ISO 11202:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
|
EN 81-43:2009
|
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
|
EN 1993-6:2007/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
|
EN ISO 11204:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
|
EN 12385-4:2002+A1:2008
|
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
|
EN 13557:2003+A2:2008
|
Cranes - Controls and control stations
|
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment
|
ISO 11660-5:2001
|
Cranes — Access, guards and restraints — Part 5: Bridge and gantry cranes
|
EN 60947-5-5 : 1997 AMD 2 2016
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
|
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
|
ISO 15513:2000
|
Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors
|
EN 13155:2003+A2:2009
|
Cranes - Safety - Non-fixed load lifting attachments
|
EN 60825-1:2014/AC:2017-06
|
SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
|
ISO 12480-1:1997
|
Cranes — Safe use — Part 1: General
|
ISO 9926-1:1990
|
Cranes — Training of drivers — Part 1: General
|
EN 12644-2:2000+A1:2008
|
Cranes - Information for use and testing - Part 2: Marking
|
ISO 9374-5:1991
|
Cranes Information to be provided Part 5: Overhead travelling cranes and portal bridge cranes
|
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
|
EN 894-2:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
|
EN 1991-3:2006/AC:2012
|
EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY
|
EN 349:1993+A1:2008
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
ISO 12488-1:2012
|
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
|
HD 60364-4-41:2017/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
|
IEC 60204-11:2000
|
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
|
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements
|
IEC 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
ISO 16881-1:2005
|
Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General
|
EN 13586:2004+A1:2008
|
Cranes - Access
|
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
|
EN 614-1:2006+A1:2009
|
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
|
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
|
EN 12644-1:2001+A1:2008
|
Cranes - Information for use and testing - Part 1: Instructions
|
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction
|
ISO 9374-1:1989
|
Cranes Information to be provided Part 1: General
|
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
|
EN 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
|
EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
|
EN 13001-2:2014
|
Crane safety - General design - Part 2: Load actions
|
ISO 4309:2010
|
Cranes Wire ropes Care and maintenance, inspection and discard
|
EN 13001-1:2015
|
Cranes - General design - Part 1: General principles and requirements
|
EN ISO 3744:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
|
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
|
ISO 6336-1:2006
|
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
|
ISO 11203:1995
|
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
|
EN 13157:2004+A1:2009
|
Cranes - Safety - Hand powered cranes
|
EN 14492-2:2006+A1:2009/AC:2010
|
CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
|
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
|
ISO 2631-1:1997
|
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
|
EN 60204-11:2000/corrigendum:2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
|
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
|
ISO 4301-1:2016
|
Cranes — Classification — Part 1: General
|
ISO 22986:2007
|
Cranes — Stiffness — Bridge and gantry cranes
|
EN 795:2012
|
Personal fall protection equipment - Anchor devices
|
ISO 8566-5:2017
|
Cranes — Cabins and control stations — Part 5: Overhead travelling and portal bridge cranes
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
|
ISO 12482-1:1995
|
Cranes Condition monitoring Part 1: General
|
EN ISO 11202:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
|
EN ISO 11203:2009
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
|
ISO 7752-5:1985
|
Lifting appliances Controls Layout and characteristics Part 5: Overhead travelling cranes and portal bridge cranes
|
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
|
ISO 11204:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
|
PREN 13001-3-3 : DRAFT 2012
|
CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
|
ISO 10245-5:1995
|
Cranes — Limiting and indicating devices — Part 5: Overhead travelling and portal bridge cranes
|
CEN/TS 13001-3-2:2008
|
Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
|
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV
|
Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function
|
EN 894-1:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
|