PREN 1127-1 : DRAFT 2017
Current
Current
The latest, up-to-date edition.
EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Risk assessment
5 Possible ignition sources
6 Risk reduction
7 Information for use
Annex A (informative) - Information for
the use of tools in potentially
explosive atmospheres
Annex B (informative) - Tightness of
equipment
Annex C (normative) - Verification procedure
for the threshold limit of ultrasound
in liquids
Annex D (informative) - Significant technical
changes between this document and the
previous edition of this European
Standard
Annex ZA (informative) - Relationship between
this European Standard and the essential
requirements of EU Directive 2014/34/EU
aimed to be covered
Annex ZB (informative) - Relationship between this
European Standard and the essential
requirements of Directive 2006/42/EC aimed
to be covered
Bibliography
Describes methods for the identification and assessment of hazardous situations leading to explosion and the design and construction measures appropriate for the required safety.
| Committee |
TC 305
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| 17/30365866 DC : DRAFT NOV 2017 | Identical |
| EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| EN 50053-2 : 1989 | REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC POWDER SPRAY GUNS WITH AN ENERGY LIMIT OF 5 MJ AND THEIR ASSOCIATED EQUIPMENT |
| EN 15089:2009 | Explosion isolation systems |
| EN 14034-2:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
| EN 50053-3 : 1989 | REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC FLOCK SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ OR 5MJ AND THEIR ASSOCIATED APPARATUS |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
| EN 15794:2009 | Determination of explosion points of flammable liquids |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 15188:2007 | Determination of the spontaneous ignition behaviour of dust accumulations |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 14373:2005 | Explosion suppression systems |
| EN ISO 80079-36:2016 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN 50053-1 : 1987 | REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC PAINT SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ AND THEIR ASSOCIATED APPARATUS |
| EN 14034-3:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
| EN 14797:2006 | Explosion venting devices |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| EN 60079-10-2:2015 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| EN 14983:2007 | Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| EN 14491:2012 | Dust explosion venting protective systems |
| EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN 1839:2017 | Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours |
| EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| CLC/TR 50426:2004 | Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 60079-31:2014 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
| EN 61340-4-4:2012/A1:2015 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012) |
| EN 13463-2:2004 | Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
| EN 14034-1:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
| EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
| EN 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| EN 50281-2-1 : 98 COR 99 | Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| EN 14034-4:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| EN 60079-30-2:2017 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
| EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| CEN/TR 15281:2006 | Guidance on Inerting for the Prevention of Explosions |
| EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
| EN 62127-1:2007/A1:2013 | ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-1:2007/A1:2013) |
| EN 13821:2002 | Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
| EN ISO 80079-37:2016 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
| EN ISO 16852:2016 | Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.