ASTM D 1129 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Water
Available format(s)
Hardcopy , PDF
Superseded date
10-08-2020
Superseded by
Language(s)
English
Published date
25-04-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 19
|
| DocumentType |
Reference Material
|
| Pages |
75
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 6974 : 2016 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM E 1326 : 2015 : REV A | Standard Guide for Evaluating Non-culture Microbiological Tests |
| ASTM D 3864 : 2012 | Standard Guide for On-Line Monitoring Systems for Water Analysis |
| ASTM D 4994 : 2019 | Standard Practice for Recovery of Viruses from Wastewater Sludges |
| ASTM D 6767 : 2016 | Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
| ASTM D 8193 : 2018 | Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy |
| ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 7285 : 2006 : R2017 | Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems |
| ASTM D 5612 : 1994 : R2018 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
| ASTM D 8027 : 2017 | Standard Practice for Concentration of Select Radionuclides Using MnO<inf>2</inf > for Measurement Purposes |
| ASTM D 8001 : 2016 : EDT 1 | Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography |
| ASTM D 934 : 2013 | Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022) |
| ASTM D 7126 : 2015 | Standard Test Method for On-Line Colorimetric Measurement of Silica |
| ASTM D 7677 : 2016 | Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water |
| ASTM D 7784 : 2012 | Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry |
| ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
| ASTM D 5256 : 2014 | Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits |
| ASTM D 7575 : 2011 : R2017 | Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination |
| ASTM D 3986 : 2017 | Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy |
| ASTM E 2914/E2914M : 2019 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
| ASTM D 1291 : 2017 | Standard Practice for Estimation of Chlorine Demand of Water |
| ASTM D 1179 : 2016 | Standard Test Methods for Fluoride Ion in Water |
| ASTM D 3590 : 2017 | Standard Test Methods for Total Kjeldahl Nitrogen in Water |
| ASTM D 5284 : 2009 : R2017 | Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
| ASTM D 6502 : 2010 : R2015 | Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF) |
| ASTM D 4012 : 2015 | Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |
| ASTM E 2143 : 2001 : R2013 | Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons |
| ASTM D 4148 : 1982 : R2012 | Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method (Withdrawn 2020) |
| ASTM D 4763 : 2006 : R2012 | Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy |
| ASTM D 3325 : 1990 : R2013 | Standard Practice for Preservation of Waterborne Oil Samples |
| ASTM D 7730 : 2017 | Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 1783 : 2001 : R2012 : EDT 1 | Standard Test Methods for Phenolic Compounds in Water |
| ASTM D 5464 : 2016 | Standard Test Method for pH Measurement of Water of Low Conductivity |
| ASTM D 1126 : 2017 | Standard Test Method for Hardness in Water |
| ASTM D 6696 : 2016 | Standard Guide for Understanding Cyanide Species |
| ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
| ASTM D 7725 : 2017 | Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU) |
| ASTM D 8028 : 2017 | Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID) |
| ASTM F 1094 : 1987 : R2012 | Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
| ASTM D 4149 : 1982 : R2012 | Standard Classification for Sampling Phytoplankton in Surface Waters (Withdrawn 2020) |
| ASTM D 7283 : 2017 | Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
| ASTM D 5465 : 2016 | Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods |
| ASTM D 3694 : 1996 : R2017 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 5391 : 2014 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023) |
| ASTM D 7572 : 2015 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
| ASTM D 6071 : 2014 | Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy |
| ASTM E 2771 : 2011 : R2019 | Standard Terminology for Homeland Security Applications |
| ASTM D 5811 : 2008 : R2013 | Standard Test Method for Strontium-90 in Water |
| ASTM D 8026 : 2016 | Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
| ASTM D 4472 : 2008 : R2014 | Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems (Withdrawn 2023) |
| ASTM D 5086 : 2001 : R2013 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM D 3328 : 2006 : R2013 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
| ASTM D 513 : 2016 | Standard Test Methods for Total and Dissolved Carbon Dioxide in Water |
| ASTM D 887 : 2013 | Standard Practices for Sampling Water-Formed Deposits |
| ASTM D 7678 : 2017 | Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy |
| ASTM D 4453 : 2017 | Standard Practice for Handling of High Purity Water Samples |
| ASTM D 7937 : 2015 | Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water |
