UNI EN 746-1 : 2009
Current
The latest, up-to-date edition.
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
08-10-2009
Foreword
Introduction
1 Scope
2 Normative references
2.1 Basic Standards
2.2 Group Safety Standards
2.3 Product Safety Standards
3 Definitions
4 List of Hazards
5 Safety requirements, measures and verification means
5.1 General
5.2 Mechanical
5.3 Electrical
5.4 Thermal
5.5 Noise
5.6 Vibration
5.7 Radiation
5.8 Materials and substances
5.9 Ergonomics
5.10 Hazard combination
5.11 Malfunction
5.12 Missing and incorrectly fitted safety devices
6 Information for use
6.1 General
6.2 Marking
6.3 Technical Data, Installation and Commissioning
6.4 Instruction Handbook (Operation)
6.5 Instruction Handbook (Maintenance)
6.6 Instruction handbook (De-commissioning)
Annex A (informative) - List of Industrial Thermoprocessing
Equipment covered by EN 746-1
Annex B (informative) - Typical test report (as described
in 6.3.10)
Annex C (informative) - PERMIT to work certificate (as
described in 6.5.8)
Annex D (informative) - Used Definitions
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Describes common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1: 2003
DevelopmentNote |
REPLACES WITH PTS 2 & 3 UNI 7728
|
DocumentType |
Standard
|
PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 746-1 : 1997 + A1 2010 | Identical |
DIN EN 746-1:2010-02 | Identical |
I.S. EN 746-1:1997 | Identical |
NBN EN 746-1 : 1997 + A1 2009 | Identical |
BS EN 746-1 : 1997 | Identical |
NF EN 746-1 : 1997 + A1 2009 | Identical |
UNE-EN 746-1:1997 | Identical |
NEN EN 746-1 : 1997 + A1 2010 | Identical |
NS EN 746-1 : 1997 + A1 2009 | Identical |
EN 746-1:1997+A1:2009 | Identical |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
IEC 60519-3:2005 | Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations |
EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO 7243:2017 | Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
IEC 60519-7:2008 | Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns |
EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
IEC 60519-8:2005 | Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces |
EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
IEC 60519-6:2011 | Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment |
IEC 60519-2:2006 | Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment |
EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
EN 60519-6:2011 | Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment |
ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
EN 746-8:2000 | Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment |
EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
EN 746-4:2000 | Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment |
EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
ISO 11690-2:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures |
IEC 60405:2003 | Nuclear instrumentation - Constructional requirements and classification of radiometric gauges |
EN 746-3:1997+A1:2009 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
EN 60519-4:2013 | SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013) |
ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
EN 60519-3:2005 | Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN ISO 11690-2:1996 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
EN 746-5:2000 | Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment |
EN 60519-8:2005 | Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces |
EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
EN 60519-9:2005 | Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
PREN 746-7 : DRAFT 1994 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - SPECIAL SAFETY REQUIREMENTS FOR VACCUUM THERMOPROCESSING EQUIPMENT |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
IEC 60519-9:2005 | Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
IEC TS 60519-5:2008 | Safety in electroheat installations - Part 5: Specifications for safety in plasma installations |
IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
EN 60519-2:2006 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT |
IEC 60519-4:2013 | Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.