8:2010 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| EN ISO 12625-9:2015 | Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
| EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| EN ISO 7263:2011 | Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011) |
| EN ISO 9073-14:2007 | Textiles - Test methods for nonwovens - Part 14: Coverstock wetback (ISO 9073-14:2006) |
| EN 27023:1992 | Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983) |
| EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| EN ISO 9073-7:1998 | Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) |
| EN 13676:2001 | Polymer coated paper and board intended for food contact - Detection of pinholes |
| EN ISO 1924-2:2008 | Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008) |
| EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| EN 259:1991/AC:1997 | WALL COVERINGS IN ROLL FORM - SPECIFICATION FOR HEAVY DUTY WALL COVERINGS |
| EN ISO 9706:1998 | Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| EN ISO 15755:1999 | Paper and board - Estimation of contraries (ISO 15755:1999) |
| EN ISO 8254-1:2009 | Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009) |
| EN ISO 12625-1:2011 | Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011) |
| EN ISO 9073-18:2008 | Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007) |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| EN 29073-1:1992 | Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area |
| EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| EN 16453:2014 | Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard |
| EN 647:1993 | Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract |
| EN ISO 9073-8:1998 | Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9073-11:2004 | Textiles - Test methods for nonwovens - Part 11: Run-off (ISO 9073-11:2002) |
| ISO 778:2005 | Paper, board and pulp Determination of acid-soluble copper |
| ISO 10775:2013 | Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method |
| BS ISO 9895:2008 | Paper and board. Compressive strength. Short-span test |
| BS ISO 779:2005 | Paper, board and pulp. Determination of acid-soluble iron |
| UNE-ISO 6588-2:2013 | Paper, board and pulps. Determination of pH of aqueous extracts. Part 2: Hot extraction |
| UNE-EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| UNE-ISO 2470-1:2012 | Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness) |
| 03/310720 DC : DRAFT JUNE 2003 | ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
| UNI EN ISO 638 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| ISO 10716:1994 | Paper and board Determination of alkali reserve |
| BS ISO 3034:2011 | Corrugated fibreboard. Determination of single sheet thickness |
| 17/30323191 DC : DRAFT JAN 2017 | BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS |
| NF ISO 12192 : 2011 | PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD |
| 07/30140452 DC : 0 | BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
| BS ISO 22754:2008 | Pulp and paper. Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement |
| I.S. EN ISO 9862:2005 | GEOSYNTHETICS - SAMPLING AND PREPARATION OF TEST SPECIMENS |
| BS EN ISO 287:2017 | Paper and board. Determination of moisture content of a lot. Oven-drying method |
| PREN 1104 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| 14/30219261 DC : 0 | BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD |
| ISO 8784-1:2014 | Pulp, paper and board Microbiological examination Part 1: Enumeration of bacteria and bacterial spores based on disintegration |
| 06/30099592 DC : DRAFT JAN 2006 | ISO 17812 - PAPER, BOARD AND PULP - DETERMINATION OF MAGNESIUM, CALCIUM, MANGANESE, IRON AND COPPER |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| 13/30283977 DC : 0 | BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR |
| BS ISO 1924-3:2005 | Paper and board. Determination of tensile properties Constant rate of elongation method (100 mm/min) |
| 07/30140456 DC : 0 | BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 ) |
| DIN ISO 3034:2016-08 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| 15/30284739 DC : 0 | BS ISO 16763 - GRAPHIC TECHNOLOGY - POST PRESS - REQUIREMENTS FOR BOUND PRODUCTS |
| 17/30353869 DC : DRAFT SEP 2017 | BS EN 17163 - PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD |
| 03/306705 DC : DRAFT APR 2003 | ISO 6588-2 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION |
| BS ISO 11475:2017 | Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight) |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| BS ISO 9198:2001 | Paper, board and pulp. Determination of water-soluble sulfates |
| 06/30148429 DC : DRAFT JULY 2006 | ISO 9073-17 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 17: EVALUATION OF WATER PENETRATION (SPRAY IMPACT TEST) |
| 09/30198874 DC : DRAFT SEP 2009 | BS ISO 12830 - PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM |
| PREN ISO 12625-3 : DRAFT 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013) |
| BS ISO 16532-1:2008 | Paper and board. Determination of grease resistance Permeability test |
| BS ISO 5630-6:2009 | Paper and board. Accelerated ageing Exposure to atmospheric pollution (nitrogen dioxide) |
