AS/NZS 3007:2013
Current
The latest, up-to-date edition.
Electrical equipment in mines and quarries - Surface installations and associated processing plant
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
24-06-2013
Applies to the design, installation and operation of electrical plant and equipment installed at surface mining and quarrying operations, the surface of underground mines, and associated processing plants.
Committee |
EL-023
|
DocumentType |
Standard
|
ISBN |
978 1 74342 516 9
|
Pages |
112
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
Originated in Australia as AS 3007.1-1982, AS 3007.2-1982, AS 3007.3-1982, AS 3007.4-1985 and AS 3007.5-1987.
Previous editions AS 3007.1-2004, AS 3007.2-2004, AS 3007.3-2004, AS 3007.4-2004 and AS 3007.5-2004.
Jointly revised, amalgamated and redesignated AS/NZS 3007:2013.
AS ISO 14520.14-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-55 extinguishant (ISO 14520-14:2005, MOD) |
AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
AS 62061-2006 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
AS 4024.1101-2006 | Safety of machinery Terminology - Terms and definitions |
AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
AS 7240.2-2004 | Fire detection and alarm systems Control and indicating equipment (ISO 7240-2:2003, MOD) |
AS 60974.6-2006 | Arc welding equipment Limited duty portable arc welding and allied process power sources (IEC 60974-6:2003, MOD) |
AS/NZS 61000.6.2:2006 | Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016) |
AS/NZS 61000.1.1:2000 | Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016) |
AS ISO 14520.11-2009 | Gaseous fire-extinguishing systems - Physical properties and system design HFC 236fa extinguishant (ISO 14520-11:2005, MOD) |
AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS 61508.0-2006 | Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and AS 61508 (Reconfirmed 2015) |
AS 4024.4-1998 | Safeguarding of machinery Installation and commissioning requirements for electro-sensitive systems - Pressure-sensitive devices (Reconfirmed 2016) |
AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
AS/NZS 1747:2003 | Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020) |
AS 7240.10-2007 | Fire detection and alarm systems Point-type flame detectors |
AS 2118.8-1997 | Automatic fire sprinkler systems Minor modifications (Reconfirmed 2013) |
AS 4024.1801-2006 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
AS 4024.1901-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators |
AS 60044.2-2007 | Instrument transformers Inductive voltage transformers (IEC 60044-2:Ed.1.2 (2003) MOD) |
AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
AS 62040.2-2008 | Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements |
AS 2118.10-1995 | Automatic fire sprinkler systems Approval documentation (Reconfirmed 2013) |
AS/NZS 1768:2007 | Lightning protection |
AS 1603.7-1996 | Automatic fire detection and alarm systems Optical beam smoke detectors (Reconfirmed 2016) |
AS/NZS 61000.2.12:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (Reconfirmed 2013) |
AS/NZS 61000.3.4:2007 | Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018) |
AS/NZS 61000.2.2:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013) |
AS/NZS 61000.4.30:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods |
AS/NZS 61000.4.13:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
AS 61508.4-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Definitions and abbreviations (Reconfirmed 2023) |
AS/NZS 61000.3.2:2007 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD) |
AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 4024.1:2006 Series | Safety of machinery Safety of machinery series |
AS 4024.1401-2006 | Safety of machinery Ergonomic principles - Design principles - Terminology and general principles |
AS 4024.2601-2008 | Safety of machinery Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles |
AS 2290.3-1990 | Electrical equipment for coal mines - Maintenance and overhaul - Maintenance of gas detecting and monitoring equipment |
AS 7240.7-2004 | Fire detection and alarm systems Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD) (Reconfirmed 2016) |
AS/NZS 61000.4.27:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023) |
AS 1603.13-1998 | Automatic fire detection and alarm systems - Duct sampling units |
AS 4024.3001-2009 | Safety of machinery Materials forming and shearing - Mechanical power presses |
AS 4024.3002-2009 | Safety of machinery Materials forming and shearing - Hydraulic power presses |
AS 4024.1803-2006 | Safety of machinery Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body |
AS 4024.3101-2008 | Safety of machinery Materials cutting - Milling machines (including boring machines) - Safety requirements (Reconfirmed 2018) |
AS 4024.1604-2006 | Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design |
AS/NZS 3001:2008 | Electrical installations - Transportable structures and vehicles including their site supplies |
AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
AS 1603.15-2002 | Automatic fire detection and alarm systems - Remote indicators |
AS IEC 61511.3-2004 | Functional safety - Safety instrumented systems for the process industry sector - Guidance for the determination of the required safety integrity levels (Reconfirmed 2015) |
AS ISO 14520.15-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-541 extinguishant (ISO 14520-15:2005, MOD) |
AS 7240.11-2008 | Fire detection and alarm systems Manual call points (ISO 7240-11:2005, MOD) |
AS 1603.3-1996 | Automatic fire detection and alarm systems - Heat alarms |
AS 61508.5-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Examples of methods for the determination of safety integrity levels (Reconfirmed 2023) |
AS 7240.8-2007 | Fire detection and alarm systems Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor |
AS 1603.2-1997 | Automatic fire detection and alarm systems Point type smoke detectors (Reconfirmed 2016) |
AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
AS 7240.5-2004 | Fire detection and alarm systems Point type heat detectors (ISO 7240-5:2003, MOD) (Reconfirmed 2016) |
AS 4024.1201-2006 | Safety of machinery - General principles - Basic terminology and methodology |
AS 7240.1-2007 | Fire detection and alarm systems - General and definitions |
AS 2118.3-2010 | Automatic fire sprinkler systems Deluge systems |
AS 1674.2-2007 | Safety in welding and allied processes Electrical (Reconfirmed 2018) |
AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
AS 4024.1902-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays |
AS 2118.4-2012 | Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height |
AS 4024.1301-2006 | Safety of machinery Risk assessment - Principles of risk assessment |
AS/NZS 61000.2.5:1999 | Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016) |
AS 1670.4-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Sound systems and intercom systems for emergency purposes |
AS/NZS 2802:2000 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020) |
AS 4024.1501-2006 | Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
AS 4024.1907-2006 | Safety of machinery Displays, controls, actuators and signals - System of auditory and visual danger and information signals |
AS/NZS 61000.4.16:2002 | |
AS/NZS 61000.4.11:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016) |
AS 1603.11-2010 | Automatic fire detection and alarm systems Visual warning devices |
AS 4024.1302-2006 | Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 4024.1202-2006 | Safety of machinery General principles - Technical principles |
AS 1603.16-2002 | Automatic fire detection and alarm systems - In situ testers |
AS 2118.9-1995 | Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013) |
AS/NZS 4240.3:2013 | Remote control systems for mining equipment Operation and maintenance for underground coal mining |
AS 4024.1704-2006 | Safety of machinery Human body measurements - Anthropometric data |
AS ISO 14520.10-2009 | Gaseous fire-extinguishing systems - Physical properties and system design HFC 23 extinguishant (ISO 14520-10:2005, MOD) |
AS ISO 14520.1-2009 | Gaseous fire-extinguishing systems - Physical properties and system design General requirements (ISO 14520-1:2006, MOD) |
AS 7240.12-2007 | Fire detection and alarm systems Line type smoke detectors using a transmitted optical beam |
AS 61508.7-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Overview of techniques and measures (Reconfirmed 2023) |
AS 4024.1603-2006 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014) |
AS 7240.13-2006 | Fire detection and alarm systems Compatibility assessment of system components (Reconfirmed 2016) |
AS/NZS 61000.6.3:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments |
AS 62040.1.2-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations |
AS 1670.6-1997 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Smoke alarms |
AS 7240.4-2004 | Fire detection and alarm systems Power supply equipment (ISO 7240-4:2003, MOD) |
AS 2293.1-2005 | Emergency escape lighting and exit signs for buildings System design, installation and operation |
AS/NZS 5603:2009 | Stand-alone inverters - Performance requirements (Reconfirmed 2017) |
AS 7240.15-2004 | Fire detection and alarm systems Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor (ISO 7240-15:2004, MOD) (Reconfirmed 2016) |
AS/NZS 1850:2009 | Portable fire extinguishers - Classification, rating and performance testing (Reconfirmed 2021) |
AS 2700-2011 | Colour standards for general purposes (Reconfirmed 2022) |
AS/NZS 61000.3.11:2002 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection (Reconfirmed 2013) |
AS 61508.1-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems General requirements (Reconfirmed 2023) |
AS 7240.6-2006 | Fire detection and alarm systems Carbon monoxide fire detectors using electro-chemical cells (Reconfirmed 2016) |
AS 60076.1-2005 | Power transformers General (IEC 60076-1, Ed. 2.1 (2000) MOD) |
AS/NZS 3010:2005 | Electrical installations - Generating sets |
AS 4024.2801-2008 | Safety of machinery Safety distances and safety gaps - Positioning of protective equipment with respect to the approach speed of parts of the human body |
AS 61508.2-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Requirements for electrical/electronic/programmable electronic safety-related systems (Reconfirmed 2023) |
AS 4024.1502-2006 | Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014) |
AS/NZS 61000.4.7:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023) |
AS 2118.1-2006 | Automatic fire sprinkler systems General systems |
AS 60044.1-2007 | Instrument transformers Current transformers (IEC 60044-1 Ed.1.2 (2003) MOD) (Reconfirmed 2016) |
AS/NZS 4763:2011 | Safety of portable inverters (Reconfirmed 2024) |
AS 7240.22-2008 | Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD) |
AS 1824.2-1985 | Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
AS 4024.1905-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking |
AS 61508.3-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Software requirements (Reconfirmed 2023) |
AS/NZS 61000.6.1:2006 | Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016) |
AS 61508.6-2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 (Reconfirmed 2023) |
AS 4024.3301-2009 | Safety of machinery Robots for industrial environments - Safety requirements |
AS 4024.1703-2006 | Safety of machinery Principles for determining the dimensions required for access openings |
AS 4024.1904-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
AS 4024.1802-2006 | Safety of machinery Safety distances and safety gaps - Safety distances to prevent danger zones being reached by the lower limbs |
AS/NZS 61000.2.4:2009 | Electromagnetic compatibility (EMC) Environment-Compatibility levels in industrial plants for low-frequency conducted disturbances (Reconfirmed 2020) |
