PREN 14592 : DRAFT 2017
Current
Current
The latest, up-to-date edition.
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
Published date
04-07-2017
Publisher
Sorry this product is not available in your region.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 General requirements for fasteners
6 Specific requirements for fasteners
7 Assessment and Verification of Constancy
of Performance (AVCP)
8 Marking
Annex A (informative) - Proving performance
equivalence of alternative corrosion protection
and selection of corrosion resistance and
accelerated testing
Annex B (informative) - Corrosivity of atmospheric
environments indoor and outdoor - outside the timber
and inside the timber
Annex C (normative) - Proposal for measuring zinc thicknesses
Annex D (informative) - Selection of test specimens - Requirements
on wood density
Annex E (normative) - Test to determine seismic performance
Annex ZA (informative) - Relationship of this European Standard
with Regulation (EU) No. 305/2011
Bibliography
Defines the requirements for the following types of dowel-type fasteners: nails, staples, screws, dowels, and bolts with nuts.
| Committee |
TC 124
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| 17/30357371 DC | Identical |
| 06/30149612 DC : 0 | EN 409 - TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF THE YIELD MOMENT OF DOWEL TYPE FASTENERS |
| 06/30149615 DC : 0 | EN 1380 - TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS |
| 03/315081 DC : DRAFT SEP 2003 | EN 14732-2 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - PART 2: PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN ISO 780:2015 | Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| ISO/TR 16335:2013 | Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| ISO 4016:2011 | Hexagon head bolts — Product grade C |
| ISO 9224:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ISO 10666:1999 | Drilling screws with tapping screw thread — Mechanical and functional properties |
| EN ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
| EN 10277-2:2008 | Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes |
| ISO 1463:2003 | Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 1382:2016 | Timber Structures - Test methods - Withdrawal capacity of timber fasteners |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 2081:2008 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
| EN ISO 6988:1994 | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| EN ISO 9223:2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012) |
| EN ISO 1460:1994 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992) |
| EN ISO 10666:1999 | Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999) |
| ISO 780:2015 | Packaging — Distribution packaging — Graphical symbols for handling and storage of packages |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 3497:2000 | Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 15737:2009 | Timber Structures - Test methods - Torsional resistance of driving in screws |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| EN 338:2016 | Structural timber - Strength classes |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| ISO 1460:1992 | Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area |
| EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| ISO 21968:2005 | Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method |
| EN 409:2009 | Timber structures - Test methods - Determination of the yield moment of dowel type fasteners |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| EN ISO 9224:2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) |
| ISO 6988:1985 | Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.