CFR 29(PTS1900-1910) : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
Superseded date
16-12-2019
Superseded by
Publisher
Sorry this product is not available in your region.
1902 State plans for the development and enforcement
of State standards
1903 Inspections, citations and proposed penalties
1904 Recording and reporting occupational injuries and
illnesses
1905 Rules of practice for variances, limitations,
variations, tolerances, and exemptions under
the Williams-Steiger Occupational Safety and
Health Act of 1970
1906 Administration witnesses and documents in private
litigation [Reserved]
1908 Consultation agreements
1910 Occupational safety and health standards
Subject index for 29 CFR part 1910 - Occupational safety
and health standards
| DevelopmentNote |
Supersedes CGA SB 15. (03/2018)
|
| DocumentType |
Standard
|
| PublisherName |
Code of Federal Regulations
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ANSI/ASSE Z390.1 : 2006 : R2010 | ACCEPTED PRACTICES FOR HYDROGEN SULFIDE (H[2]S) TRAINING PROGRAMS |
| API PUBL 2510A : 1996 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| DOD-A-82720 Base Document:1982 | ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC) |
| IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
| SAE AIR1375D | Minimum Safety Requirements for Special Purpose Airline Ground Support Equipment |
| IEEE 1727-2013 | IEEE Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage |
| ASHRAE 41.11 : 2014 | METHODS FOR POWER MEASUREMENT |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| MIL-L-80277 Base Document:1989 | LATHES, PRECISION, TOOLROOM, VARIABLE SPEED, 11-INCH THROUGH 13-INCH |
| A-A-59335 Base Document:1999 | Saw, Band, Cutoff, Horizontal, and Combination Horizontal and Vertical |
| IEEE 487.3-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities |
| API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| UNE-ISO/TR 12885:2010 IN | Nanotechnologies. Health and safety practices in occupational settings relevant to nanotechnologies |
| NFPA 1581 : 2015 | FIRE DEPARTMENT INFECTION CONTROL PROGRAM |
| CAN/CSA-IEC 62443-2-1:17 | Industrial communication networks — Network and system security — Part 2-1: Establishing an industrial automation and control system security program (Adopted IEC 62443-2-1:2010, first edition, 2010-11) | Réseaux industriels de communication — Sécurité dans les réseaux et les systèmes — Partie 2-1 : Établissement d’un programme de sécurité pour les systèmes d’automatisation et de commande industrielles (norme IEC 62443-2-1:2010 adoptée, première édition, 2010-11) |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| MIL L 12039 : D | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
| API Q1 RUSSIAN : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY. |
| IEEE 3007.1 : 2010 | RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| API 13K REDLINE : 2011 | RECOMMENDED PRACTICE FOR CHEMICAL ANALYSIS OF BARITE |
| MIL-M-80141 Revision C:1987 | METALLIZING OUTFITS, POWDER-GUNS AND ACCESSORIES |
| MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
| ANSI B11.21 : 2006 | SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS |
| MIL-A-52940 Revision C:1987 | AEROSOL GENERATOR, NON-THERMAL, INSECTICIDE, ULTRA LOW VOLUME |
| MIL-PRF-46167 Revision D:2005 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC |
| MIL-C-24500 Revision A:1990 | CLOTH, DRAPERY, BUNK CURTAIN, SLIPCOVERS AND LABELS, FIRE RETARDANT |
| ANSI B11.3 : 2012 | SAFETY REQUIREMENTS FOR POWER PRESS BRAKES |
| AWS BRH:2007 | BRAZING HANDBOOK |
| ANSI/AWWA D107-16 ERR 1(CSV) | COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
| MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
| NFPA 1521 : 2015 | FIRE DEPARTMENT SAFETY OFFICER PROFESSIONAL QUALIFICATIONS |
| MIL-STD-1500 Revision C:2007 | Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition |
| API Q2 : 2011 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ANSI B11.12 : 2005 : R2010 | SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES |
| A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| ANSI B11.20 : 2004 : R2009 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
| API RP 2200 : 2015 | REPAIRING HAZARDOUS LIQUID PIPELINES |
| ANSI B11.6 : 2001 : R2012 | SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| API Q1 PORTUGUESE : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| MIL-T-45568 Revision G:1986 | TEST SET, TACHOMETER-DWELL |
| MIL-S-80271 Revision A:1992 | SHEARING MACHINE, METAL SQUARING MECHANICAL DRIVE |
| ASTM C 1217 : 2000 : R2006 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
| API STD 2015 : 2018 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| NFPA 1561 : 2014 | EMERGENCY SERVICES INCIDENT MANAGEMENT SYSTEM AND COMMAND SAFETY |
| IEEE 487.1-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation Equipment |
| API RP 2219 : 2016 | SAFE OPERATION OF VACUUM TRUCKS HANDLING FLAMMABLE AND COMBUSTIBLE LIQUIDS IN PETROLEUM SERVICE |
| AWS WHC4.08 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 8: CAST IRONS |
| NFPA 1006 : 2017 | TECHNICAL RESCUE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| AWS D1.4/D1.4M : 2011 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
| AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
| AWS WHC2.11 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 11: OXYFUEL GAS WELDING |
| AWS F1.3M : 2006 | A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT |
| AWS WHC2.09 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 9: ARC STUD WELDING |
| AWS A5.22 : 1995 | SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING |
| ASTM F 1022 : 2006 | Standard Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type (Withdrawn 2012) |
| IEEE 1578-2007 | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
| IEEE DRAFT 1493 : D8 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
| NF ISO 6966-2 : 2006 | AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ASCE/EWRI 12-13, 13-13, 14-13 : 2013 | STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE |
| NFPA 25 HANDBOOK : 2011 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK |
| AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ISO 10993-4:2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ASTM C 1217 : 2000 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
| NFPA 18A : 2017 | WATER ADDITIVES FOR FIRE CONTROL AND VAPOR MITIGATION |
| NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
| NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
| NFPA 79 : 2018 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| NFPA 1986 : 2017 | RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS |
| NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| NFPA 87 : 2018 | FLUID HEATERS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NETA ECS : 2015 | ELECTRICAL COMMISSIONING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| ANSI B11.18 : 2006 | SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL |
| UFC 3-430-02FA : Change 1 | UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
| A-A-59330 Base Document:1998 | Grinding Machine, Surface, Reciprocating-Table, Horizontal-Spindle, Power-Feed |
| UFC 4-021-01 : Change 1 | UNIFIED FACILITIES CRITERIA - DESIGN AND O&M;: MASS NOTIFICATION SYSTEMS |
| UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
| PIP PCECV001 : 2016 | GUIDELINES FOR APPLICATION OF CONTROL VALVES |
| A-A-59415 Base Document:1999 | Grinding Machine, Universal, Vertical-Spindle, Nontraversing Rotary Table, Computer Numerical Control (CNC) |
| MIL-DTL-32483 Base Document:2013 | Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
| PIP PIC001 : 2008 | PIPING AND INSTRUMENTATION DIAGRAM DOCUMENTATION CRITERIA |
| ASHRAE HDBK HVAC APPLICATIONS : 2015 | ASHRAE HANDBOOK - HVAC APPLICATIONS |
| UFC 4-150-02 : Change 5 | UNIFIED FACILITIES CRITERIA - DOCKSIDE UTILITIES FOR SHIP SERVICE |
| UFC 4-826-10 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE |
| MIL-STD-2148 Revision A:2016 | Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs |
| ASME BTH 1 : 2017 | DESIGN OF BELOW-THE-HOOK LIFTING DEVICES |
| PIP VESAC001 : 2016 | AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION) |
| MIL-P-80279 Base Document:1991 | PUNCHING, SHEARING, NOTCHING, AND COPING MACHINE, METAL, HYDRAULIC DRIVEN, FOUR STATION TYPE |
| MIL-P-80280 Base Document:1991 | PUNCHING, ANGLE AND BAR SHEARING MACHINE, METAL, HYDRAULICALLY DRIVEN, THREE STATION TYPE |
| UFC 4-133-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - AIR TRAFFIC CONTROL AND AIR OPERATIONS FACILITIES |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| A-A-59266 Base Document:1998 | Grinding Machine, Universal, Cylindrical, External, Center-Type |
| MIL-DTL-16036 Revision M:2013 | SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD |
| MIL-PRF-32335 Base Document:2010 | TRICON REFRIGERATED CONTAINER SYSTEM (TRCS) |
| FC 4-218-01F : 2015 | FACILITIES CRITERIA - AIR FORCE CRITERIA FOR PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION |
| SSPC-GUIDE 12 : 2016 | GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS |
| UFC 4-211-02 : 2012 | UNIFIED FACILITIES CRITERIA - AIRCRAFT CORROSION CONTROL AND PAINT FACILITIES |
| OO-S-256 Revision K:2012 | Sewing Machine, Industrial, General Specification for |
| IEEE 1654:2009 | RF PROTECTION OF PERSONNEL WORKING IN THE VICINITY OF WIRELESS COMMUNICATIONS ANTENNAS ATTACHED TO ELECTRIC POWER LINE STRUCTURES |
| FM 1950 : 2016 | SEISMIC SWAY BRACES FOR PIPE, TUBING AND CONDUIT |
| NFPA 67 : 2016 | GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS |
| MIL-DTL-24607 Revision B:2008 | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| ANSI B11.20 : 2004 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| AWS C5.2 : 2001 | RECOMMENDED PRACTICES FOR PLASMA ARC CUTTING AND GOUGING |
| MIL-STD-871 Revision C:2015 | Electro-Chemical Stripping of Inorganic Finishes |
| EM 385-1-1 : 20031103 | SAFETY - SAFETY AND HEALTH REQUIREMENTS |
| A-A-59412 Revision A:2013 | SWAGING MACHINE, ROTARY, FLOOR-MOUNTED |
| A-A-59332 Revision A:2013 | GRINDING MACHINE, CYLINDRICAL, EXTERNAL, CENTER-TYPE, COMPUTER NUMERICAL CONTROL (CNC) |
| A-A-52316 Revision C:2010 | TESTER, CONSTRUCTION MATERIALS, MOISTURE & DENSITY (TCMMD) |
| NFPA 1971:2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
| NFPA 1851 : 2014 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING |
| 15/30290736 DC : 0 | BS EN ISO 10993-4 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| AWS WHC2.13 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 13: SOLDERING |
| ISO/TS 20474-14:2008 | Earth-moving machinery Safety Part 14: Information on national and regional provisions |
| MIL-B-45857 Revision C:1985 | BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY) |
| MIL HDBK 1025/10 : 0 | SAFETY OF ELECTRICAL TRANSMISSION AND DISTRIBUTION SYSTEMS |
| UFC 3-560-01 : Change 1 | UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY |
| CSA Z12885 : 2012 | NANOTECHNOLOGIES - EXPOSURE CONTROL PROGRAM FOR ENGINEERED NANOMATERIALS IN OCCUPATIONAL SETTINGS |
| AWWA M3 : 7 | SAFETY MANAGEMENT FOR UTILITIES |
| SAE ARP5140A | Design Criteria for Lifts Used to Board Passengers with Mobility Impairments onto Aircraft with Doorsill Heights of 144 in or Less |
| NFPA 430 : 2004 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
| MIL-PRF-12039 Revision D:1990 | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
| API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
| ANSI/ASSE Z390.1 : 2006 | ACCEPTED PRACTICES FOR HYDROGEN SULFIDE (H[2]S) TRAINING PROGRAMS |
| SAE AMS 3185 : 1999 | HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE |
| AAMI TIR67 : 2018 | PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES |
| ANSI B11.8:2001(R2007) | SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| CSA Z731 : 2003 | EMERGENCY PREPAREDNESS AND RESPONSE |
| MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
| SAE ARP1328C | Aircraft Ground Support Equipment - Wind Stability Determination |
| AWS WHC2.15 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 15: ARC CUTTING AND GOUGING |
| NFPA 471 : 2002 | RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
| API 13K :2011 | RECOMMENDED PRACTICE FOR CHEMICAL ANALYSIS OF BARITE |
| NFPA 1404 : 2018 | FIRE SERVICE RESPIRATORY PROTECTION TRAINING |
| AWS WHC4.06 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 6: CLAD AND DISSIMILAR METALS |
| NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| NFPA 600 : 2015 | INDUSTRIAL FIRE BRIGADES |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| AWS WHC2.04 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 4: GAS METAL ARC WELDING |
| NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
| ANSI E1.23 : 2010(R2015) | ENTERTAINMENT TECHNOLOGY - DESIGN AND EXECUTION OF THEATRICAL FOG EFFECTS |
| AWWA C218 : 2016 | LIQUID COATINGS FOR ABOVEGROUND STEEL WATER PIPE AND FITTINGS |
| ANSI B11.2 : 2013 | SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES |
| ANSI/ASSE A10.19 : 2008 | SAFETY REQUIREMENTS FOR PILE INSTALLATION AND EXTRACTION OPERATIONS |
| ANSI B165.1 : 2013 | POWER TOOLS - POWER-DRIVEN BRUSHING TOOLS - SAFETY REQUIREMENTS FOR DESIGN, CARE, AND USE |
| ISO/TR 18637:2016 | Nanotechnologies Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs) |
| ACI 371R : 2016 | GUIDE FOR THE ANALYSIS, DESIGN, AND CONSTRUCTION OF ELEVATED CONCRETE AND COMPOSITE STEEL-CONCRETE WATER STORAGE TANKS |