| ASTM D 3974 : 2009 : R2015 | Standard Practices for Extraction of Trace Elements from Sediments |
| ASTM D 6081 : 2019 | Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation |
| ASTM E 1023 : 1984 : R2014 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
| ASTM D 4790 : 2014 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 516 : 2016 | Standard Test Method for Sulfate Ion in Water |
| ASTM E 1645 : 2016 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM D 5411 : 2010 : R2015 | Standard Practice for Calculation of Average Energy Per Disintegration (¯E) for a Mixture of Radionuclides in Reactor Coolant |
| ASTM D 6239 : 2009 : R2015 | Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry (Withdrawn 2024) |
| ASTM D 858 : 2017 | Standard Test Methods for Manganese in Water |
| ASTM D 4200 : 1982 : R2011 | Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters |
| ASTM E 2613 : 2014 | Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults |
| ASTM D 5233 : 1992 : R2017 | Standard Test Method for Single Batch Extraction Method for Wastes |
| ASTM E 1611 : 2000 : R2013 | Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids |
| ASTM D 8083 : 2016 | Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection |
| ASTM E 1391 : 2003 : R2014 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
| ASTM D 5929 : 2018 | Standard Test Method for Determining Biodegradability of Materials Exposed to Source-Separated Organic Municipal Solid Waste Mesophilic Composting Conditions by Respirometry |
| ASTM D 4130 : 2015 | Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines (Withdrawn 2024) |
| ASTM D 5388 : 1993 : R2013 | Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method |
| ASTM D 7362 : 2014 | Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition (Withdrawn 2023) |
| ASTM D 5847 : 2002 : R2012 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 6238 : 1998 : R2017 | Standard Test Method for Total Oxygen Demand in Water |
| ASTM D 1971 : 2016 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D 5640 : 1995 : R2014 | Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water (Withdrawn 2023) |
| ASTM D 1252 : 2006 : R2012 : EDT 1 | Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
| ASTM D 3372 : 2017 | Standard Test Method for Molybdenum in Water |
| ASTM D 7366 : 2008 : R2013 | Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods |
| ASTM D 4131 : 2019 | Standard Practice for Sampling Fish with Rotenone |
| ASTM D 511 : 2014 | Standard Test Methods for Calcium and Magnesium In Water |
| ASTM D 3483 : 2014 | Standard Test Methods for Accumulated Deposition in a Steam Generator Tube |
| ASTM D 3559 : 2015 | Standard Test Methods for Lead in Water (Withdrawn 2024) |
| ASTM D 5412 : 1993 : R2017 : EDT 1 | Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
| ASTM F 1115 : 2016 | Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers |
| ASTM D 7574 : 2016 | Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 2035 : 2019 | Standard Practice for Coagulation-Flocculation Jar Test of Water |
| ASTM D 5541 : 1994 : R2014 | Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow (Withdrawn 2023) |
| ASTM D 7600 : 2016 : R2017 | Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 3923 : 2008 : R2014 | Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices |
| ASTM D 4266 : 2017 | Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
| ASTM D 3558 : 2015 | Standard Test Methods for Cobalt in Water |
| ASTM D 5542 : 2016 | Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography |
| ASTM E 2800 : 2011 : R2017 | Standard Practice for Characterization of <emph type="ital">Bacillus</emph> Spore Suspensions for Reference Materials |
| ASTM D 6888 : 2016 | Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 2908 : 1991 : R2017 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM D 3087 : 2017 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 1429 : 2013 | Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022) |
| ASTM D 4192 : 2015 | Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry (Withdrawn 2024) |
| ASTM E 2197 : 2017 : EDT 1 | Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals |
| ASTM D 3082 : 2015 | Standard Test Method for Boron in Water (Withdrawn 2024) |
| ASTM D 5389 : 1993 : R2013 | Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems |
| ASTM C 998 : 2017 | Standard Practice for Sampling Surface Soil for Radionuclides |
| ASTM D 5674 : 1995 : R2014 | Standard Guide for Operation of a Gaging Station |
| ASTM D 4922 : 2009 : R2016 : EDT 1 | Standard Test Method for Determination of Radioactive Iron in Water |
| ASTM D 5129 : 1995 : R2014 : EDT 1 | Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions (Withdrawn 2023) |
| ASTM D 1245 : 2017 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
| ASTM D 4778 : 2015 | Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024) |
| ASTM D 3697 : 2017 | Standard Test Method for Antimony in Water |
| ASTM D 7464 : 2014 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 3861 : 1991 : R2011 | Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters (Withdrawn 2020) |
| ASTM D 5072 : 2009 : R2016 | Standard Test Method for Radon in Drinking Water |
| ASTM D 5543 : 2015 | Standard Test Method for Low-Level Dissolved Oxygen in Water |
| ASTM D 7980 : 2015 | Standard Guide for Ion-Chromatographic Analysis of Anions in Grab Samples of Ultrapure Water (UPW) in the Semiconductor Industry |
| ASTM D 3373 : 2017 | Standard Test Method for Vanadium in Water |
| ASTM D 5788 : 1995 : R2017 | Standard Guide for Spiking Organics into Aqueous Samples |
| ASTM D 5092/D5092M : 2016 | Standard Practice for Design and Installation of Groundwater Monitoring Wells |
| ASTM D 5242 : 1992 : R2013 | Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs |
| ASTM D 2688 : 2015 : EDT 1 | Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method) |
| ASTM D 3326 : 2007 : R2017 | Standard Practice for Preparation of Samples for Identification of Waterborne Oils |
| ASTM D 3695 : 1995 : R2013 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography |
| ASTM D 6104 : 1997 : R2017 : EDT 1 | Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off |
| ASTM D 4196 : 2005 : R2011 | Standard Test Method for Confirming the Sterility of Membrane Filters |
| ASTM D 7535 : 2009 : R2015 | Standard Test Method for Lead-210 in Water (Withdrawn 2024) |
| ASTM D 7687 : 2017 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
| ASTM D 6302 : 1998 : R2017 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 7783 : 2013 | Standard Practice for Within-laboratory Quantitation Estimation (WQE) |
| ASTM D 3084 : 2005 : R2012 | Standard Practice for Alpha-Particle Spectrometry of Water |
| ASTM D 1068 : 2015 | Standard Test Methods for Iron in Water (Withdrawn 2024) |
| ASTM D 5245 : 2019 | Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses |
| ASTM D 859 : 2016 | Standard Test Method for Silica in Water |
| ASTM D 4458 : 2015 | Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines |
| ASTM D 5681 : 2018 | Standard Terminology for Waste and Waste Management |
| ASTM D 7599 : 2016 : R2017 | Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 1886 : 2014 | Standard Test Methods for Nickel in Water |
| ASTM D 6161 : 2019 | Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes |
| ASTM D 5246 : 2015 | Standard Test Method for Isolation and Enumeration of <emph type="ital">Pseudomonas aeruginosa </emph> from Water |
| ASTM D 7513 : 2017 | Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges |
| ASTM D 6731 : 2018 | Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
| ASTM D 6520 : 2018 | Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds |
| ASTM D 5243 : 1992 : R2013 | Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts |
| ASTM D 5175 : 1991 : R2017 : EDT 1 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
| ASTM D 6326 : 2008 : R2014 | Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers |
| ASTM D 6807 : 2017 | Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from<brk/>2 to 100 μS/cm |
| ASTM D 3865 : 2009 : R2015 | Standard Test Method for Plutonium in Water (Withdrawn 2024) |
| ASTM D 4412 : 2015 | Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits |
| ASTM D 7511 : 2012 : R2017 : EDT 1 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 7601 : 2019 | Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation |
| ASTM D 3871 : 1984 : R2017 | Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling |
| ASTM D 5012 : 2001 : R2013 | Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 5997 : 2015 | Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 5085 : 2002 : R2013 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM D 4638 : 2016 | Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis |
| ASTM D 5128 : 2014 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM D 4993 : 2008 : R2014 | Standard Practice for Calculation and Adjustment of Silica (SiO<inf>2</inf>) Scaling for Reverse Osmosis (Withdrawn 2023) |
| ASTM D 5904 : 2002 : R2017 | Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM E 1053 : 2011 | Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces |
| ASTM D 7237 : 2018 | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 4456 : 2017 | Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM D 6908 : 2006 : R2017 | Standard Practice for Integrity Testing of Water Filtration Membrane Systems |
| ASTM D 3645 : 2015 | Standard Test Methods for Beryllium in Water |
| ASTM D 4548 : 2011 | Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins |
| ASTM D 7645 : 2016 | Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 7598 : 2016 : R2017 | Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 3454 : 2018 | Standard Test Method for Radium-226 in Water |
| ASTM D 3561 : 2016 | Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry |
| ASTM D 5257 : 2017 | Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography |
| ASTM D 3860 : 1998 : R2014 | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique |
| ASTM D 6036 : 1996 : R2014 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023) |
| ASTM E 1525 : 2002 : R2014 | Standard Guide for Designing Biological Tests with Sediments |
| ASTM D 7938 : 2015 | Standard Practice for Sampling of C-14 in Gaseous Effluents |
| ASTM D 3977 : 1997 : R2013 : EDT 1 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| ASTM D 5614 : 1994 : R2014 | Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs (Withdrawn 2023) |
| ASTM D 7315 : 2017 | Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode |
| ASTM D 5392 : 2019 | Standard Test Method for Isolation and Enumeration of <emph type="bdit">Escherichia coli</emph> in Water by the Two-Step Membrane Filter Procedure |
| ASTM D 5765 : 2016 | Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating |
| ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 4823 : 1995 : R2014 | Standard Guide for Core Sampling Submerged, Unconsolidated Sediments |
| ASTM D 6317 : 2015 | Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM C 1751 : 2011 | Standard Guide for Sampling Radioactive Tank Waste |
| ASTM F 3139 : 2015 | Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 6530 : 2000 : R2013 | Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA) |
| ASTM D 3856 : 2011 : R2015 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) |
| ASTM D 6586 : 2003 : R2014 | Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests |
| ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
| ASTM D 8084 : 2017 | Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water |
| ASTM D 1498 : 2014 | Standard Test Method for Oxidation-Reduction Potential of Water |
| ASTM D 4517 : 2015 | Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy |
| ASTM D 3869 : 2015 | Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines |
| ASTM D 6503 : 2019 | Standard Test Method for Enterococci in Water Using Enterolert |
| ASTM C 242 : 2018 | Standard Terminology of Ceramic Whitewares and Related Products |
| ASTM D 7979 : 2017 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 8024 : 2016 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
| ASTM E 2967 : 2015 | Standard Test Method for Assessing the Ability of Pre-wetted Towelettes to Remove and Transfer Bacterial Contamination on Hard, Non-Porous Environmental Surfaces Using the Wiperator (Withdrawn 2024) |
| ASTM D 4282 : 2015 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 4874 : 1995 : R2014 | Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021) |
| ASTM D 5174 : 2007 : R2013 | Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry (Withdrawn 2022) |
| ASTM D 4658 : 2015 | Standard Test Method for Sulfide Ion in Water (Withdrawn 2024) |
| ASTM D 4692 : 2001 : R2017 | Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO<inf >4</inf>, SrSO<inf>4</inf>, and BaSO<inf>4</inf>) for Reverse Osmosis and Nanofiltration |
| ASTM D 4193 : 2008 : R2013 : EDT 1 | Standard Test Method for Thiocyanate in Water |
| ASTM D 6994 : 2015 | Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection (Withdrawn 2024) |
| ASTM D 5316 : 1998 : R2017 | Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography |
| ASTM D 7365 : 2009 : REV A : R2015 | Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide |
| ASTM D 3975 : 1993 : R2014 | Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
| ASTM E 1022 : 1994 : R2013 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks (Withdrawn 2022) |
| ASTM D 7282 : 2014 | Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements |
| ASTM D 3867 : 2016 | Standard Test Methods for Nitrite-Nitrate in Water |
| ASTM D 2791 : 2013 | Standard Test Method for On-line Determination of Sodium in Water |
| ASTM D 3868 : 2015 | Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines |
| ASTM D 2036 : 2009 : R2015 | Standard Test Methods for Cyanides in Water |
| ASTM D 4785 : 2008 : R2013 : EDT 1 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water |
| ASTM E 2122 : 2002 : R2013 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves (Withdrawn 2022) |
| ASTM D 8243 : 2019 | Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method (Withdrawn 2024) |
| ASTM D 7781 : 2014 | Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase (Withdrawn 2023) |
| ASTM D 4129 : 2005 : R2013 | Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection |
| ASTM D 3919 : 2015 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry (Withdrawn 2024) |
| ASTM D 6569 : 2014 | Standard Test Method for On-Line Measurement of pH (Withdrawn 2023) |
| ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
| ASTM D 6157 : 1997 : R2017 : EDT 1 | Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release |
| ASTM D 5241 : 1992 : R2017 | Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
| ASTM E 1218 : 2004 : R2012 | Standard Guide for Conducting Static Toxicity Tests with Microalgae (Withdrawn 2021) |
| ASTM D 3328 : 2006 : R2020 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
| ASTM D 4823 : 1995 : R2019 | Standard Guide for Core Sampling Submerged, Unconsolidated Sediments |
| ASTM D 2330 : 2020 | Standard Test Method for Methylene Blue Active Substances |
