• There are no items in your cart

04/30105027 DC : DRAFT JUNE 2004

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ISO 21789 - GAS TURBINES - SAFETY

Superseded date

30-04-2009

Published date

23-11-2012

Foreword
1 Scope
2 Normative references
3 Definitions
4 List of significant hazards
5 Safety requirements
  5.1 General
  5.2 Risk assessment
  5.3 Lifetime
  5.4 Hazard combinations - Gases, mists and liquids
  5.5 Noise
  5.6 Mechanical
  5.7 Combustion air
  5.8 Fuel systems
  5.9 Combustion supervision
  5.10 Exhausts and Vents
  5.11 Enclosures
  5.12 Lightning
  5.13 Fire precautions
  5.14 Hazardous area classification and explosion prevention
  5.15 Ventilation
  5.16 Fans
  5.17 Gas detection
  5.18 Control systems
  5.19 Electrical
  5.20 Drains and vents
  5.21 Pressure equipment
  5.22 Auxilary systems
  5.23 Installation in a hazardous area
  5.24 Unenclosed turbines in a hall
  5.25 Decommissioning and disposal
6 Compliance verification
  6.1 Quality Assurance
  6.2 Verification of Safety Requirements
7 Information for use
  7.1 General
  7.2 Language
  7.3 Packaging
  7.4 Commissioning
  7.5 Operation
  7.6 Enclosure access
  7.7 Maintenance
  7.8 Warning signs and notices
  7.9 Permit to Work (PTW)
  7.10 Training
  7.11 Decommissioning and disposal
Annex A (Informative) List of significant hazards
Annex B (Normative) Verification
Bibliography

Committee
MCE/16
DocumentType
Draft
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

IEC 61025:2006 Fault tree analysis (FTA)
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
ISO 12499:1999 Industrial fans Mechanical safety of fans Guarding
ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
NFPA 2001 : 2015 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
IEC 61547:2009 Equipment for general lighting purposes - EMC immunity requirements
AGMA 6011 : I SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 6183:2009 Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation
IEC 60695-1-1:1999 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
CR 13445-7:2002 Unfired pressure vessels - Part 7: Guidance on the use of the conformity procedures
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60079-19:2010+AMD1:2015 CSV Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
ISO 11086:1996 Gas turbines — Vocabulary
PD IEC 60079-20:2000 Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
ISO 3977-9:1999 Gas turbines — Procurement — Part 9: Reliability, availability, maintainability and safety
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 14123-1:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
ANSI B11.3 : 2012 SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
ISO/TR 13387-7:1999 Fire safety engineering Part 7: Detection, activation and suppression
NFPA 68 : 2013 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
NFPA 12 : 2015 CARBON DIOXIDE EXTINGUISHING SYSTEMS
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
ISO 14121:1999 Safety of machinery Principles of risk assessment
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
IEC 61511-2:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 9001:2015 Quality management systems — Requirements
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 14520-1:2015 Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
EN 54-1:2011 Fire detection and fire alarm systems - Part 1: Introduction
IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
ISO 6385:2016 Ergonomics principles in the design of work systems
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
EN 1838:2013 Lighting applications - Emergency lighting
ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.