VDE 0804 : 1989 AMD 1 1992
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS
Superseded date
23-11-2022
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
1 Anwendungsbereich und Zweck
2 Allgemeine Begriffe
3 Begriffe für Betriebsgrössen und Bemessungswerte
4 Allgemeines zu den Anforderungen
5 Allgemeines zur Typprüfung
6 Allgemeines zur Stückprüfung
7 Allgemeines zum Schutz gegen gefährliche Körperströme
8 Schutz gegen gefährliche Körperströme durch direktes
Berühren
9 Schutz gegen gefährliche Körperströme im Fehlerfall
(indirektes Berühren)
9.1 Allgemeines
9.2 Zusätzliche Anforderungen an Geräte der
Schutzklasse I
9.3 Zusätzliche Anforderungen an Geräte
der Schutzklasse II
9.4 Zusätzliche Anforderungen an Stromkreise mit
Kleinspannungen SELV oder PELV
10 Isolierungen
11 Luftstrecken
11.1 Bemessen der Luftstrecken
11.2 Bemessen der Luftstrecken nach
Spannungsbeanspruchung
11.3 Bemessen der Luftstrecken nach mechanischer
Beanspruchung
12 Kriechstrecken
12.1 Bemessen der Kriechstrecken
12.2 Verschmutzungsgrade
12.3 Kriechstromfestigkeit der Isolierstoffe
12.4 Bemessungsspannungen
13 Feste Isolierungen
14 Bauteile
15 Leitungen
16 Anschlüsse und Verbindungen
17 Bestückte Leiterplatten
18 Aufschriften und Anleitungen
19 Typprüfung der mechanischen Festigkeit
20 Typprüfung der Isolierung: Allgemeines
21 Typprüfung der Isolierung: Messen der Abstände
22 Typprüfung und Stückprüfung der Isolierung:
Elektrische Prüfungen
22.1 Grundlagen für die Typprüfung der Isolierung
22.2 Messung des Isolationswiderstands bei der
Typprüfung
22.3 Typprüfung auf Durchschlag
22.4 Spannungsprüfung mit 50 Hz auf Teilentladungen (TE)
an Bauteilen bei der Typ- bzw Stückprüfung
22.5 Stückprüfung auf Durchschlag
23 Ableitstrommessung
24 Verschärfte Umgebungsbedingungen; Anforderungen und
Prüfungen
25 Schutz gegen zu hohe Erwärmung
26 Schutz vor sich bewegenden Teilen
27 Schutz gegen Strahlung, Implosion und Explosion
28 Gehörschutz
Anhang A Übersicht zur Typprüfung
Anhang B Umgebungsbedingungen für Räume und
Verschmutzungsgrade
Anhang C Bemessungsspannungen für Isolierungen zur sicheren
Trennung
Anhang D Ermittlung periodischer Überspannungen Ü[pp]
Anhang E Prüfgenerator für Stossspannungs prüfung auf
Durchschlag
Anhang F Prüfspannungen für Sonderfälle
Anhang G Messung der Teilentladungen (TE) mit dem
Störmessgerät
Anhang H Messkreise für die Ableitstrommessung
Zitierte Normen und andere Unterlagen
Weitere Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen
Internationale Patentklassifikation
Specifies the safety requirements for the building and testing of telecommunications equipment.