| ASTM D 4548 : 2011 : R2019 | Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins |
| ASTM D 2791 : 2019 | Standard Test Method for On-Line Determination of Sodium in Water |
| ASTM D 4196 : 2005 : R2019 | Standard Test Method for Confirming the Sterility of Membrane Filters |
| ASTM D 1976 : 2019 | Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy |
| ASTM D 5243 : 1992 : R2019 | Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts |
| ASTM F 316 : 2003(R2019) | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM D 4516 : 2019 : REV A | Standard Practice for Standardizing Reverse Osmosis Performance Data |
| ASTM D 1783 : 2001 : R2020 | Standard Test Methods for Phenolic Compounds in Water |
| ASTM D 3975 : 1993 : R2019 | Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
| ASTM D 6764 : 2002 : R2019 | Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels |
| ASTM D 3977 : 1997 : R2019 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| ASTM D 7366 : 2008 : R2019 | Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods |
| ASTM D 5387 : 1993 : R2019 | Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments |
| ASTM D 6530 : 2019 | Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA) |
| ASTM D 5074 : 1990 : R2019 : EDT 1 | Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures |
| ASTM D 8070 : 2019 : REV A | Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay |
| ASTM D 4165 : 2006 : R2020 : EDT 1 | Standard Test Method for Cyanogen Chloride in Water |
| ASTM D 1252 : 2006 : R2020 | Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
| ASTM D 4822 : 1988 : R2019 | Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods) |
| ASTM C 1751 : 2020 | Standard Guide for Sampling Radioactive Tank Waste |
| ASTM D 6767 : 2020 | Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
| ASTM D 3325 : 1990 : R2020 | Standard Practice for Preservation of Waterborne Oil Samples |
| ASTM D 4411 : 2003 : R2019 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 7979 : 2019 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 5389 : 1993 : R2019 | Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems |
| ASTM D 5246 : 2019 | Standard Test Method for Isolation and Enumeration of <emph type="ital">Pseudomonas aeruginosa</emph> from Water |
| ASTM D 3862 : 2013 : R2019 | Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
| ASTM D 5739 : 2006 : R2020 | Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry |
| ASTM D 4200 : 1982 : R2019 | Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters |
| ASTM E 2275 : 2019 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
| ASTM E 1053 : 2020 | Standard Practice to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces |
| ASTM D 4198 : 1982 : R2011 | Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth (Withdrawn 2020) |
| ASTM D 3976 : 1992 : R2015 | Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
| ASTM D 5739 : 2006 : R2013 | Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry |
| ASTM D 4327 : 2017 | Standard Test Method for Anions in Water by Suppressed Ion Chromatography |
| ASTM D 3973 : 1985 : R2017 | Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water |
| ASTM D 4190 : 2015 | Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy |
| ASTM D 5627 : 2017 | Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins |
| ASTM D 3649 : 2006 : R2014 | Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water (Withdrawn 2023) |
| ASTM D 6504 : 2011 : R2016 : EDT 1 | Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water |
| ASTM D 2687 : 1995 : R2016 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM E 979 : 2009 : R2015 | Standard Practice for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids |
| ASTM D 7316 : 2014 | Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions (Withdrawn 2023) |
| ASTM D 5996 : 2016 | Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography |
| ASTM D 6568 : 2000 : R2018 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM D 7065 : 2017 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry |
| ASTM D 4194 : 2003 : R2014 | Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices |
| ASTM D 5131 : 1990 : R2014 | Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems (Withdrawn 2023) |
| ASTM D 3978 : 2004 : R2012 | Standard Practice for Algal Growth Potential Testing with <i>Pseudokirchneriella subcapitata</i> |
| ASTM D 1293 : 2018 | Standard Test Methods for pH of Water |
| ASTM D 5905 : 1998 : R2018 | Standard Practice for the Preparation of Substitute Wastewater |
| ASTM D 1253 : 2014 | Standard Test Method for Residual Chlorine in Water |
| ASTM D 4822 : 1988 : R2014 | Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods) |
| ASTM D 1141 : 1998 : R2013 | Standard Practice for the Preparation of Substitute Ocean Water |
| ASTM D 3972 : 2009 : R2015 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry (Withdrawn 2024) |
| ASTM D 5317 : 1998 : R2017 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
| ASTM D 7726 : 2011 : R2016 : EDT 1 | Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water |
