NASA KSC DE 512-SM : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
Published date
01-01-2012
Superseded date
01-08-2024
Superseded by
Sorry this product is not available in your region.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS, ABBREVIATIONS, AND DEFINITIONS
4. GENERAL REQUIREMENTS
5. DESIGN AND CONSTRUCTION REQUIREMENTS
6. MATERIALS AND PROCESSES REQUIREMENTS
APPENDIX A - GROUND SYSTEM IDENTIFICATION COLORS
APPENDIX B - DELIVERABLES
APPENDIX C - REFERENCE DOCUMENTS
Sets up requirements and guidance for design and fabrication of ground systems (GS) that includes: ground support equipment (GSE), ground support systems (GSS), and facility ground support systems (F-GSS) to provide uniform methods and processes for design and development of robust, safe, reliable, maintainable, supportable, and cost-effective GS in support of space flight and institutional programs and projects.
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NASA KSC NE 10074 : 2013 | ELECTRICAL GROUND SUPPORT EQUIPMENT (EGSE) QUALIFICATION TEST PLAN |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| NASA KSC STD Z 0004 : 2002 | STRUCTURAL DESIGN, STANDARD FOR |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
| NASA KSC GP 986 : 1993 | DESIGN CRITERIA FOR REUSABLE SPACE VEHICLE UMBILICAL SYSTEMS |
| SAE AMSDTL23053/5A | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| MIL HDBK 17-5 : 0 | COMPOSITE MATERIALS HANDBOOK - VOLUME 5: CERAMIC MATRIX COMPOSITES |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| SAE AMS2404G | Plating, Electroless Nickel |
| NASA STD 8719.9 : 2015 | LIFTING STANDARD |
| NASA KSC GP 986 : 1993 | DESIGN CRITERIA FOR REUSABLE SPACE VEHICLE UMBILICAL SYSTEMS |
| SAE AS8090A | Mobility, Towed Aerospace Ground Equipment, General Requirements For |
| NASA KSC STD E 0011 : 2009 | ELECTRICAL POWER RECEPTACLES AND PLUGS, STANDARD FOR |
| NASA KSC STD G 0003 : 1988 | QUALIFICATION OF LAUNCH SUPPORT AND FACILITY COMPONENTS, STANDARD FOR |
| NASA STD 8739.5 : 2015 | WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| NASA KSC GP 425 : 1997 | FLUID FITTING ENGINEERING STANDARDS |
| IEEE 1187-2013 REDLINE | IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| MIL-STD-101 Revision C:2014 | Color Code for Pipelines and for Compressed Gas Cylinders |
| NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
| ASME B31.1 : 2016 | POWER PIPING |
| MIL-PRF-39012 Revision F:2014 | Connectors, Coaxial, Radio Frequency, General Specification for |
| NASA STD 8739.1 : 2016 | WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| ASTM E 2217 : 2012 : REDLINE | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| NASA STD 8739.3 : 1998 | SOLDERED ELECTRICAL CONNECTIONS |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| NASA KSC SPEC Z 0008 : 1978 | FABRICATION AND INSTALLATION OF FLARED TUBE ASSEMBLIES AND INSTALLATION OF FITTINGS AND FITTING ASSEMBLIES, SPECIFICATION FOR |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE AMS2770M | Heat Treatment of Wrought Aluminum Alloy Parts |
| SAE AS4787 | Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware |
| NASA STD 8739.2 : 1999 | WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY |
| SAE AMS2647E | Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| IEEE 1106-2015 REDLINE | IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications |
| MIL-HDBK-700 Revision A:1975 | Plastics |
| NASA STD 4003 : 2013 | ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| NASA KSC NE 9187 : 2008 | SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS |
| NASA KSC SPEC Z 0009 : 1991 | LUBRICATION, THREAD, CORROSION-RESISTANT STEEL AND ALUMINUM ALLOY TUBE FITTINGS, SPECIFICATION FOR |
| MIL-STD-1686 Revision C:1995 | Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) (S/S by ANSI/ESD S20.20) |
| NASA KSC STD Z 0008 : 1996 | DESIGN OF GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, STANDARD FOR |
| ANSI C18.2M-1 : 2013 | PORTABLE RECHARGEABLE CELLS AND BATTERIES - GENERAL AND SPECIFICATIONS |
| ASME B31.3:2016 | PROCESS PIPING |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| SAE AMS2759E | Heat Treatment of Steel Parts General Requirements |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| SAE ARP1176A | Oxygen System and Component Cleaning |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| NASA MSFC STD 486 : 1992 | STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR |
| NEMA ICS 61800-2:2005 | Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems |
| NASA KSC STD E 0004 : 2008 | PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR |
| ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| MIL-STD-464 Revision C:2010 | Electromagnetic Environmental Effects Requirements for Systems |
| MIL-HDBK-17-3 Revision F:2002 | Composite Materials Handbook Volume 3. Polymer Matrix Composites Materials Usage, Design, and Analysis (S/S by SAE-R424)) |
| SAE AMS2460A | Plating, Chromium |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| NASA KSC STD P 0006 : 1995 | QUICK RELEASE PINS AND PIN TETHERS, STANDARD FOR |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| SAE AMS2423E | Plating, Nickel Hard Deposit |
| ASME PV CODE 10 : 2017 | BOILER AND PRESSURE VESSEL CODE - FIBER-REINFORCED PLASTIC PRESSURE VESSELS |
| NASA KSC DF 107 : 2017 | TECHNICAL DOCUMENTATION STYLE GUIDE |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| NASA KSC SPEC P 0027 : 2010 | TUBING, SUPERAUSTENITIC STEEL, CORROSION RESISTANT, UNS N08367 AND UNS S31254, SEAMED, BRIGHT ANNEALED, PASSIVATED, SPECIFICATION FOR |
| NASA KSC STD Z 0009 : 1994 | DESIGN OF CRYOGENIC GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| SAE AMS2772G | Heat Treatment of Aluminum Alloy Raw Materials |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| NASA STD 8739.4 : 2016 | WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING |
| MIL-HDBK-17-4 Revision A:2002 | Composite Materials Handbook - Volume 4 Metal Matrix Composites |
| NASA MSFC STD 3029 : 2000 | GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS |
| SAE AS50151C | Connectors, Electrical, Circular Threaded, AN Type, General Specification For |
| NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-HDBK-263 Revision B:1994 | Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) (Metric) (S/S by ESD TR20.20) |
| MIL-DTL-16878 Revision H:2012 | Wire, Electrical, Insulated, General Specification for |
| NASA KSC STD E 0002 : 2009 | HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| SAE ARP1658B | Hose Assemblies, Installed, Visual Inspection Guide For |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| NASA JSC 29353 : 2014 | FLAMMABILITY CONFIGURATION ANALYSIS FOR SPACECRAFT APPLICATIONS |
| SAE AS50861A | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy |
| IEEE 484-2002 | IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| SAE AMSH81200D | Heat Treatment of Titanium and Titanium Alloys |
| ANSI C18.3M-1 : 2013 | PORTABLE LITHIUM PRIMARY CELLS AND BATTERIES - GENERAL AND SPECIFICATIONS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| SAE AMS2759/9D | Hydrogen Embrittlement Relief (Baking) of Steel Parts |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| NASA HDBK 1001 : 0 | TERRESTRIAL ENVIRONMENT (CLIMATIC) CRITERIA HANDBOOK FOR USE IN AEROSPACE VEHICLE DEVELOPMENT |
| NASA KSC GP 435 VOL 1 : 2014 | ENGINEERING DRAWING PRACTICES - VOLUME 1: AEROSPACE AND GROUND SUPPORT EQUIPMENT |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| NASA KSC DD 818-TR : 1984 | SUMMARY OF MEASUREMENTS OF KSC LAUNCH-INDUCED ENVIRONMENT EFFECTS (STS-1 THROUGH STS-2) |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| SAE ARP1247D | Aircraft Ground Support Equipment — General Requirements |
| NASA KSC STD E 0015 : 1992 | MARKING OF GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA MSFC SPEC 445 : 1990 | ADHESIVE BONDING, PROCESS AND INSPECTION, REQUIREMENTS FOR |
| ASTM D 7194 : 2012 : REDLINE | Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
| MIL-HDBK-149 Revision B:1984 | Rubber |
| SAE AMS2774E | Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| ANSI/NEMA C50.41 : 2012 | POLYPHASE INDUCTION MOTORS FOR POWER GENERATION STATIONS |
| ASME B31.9 : 2014 | BUILDING SERVICES PIPING |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| SAE AMS2403M | Plating, Nickel General Purpose |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| NASA MSFC STD 156 : 1962 | RIVETING, FABRICATING AND INSPECTION, STANDARD FOR |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA SPEC 5004 : 0 | WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
| AIAA R 100 : A 2001 | RECOMMENDED PRACTICE FOR PARTS MANAGEMENT |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
| NASA KSC SPEC P 0012 : 1979 | REFRACTORY CONCRETE, SPECIFICATION FOR |
| NASA KSC STD SF 0004 : 2015 | SAFETY STANDARD FOR GROUND PIPING SYSTEMS COLOR CODING AND IDENTIFICATION |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| MIL-HDBK-6870 Revision B:2012 | Nondestructive Inspection Program Requirements for Aircraft and Missile Materials and Parts |
| NASA KSC MMA 1985-79 : REV 6 | STANDARD TEST METHOD FOR EVALUATING TRIBOELECTRIC CHARGE GENERATION AND DECAY |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| MIL-HDBK-17-1 Revision F:2002 | Composite Materials Handbook Volume 1 - Polymer Matrix Composites Guidelines or Characterization of Structural Materials (S/S by SAE-R422) |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| NASA MSFC SPEC 164 : 2010 | CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR |
| NASA KSC STD 141 : 1989 | LOAD TEST IDENTIFICATION AND DATA MARKING STANDARD FOR |
| NASA STD 5009 : 2008 | NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE-CRITICAL METALLIC COMPONENTS - MEASUREMENT SYSTEM IDENTIFICATION: METRIC (INCH-POUND) |
| NASA KSC STD Z 0010 : 1983 | DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| NASA KSC SPEC Z 0007 : 1994 | TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
| SAE ARP4402 | Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure |
| ASCE 7 98 : 2000 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| MIL-HDBK-17-2 Revision F:2002 | Composite Materials Handbook Volume 2. Polymer Matrix Composites Materials Properties (S/S by SAE-R423)) |
| NASA KSC STD 164 : 1992 | ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.