VDI 3405 Blatt 2:2013-08
Current
Current
The latest, up-to-date edition.
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-08-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Testing powdered materials
6 Metallographic test methods
7 Density
8 Determining the mechanical
characteristics
9 Surface quality
10 Form, dimensional and positional
tolerances
11 Non-destructive testing
12 Post-production processes
13 Heat treatment
Annex
Bibliography
The guideline provides recommendations for the testing of various properties of generatively manufactured metal components.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 3405-2-1 : 2015 COR 2017 | ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG |
| VDI 3405 Blatt 3:2015-12 | Additive manufacturing processes, rapid manufacturing - Design rules for part production using laser sintering and laser beam melting |
| VDI 3405:2014-12 | Additive manufacturing processes, rapid manufacturing - Basics, definitions, processes |
| VDI 3405 Blatt 2.3:2017-07 (Draft) | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Characterisation of powder raw material |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| DIN 66111:1989-02 | PARTICLE SIZE ANALYSIS; SEDIMENTATION ANALYSIS; PRINCIPLES |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
| VDI 3404:2009-12 | Additive fabrication - Rapid technologies (rapid prototyping) - Fundamentals, terms and definitions, quality parameters, supply agreements |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| DIN EN ISO 286-1:2010-11 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| DIN EN 13320:2002-09 | SURFACE ACTIVE AGENTS - GAS CHROMATOGRAPHIC TRACE DETERMINATION OF FREE ETHYLENE OXIDE IN ETHOXYLATES |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| DIN 66115:1983-02 | PARTICLE SIZE ANALYSIS; SEDIMENTATION ANALYSIS IN THE GRAVITATIONAL FIELD; PIPETTE METHOD |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| DIN EN 473:2008-09 | NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| ISO 12106:2017 | Metallic materials — Fatigue testing — Axial-strain-controlled method |
| DIN ISO 4497:1991-04 | METALLIC POWDERS - DETERMINATION OF PARTICLE SIZE BY DRY SIEVING |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ASTM B 213 : 2017 : REDLINE | Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel |
| EN 10351:2011 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| EN ISO 4490:2014 | Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014) |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| ISO 3953:2011 | Metallic powders — Determination of tap density |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ISO 15579:2000 | Metallic materials Tensile testing at low temperature |
| DIN 50113:1982-03 | TESTING OF METALLIC MATERIALS; ROTATING BENDING FATIGUE TEST |
| DIN EN ISO 9934-1:2016-07 (Draft) | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 1: GENERAL PRINCIPLES (ISO 9934-1:2016) |
| ISO 4497:1983 | Metallic powders Determination of particle size by dry sieving |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| DIN EN ISO 148-1:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| DIN EN 571-1:1997-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
| DIN EN ISO 3369:2010-08 | Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006) |
| DIN EN ISO 7438:2016-07 | Metallic materials - Bend test (ISO 7438:2016) |
| ISO 7438:2016 | Metallic materials Bend test |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| EN ISO 3953:2011 | Metallic powders - Determination of tap density (ISO 3953:2011) |
| DIN 50100:2015-11 (Draft) | LOAD CONTROLLED FATIGUE TESTING - EXECUTION AND EVALUATION OF CYCLIC TESTS AT CONSTANT LOAD AMPLITUDES ON METALLIC SPECIMENS AND COMPONENTS |
| DIN EN ISO 643:2015-06 (Draft) | STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012) |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| DIN EN 16016-2:2012-01 | NON DESTRUCTIVE TESTING - RADIATION METHODS - COMPUTED TOMOGRAPHY - PART 2: PRINCIPLE, EQUIPMENT AND SAMPLES |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| ISO 3369:2006 | Impermeable sintered metal materials and hardmetals — Determination of density |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| ISO 10076:1991 | Metallic powders Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement |
| DIN EN 10351:2011-05 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| DIN ISO 15579:2002-06 | METALLIC MATERIALS - TENSILE TESTING AT LOW TEMPERATURE |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| DIN EN ISO 4490:2014-11 | METALLIC POWDERS - DETERMINATION OF FLOW RATE BY MEANS OF A CALIBRATED FUNNEL (HALL FLOWMETER) (ISO 4490:2014) |
| DIN EN 13068-3:2001-12 | NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES FOR THE RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X- AND GAMMA RAYS |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| DIN EN 10247:2016-02 (Draft) | MICROGRAPHIC EXAMINATION OF THE NON-METALLIC INCLUSION CONTENT OF STEELS USING STANDARD PICTURES |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ISO 4490:2014 | Metallic powders Determination of flow rate by means of a calibrated funnel (Hall flowmeter) |
| EN 16016-2:2011 | Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| EN 13320:2002 | Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates |
| ISO 3923-1:2008 | Metallic powders Determination of apparent density Part 1: Funnel method |
| DIN 50602:1985-09 | METALLOGRAPHIC TEST METHODS; MICROSCOPIC EXAMINATION OF SPECIAL STEELS USING STANDARD DIAGRAMS TO ASSESS THE CONTENT OF NON-METALLIC INCLUSIONS |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN ISO 3923-1:2010 | Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008) |
| EN 13068-3:2001 | Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
| DIN 50125:2009-07 | TESTING OF METALLIC MATERIALS - TENSILE TEST PIECES |
| EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| DIN EN 10052:1994-01 | VOCABULARY OF HEAT TREATMENT TERMS FOR FERROUS PRODUCTS |
| EN ISO 3369:2010 | Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006) |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.