NASA STD 8719.24 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
26-11-2022
01-01-2011
VOLUME 1: POLICIES AND PROCEDURES
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - RESPONSIBILITIES AND AUTHORITIES
CHAPTER 3 - RANGE SAFETY POLICY
CHAPTER 4 - PSWG and RANGE SAFETY PROCESSES
CHAPTER 5 - SAFETY AUTHORIZATIONS, SAFETY
APPROVALS, AND DOCUMENTATION
CHAPTER 6 - INVESTIGATING AND REPORTING MISHAPS
AND INCIDENTS
CHAPTER 7 - CHANGES TO THIS PUBLICATION
ATTACHMENT 1 - THE NASA ELV PAYLOAD SAFETY
REQUIREMENTS TAILORING PROCESS
ATTACHMENT 2 - SYSTEM SAFETY PROGRAM
REQUIREMENTS
ATTACHMENT 3 - SUBMITTING NONCOMPLIANCE
REQUESTS
ATTACHMENT 4 - ACCEPTABLE RISK CRITERIA
VOLUME 3: PAYLOADS AND GROUND SYSTEMS
REQUIREMENTS
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - RESPONSIBILITIES AND AUTHORITIES
CHAPTER 3 - GENERAL DESIGN POLICY
CHAPTER 4 - DOCUMENTATION REQUIREMENTS
CHAPTER 6 - MATERIAL HANDLING EQUIPMENT AND
PERSONNEL WORK PLATFORMS
CHAPTER 7 - ACOUSTIC HAZARDS
CHAPTER 8 - NON-IONIZING RADIATION SOURCES
CHAPTER 9 - RADIOACTIVE (IONIZING) RADIATION
SOURCES
CHAPTER 10 - HAZARDOUS MATERIALS
CHAPTER 11 - GROUND SUPPORT PRESSURE, VACUUM,
AND HAZARDOUS STORAGE SYSTEMS
CHAPTER 12 - FLIGHT HARDWARE PRESSURE SYSTEMS
AND PRESSURIZED STRUCTURES
CHAPTER 13 - ORDNANCE SYSTEMS
CHAPTER 14 - ELECTRICAL AND ELECTRONIC EQUIPMENT
CHAPTER 15 - MOTOR VEHICLES
CHAPTER 16 - COMPUTER SYSTEMS AND SOFTWARE
CHAPTER 17 - WESTERN RANGE SEISMIC DESIGN
CHAPTER 18 - SOLID ROCKET MOTORS, ROCKET MOTOR
SEGMENTS, AND ROCKET MOTOR COMPONENTS
ATTACHMENT 1 - SAFETY DATA PACKAGE (MISSILE SYSTEM
PRELAUNCH SAFETY PACKAGE)
ATTACHMENT 2 - HANDLING STRUCTURES INITIAL AND
PERIODIC TEST REQUIREMENT FLOWPATH
ATTACHMENT 3 - HAZARD AREA CLASSIFICATION
VOLUME 6: GROUND AND LAUNCH PERSONNEL, EQUIPMENT,
SYSTEMS, AND MATERIAL OPERATIONS SAFETY
REQUIREMENTS
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - RESPONSIBILITIES AND AUTHORITIES
CHAPTER 3 - GROUND OPERATIONS POLICIES
CHAPTER 4 - DOCUMENTATION REQUIREMENTS
CHAPTER 5 - GROUND OPERATIONS SAFETY REQUIREMENTS
CHAPTER 6 - MATERIAL HANDLING EQUIPMENT, CRANE
AND HOIST, PERSONNEL PLATFORM, POWERED
INDUSTRIAL TRUCK, AND ELEVATOR OPERATIONS
CHAPTER 7 - ACOUSTIC HAZARD OPERATIONS
CHAPTER 8 - NON-IONIZING RADIATION OPERATIONS
CHAPTER 9 - RADIOACTIVE (IONIZING) RADIATION SOURCES
OPERATIONS
CHAPTER 10 - HAZARDOUS MATERIALS OPERATIONS
CHAPTER 11 - GROUND SUPPORT AND FLIGHT HARDWARE
PRESSURE SYSTEMS OPERATIONS
CHAPTER 12 - RESERVED
CHAPTER 13 - ORDNANCE OPERATIONS
CHAPTER 14 - ELECTRICAL SYSTEMS OPERATIONS
CHAPTER 15 - MOTOR VEHICLE OPERATIONS
CHAPTER 16 - CONVOY OPERATIONS
CHAPTER 17 - LAUNCH OPERATIONS
CHAPTER 18 - SOLID ROCKET MOTORS AND ROCKET, ROCKET
MOTOR SEGMENTS, AND ROCKET MOTOR OPERATIONS
ATTACHMENT 1 - GROUND OPERATIONS PLANS
ATTACHMENT 2 - HAZARDOUS AND SAFETY CRITICAL
PROCEDURES
ATTACHMENT 3 - INDEX OF OPERATIONS/AREAS SAFETY
PLANS
ATTACHMENT 4 - INDEX OF EXPLOSIVE (OPERATING AND
AREA) SAFETY PLANS
ATTACHMENT 5 - MISCELLANEOUS SAFETY PLANS
ATTACHMENT 7 - LAUNCH COMMIT CRITERIA
VOLUME 7: GLOSSARY OF REFERENCES AND SUPPORTING
INFORMATION
Sets up the safety requirements for NASA payloads launched on unmanned Expendable Launch Vehicles (ELVs).
DevelopmentNote |
Annex to NASA STD 8719.24 is available separately, see NASA STD 8719.24 ANNEX. (03/2017)
|
DocumentType |
Standard
|
PublisherName |
National Aeronautics and Space Administration
|
Status |
Superseded
|
SupersededBy |
NASA STD 8729.1 : 2017 | NASA RELIABILITY AND MAINTAINABILITY (R&M) STANDARD FOR SPACEFLIGHT AND SUPPORT SYSTEMS |
NASA SPEC 5022:2015 | NASA MANUFACTURING AND TEST REQUIREMENTS FOR NORMALLY CLOSED PYROVALVES FOR HAZARDOUS FLIGHT SYSTEMS APPLICATIONS |
NASA STD 8719.9 : 2015 | LIFTING STANDARD |
NASA STD 8719.14 : 2011 | PROCESS FOR LIMITING ORBITAL DEBRIS |
ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
MIL HDBK 5 : G_VOL2 | METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES |
ASME B30.20 : 2013 | Below-the-Hook Lifting Devices (B30.20 - 2013) |
ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
ASME B30.9 : 2014 | SLINGS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
NASA STD 8719.9 : 2015 | LIFTING STANDARD |
NAS1514:2011 | RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES |
NASA KSC GP 425 : 1997 | FLUID FITTING ENGINEERING STANDARDS |
NASA KSC SPEC Z 0006 : 1995 | INDUCTION BRAZING, AEROSPACE TUBING FITTINGS, SPECIFICATION FOR |
ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
SIA A92.6 : 2006(R2014) | SELF-PROPELLED ELEVATING WORK PLATFORMS |
ASME B40.1 : 1991 | GAUGES - PRESSURE INDICATING DIAL TYPE - ELASTIC ELEMENT |
SIA A92.3 : 2006(R2014) | MANUALLY PROPELLED ELEVATING WORK PLATFORMS |
MIL-PRF-25567 Revision E:1998 | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS |
NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
CFR 49(PTS1000-1199) : 0 | TRANSPORTATION - INTERSTATE COMMERCE COMMISSION |
NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
NASA KSC SPEC Z 0008 : 1978 | FABRICATION AND INSTALLATION OF FLARED TUBE ASSEMBLIES AND INSTALLATION OF FITTINGS AND FITTING ASSEMBLIES, SPECIFICATION FOR |
ANSI/ASSE Z359.1 : 2007 | THE FALL PROTECTION CODE |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
MIL-STD-1540 Revision D:1999 | TEST REQUIREMENTS FOR LAUNCH, UPPER-STAGE, AND SPACE VEHICLES |
NFPA 101 : 2018 | LIFE SAFETY CODE |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
CFR 40(PTS61-71) : JUL 96 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
ASME B31.3:2016 | PROCESS PIPING |
CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
CFR 29(PTS1920-END) : 1986 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
IEEE/ISO/IEC 12207-2008 | ISO/IEC/IEEE International Standard - Systems and software engineering -- Software life cycle processes |
NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
ANSI Z136.2 : 2012 | SAFE USE OF OPTICAL FIBER COMMUNICATION SYSTEMS UTILIZING LASER DIODE AND LED SOURCES |
MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
NASA STD 7002 : 0 | PAYLOAD TEST REQUIREMENTS |
NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
ANSI Z136.1 : 2014 | SAFE USE OF LASERS |
IEEE 315 : 1975 | GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS) |
ASME PV CODE 10 : 2017 | BOILER AND PRESSURE VESSEL CODE - FIBER-REINFORCED PLASTIC PRESSURE VESSELS |
NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
NASA STD 5019 : 2016 | FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE |
NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
NASA MSFC STD 3029 : 2000 | GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
ASME B30.5 : 2014 | MOBILE AND LOCOMOTIVE CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
MIL-STD-882 Revision E:2012 | System Safety |
ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
NASA STD 5006 : 2015 | GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
SIA A92.2 : 2015 | VEHICLE MOUNTED ELEVATING AND ROTATING AERIAL PLATFORM |
NASA STD 8719.13B : 2004 | **DUPLICATE RECORD** |
NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
IEEE C95.1-2005 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
MIL-STD-1576 Base Document:1984 | ELECTROEXPLOSIVE SUBSYSTEM SAFETY REQUIREMENTS AND TEST METHODS FOR SPACE SYSTEMS |
NASA MSFC STD 1249 : 1985 | NDE GUIDELINES AND REQUIREMENTS FOR FRACTURE CONTROL PROGRAMS |
MS33584 Revision C:1990 | TUBING END, STANDARD DIMENSIONS FOR FLARED |
NASA STD 7001 : 2011 | PAYLOAD VIBROACOUSTIC TEST CRITERIA |
ANSI Z358.1 : 2014 | EMERGENCY EYEWASH AND SHOWER EQUIPMENT |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
ANSI Z136.6 : 2015 | SAFE USE OF LASERS OUTDOORS |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ASTM F 51/F51M : 2000 | TEST METHOD FOR SIZING AND COUNTING PARTICULATE CONTAMINANT IN AND ON CLEAN ROOM GARMENTS |
ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
NACE RP 02 85 : 2002 | CORROSION CONTROL OF UNDERGROUND STORAGE TANK SYSTEMS BY CATHODIC PROTECTION |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 77 : 2014 | STATIC ELECTRICITY |
ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
MIL-HDBK-6870 Revision B:2012 | NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
ANSI A10.14 : 1991 | REQUIREMENTS FOR SAFETY BELTS, HARNESSES, LANYARDS AND LIFELINES |
SIA A92.5 : 2006(R2014) | BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
MIL-C-43122 Revision G:1988 | CLOTH, SATEEN, COTTON, FLAME RETARDANT TREATED |
NASA STD 8739.8 : 2004 | SOFTWARE ASSURANCE STANDARD |
ASTM A 304 : 2016 : REDLINE | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
AWS D17.1/D17.1M : 2012 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
NASA STD 5009 : 2008 | NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE-CRITICAL METALLIC COMPONENTS - MEASUREMENT SYSTEM IDENTIFICATION: METRIC (INCH-POUND) |
CFR 49(PTS100-185) : 0 | TRANSPORTATION |
NASA KSC SPEC Z 0007 : 1994 | TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
CFR 29(PTS1927-END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ANSI/ASSE Z244.1 : 2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.