Skip to content
Please enter a keyword to search

  • ISO 3977-3:2004

    Current The latest, up-to-date edition.

    Gas turbines — Procurement — Part 3: Design requirements

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  24-08-2004

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 3977-3:2004 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.

    It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.

    ISO 3977-3:2004 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.

    In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), ISO 3977-3:2004 provides a basis.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 192
    Development Note Supersedes ISO/FDIS 3977-3 (08/2004)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    17/30368249 DC : 0 BS ISO 20816-4 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 4: GAS TURBINES IN EXCESS OF 3 MW, WITH FLUID-FILM BEARINGS
    UNI ISO 10816-4 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
    BS ISO 26382:2010 Cogeneration systems. Technical declarations for planning, evaluation and procurement
    BS ISO 3977-8:2002 Gas turbines. Procurement Inspection, testing, installation and commissioning
    06/30157092 DC : 0 ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
    BS ISO 10816-4 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    09/30190941 DC : DRAFT JAN 2009 BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
    BS EN ISO 3977-5:2003 Gas turbines. Procurement Applications for petroleum and natural gas industries
    ISO 19859:2016 Gas turbine applications Requirements for power generation
    ISO 21789:2009 Gas turbine applications — Safety
    04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
    16/30341590 DC : 0 BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    BS ISO 20816-2:2017 Mechanical vibration. Measurement and evaluation of machine vibration Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    BS ISO 3977-5 : 2002 AMD 14278 GAS TURBINES - PROCUREMENT - APPLICATIONS FOR PETROLEUM AND NATURAL GAS INDUSTRIES
    BS ISO 21789:2009 Gas turbine applications — Safety
    ISO 26382:2010 Cogeneration systems — Technical declarations for planning, evaluation and procurement
    ISO 19372:2015 Microturbines applications — Safety
    UNI ISO 7919-4 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    16/30337263 DC : 0 BS ISO 20816-2 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 2: LAND-BASED GAS TURBINES, STEAM TURBINES AND GENERATORS IN EXCESS OF 40 MW, WITH FLUID-FILM BEARINGS
    16/30341596 DC : 0 BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    BS ISO 3977-4:2002 Gas turbines. Procurement Fuels and environment
    09/30190938 DC : DRAFT JAN 2009 BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    ISO 3977-7:2002 Gas turbines Procurement Part 7: Technical information
    BS ISO 7919-4 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
    ISO 20816-2:2017 Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    BS ISO 19372:2015 Microturbines applications. Safety
    ISO 3977-5:2001 Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries
    BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
    EN ISO 3977-5:2003 Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
    ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
    ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
    I.S. EN ISO 3977-5:2003 GAS TURBINES - PROCUREMENT - PART 5: APPLICATIONS FOR PETROLEUM AND NATURAL GAS INDUSTRIES
    BS ISO 3977-7:2002 Gas turbines. Procurement Technical information
    ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
    DIN EN ISO 3977-5:2003-05 GAS TURBINES - PROCUREMENT - PART 5: APPLICATIONS FOR PETROLEUM AND NATURAL GAS INDUSTRIES

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
    DIN 2547:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 100
    ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
    ISO 15649:2001 Petroleum and natural gas industries — Piping
    BS 4807:1991 Recommendation for centralized lubrication systems
    ISO 3977-2:1997 Gas turbines — Procurement — Part 2: Standard reference conditions and ratings
    ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
    API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    ASME B31.1 : 2016 POWER PIPING
    ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
    ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
    ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
    ISO 3977-7:2002 Gas turbines Procurement Part 7: Technical information
    ISO 10816-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    ISO 11086:1996 Gas turbines — Vocabulary
    ISO 7919-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    ISO 10814:1996 Mechanical vibration Susceptibility and sensitivity of machines to unbalance
    NFE 29 204 : 2008 INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS
    API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
    ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
    ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
    DIN 2551:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 400
    ISO 3977-9:1999 Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
    ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
    NFE 29 600 : 1987 INDUSTRIAL PIPEWORK - STEEL FITTINGS AND PLUGS - SOCKET WELDING FITTINGS
    ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
    ISO 3977-5:2001 Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries
    DIN 2545:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 40
    DIN 2550:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 320
    DIN 24425:1991-07 (Draft) OIL (SUPPLY) SYSTEMS - DESCRIPTION, SELECTION, REQUIREMENTS CLASSES
    NFE 29 203 : 1989 INDUSTRIAL PIPEWORK - CARBON, ALLOY AND AUSTENITIC STAINLESS STEEL FLANGES AND FLANGED FITTINGS - TERMINOLOGY - DIMENSIONS
    ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
    ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
    ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
    ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
    ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
    ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
    BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    DIN 2543:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 16
    BS EN 288-3:1992 Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
    ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
    DIN 2546:1969-11 CAST STEEL FLANGES - NOMINAL PRESSURE 64
    DIN 2549:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 250
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems
    ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
    ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
    DIN 2548:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 160
    ISO 1940-2:1997 Mechanical vibration Balance quality requirements of rigid rotors Part 2: Balance errors
    BS 4504-3.3:1989 Circular flanges for pipes, valves and fittings (PN designated) Specification for copper alloy and composite flanges
    ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
    AGMA 420 : LATEST PRACTICE FOR ENCLOSED SPEED REDUCERS OR INCREASERS USING SPUR, HELICAL, HERRINGBONE AND SPIRAL BEVEL GEARS
    ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
    DIN 2544:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 25
    ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective