ISO 80000-4:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Quantities and units Part 4: Mechanics
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Superseded date
26-08-2019
Superseded by
Language(s)
English, French, Russian
Published date
17-03-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 80000-4:2006 specifies the names, symbols and definitions for quantities and units of classical mechanics. Where appropriate, conversion factors are also given.
| DevelopmentNote |
Supersedes ISO 31-3 (03/2006) DRAFT ISO/DIS 80000-4 is also available for this standard. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
24
|
| ProductNote |
THIS STANDARD HAVE CORRECT VERSION FOR FR-2006
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 80000-4 : 2014 | Identical |
| JIS Z 8000-4:2014 | Identical |
| NF EN ISO 80000-4 : 2013 | Identical |
| NBN EN ISO 80000-4 : 2013 | Identical |
| NEN EN ISO 80000-4 : 2013 | Identical |
| NS EN ISO 80000-4 : 2013 | Identical |
| I.S. EN ISO 80000-4:2013 | Identical |
| PN EN ISO 80000-4 : 2013 | Identical |
| SN EN ISO 80000-4 : 2013 | Identical |
| UNI CEI EN ISO 80000-4 : 2013 | Identical |
| ÖNORM EN ISO 80000-4: 2020 01 15 | Identical |
| BIS IS/ISO 80000-4 : 2006 | Identical |
| UNE-EN ISO 80000-4:2014 | Identical |
| BS EN ISO 80000-4:2013 | Identical |
| CEI UNI EN ISO 80000-4 : 1ED 2013 | Identical |
| EN ISO 80000-4:2013 | Identical |
| DIN EN ISO 80000-4:2013-08 | Identical |
| CEI UNI ISO 80000-4 : 2010 | Identical |
| NEN ISO 80000-4 : 2006 | Identical |
| NF ISO 80000-4 : 2006 | Identical |
| BS ISO 80000-4 : 2006 | Identical |
| PN ISO 80000-4 : 2010 | Identical |
| DIN ISO 21360-1:2016-09 | VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012) |
| 10/30214897 DC : 0 | BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES |
| 15/30283700 DC : 0 | BS EN ISO 80000-12 - QUANTITIES AND UNITS - PART 12: CONDENSED MATTER PHYSICS |
| 17/30330389 DC : 0 | BS EN ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| DIN EN ISO 11372:2012-03 | Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
| I.S. EN ISO 11810-2:2009 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
| ISO 80000-7:2008 | Quantities and units Part 7: Light |
| CEI UNI EN 80000-6 : 2009 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
| DIN EN ISO 10961:2012-06 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
| UNI CEI ISO 80000-12 : 2010 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| BS EN ISO 10961:2012 | Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
| PREN 764-1 : DRAFT 2013 | PRESSURE EQUIPMENT - PART 1: VOCABULARY |
| 07/30126396 DC : DRAFT AUG 2007 | BS ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| 16/30297082 DC : 0 | BS EN ISO 80000-5 - QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| BS EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement |
| UNE-EN ISO 80000-11:2013 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
| 12/30240396 DC : 0 | BS ISO 80003-2 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 2: PHYSICS |
| UNI EN ISO 10462 : 2014 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
| DIN EN ISO 80000-9:2013-08 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
| I.S. EN ISO 13088:2012 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
| I.S. EN 14531-6:2009 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| ISO 19634:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols |
| ISO 21010:2017 | Cryogenic vessels — Gas/material compatibility |
| BS EN ISO 13088:2012 | Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| CEN/TR 13233 : 2007 COR 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
| I.S. EN ISO 13769:2009 | GAS CYLINDERS - STAMP MARKING |
| BIS IS/ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| UNI CEI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
| DIN EN ISO 80000-8:2008-01 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| DIN EN ISO 12213-3:2010-01 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
| BS EN ISO 80000-8:2007 | Quantities and units Acoustics |
| BS EN ISO 12213-3:2009 | Natural gas. Calculation of compression factor Calculation using physical properties |
| BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
| UNE-EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| EN ISO 10462:2013 | Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
| DIN EN ISO 4375:2015-03 | HYDROMETRY - CABLEWAY SYSTEMS FOR STREAM GAUGING (ISO 4375:2014) |
| EN 80000-14:2009 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| EN 80000-6:2008 | Quantities and units - Part 6: Electromagnetism |
| BS ISO 21360-1:2012 | Vacuum technology. Standard methods for measuring vacuum-pump performance General description |
| CEI UNI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| NF ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| 06/30160058 DC : 0 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| 12/30243456 DC : DRAFT MAR 2012 | BS ISO 16249 - SPRINGS - SYMBOLS |