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN VDE 0804 : 1989 AMD 1 1992 | Identical |
| DIN 66348-1:1986-09 | Interfaces and basic data link control procedures for serial measurement data communication; start-stop-transmission, point-to-point connection |
| DIN 41747-2:1976-02 | STABILIZED POWER SUPPLIES; MEASURING METHODS, POWER SUPPLIES WITH AC OUTPUT |
| DIN 66258-1:1983-02 | INTERFACES AND BASIC DATA LINK CONTROL PROCEDURES FOR DATA COMMUNICATION - C-S-INTERFACE, V-S-INTERFACE |
| DIN 57800-3 : 1983 | TELECOMMUNICATION; TELECOMMUNICATION FACILITIES WITH REMOTE SUPPLY |
| DIN 41747-1:1976-02 | STABILIZED POWER SUPPLIES; MEASURING METHODS, POWER SUPPLIES WITH DE OUTPUT |
| DIN VDE 0558-1 : 1987 | SEMICONDUCTOR CONVERTORS - GENERAL SPECIFICATIONS AND PARTICULAR SPECIFICATIONS FOR LINE-COMMUTATED CONVERTORS |
| DIN 57100-736 : 1983 | ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES UP TO 1000 V; LOW VOLTAGES CIRCUITS IN HIGH-VOLTAGE SWITCHBOARDS |
| DIN VDE 0114 : 1980 | ELECTRICAL EQUIPMENT OF INDUSTRIAL SEWING MACHINES |
| DIN 57850 : 1980 | COUPLING DEVICES FOR POWER LINE CARRIER SYSTEMS |
| VDE 0551 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
| VDE 0850 : 1980 | COUPLING DEVICES FOR POWER LINE CARRIER SYSTEMS |
| VDE 0100-736 : 1983 | ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES UP TO 1000 V; LOW VOLTAGES CIRCUITS IN HIGH-VOLTAGE SWITCHBOARDS |
| VDE 0805 : 2001 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| VDE 0114 : 1980 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| DIN EN 60742 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
| DIN 57100-410 : 1983 | ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES UP TO 1000 V; PROTECTIVE MEASURES; PROTECTION AGAINST ELECTRIC SHOCK |
| DIN 66258-2:1987-01 | INTERFACE AND BASIC DATA LINK CONTROL PROCEDURES FOR DATA COMMUNICATION - BALANCED INTERFACE FOR START-STOP TRANSMISSION USING BASIC DATA LINK CONTROL PROCEDURES ON POINT-TO-POINT CONNECTION |
| DIN 14651:1979-05 | MANUAL CALL POINT D FOR USE IN DRY ROOMS |
| DIN 50021:1988-06 | SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS |
| IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| DIN VDE 0609-1 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2] |
| DIN VDE 0627 : 1986 | CONNECTORS AND PLUG-AND SOCKET DEVICES - FOR RATED VOLTAGES UP 1000 V A.C., UP TO 1200 V D.C. AND RATED CURRENTS UP TO 500 A FOR EACH POLE |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| DIN 40052:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF SOLID FOREIGN BODIES, DUST CHAMBER |
| DIN 49462-2:1972-02 | ORDINARY, SPLASH PROOF AND WATERTIGHT MULTI-POLE PLUGS WITH EARTHING CONTACT AND SHROUD, 16 AND 32 A, OVER 42 UP TO 750 V |
| DIN VDE 0800-5 : 1991 | TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR POWER SUPPLY |
| VDI 2263:2017-02 (Draft) | Dust fires and dust explosions - Hazards, assessment, protective measures |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| DIN VDE 0820-1 : 1992 | MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINK |
| DIN VDE 0560-2 : 1970 | SPECIFICATION FOR CAPACITORS - PART 2: COUPLING CAPACITORS FOR VOLTAGES UP TO 1000 V AND POWERS UP TO 0.5 KVAR |
| DIN 40040:1987-04 | APPLICABILITY CLASSES AND RELIABILITY FIGURES FOR COMPONENTS OF TELECOMMUNICATION AND ELECTRONICS |
| DIN IEC 60068-2-32:1984-05 | BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS, TEST Ed: FREE FALL |