| ASTM D 6363 : 1998 : R2013 | Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ASTM D 2460 : 2007 : R2013 | Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022) |
| ASTM D 8002 : 2015 : EDT 1 | Standard Test Method for Modified Fouling Index (MFI-0.45) of Water (Withdrawn 2024) |
| ASTM D 1426 : 2015 | Standard Test Methods for Ammonia Nitrogen In Water |
| ASTM D 2331 : 2008 : R2013 | Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits |
| ASTM D 3858 : 1995 : R2014 | Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method (Withdrawn 2023) |
| ASTM D 5259 : 2019 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM D 1066 : 2018 : EDT 1 | Standard Practice for Sampling Steam |
| ASTM D 3223 : 2017 | Standard Test Method for Total Mercury in Water |
| ASTM D 3862 : 2013 | Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
| ASTM D 1782 : 2017 | Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials |
| ASTM D 933 : 1984 : R2012 | Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits |
| ASTM D 4411 : 2003 : R2014 : EDT 1 | Standard Guide for Sampling Fluvial Sediment in Motion |
| ASTM D 4409 : 1995 : R2014 | Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters (Withdrawn 2023) |
| ASTM D 5673 : 2016 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1125 : 2014 | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| ASTM D 4199 : 1982 : R2011 | Standard Test Methods for Autoclavability of Membrane Filters (Withdrawn 2020) |
| ASTM D 512 : 2012 | Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
| ASTM D 6889 : 2003 : R2017 | Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME) |
| ASTM D 7284 : 2013 : R2017 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 6855 : 2017 | Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode |
| ASTM G 205 : 2016 | Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
| ASTM D 5172 : 1991 : R2015 | Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water (Withdrawn 2024) |
| ASTM D 857 : 2017 | Standard Test Method for Aluminum in Water |
| ASTM D 8025 : 2016 | Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry |
| ASTM D 5130 : 1995 : R2014 | Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method (Withdrawn 2023) |
| ASTM D 7485 : 2016 | Standard Test Method for Determination of Nonylphenol, p-<emph type="bdit">tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
| ASTM D 7742 : 2017 | Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 3651 : 2016 | Standard Test Method for Barium in Brackish Water, Seawater, and Brines |
| ASTM D 7731 : 2017 | Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 3415 : 1998 : R2017 | Standard Practice for Identification of Waterborne Oils |
| ASTM D 4195 : 2008 : R2014 | Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application (Withdrawn 2023) |
| ASTM D 5015 : 2015 | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM D 5540 : 2013 | Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis |
| ASTM D 6145 : 1997 : R2018 | Standard Guide for Monitoring Sediment in Watersheds |
| ASTM D 1688 : 2017 | Standard Test Methods for Copper in Water |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
| ASTM D 5073 : 2002 : R2013 | Standard Practice for Depth Measurement of Surface Water |
| ASTM D 3648 : 2014 | Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
| ASTM D 5176 : 2008 : R2015 | Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection |
| ASTM D 7847 : 2017 | Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
| ASTM D 2580 : 2006 : R2012 | Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021) |
| ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 1941 : 1991 : R2013 | Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume |
| ASTM D 5851 : 1995 : R2015 | Standard Guide for Planning and Implementing a Water Monitoring Program |
| ASTM D 6764 : 2002 : R2013 | Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels |
| ASTM D 4188 : 2017 | Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water |
| ASTM D 5217 : 2017 | Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials |
| ASTM D 5906 : 2002 : R2013 | Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths |
| ASTM D 4793 : 2009 : R2017 | Standard Test Method for Sequential Batch Extraction of Waste with Water |
| ASTM D 2332 : 2013 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM F 17 : 2018 : REV A | Standard Terminology Relating to Primary Barrier Packaging |
| ASTM E 2275 : 2014 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
| ASTM D 4516 : 2019 | Standard Practice for Standardizing Reverse Osmosis Performance Data |
| ASTM D 6919 : 2017 | Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography |
| ASTM D 3739 : 2019 | Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis |
| ASTM E 1706 : 2019 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM D 1385 : 2007 : R2018 : EDT 1 | Standard Test Method for Hydrazine in Water |
| ASTM D 5810 : 1996 : R2015 | Standard Guide for Spiking into Aqueous Samples |
| ASTM E 1688 : 2010 : R2016 | Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