| DIN EN ISO 80000-10:2016-09 (Draft) | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| BS EN ISO 80000-11:2013 | Quantities and units Characteristic numbers |
| UNI CEI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| NF EN 14531-6 : 2009 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| BS ISO 80000-9 : 2009 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| UNI CEN/TR 14473 : 2014 | TRANSPORTABLE GAS CYLINDERS - POROUS MATERIALS FOR ACETYLENE CYLINDERS |
| BS ISO 13088 : 2011 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION |
| 15/30280941 DC : 0 | BS EN ISO 24431 - GAS CYLINDERS - CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING |
| 16/30337558 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION |
| BS ISO 24431:2006 | Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling |
| CEI UNI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
| BS EN 14531-6:2009 | Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking Step by step calculations for train sets or single vehicles |
| PREN 14531-2 : DRAFT 2012 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| BS ISO 10961 : 2010 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
| BS EN ISO 8536-13:2016 | Infusion equipment for medical use Graduated flow regulators for single use with fluid contact |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| BS ISO 18437-4:2008 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method |
| NF EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| BS EN ISO 24431:2016 | Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling |
| 13/30274227 DC : 0 | BS EN 764-1 - PRESSURE EQUIPMENT - PART 1: VOCABULARY |
| UNI EN ISO 11810-2 : 2009 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
| UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| 07/30126405 DC : DRAFT DEC 2007 | ISO 80000-12 - QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| BS EN ISO 3807:2013 | Gas cylinders. Acetylene cylinders. Basic requirements and type testing |
| 16/30301546 DC : 0 | BS ISO 19634 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - NOTATIONS AND SYMBOLS |
| BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| BS ISO 80000-5 : 2007 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| UNI EN ISO 1628-1 : 2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| 07/30126402 DC : 0 | BS ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| PREN 14531-1 : DRAFT 2012 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| ISO 13769:2007 | Gas cylinders Stamp marking |
| UNI CEI ISO 80000-9 : 2010 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
| BS EN ISO 13769:2009 | Gas cylinders. Stamp marking |
| ISO 19613:2018 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer |
| I.S. EN ISO 8536-13:2016 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 13: GRADUATED FLOW REGULATORS FOR SINGLE USE WITH FLUID CONTACT (ISO 8536-13:2016) |
| ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
| I.S. EN ISO 10462:2013 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE (ISO 10462:2013) |
| EN ISO 13769:2009 | Gas cylinders - Stamp marking (ISO 13769:2007) |
| BS EN ISO 80000-10:2013 | Quantities and units Atomic and nuclear physics |
| UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
| EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| UNE-EN ISO 8536-4:2013 | Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| CEN/TR 14473:2014 | Transportable gas cylinders - Porous materials for acetylene cylinders |
| I.S. EN ISO 4375:2014 | HYDROMETRIC - CABLEWAY SYSTEMS FOR STREAM GAUGING (ISO 4375:2014) |
| I.S. EN ISO 12213-2:2009 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
| I.S. EN ISO 1628-1:2009 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
| I.S. EN ISO 12213-3:2009 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
| DIN EN ISO 11810-2:2009-07 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
| I.S. EN ISO 10297:2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
| I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| I.S. EN ISO 11810:2015 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015) |
| I.S. EN 764-2:2012 | PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
| DIN EN 764-2:2012-04 | Pressure equipment - Part 2: Quantities, symbols and units |
| UNE-EN ISO 24431:2017 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
| BIS IS/IEC 80000-6 : 2008 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
| 12/30246381 DC : 0 | BS EN ISO 3807 - GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
| NF ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| UNI CEI EN ISO 80000-12 : 2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| 17/30334065 DC : 0 | BS EN ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| DIN EN ISO 80000-12:2015-11 (Draft) | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
| 16/30299127 DC : DRAFT MAR 2016 | BS EN ISO 13769 - GAS CYLINDERS - STAMP MARKING |
| UNI EN ISO 10961 : 2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