AS 1603.8-1996 | Automatic fire detection and alarm systems Multi-point aspirated smoke detectors (Reconfirmed 2016) |
AS/NZS 61000.3.5:1998 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
AS 1670.1-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire |
AS 1603.17-2011 | Automatic fire detection and alarm systems Warning equipment for people with hearing impairment |
AS/NZS 3100:2009 | |
AS 61800.3-2005 | Adjustable speed electrical power drive systems EMC requirements and specific test methods (Reconfirmed 2016) |
AS/NZS 61000.3.12:2006 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase |
AS/NZS 1020:1995 | The control of undesirable static electricity |
AS IEC 61511.1-2004 | Functional safety - Safety instrumented systems for the process industry sector - Framework, definitions, systems, hardware and software requirements |
AS 2444-2001 | Portable fire extinguishers and fire blankets - Selection and location (Reconfirmed 2021) |
AS ISO 14520.13-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-100 extinguishant (ISO 14520-13:2005, MOD) |
AS/NZS 4836:2011 | Safe working on or near low-voltage electrical installations and equipment |
AS/NZS 4240.1:2009 | Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021) |
AS 2665-2001 | Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016) |
AS ISO 14520.12-2009 | Gaseous fire-extinguishing systems - Physical properties and system design IG-01 extinguishant (ISO 14520-12:2005, MOD) |
AS 1603.14-2001 | Automatic fire detection and alarm systems - Point type carbon monoxide (CO) fire detectors |
AS 1318-1985 | Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) |
AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
AS 4024.1701-2006 | Safety of machinery Human body measurements - Basic human body measurements for technological design |
AS/NZS 61000.4.5:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
AS 4024.5-1998 | Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Pressure-sensitive devices |
AS 61508 Supp1-2012 | Functional safety of electrical/electronic/programmable electronic safety-related systems, Supplement 1: Commented version (Supplement to AS 61508 series) (Reconfirmed 2023) |
AS/NZS 60079.10.2:2011 | Explosive atmospheres Classification of areas - Combustible dust atmospheres |
AS/NZS 3008.1.1:2009 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS 4024.1602-2006 | Safety of machinery Interlocking devices associated with guards - Principles for design and selection |
AS 60974.1-2006 | Arc welding equipment Welding power sources (IEC 60974-1:2000, MOD) |
AS 1603.1-1997 | Automatic fire detection and alarm systems Heat detectors (Reconfirmed 2016) |
AS 4024.1702-2006 | Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery |
AS 1603.5-1996 | Automatic fire detection and alarm systems Manual call points (Reconfirmed 2016) |
AS/NZS 61000.4.8:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test (Reconfirmed 2023) |
AS 62040.1.1-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
AS 60076.11-2006 | Power transformers Dry-type transformers |
AS 7240.21-2006 | Fire detection and alarm systems - Routing equipment |
AS 1755-2000 | Conveyors - Safety requirements |
AS/NZS 61000.6.4:2012 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments |
AS 60044.5-2004 | Instrument transformers Capacitor voltage transformers |
AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
AS/NZS 61000.2.3:1999 | Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016) |
AS 4024.3-1998 | Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Optoelectronic devices |
AS IEC 61511.2-2004 | Functional safety - Safety instrumented systems for the process industry sector - Guidelines for the application of AS IEC 61511-1 |
AS 2118.6-2012 | Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings |
AS 7240.20-2012 | Fire detection and alarm systems Aspirating smoke detectors (Reconfirmed 2023) |
AS/NZS 61000.4.15:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Functional and design specifications |
AS 60044.3-2004 | Instrument transformers Combined transformers |
AS 4024.1906-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators |
AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
AS 2118.1-1999 | Automatic fire sprinkler systems General requirements |
AS/NZS 4240.2:2009 | Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021) |
AS/NZS 61000.4.1:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series |
AS/NZS 61000.4.34:2012 | Electromagnetic compatibility (EMC) Testing and measurements techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (Reconfirmed 2023) |
AS 4024.1601-2006 | Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
AS 1670.3-2004 | Fire detection, warning, control and intercom systems - System design, installation and commissioning - Fire alarm monitoring |
AS 4024.1903-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators |
AS 1851-2012 | Routine service of fire protection systems and equipment |
AS 60204.11-2006 | Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) |
AS 2467-2008 | Maintenance of electrical switchgear |
AS/NZS 61000.3.3:2012 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
AS/NZS 61000.4.14:2012 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023) |
AS/NZS 4871.2:2010 | Electrical equipment for mines and quarries Distribution, control and auxiliary equipment |
AS 4436-1996 | Guide for the selection of insulators in respect of polluted conditions |
AS/NZS 1668.1:1998 | The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings |
AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
AS/NZS 4853:2012 | Electrical hazards on metallic pipelines |
SA/SNZ HB 146:2018 | Management of electrical cable in mines and quarries |
AS/NZS 3010:2017 | Electrical installations - Generating sets |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.