|
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
|
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
|
Information technology equipment - Safety - Part 1: General requirements |
|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
|
IEC 60335-2-82:2017
|
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines |
|
IEC 60038:2009
|
IEC standard voltages |
|
IEC 61558-2-1:2007
|
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
|
EN 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
|
IEC 60107-1:1997
|
Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies |
|
EN 60998-2-2:2004
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
|
EN 61558-2-4:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
|
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
|
EN 60825-1:2014/AC:2017-06
|
SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
|
IEC 60598-2-17:2017
|
Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor) |
|
EN 60085:2008
|
Electrical insulation - Thermal evaluation and designation |
|
EN 62087:2012
|
Methods of measurement for the power consumption of audio, video and related equipment |
|
IEC TS 62441:2011
|
Safeguards againts accidentally caused candle flame ignition for audio/video, communication and information technology equipment |
|
IEC 61558-2-4:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
|
IEC 61293:1994
|
Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
|
EN 61558-1:2005/A1:2009
|
SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
EN 60169-25:1993
|
Radio-frequency connectors - Part 25: Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) |
|
EN 60950-1:2006/A2:2013
|
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
|
IEC 62151:2000
|
Safety of equipment electrically connected to a telecommunication network |
|
IEC 61558-2-16:2009+AMD1:2013 CSV
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
|
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements |
|
CLC/TS 62441:2012
|
Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment |
|
EN 60691:2016
|
Thermal-links - Requirements and application guide |
|
IEC 60885-1:1987
|
Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V |
|
IEC 60384-1:2016
|
Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
|
EN 61558-2-17:1997
|
Safety of power transformers, power supply units and similar - Part 2-17: Particular requirements for transformers for switch mode power supplies |
|
IEC 60068-2-31:2008
|
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
|
IEC 60851-6:2012
|
Winding wires - Test methods - Part 6: Thermal properties |
|
IEC 60851-5:2008+AMD1:2011 CSV
|
Winding wires - Test methods - Part 5: Electrical properties |
|
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
|
EN 60747-5-5:2011/A1:2015
|
SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013) |
|
IEC 60999-1:1999
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
|
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
|
IEC 61558-2-17:1997
|
Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies |
|
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
|
EN 60598-2-9:1989/A1:1994
|
Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-professional) |
|
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
|
HD 568 : 200S1
|
METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF SOLID INSULATING MATERIALS |
|
EN 50332-1:2013
|
Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
|
IEC 60998-2-2:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
|
HD 27 : 200S1
|
COLOURS OF THE CORES OF FLEXIBLE CABLES AND CORDS |
|
EN 61558-2-1:2007
|
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
|
EN 61040:1992
|
Power and energy measuring detectors, instruments and equipment for laser radiation |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
|
IEC 60691:2015
|
Thermal-links - Requirements and application guide |
|
IEC GUIDE 104:2010
|
The preparation of safety publications and the use of basic safety publications and group safety publications |
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
|
IEC 61051-2:1991
|
Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors |
|
EN 61032:1998
|
Protection of persons and equipment by enclosures - Probes for verification |
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
EN 50332-2:2013
|
Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
|
IEC 60851-3:2009+AMD1:2013 CSV
|
Winding wires - Test methods - Part 3: Mechanical properties |
|
EN 60169-21:1997
|
Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impendance 50 ohms (types SC-A and SC-B) |
|
HD 483.1 : 200S2
|
SOUND SYSTEM EQUIPMENT - GENERAL |
|
EN 60130-9:2011
|
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
|
IEC 60268-1:1985
|
Sound system equipment. Part 1: General |
|
IEC 62471:2006
|
Photobiological safety of lamps and lamp systems |
|
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
|
EN 60169-24:1993
|
Radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) |
|
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
|
EN 61965:2003
|
Mechanical safety of cathode ray tubes |
|
EN 60598-2-17:1989/A2:1991
|
LUMINAIRES FOR STAGE LIGHTING, TELEVISION, FILM AND PHOTOGRAPHIC STUDIOS (OUTDOOR AND INDOOR) |
|
ISO 261:1998
|
ISO general purpose metric screw threads General plan |
|
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
|
EN 60086-4:2015
|
Primary batteries - Part 4: Safety of lithium batteries |
|
EN 50395 : 2005 AMD 1 2011
|
ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
|
EN 60335-2-82:2003/A1:2008
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
|
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
|
EN 61058-1:2002/A2:2008
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
IEC 61965:2003
|
Mechanical safety of cathode ray tubes |
|
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
|
EN 60999-1:2000
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
|
EN 61558-2-6:2009
|
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
|
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
|
IEC 60747-5-5:2007+AMD1:2013 CSV
|
Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers |
|
IEC 62133 : 2.0EN+(REDLINE+VERSION)
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS |
|
EN 60384-1:2016
|
Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
|
EN 60335-2-56:2003/A2:2014
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-56: PARTICULAR REQUIREMENTS FOR PROJECTORS AND SIMILAR APPLIANCES |
|
IEC 60086-4:2014
|
Primary batteries - Part 4: Safety of lithium batteries |
|
EN 61293:1994
|
Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols |
|
EN 60107-1:1997
|
Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies |
|
IEC 60173:1964
|
Colours of the cores of flexible cables and cords |
|
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
|
IEC 61032:1997
|
Protection of persons and equipment by enclosures - Probes for verification |
|
IEC 61260:1995
|
Electroacoustics - Octave-band and fractional-octave-band filters |
|
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
|
EN 62471:2008
|
Photobiological safety of lamps and lamp systems |
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
EN ISO 306:2013
|
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
|
EN 60664-3:2017
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
|
EN 61260:1995/A1:2001
|
ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
|
EN 50396 : 2005 AMD 1 2011
|
NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
|
EN 60130-17:1999
|
Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
|
EN 50514:2014
|
Audio, video and information technology equipment - Routine electrical safety testing in production |
|
IEC 60335-2-56:2002+AMD1:2008+AMD2:2014 CSV
|
Household and similar electrical appliances - Safety - Part 2-56:Particular requirements for projectors and similar appliances |
|
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current |
|
EN 60169-23:1993
|
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) |
|
EN 60068-2-31:2008
|
ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
|
IEC 61040:1990
|
Power and energy measuring detectors, instruments and equipment for laser radiation |
|
EN 60990:2016
|
Methods of measurement of touch current and protective conductor current |