| UNI CEI EN ISO 80000-11 : 2013 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| 12/30263252 DC : 0 | BS EN 14531-1 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| UNE-EN ISO 11372:2012 | Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
| DIN EN ISO 17871:2015-12 | GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| BS ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| UNI EN ISO 11372 : 2012 | GAS CYLINDERS - ACETYLENE CYLINDERS - FILLING CONDITIONS AND FILLING INSPECTION |
| 12/30245682 DC : 0 | BS EN ISO 10462 - GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
| ISO 3898:2013 | Bases for design of structures — Names and symbols of physical quantities and generic quantities |
| BS ISO 16249:2013 | Springs. Symbols |
| BS EN ISO 11372:2011 | Gas cylinders. Acetylene cylinders. Filling conditions and filling inspection |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| BIS IS/ISO 80000-11 : 2008 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| 07/30156919 DC : DRAFT AUG 2007 | BS EN 14531-6 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 6: HIGH SPEED TRAINS |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| PD CEN/TR 13233:2007 | Advanced technical ceramics. Notations and symbols |
| UNE-EN 14531-6:2010 | Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
| BIS IS/ISO 80000-9 : 2009 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| BS EN ISO 80000-9 : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| ISO 20475:2018 | Gas cylinders — Cylinder bundles — Periodic inspection and testing |
| I.S. EN ISO 80000-5:2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000- 5:2007) |
| UNI CEI ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| S.R. CEN/TR 14473:2014 | TRANSPORTABLE GAS CYLINDERS - POROUS MATERIALS FOR ACETYLENE CYLINDERS |
| I.S. EN ISO 11372:2011 | GAS CYLINDERS - ACETYLENE CYLINDERS - FILLING CONDITIONS AND FILLING INSPECTION (ISO 11372:2011) |
| BS EN ISO 80000-5:2013 | Quantities and units Thermodynamics |
| BS EN ISO 80000-12:2013 | Quantities and units Solid state physics |
| I.S. EN 62884-1:2017 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
| UNE-EN ISO 13088:2013 | Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
| IEC 60050-212:2010 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
| ISO 17871:2015 | Gas cylinders Quick-release cylinder valves Specification and type testing |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| DIN EN ISO 1628-1:2012-10 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012 |
| UNI EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
| UNE-EN ISO 4375:2015 | Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) |
| EN ISO 80000-11:2013 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
| UNE-EN ISO 10462:2014 | Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
| EN ISO 13088:2012 | Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
| UNI CEI EN ISO 80000-8 : 2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| EN ISO 12213-3:2009 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
| EN ISO 24431:2016 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
| UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| UNI EN ISO 12213-3 : 2010 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
| UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| UNI EN ISO 12213-2 : 2010 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
| UNI EN 764-2 : 2012 | PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
| BS ISO 19634:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols |
| UNI EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD |
| BIS IS/ISO 80000-5 : 2007 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| UNI CEI ISO 80000-11 : 2009 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| DIN EN ISO 80000-11:2013-08 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
| UNE-EN ISO 80000-9:2014 | Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
| 06/30126364 DC : 0 | IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| UNE-EN ISO 8536-13:2017 | Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
| BS EN 80000-6:2008 | Quantities and units Electromagnetism |
| 13/30243616 DC : 0 | BS EN ISO 4375 - HYDROMETRIC DETERMINATIONS - CABLEWAY SYSTEMS FOR STREAM GAUGING |
| ONORM EN ISO 1628-1 : 2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009 + AMD 1:2012) |
| BS ISO 22967:2010 | Forced draught gas burners |
| BS EN 80000-14:2009 | Quantities and units Telebiometrics related to human physiology |
| 06/30126386 DC : DRAFT AUG 2006 | IEC 80000-6 - QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
| BS ISO 9928-1:2015 | Cranes. Crane operating manual General |
| IEEE/ASTM SI 10-2016 | American National Standard for Metric Practice |
| BS ISO 80000-11 : 2008 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
| ISO 21360-1:2012 | Vacuum technology Standard methods for measuring vacuum-pump performance Part 1: General description |
| I.S. EN ISO 80000-12:2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
| BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| NF EN 80000-6 : 2008 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
| BIS IS/ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
| UNI CEI EN ISO 80000-5 : 2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| UNI CEI EN ISO 80000-10 : 2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| UNE-EN ISO 80000-12:2014 | Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| I.S. EN ISO 80000-10:2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| DIN EN ISO 80000-5:2016-02 (Draft) | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
| UNI EN 14531-6 : 2009 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| UNI EN ISO 13088 : 2012 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION |
| I.S. EN ISO 10961:2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
| EN ISO 17871:2015 | Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| DIN EN 14531-1:2016-05 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| DIN EN ISO 13769:2016-05 (Draft) | GAS CYLINDERS - STAMP MARKING |
| CEI UNI EN ISO 80000-8 : 2010 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| BS EN ISO 1183-1:2012 | Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method |
| BS EN ISO 10462:2013 | Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
| I.S. EN ISO 1183-1:2012 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| IEC 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
| I.S. EN ISO 8536-4:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
| BS EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
| DIN EN ISO 8536-4:2013-07 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
| I.S. EN ISO 80000-8:2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 24431:2016 | Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling |
| EN ISO 80000-8:2007 | Quantities and units - Part 8: Acoustics (ISO 80000-8:2007, corrected 2007-08-15) |
| BS EN ISO 17871 : 2015 | GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| BS EN ISO 4375:2014 | Hydrometry. Cableway systems for stream gauging |
| UNE-EN ISO 10297:2015 | Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
| ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
| IEC 80000-6:2008 | Quantities and units - Part 6: Electromagnetism |
| ISO 8536-13:2016 | Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact |
| UNE-CEN/TR 14473:2014 IN | Transportable gas cylinders - Porous materials for acetylene cylinders |
| UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
| ISO 12213-3:2006 | Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
| ISO 80000-5:2007 | Quantities and units Part 5: Thermodynamics |
| ISO 12213-2:2006 | Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
| IEC 80000-14:2008 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| ISO 11372:2011 | Gas cylinders — Acetylene cylinders — Filling conditions and filling inspection |
| ISO 10462:2013 | Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance |
| BS EN ISO 1628-1 : 2009 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| ISO 80000-12:2009 | Quantities and units Part 12: Solid state physics |
| ISO 8536-4:2010 | Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
| ISO 80000-10:2009 | Quantities and units Part 10: Atomic and nuclear physics |
| ISO 1628-1:2009 | Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles |
| UNE-EN ISO 12213-2:2010 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
| BS EN 764-2:2012 | Pressure equipment Quantities, symbols and units |
| ISO 11810-2:2007 | Lasers and laser-related equipment Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Part 2: Secondary ignition |
| UNE-EN ISO 12213-3:2010 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
| ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| BS EN ISO 10297 : 2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| ISO 80000-9:2009 | Quantities and units Part 9: Physical chemistry and molecular physics |
| ISO 80000-8:2007 | Quantities and units Part 8: Acoustics |
| ISO 80000-11:2008 | Quantities and units Part 11: Characteristic numbers |
| UNE-EN ISO 3807:2014 | Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2013-11-15) |
| BS EN ISO 11810-2:2009 | Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Secondary ignition |
| ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
| ISO 13088:2011 | Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection |
| EN ISO 8536-13:2016 | Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
| EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
| EN ISO 4375:2014 | Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) |
| EN ISO 80000-12:2013 | Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
| EN ISO 11810-2:2009 | Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007) |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 80000-9:2013 | Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
| EN ISO 80000-5:2013 | Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007) |
| EN ISO 11810:2015 | Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015) |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
