Skip to content
Please enter a keyword to search

  • UNE-EN 10088-2:2015

    Current The latest, up-to-date edition.

    Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

    Available format(s):  Hardcopy, PDF

    Language(s):  Spanish, Castilian, English

    Published date:  18-03-2015

    Publisher:  Asociacion Espanola de Normalizacion

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Definitions
    3.1 Stainless steels
    3.2 Product forms
    3.3 Types of heat treatment
    4 Dimensions and tolerances on dimensions
    5 Calculation of mass and tolerances on mass
    6 Designation and ordering
    6.1 Designation of steel grades
    6.2 Designation to be used on ordering
    7 Classification of grades
    8 Requirements
    8.1 Production process
    8.2 Delivery condition
    8.3 Chemical composition
    8.4 Chemical corrosion properties
    8.5 Mechanical properties
    8.6 Surface quality
    8.7 Internal soundness
    9 Testing
    9.1 General
    9.2 Agreement on tests and inspection documents
    9.3 Specific inspection and testing
    9.4 Test methods
    9.5 Retests
    10 Marking
    Annexes
    A (informative) Guidelines for further treatment
        (including heat treatment) in fabrication
    B (informative) Applicable dimensional standards
    C (informative) Bibliography


    Abstract - (Show below) - (Hide below)

    Defines the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.

    General Product Information - (Show below) - (Hide below)

    Committee CTN 36
    Development Note Supersedes UNE 36016-2. (07/2003)
    Document Type Standard
    Publisher Asociacion Espanola de Normalizacion
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE 27271:2012 Civil shipbuilding and ship repairing. Standardised components. Ladders: Vertical ladder (stainless steel)
    UNE 62353:2010 Horizontal cylindrical single skin and double skin steel tanks for the underground and aboveground storage of liquid, having a diameter larger than 3 000 mm

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 9445:2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form
    ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
    EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
    EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
    EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
    EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
    EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    EN ISO 9445-2:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
    ISO 9444-2:2009 Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate
    EN 10079:2007 Definition of steel products
    EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
    CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    ISO 15510:2014 Stainless steels Chemical composition
    EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
    ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
    EN ISO 9444-2:2010 Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
    EN ISO 9445-1:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
    EN 10151:2002 Stainless steel strip for springs - Technical delivery conditions
    EN 10168:2004 Steel products - Inspection documents - List of information and description
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
    EN 10095:1999 Heat resisting steels and nickel alloys
    EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
    EN 10163-1:2004/AC:2007 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
    ISO 9445-2:2009 Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet
    EN 10021:2006 General technical delivery conditions for steel products
    ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 10307:2001 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
    EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
    EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
    EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
    ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
    EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
    ISO 18286:2008 Hot-rolled stainless steel plates — Tolerances on dimensions and shape
    EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
    ISO 9445-1:2009 Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths
    ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
    ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective