UL 60730-1:5ED 2016-08-03
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Automatic Electrical Controls - Part 1: General Requirements
Hardcopy
31-10-2024
03-08-2016
In general, this part of IEC 60730 applies to automatic ELECTRICAL CONTROLS for use in, on, or in association with equipment for household and similar use.
DevelopmentNote |
Supersedes UL 8730-1 (09/2001)
|
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Underwriters Laboratories
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
UL 60730-2-9:4ED 2017-02-14 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
CSA C22.2 No. 107.3 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS |
UL 1647:6ED 2015-08-03 | Motor-Operated Massage and Exercise Machines |
CSA C22.2 No. 104 : 2011 : R2015 | HUMIDIFIERS |
ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
UL 429:7ED 2013-11-06 | Electrically Operated Valves |
UL 508A:3ED 2018-04-24 | Industrial Control Panels |
UL 737:10ED 2011-04-25 | Standard for Fireplace Stoves |
UL 1431:3ED 2011-03-23 | Personal Hygiene and Health Care Appliances |
UL 1727:5ED 2012-05-21 | Commercial Electric Personal Grooming Appliances |
UL 943B:3ED 2017-12-04 | Appliance Leakage-Current Interrupters |
UL 697:7ED 2011-03-03 | Toy Transformers |
UL 1815:5ED 2012-02-29 | Nonducted Heat Recovery Ventilators |
UL 296:11ED 2017-02-24 | Oil Burners |
NEMA DC 3:2013 | Residential Controls—Electrical Wall-Mounted Room Thermostats |
ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
UL 1740:4ED 2018-01-26 | Robots and Robotic Equipment |
UL 507:10ED 2017-11-09 | Electric Fans |
CSA C22.2 No. 284 : 2016 | NONINDUSTRIAL PHOTOELECTRIC SWITCHES FOR LIGHTING CONTROL |
CSA C22.2 No. 112 : 2015 | ELECTRIC CLOTHES DRYERS |
UL 506:14ED 2017-06-02 | Specialty Transformers |
UL 756:8ED 2016-08-25 | Standard for Coin and Currency Changers and Actuators |
UL 2106:2ED 2006-04-18 | Standard for Field Erected Boiler Assemblies |
UL 1559:5ED 2011-03-21 | Insect-Control Equipment - Electrocution Type |
UL 458:6ED 2015-09-02 | Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts |
UL 621:7ED 2010-05-07 | Ice Cream Makers |
UL 1083:6ED 2009-01-09 | Household Electric Skillets and Frying-Type Appliances |
UL 291:6ED 2012-02-15 | Automated Teller Systems |
UL 907:4ED 2016-03-11 | Standard for Fireplace Accessories |
UL 555S:5ED 2014-02-13 | Smoke Dampers |
UL 963:4ED 2016-02-26 | Standard for Sealing, Wrapping, and Marking Equipment |
UL 2108:2ED 2015-12-07 | Low Voltage Lighting Systems |
UL 795:8ED 2016-12-02 | Commercial-Industrial Gas Heating Equipment |
C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
UL 1963:4ED 2011-06-01 | Refrigerant Recovery/Recycling Equipment |
UL 1236:8ED 2015-04-21 | Battery Chargers for Charging Engine-Starter Batteries |
UL 150:4ED 2004-11-09 | Antenna Rotators |
UL 773A:6ED 2016-01-19 | Nonindustrial Photoelectric Switches for Lighting Control |
UL 763:5ED 2018-02-28 | Motor-Operated Commercial Food Preparing Machines |
UL 730:5ED 2003-08-29 | Oil-Fired Wall Furnaces |
UL 923:7ED 2013-05-01 | Microwave Cooking Appliances |
UL 1018:6ED 2011-04-29 | Electric Aquarium Equipment |
UL 499:14ED 2014-11-07 | Electric Heating Appliances |
UL 283:3ED 2015-06-16 | Air Fresheners and Deodorizers |
UL 1778:5ED 2014-06-13 | Uninterruptible Power Systems |
UL 391:5ED 2010-09-10 | Standard for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces |
UL 896:5ED 1993-07-29 | Oil-Burning Stoves |
UL 729:6ED 2003-08-29 | Oil-Fired Floor Furnaces |
UL 555:7ED 2006-07-12 | Fire Dampers |
UL 462:3ED 2010-12-13 | Standard for Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances |
UL 916:5ED 2015-10-22 | Energy Management Equipment |
UL 731:6ED 2018-01-31 | Oil-Fired Unit Heaters |
UL 1795:5ED 2016-09-02 | Standard for Hydromassage Bathtubs |
UL 791:5ED 2006-11-10 | Residential Incinerators |
UL 858:16ED 2014-11-07 | Household Electric Ranges |
UL 696:10ED 2010-02-17 | Standard for Electric Toys |
ANSI Z83.21 : 2016 | COMMERCIAL DISHWASHERS |
CSA C22.2 No. 167 : 2017 | HOUSEHOLD DISHWASHERS |
CSA C22.2 No. 169 : 2015 | ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
CSA C22.2 No. 168 : 2016 | COMMERCIAL DISHWASHERS |
CSA C22.2 No. 104:2011 | HUMIDIFIERS |
UL 482:9ED 2005-09-02 | Standard for Portable Sun/Heat Lamps |
UL 1447:6ED 2017-10-13 | Standard for Electric Lawn Mowers |
UL 1563:6ED 2009-07-16 | Electric Spas, Equipment Assemblies, and Associated Equipment |
UL 82:9ED 2017-08-31 | Electric Gardening Appliances |
UL 541:9ED 2016-04-21 | Refrigerated Vending Machines |
UL 1482:7ED 2011-04-25 | Solid-Fuel Type Room Heaters |
UL 508:18ED 2018-03-30 | Industrial Control Equipment |
UL 1090:7ED 2016-10-05 | Electric Snow Movers |
UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
UL 73:10ED 2011-03-02 | Standard for Motor-Operated Appliances |
CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500 | HUMIDIFIERS |
C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
SAE J3030_201507 | Automotive Refrigerant Recovery/Recycling/Recharging Equipment Intended for use with Both R-1234yf and R-134a |
ANSI Z21.5.1-2017/CSA 7.1-2017 | Gas clothes dryers, volume I, type 1 clothes dryers |
CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60038:2009 | IEC standard voltages |
UL 863:8ED 2007-11-16 | Standard for Time-Indicating and -Recording Appliances |
IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 60738-1:2006+AMD1:2009 CSV | Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
UL 514A:11ED 2013-02-01 | Metallic Outlet Boxes |
IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
UL 50:13ED 2015-10-16 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
UL 5085-3:1ED 2006-04-17 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
UL 486D:6ED 2015-06-19 | Sealed Wire Connector Systems |
IEC 60998-2-3:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
UL 4200A:1ED 2015-02-10 | Products Incorporating Button Batteries or Coin Cell Batteries |
IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
UL 1283:7ED 2017-05-17 | Electromagnetic Interference Filters |
IEC 62151:2000 | Safety of equipment electrically connected to a telecommunication network |
IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
UL 917:5ED 2006-11-10 | Standard for Clock-Operated Switches |
IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV | Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
UL 635:3ED 2012-03-08 | Insulating Bushings |
IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
UL 514C:4ED 2014-04-08 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
IEC 60384-17:2005 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
IEC 60738-1-1:2008 | Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ |
IEC 60099-1:1991+AMD1:1999 CSV | Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
UL 372:6ED 2007-07-31 | Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
UL 746A:6ED 2012-09-06 | Polymeric Materials - Short Term Property Evaluations |
UL 429:7ED 2013-11-06 | Electrically Operated Valves |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
UL 1577:5ED 2014-04-25 | Optical Isolators |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
IEC 60384-16:2005 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.