BS EN 13463-1:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
Hardcopy , PDF
24-01-2020
English
31-01-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Equipment categories and explosion groups
5 Ignition hazard assessment
6 Assessment of possible ignition sources
7 Additional considerations
8 Verification and tests
9 Documentation and information for use
Annex A (normative) - Methodology for confirming the
category
Annex B (informative) - Explanation of the ignition hazard
assessment procedure
Annex C (informative) - Examples of ignition hazard
assessment
Annex D (informative) - Charging tests with non conductive
materials
Annex E (informative) - Example of rig for resistance to
impact test
Annex F (normative) - Rig for impact ignition test
Annex G (informative) - Consideration of misuse which can
reasonably be anticipated during ignition hazard
assessment procedure
Annex H (informative) - Significant changes between this
European Standard and the previous edition
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 94/9/EC
Bibliography
Covers the basic method and requirements for design, construction, testing and marking of non-electrical equipment intended for use in potentially explosive atmospheres in air of gas, vapour, mist and dusts.
| Committee |
EXL/23
|
| DevelopmentNote |
Supersedes 99/540224 DC (04/2002) Supersedes 07/30160767 DC. (02/2009)
|
| DocumentType |
Standard
|
| Pages |
76
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 13463-1:2009 | Identical |
| SN EN 13463-1 : 2009 | Identical |
| UNI EN 13463-1 : 2009 | Identical |
| NEN EN 13463-1 : 2009 | Identical |
| NF EN 13463-1 : 2009 | Identical |
| NS EN 13463-1 : 2009 | Identical |
| I.S. EN 13463-1:2009 | Identical |
| DIN EN 13463-1:2009-07 | Identical |
| NBN EN 13463-1 : 2009 | Identical |
| UNE-EN 13463-1:2011 | Identical |
| 12/30258579 DC : 0 | BS 5908-1 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 1: CODE OF PRACTICE FOR PRECAUTIONS AGAINST FIRE AND EXPLOSION IN CHEMICAL PLANTS, CHEMICAL STORAGE AND SIMILAR PREMISES |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| EI SAFE HANDLING STORAGE BIOMASS TPS : 1ED 2016 | SAFE HANDLING AND STORAGE OF BIOMASS IN THERMAL POWER STATIONS |
| BS 7861-1:2007 | Strata reinforcement support system components used in coal mines Specification for rockbolting |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| 07/30163374 DC : DRAFT MAR 2007 | BS 7861-1 - STRATA REINFORCEMENT SUPPORT SYSTEM COMPONENTS USED IN COAL MINES - PART 1: SPECIFICATION FOR ROCKBOLTING |
| BS 5908-1:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises |
| EN 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| ISO 6507-4:2005 | Metallic materials Vickers hardness test Part 4: Tables of hardness values |
| EN 582:1993 | Thermal spraying - Determination of tensile adhesive strength |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 12874 : 2001 | FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
| EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
| EN 61241-1:2004/corrigendum Dec. 2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| EN 15198:2007 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| EN 13463-2:2004 | Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| IEC TR 60079-12:1978 | Electrical apparatus for explosive gas atmospheres - Part 12:Classification of mixtures of gases of vapours with air accordingto their maximum experimental safe gaps and minimum ignitingcurrents |
| EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
| IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.