| ISO 5629:2017 | Paper and board — Determination of bending stiffness — Resonance method |
| UNI EN ISO 3035 : 2012 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| BS ISO 2471:1998 | Paper and board. Determination of opacity (paper backing). Diffuse reflectance method |
| BS ISO 8791-4:2007 | Paper and board. Determination of roughness/smoothness (air leak methods) Print-surf method |
| BS ISO 10716:1994 | Paper and board. Determination of alkali reserve |
| UNE-ISO 15359:2014 | Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
| BS ISO 29681:2009 | Paper, board and pulps. Determination of pH of salted water extracts |
| 15/30302564 DC : 0 | BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| 13/30230645 DC : 0 | BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH |
| BS ISO 777:2005 | Paper, board and pulp. Determination of acid-soluble calcium |
| BS 6428:1983 | Method for sampling empty sacks for testing |
| 03/310738 DC : DRAFT JULY 2003 | EN 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| 06/30154504 DC : DRAFT AUG 2006 | ISO 9073-9 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: EVALUATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT |
| UNI ISO 8791-2 : 2014 | PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
| BS ISO 2528:2017 | Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method |
| 08/30181295 DC : DRAFT APR 2008 | BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) |
| BS ISO 9706 : 94 AMD 10518 | INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE |
| 07/30122297 DC : 0 | BS ISO 15754 - PAPER AND BOARD - DETERMINATION OF Z-DIRECTIONAL TENSILE STRENGTH |
| BS EN ISO 3035:2011 | Corrugated fibreboard. Determination of flat crush resistance |
| BS ISO 8254-1 : 99 AMD 14259 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1 - 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| BS ISO 536 : 1995 AMD 9309 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| 03/310721 DC : DRAFT JUNE 2003 | ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 04/30101215 DC : DRAFT APR 2004 | ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| UNI EN ISO 9073-5 : 2009 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| 09/30193349 DC : DRAFT FEB 2009 | BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREE (INDOOR ILLUMINATION CONDITIONS) |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| DIN ISO 8784-1:2016-05 | PULP, PAPER AND BOARD - MICROBIOLOGICAL EXAMINATION - PART 1: ENUMERATION OF BACTERIA AND BACTERIAL SPORES BASED ON DISINTEGRATION (ISO 8784-1:2014) |
| ISO 8791-2:2013 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method |
| I.S. EN 16453:2014 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| UNI EN ISO 9073-15 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY |
| EN ISO 287:2017 | Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017) |
| UNE-ISO 3036:2013 | Board. Determination of puncture resistance. |
| I.S. EN ISO 287:2017 | PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN-DRYING METHOD (ISO 287:2017) |
| I.S. EN 60641-2:2004 | SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| ISO 2528:2017 | Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
| UNE-EN ISO 1974:2013 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| I.S. EN ISO 12625-16:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| I.S. EN ISO 12625-15:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| UNI ISO 9895 : 2009 | PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST |
| ISO 16945:2014 | Corrugating medium — Determination of the edge crush resistance after laboratory fluting |
| BS ISO 2470:1999 | Paper, board and pulps. Measurement of diffuse blue reflectance factor (ISO brightness) |
| ONORM EN ISO 7263 : 2011 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| BS EN 646:2006 | Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board |
| EN 646:2006 | Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board |
| UNI EN ISO 11607-2 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| BS ISO 2144:2015 | Paper, board and pulps. Determination of residue (ash) on ignition at 900 °C |
| UNE-ISO 5631-1:2015 | Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2º) |
| UNE-ISO 11475:2010 | Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight) |
| UNE-ISO 16532-3:2017 | Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers |
| UNE-EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| PREN 648 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| NF ISO 5630-6 : 2009 | PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) |
| I.S. EN ISO 12625-1:2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| ISO 8226-1:1994 | Paper and board Measurement of hygroexpansivity Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % |
| I.S. ENV 12625-2:1999 | TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
| ISO 5630-6:2009 | Paper and board Accelerated ageing Part 6: Exposure to atmospheric pollution (nitrogen dioxide) |
| I.S. EN ISO 536:2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| DIN EN 1230-1:2010-02 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour |
| DIN EN ISO 1924-2:2009-05 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| DIN EN ISO 9073-2:1997-02 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 2: DETERMINATION OF THICKNESS |
| BS EN 13676:2001 | Polymer coated paper and board intended for food contact. Detection of pinholes |
| IEC 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| BS EN 20535:1994 | Paper and board. Determination of water absorptiveness. Cobb method |
| ISO 12625-6:2016 | Tissue paper and tissue products Part 6: Determination of grammage |
| ISO 12625-5:2016 | Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
| BS EN 233:2016 | Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| BS EN 12858:1999 | Paper. Printing and business paper. Requirements for continuous stationery |
| BS EN ISO 9073-7:1998 | Textiles. Test methods for nonwovens Determination of bending length |
| IEC 60819-3-3:2011 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| ISO 9073-4:1997 | Textiles Test methods for nonwovens Part 4: Determination of tear resistance |
| BS EN ISO 9073-6:2003 | Textiles. Test methods for nonwovens Absorption |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 12625-15:2015 | Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| ISO 3035:2011 | Corrugated fibreboard — Determination of flat crush resistance |
| ISO 7023:1983 | Packaging Sacks Method of sampling empty sacks for testing |
| DIN EN 14719:2005-10 | Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| DIN ISO 5630-4:2017-03 | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| DIN EN ISO 9073-11:2005-03 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF |
| DIN ISO 5630-6:2017-03 | Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide) (ISO 5630-6:2009) |
| DIN EN ISO 15320:2011-11 | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011) |
| DIN EN ISO 9862:2005-05 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| DIN EN ISO 638:2009-01 | Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008) |
| DIN EN ISO 8254-1:2009-09 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| DIN EN ISO 2759:2003-11 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| EN ISO 12625-3:2014 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN 15519:2008-01 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
| EN 60819-3-3:2011 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers |
| DIN ISO 8791-4:2008-05 | Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2007) |
| DIN ISO 5630-7:2017-03 | Paper and board - Accelerated ageing - Part 7: Exposure to light (ISO 5630-7:2014) |
| EN 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| I.S. EN 29073-1:1993 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 1: DETERMINATION OF MASS PER UNIT AREA |
| BS 6036(1995) : 1995 AMD 9160 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| BS 3433(1986) : AMD 8175 | METHOD FOR DETERMINATION OF MOISTURE CONTENT OF PAPER AND BOARD BY THE OVEN-DRYING METHOD |
| ONORM EN ISO 9073-18 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST |
| BS 4419:1980 | Methods for determination of folding endurance of paper |
| ONORM EN ISO 12625-16 : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| I.S. EN ISO 9073-7:1999 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 7: DETERMINATION OF BENDING LENGTH |
| BS 3983(1989) : AMD 7810 | METHOD FOR DETERMINATION OF THICKNESS AND APPARENT BULK DENSITY OR APPARENT SHEET DENSITY OF PAPER AND BOARD |
| BS 4468(1990) : 90 AMD 8176 | METHOD FOR DETERMINATION OF THE INTERNAL TEARING RESISTANCE OF PAPER |
| BS 2644(1991) : AMD 8174 | METHOD FOR DETERMINATION OF WATER ABSORPTIVENESS OF PAPER AND BOARD (COBB METHOD) |
| BS 3432:1980 | Method for determination of grammage of paper and board |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
| AS 1301.450:2019 | Methods of test for pulp and paper Compression strength of paper and board - Short span test (ISO 9895:2008, MOD) |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| AS 1301.566:2019 | Methods of test for pulp and paper Tensile strength of paper and paperboard (constant rate of elongation method, 100 mm/min) (ISO 1924-3:2005, MOD) |
| AS 1301.403:2019 | Methods of test for pulp and paper Bursting strength of paper (ISO 2758:2014, MOD) |
| AS/NZS 1301.421:2020 | Method of test for pulp and paper Paper, board and pulps - Determination of pH of aqueous extracts - Cold extraction |
| AS 1301.439:2019 | Methods of test for pulp and paper Bendtsen roughness of paper and paperboard (ISO 8791-2:2013, MOD) |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| AS 1301.437:2019 | Methods of test for pulp and paper Tensile strength of wetted paper and paperboard (ISO 3781:2011, MOD) |
| AS 1301.438:2019 | Methods of test for pulp and paper Bursting strength of board (ISO 2759:2014, MOD) |
| AS 1301.448:2019 | Methods of test for pulp and paper Tensile strength of paper and paperboard (constant rate of elongation method, 20 mm/min) (ISO 1924-2:2008, MOD) |
| AS 1301.420:2019 | Methods of test for pulp and paper Gurley air permeance of paper (ISO 5636-5:2013, MOD) |
| AS/NZS 1301.422:2020 | Method of test for pulp and paper Paper, board and pulps - Determination of pH of aqueous extracts - Hot extraction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.