![header thumbnail](/images/publishers\nace_cover.gif)
NACE RP 01 76 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\nace_cover.gif)
CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
Hardcopy , PDF
10-03-2007
English
01-01-2003
1. General
2. Definitions
3. Structural Design for Corrosion Control
4. Criteria for Cathodic Protection
5. Design of Cathodic Protection Systems
6. Installation of Cathodic Protection Systems
7. Control of Interference Currents
8. Dielectric Shields
9. Operation and Maintenance of Cathodic Protection Systems
10. Splash Zone Corrosion Control Measures
11. Maintenance of Splash Zone Corrosion Control Measures
12. Surface Preparation
13. Coatings
14. Coatings Inspection
15. Corrosion Control Records
References
Bibliography
Appendix A - Typical Design Parameters for Offshore Petroleum
Production
Appendix B - Energy Capabilities and Consumption Rates of
Various Commercial Galvanic Anodes Available for
Cathodic Protection of Offshore Structures
Appendix C - Consumption Rates in Seawater of Various
Commercial Types of Impressed Current Anodes
Available for Cathodic Protection of Offshore
Structures
Appendix D - Typical Method for Calculation of Galvanic Anode
Current Output Using Initial, Maintenance, and
Final Current Densities
Appendix E - Typical Method of Calculation of Galvanic Anode
Current Output Using Design Slope and Maintenance
Current Density
Tables
Figures
Provides guidelines for establishing minimum requirements for the control of corrosion on steel fixed offshore structures associated with petroleum production, and on the external portions of associated oil and gas handling equipment.
Committee |
STG 30
|
DevelopmentNote |
Redesignated as NACE SP 01 76. (05/2007)
|
DocumentType |
Standard
|
Pages |
44
|
PublisherName |
National Association of Corrosion Engineers
|
Status |
Superseded
|
SupersededBy |
BS EN 61400-3:2009 | Wind turbines Design requirements for offshore wind turbines |
API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
07/30159562 DC : 0 | BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
API 14E : 1991 : R2013 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
DIN EN 12496:2014-02 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
CSA C61400-3 : 2011 : R2016 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
I.S. EN ISO 13628-15:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
BS EN ISO 19902 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
EN 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
API 16D : 2004 : R2013 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
UNI EN ISO 13628-15 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
API 14E CHINESE : 2007 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
CSA ISO 19904-1 : 2007 : R2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
NACE SP 01 08 : 2008 | CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
EN ISO 19902:2007/A1:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013) |
09/30172965 DC : 0 | BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
10/30234726 DC : 0 | BS EN 12496 - GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
UNI EN 12496 : 2013 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
03/314812 DC : DRAFT SEP 2003 | ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
NACE RP 06 75 : 1988 | CORROSION CONTROL OF OFFSHORE STEEL PIPELINES |
API 16D RUSSIAN : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
BS EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
15/30303554 DC : 0 | BS ISO 18647 - SPECIFICATIONS FOR OFFSHORE MODULAR DRILLING RIGS ON FIXED PLATFORMS |
API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
API RP 14E : 1991 | RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS |
API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
API 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
EN ISO 13628-1:2005/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
EN ISO 13628-4:2010/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
BS EN ISO 13703 : 2001 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
UNE-EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
ISO 13703:2000 | Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms |
ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
IEC 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
NACE RP 03 87 : 0 | METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS |
CSA ISO 19904-1 : 2007 : R2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
CSA ISO 19904-1 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
API 16D CHINESE : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
CSA C61400-3 : 2011 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
API 16D:2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
I.S. EN 12496:2013 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
I.S. EN 61400-3:2009 | WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES |
API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
EN ISO 13703:2000/AC:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS |
BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
NACE 30105 : 0 | ELECTRICAL ISOLATION/CONTINUITY AND COATING ISSUES FOR OFFSHORE PIPELINE CATHODIC PROTECTION SYSTEMS |
UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
NACE 3 : 2007 | COMMERCIAL BLAST CLEANING |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
NACE 7L198 : 2009 | DESIGN OF GALVANIC ANODE CATHODIC PROTECTION SYSTEMS FOR OFFSHORE STRUCTURES |
NACE RP 03 87 : 0 | METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS |
ASTM G 153 : 2013 : REDLINE | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
MIL A 18001 : K | ANODES, SACRIFICIAL ZINC ALLOY |
MIL-STD-2138 Revision A:1992 | METAL SPRAYED COATINGS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS |
ASTM D 2247 : 2015 : REDLINE | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
ASTM G 152 : 2013 : REDLINE | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
NACE 4 : 2007 | BRUSH-OFF BLAST CLEANING |
SSPC-SP 6 : 2015 | COMMERCIAL BLAST CLEANING |
ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
NACE RP 01 69 : 2002 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
SSPC-SP 5 : 2015 | WHITE METAL BLAST CLEANING |
ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
NACE RP 02 87 : 2002 | FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
SSPC-SP 7 : 2015 | BRUSH-OFF BLAST CLEANING |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.