| ASTM D 5413 : 1993 : R2013 | Standard Test Methods for Measurement of Water Levels in Open-Water Bodies |
| ASTM C 1720 : 2017 : EDT 1 | Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses |
| ASTM D 6698 : 2014 | Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water (Withdrawn 2023) |
| ASTM D 5173 : 2015 | Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide |
| ASTM D 5544 : 2016 | Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM D 6529 : 2011 | Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50<span class='unicode'>–</span>1000 <span class='unicode'>μ</span>S/cm (Withdrawn 2020) |
| ASTM D 4489 : 1995 : R2017 | Standard Practices for Sampling of Waterborne Oils |
| ASTM E 2895 : 2019 | Standard Practice for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium |
| ASTM D 5462 : 2013 | Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water |
| ASTM D 6234 : 2013 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 1943 : 2005 : R2012 | Standard Test Method for Alpha Particle Radioactivity of Water |
| ASTM D 4839 : 2003 : R2017 | Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection |
| ASTM D 7939 : 2015 | Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water (Withdrawn 2024) |
| ASTM D 596 : 2001 : R2018 | Standard Guide for Reporting Results of Analysis of Water |
| ASTM D 7782 : 2013 | Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data (Withdrawn 2022) |
| ASTM D 5390 : 1993 : R2013 | Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes |
| ASTM D 4519 : 2016 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
| ASTM D 1292 : 2015 | Standard Test Method for Odor in Water |
| ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM D 3352 : 2015 | Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines (Withdrawn 2024) |
| ASTM D 7168 : 2016 | Standard Test Method for <sup>99</sup>Tc in Water by Solid Phase Extraction Disk |
| ASTM F 316 : 2003 : R2011 | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
| ASTM D 1890 : 2015 : R2017 | Standard Test Method for Beta Particle Radioactivity of Water |
| ASTM D 1246 : 2016 | Standard Test Method for Bromide Ion in Water |
| ASTM D 5387 : 1993 : R2013 | Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments |
| ASTM D 7903 : 2014 | Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges |
| ASTM C 1875 : 2018 | Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) |
| ASTM D 7066 : 2004 : R2017 | Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination |
| ASTM D 4107 : 2008 : R2013 | Standard Test Method for Tritium in Drinking Water |
| ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 6301 : 2013 | Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water |
| ASTM E 2913/E2913M : 2019 | Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples |
| ASTM D 4698 : 1992 : R2013 | Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals |
| ASTM D 4962 : 2018 | Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water |
| ASTM D 3875 : 2015 | Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines |
| ASTM D 5091 : 1995 : R2014 | Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications (Withdrawn 2023) |
| ASTM D 5315 : 2004 : R2017 : EDT 1 | Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization |
| ASTM D 4191 : 2015 | Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry (Withdrawn 2024) |
| ASTM D 932 : 2015 | Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits |
| ASTM D 3863 : 1987 : R2011 | Standard Test Method for Retention Characteristics of 0.40 to 0.45-<span class='unicode'>μ</span>m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality (Withdrawn 2020) |
| ASTM C 1285 : 2014 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM D 5074 : 1990 : R2014 | Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures |
| ASTM D 2187 : 2017 | Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 6318 : 2003 : R2014 | Standard Practice for Calibrating a Fathometer Using a Bar Check Method (Withdrawn 2023) |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 5196 : 2006 : R2018 | Standard Guide for Bio-Applications Grade Water |
| ASTM D 4189 : 2007 : R2014 | Standard Test Method for Silt Density Index (SDI) of Water (Withdrawn 2023) |
| ASTM D 6501 : 2015 | Standard Test Method for Phosphonate in Brines (Withdrawn 2024) |
| ASTM D 5919 : 1996 : R2017 | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations |
| ASTM D 7644 : 2016 | Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 4691 : 2017 | Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry |
| ASTM D 5089 : 1995 : R2014 | Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters (Withdrawn 2023) |
| ASTM D 1067 : 2016 | Standard Test Methods for Acidity or Alkalinity of Water |
| ASTM E 2694 : 2016 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
| ASTM D 4165 : 2006 : R2012 | Standard Test Method for Cyanogen Chloride in Water |
| ASTM D 7597 : 2016 : R2017 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 932 : 2020 | Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.