| DIN IEC 60038 : 2002 | IEC STANDARD VOLTAGES |
| IEC 60127:1974 | Cartridge fuse-links for miniature fuses |
| DIN 31000 : 1979 | GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS |
| DIN VDE 0110-2 : 1989 | ISOLATIONSKOORDINATION FUER ELEKTRISCHE BETRIEBSMITTEL IN NIEDERSPANNUNGSANLAGEN; BEMESSUNG DER LUFT- UND KRIECHSTRECKEN |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| DIN 40011:1989-08 | ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT |
| IEC 60364-5-523:1999 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems |
| DIN VDE 0816-1 : 88 COR 1 2002 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; CABLES INSULATED AND SHEATHED WITH POLYETHYLENE, UNIT STRANDED |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| DIN 85:1990-08 | SLOTTED PAN HEAD SCREWS; PRODUCT GRADE A |
| DIN VDE 0848-2 : 1984 | HAZARDS BY ELECTROMAGNETIC FIELDS - PROTECTION OF PERSONS IN THE FREQUENCY RANGE FROM 10 KHZ TO 3000 GHZ |
| DIN 50015:1975-08 | CLIMATES AND THEIR TECHNICAL APPLICATION; CONSTANT TEST ATMOSPHERES |
| DIN 40014 : 1985 | PROTECTIVE INSULATION; GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT; PLATES |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| DIN IEC 60068-2-6:1990-06 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST Fc AND GUIDANCE: VIBRATION (SINUSOIDAL) |
| DIN VDE 0800-2 : 1985 | TELECOMMUNICATIONS - EARTHING AND EQUIPOTENTIAL BONDING |
| DIN IEC 60068-2-40:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS |
| DIN VDE 0878-2 : 1988 | RADIO INTERFERENCE SUPPRESSION OF TELECOMMUNICATION EQUIPMENT; EQUIPMENT IN TELECOMMUNICATION OPERATING ROOMS |
| DIN 50016:1962-12 | TESTING OF MATERIALS, STRUCTURAL COMPONENTS AND EQUIPMENT; METHOD OF TEST IN DAMP ALTERNATING ATMOSPHERE |
| DIN VDE 0470-1 : 1992 | |
| IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
| DIN VDE 0100-510 : 2014-10 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005, MODIFIED) |
| DIN VDE 0812 : 1988 | EQUIPMENT WIRES AND STRANDED EQUIPMENT WIRES FOR TELECOMMUNICATIONS SYSTEMS AND DATA PROCESSING SYSTEMS |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
| DIN IEC 60326-3:1993-09 | PRINTED BOARDS - PART 3: DESIGN AND USE OF PRINTED BOARDS |
| DIN VDE 0881 : 1986 | EQUIPMENT WIRES AND FLEXIBLE EQUIPMENT WIRES WITH EXTENDED TEMPERATURE RANGE FOR TELECOMMUNICATION SYSTEMS AND DATA PROCESSING SYSTEMS |
| DIN 46254-1:1982-05 | SOLDERLESS CONNECTIONS FOR TELECOMMUNICATION CORDS CRIMP CONNECTIONS - REQUIREMENTS, TEST METHODS |
| DIN VDE 0815 : 85 AMD 1 88 | WIRING CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS |
| IEC 60215:2016 | Safety requirements for radio transmitting equipment - General requirements and terminology |
| IEC 60790:1984 | Oscilloscopes and peak voltmeters for impulse tests |
| DIN VDE 0100 : 1973 | ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES BELOW 1000 V |
| DIN IEC 60068-1:1990-11 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL AND GUIDANCE |
| DIN 41566-1:1987-07 | REVERSIBLE 60 V TRIPPING DEVICES FOR USE IN TELECOMMUNICATION; DIMENSIONS, TECHNICAL VALUES, REQUIREMENTS |
| DIN 50035-1:1989-03 | TERMS AND DEFINITIONS USED ON AGEING OF MATERIALS; BASIC TERMS AND DEFINITIONS |
| DIN V 40046-37:2006-08 | ENVIRONMENTAL TESTING - PART 37: TESTS - TEST KY: HYDROGEN SULPHIDE LOW CONCENTRATION FOR CONTACTS AND CONNECTIONS |
| DIN VDE 0845-1 : 1987 | PROTECTION OF TELECOMMUNICATION SYSTEMS AGAINST LIGHTNING, ELECTROSTATIC DISCHARGES AND OVER-VOLTAGES FROM ELECTRIC POWER INSTALLATIONS; PROVISIONS AGAINST OVER-VOLTAGES |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| VDE 0301-1 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| DIN VDE 0100-540 : 2012-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011) |
| DIN 49462-3:1972-02 | PROVISIONS FOR MECHANICAL INTERLOCKING FOR ORDINARY, SPLASH PROOF AND WATERTIGHT MULTIPOLE SOCKET-OUTLETS AND CONNECTORS, 16 AND 32 A, OVER 42 UP TO 750 V |
| DIN 49463-1:1977-05 | SPLASH PROOF AND WATERTIGHT MULTI-POLE SOCKET-OUTLETS WITH EARTHING CONTACT AND SHROUD, 63 AND 125 A, OVER 42 UP TO 750 V |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| DIN VDE 0800-1 : 1989 | TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS |
| DIN 30600:1985-11 | GRAPHICAL SYMBOLS - REGISTRATION, DESIGNATION |
| DIN IEC 60068-2-17 : 1991 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST Q: SEALING |
| DIN VDE 0837 : 1986 | STRAHLUNGSSICHERHEIT VON LASER-EINRICHTUNGEN; KLASSIFIZIERUNG VON ANLAGEN, ANFORDERUNGEN, BENUTZER-RICHTLINIEN |
| DIN 43620-1:1984-05 | LOW VOLTAGE HIGH RUPTURING CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE LINKS FOR 500 & 660 V A.C. & 440 V D.C. |
| ISO 1207:2011 | Slotted cheese head screws Product grade A |
| DIN VDE 0298-4 : 1998 | APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 4: RECOMMENDED CURRENT-CARRYING CAPACITY FOR SHEATHED AND NONSHEATHED CABLES FOR FIXED WIRINGS IN AND AROUND BUILDINGS AND FOR FLEXIBLE CABLES AND CORDS |
| DIN VDE 0100-430:2010-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
| VDE 0820-2 : 2015 | MINIATURE FUSES - PART 2: CARTRIDGE FUSE-LINKS (IEC 60127-2:2014) |
| DIN VDE 0800-8 : 1989 | TELECOMMUNICATIONS; APPLICATION OF KU VALUES |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DIN VDE 0432-5 : 1987 | HIGH-VOLTAGE TEST TECHNIQUES - PART 5: OSCILLOSCOPE AND PEAK VOLTMETERS FOR IMPULSE TEST |
| DIN VDE 0298-3 : 2006-06 | APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 3: GUIDE TO USE OF NON-HARMONIZED CABLES |
| ISO 1580:2011 | Slotted pan head screws Product grade A |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| DIN 49300:1979-03 | D-TYPE FUSES; SYNOPSIS |
| DIN VDE 0813 : 1988 | SWITCHBOARD CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS |
| DIN VDE 0609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM(HOCH)2 - CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM(HOCH)2 |
| DIN 40046-7:1976-07 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST GROUP E, TEST E[A]: SHOCK |
| DIN 40720:1987-09 | ELECTRICAL COMMUNICATION ENGINEERING; IDENTIFICATION COLOURS OF WIRES IN CHASSIS AND APPARATUS |
| IEC 60685-1:1980 | Connecting devices (junction and/or tapping) for household and similar fixed electrical installations - Part 1: General requirements |
| VDE 0170-1 : 2014 | EXPLOSIONSGEFAEHRDETE BEREICHE - TEIL 0: BETRIEBSMITTEL - ALLGEMEINE ANFORDERUNGEN (IEC 60079-0:2011, MODIFIZIERT +COR.:2012+COR.:2013) |
| DIN VDE 0817 : 1990 | CABLES WITH STRANDED CONDUCTORS FOR INCREASED MECHANICAL STRESS FOR TELECOMMUNICATIONS SYSTEMS AND DATA PROCESSING SYSTEMS |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| DIN VDE 0434 : 1983 | PARTIAL DISCHARGE MEASUREMENTS |
| DIN VDE 0100-200 : 2006-06 | LOW-VOLTAGE INSTALLATIONS - PART 200: DEFINITIONS |
| DIN VDE 0816-2 : 1988 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; SIGNAL AND MEASURING CABLES, MINING CABLES |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| DIN 49462-1:1972-02 | ORDINARY, SPLASH PROOF AND WATERTIGHT MULTI-POLE SOCKET-OUTLETS WITH EARTHING CONTACT AND SHROUD, 16 AND 32 A, OVER 42 UP TO 750 V |
| DIN VDE 0800-9 : 1989 | TELECOMMUNICATIONS; KU-VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS |
| DIN VDE 0891-1 : 1990 | USE OF CABLES AND INSULATED WIRES FOR TELECOMMUNICATION SYSTEMS AND INFORMATION PROCESSING SYSTEMS - GENERAL DIRECTIONS |
| DIN 49360-2:1986-08 | D TYPE FUSES; E 16 500 V FUSE-LINKS |
| DIN V 40046-36:2006-08 | ENVIRONMENTAL TESTING - PART 36: TESTS - TEST KX: SULPHUR DIOXIDE LOW CONCENTRATION FOR CONTACTS AND CONNECTIONS |
| DIN IEC 60068-2-2:1980-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TESTS B: DRY HEAT |
| DIN VDE 0800-10 : 1991 | TELECOMMUNICATIONS; TRANSITIONAL REQUIREMENTS ON ERECTION AND OPERATION OF INSTALLATIONS |
| DIN 50014:1985-07 | CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| DIN 84:1990-08 | SLOTTED CHEESE HEAD SCREWS; PRODUCT GRADE A |
| DIN VDE 0866 : 1989 | SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
| ISO 3768:1976 | Metallic coatings — Neutral salt spray test (NSS test) |
| DIN VDE 0814 : 1981 | CORDS FOR TELECOMMUNICATION SYSTEMS AND INFORMATION PROCESSING SYSTEMS |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| DIN VDE 0876-1 : 1978 AMD 1980 | RADIO INTERFERENCE MEASURING APPARATUS - RADIO INTERFERENCE MEASURING RECEIVER WITH WEIGHTED INDICATION AND ACCESSORIES |
| DIN 31001-1:1983-04 | SAFETY DESIGN OF TECHNICAL PRODUCTS - SAFETY DEVICES - CONCEPTS, SAFETY DISTANCES FOR ADULTS AND CHILDREN |
| DIN IEC 60068-2-41:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
| DIN IEC 60068-2-13:1985-08 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST M: LOW AIR PRESSURE |
| DIN VDE 0701-240 : 1986 | REPAIR, MODIFICATION AND INSPECTION OF ELECTRICAL APPLIANCES; SAFETY REQUIREMENTS FOR DATA PROCESSING EQUIPMENT AND OFFICE MACHINES |
| DIN 49463-2:1977-05 | SPLASH PROOF AND WATERTIGHT MULTI-POLE PLUGS WITH EARTHING-CONTACT AND SHROUD, 63 AND 125A, OVER 42 UP TO 750V |
| DIN 50905-4:1987-01 | CORROSION OF METALS - CORROSION TESTING - PART 4: PERFORMANCE OF CHEMICAL CORROSION EXPERIMENTS WITHOUT MECHANICAL STRESSES IN LIQUIDS IN THE LABORATORY |
| DIN VDE 0106-100 : 1983 | PROTECTION AGAINST ELECTRIC SHOCK - ACTUATING MEMBERS POSITIONED CLOSE TO PARTS LIABLE TO SHOCK |
| DIN V 8418:1988-02 | USER'S INFORMATION; REFERENCES FOR THE PRESENTATION |
| DIN V 40046-47:1986-11 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST GROUP L: DUST AND SAND; TEST LB EFFECT OF DUST (FREE SETTLING) |
| DIN 40008-3:1985-02 | ELECTRICAL ENGINEERING; SAFETY SIGNS; WARNING PLATES AND SUPPLEMENTARY PLATE |
| ENV 41003 : 1988 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORK |
| DIN VDE 0625-1 : 1987 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES |
| DIN VDE 0166 : 81 AMD 1 87 | ELECTRICAL INSTALLATIONS AND EQUIPMENT FOR USE IN ATMOSPHERES POTENTIALLY ENDANGERED BY EXPLOSIVE MATERIAL |
| DIN VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK; REQUIREMENTS, TEST |
| DIN IEC 60112 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN VDE 0816-3 : 1988 COR 2 2010 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; PAPER INSULATED CABLES |
| VDE 1000:2017-04 | GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.