| EN ISO 12213-2:2009 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
| EN 14531-6:2009 | Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
| UNE-EN 80000-14:2011 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| 16/30343594 DC : 0 | BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| BIS IS/ISO 80000-7 : 2008 | QUANTITIES AND UNITS - PART 7: LIGHT |
| I.S. EN 80000-6:2008 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
| I.S. EN ISO 80000-11:2013 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
| 12/30250646 DC : 0 | BS EN 14531-2 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| ISO 22967:2010 | Forced draught gas burners |
| DIN EN 14531-6:2009-12 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| BS ISO 12242:2012 | Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
| BS ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| 08/30126399 DC : DRAFT MAY 2008 | BS ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
| PD CEN/TR 14473:2014 | Transportable gas cylinders. Porous materials for acetylene cylinders |
| UNE-IEC 60050-212:2011 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
| BS ISO 18437-1:2012 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines |
| DIN EN ISO 13088:2013-01 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
| DIN EN ISO 3807:2015-02 | GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
| 17/30361469 DC : 0 | BS EN ISO 80000-8 - QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| 07/30126390 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT |
| 16/30300291 DC : 0 | BS ISO 19613 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT OF VISCOSITY OF CERAMIC SLURRY BY USE OF A ROTATIONAL VISCOMETER |
| BIS IS/IEC 80000-14 : 2008 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| I.S. EN 14531-1:2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| DD CEN/TR 13233 : 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
| UNI CEI ISO 80000-5 : 2009 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
| 16/30339669 DC : 0 | BS ISO 21010 - CRYOGENIC VESSELS - GAS/MATERIALS COMPATIBILITY |
| UNI CEI EN ISO 4375 : 2015 | HYDROMETRY - CABLEWAY SYSTEMS FOR STREAM GAUGING |
| BIS IS/ISO 80000-8 : 2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| ISO 9928-1:2015 | Cranes Crane operating manual Part 1: General |
| 08/30126370 DC : DRAFT APR 2008 | BS ISO 80000-1 - QUANTITIES AND UNITS - PART 1: GENERAL |
| UNI CEI EN ISO 80000-9 : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
| UNI EN ISO 13769 : 2009 | GAS CYLINDERS - STAMP MARKING |
| I.S. EN ISO 3807:2013 | GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING (ISO 3807:2013, CORRECTED VERSION 2013-11-15) |
| BS EN 14531-1 : 2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| UNE-EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
| I.S. EN ISO 80000-9:2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
| I.S. EN ISO 24431:2016 | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
| ISO 16249:2013 | Springs — Symbols |
| I.S. EN ISO 17871:2015 | GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
| ISO 18437-4:2008 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method |
| UNE-EN ISO 1183-1:2013 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| UNI CEI EN 80000-6 : 2009 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| I.S. EN 80000-14:2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| BS ISO 80000-7:2008 | Quantities and units Light |
| DIN EN ISO 24431:2015-08 (Draft) | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
| S.R. CEN TR 13233:2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
| ISO 18437-1:2012 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines |
| DIN EN ISO 12213-2:2010-01 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
| ISO 4375:2014 | Hydrometry Cableway systems for stream gauging |
| BS EN ISO 11810:2015 | Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition |
| 14/30262701 DC : 0 | BS EN ISO 17871 - GAS CYLINDERS - QUICK OPENING VALVES - SPECIFICATION AND TYPE TESTING |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| ISO 3807:2013 | Gas cylinders — Acetylene cylinders — Basic requirements and type testing |
| BS EN ISO 12213-2:2009 | Natural gas. Calculation of compression factor Calculation using molar-composition analysis |
| ISO 11810:2015 | Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Primary ignition, penetration, flame spread and secondary ignition |
| DIN EN ISO 80000-10:2013-08 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
| EN ISO 11372:2011 | Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
| DIN EN ISO 11810:2016-06 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015) |
| DIN SPEC 4002-102:2011-05 | PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |
| CEI UNI EN IEC 80000-6:2023 | Quantities and units Part 6: Electromagnetism |
| ISO 31-11:1992 | Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology |
| ISO 80000-3:2006 | Quantities and units Part 3: Space and time |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.