| EG 202 518 : 1.4.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); ACOUSTIC OUTPUT OF TERMINAL EQUIPMENT; MAXIMUM LEVELS AND TEST METHODOLOGY FOR VARIOUS APPLICATIONS |
| ASTM F 1818 : 2015 : REDLINE | Standard Specification for Foot Protection for Chainsaw Users |
| NFPA 1992 : 2018 | LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES |
| ASTM F 3284 : 2018 | Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry |
| ASTM E 2601 : 2015 : REDLINE | Standard Practice for Radiological Emergency Response |
| ASTM F 2318 : 2015 | Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2024) |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| NASA MSFC PROC 3687 : 2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.10 : 2003 : R2009 | SAFETY REQUIREMENTS FOR METAL SAWING MACHINES |
| NFPA 1 : 2021 | FIRE CODE |
| ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
| ANSI B11.10 : 2003 : R2015 | SAFETY REQUIREMENTS FOR METAL SAWING MACHINES |
| I.S. EN 60601-2-33:2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ANSI B11.18 : 2006 : R2012 | SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL |
| ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| UFC 4-440-01 : 2014 | UNIFIED FACILITIES CRITERIA - WAREHOUSES AND STORAGE FACILITIES |
| UFC 4-211-01 : Change 1 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
| UFC 3-410-04N : 2004 | UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION |
| NEMA SG 10 : 2013 | GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V |
| PIA C 7219 : C | CLOTH, DUCK, NYLON |
| NEMA ABP 8:2016 | Avoid Arc-Flash Occurrences by Following Industry Standards |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| UFC 1-201-01 : 2013 | UNIFIED FACILITIES CRITERIA - NON-PERMANENT DOD FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
| PIP VESV1002 : 2012 | DESIGN AND FABRICATION SPECIFICATION FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| SAE AIR5690 | Considerations for the Carriage and Use of Visual Distress Signals in Airline Overwater Survival Kits |
| ANSI/ASSE A10.25 : 2009 | SANITATION IN CONSTRUCTION |
| NFPA 434 : 2002 | CODE FOR THE STORAGE OF PESTICIDES |
| SAE ARP 1796 : 2015 | ENGINE BLEED AIR SYSTEMS FOR AIRCRAFT |
| UFC 4-133-01N : Change 5 | UNIFIED FACILITIES CRITERIA - NAVY AIR TRAFFIC CONTROL FACILITIES |
| ACI 503R : 1993 | USE OF EPOXY COMPOUNDS WITH CONCRETE |
| AWS WHC2.10 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 10: ELECTROSLAG WELDING |
| BS EN ISO 10993-4:2017 | Biological evaluation of medical devices Selection of tests for interactions with blood |
| API 2221 : 2011 | CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| ASTM F 2088 : 2015 : REDLINE | Standard Consumer Safety Specification for Infant Swings |
| 06/30157246 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT |
| MIL-M-80255 Revision B:1990 | MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC) |
| UFC 3-301-01 : Change 3 | UNIFIED FACILITIES CRITERIA - STRUCTURAL ENGINEERING |
| MIL-DTL-31011 Revision B:2005 | CLOTH, WATERPROOF AND MOISTURE VAPOR PERMEABLE |
| ANSI Z245.1 : 2017 | MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT |
| OO-J-571 Revision F:2015 | JOINTERS, WOODWORKING |
| MIL-STD-1504 Revision C:2007 | ABRASIVE BLASTING |
| MIL-A-45016 Revision C:1985 | ALIGNMENT SERVICE UNIT MOTOR VEHICLE WITH FRAME STRAIGHTENING AND ALIGNMENT CAPABILITIES |
| API 68 : 1998 : R2010 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| MIL-L-23251 Revision E:1989 | LATHES, ENGINE AND TOOLROOM 2516 AND 3220 |
| ANSI B11.15 : 2001 : R2007 | SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| A-A-59285 Base Document:1999 | Saws, Power, Hack |
| A-A-59334 Base Document:1999 | Lathe, Engine (Standard) and Toolroom (Precision), Horizontal Spindle |
| MIL-PRF-80034 Revision D:2015 | SAWS, JIG, WOODWORKING |
| SAE AIR6284 | Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants |
| ISO 13577-1:2016 | Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
| A-A-59384 Revision B:2014 | PRESS, 'H' FRAME, HYDRAULIC |
| ANSI B11.15 : 2001 : R2012 | SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES |
| NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
| NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
| ANSI Z245.41 : 2015 | FACILITIES FOR THE PROCESSING OF COMMINGLED RECYCLABLE MATERIALS - SAFETY REQUIREMENTS |
| IEEE C37.20.6-2015 REDLINE | IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures |
| SAE AS6449C | Solid Film Lubricant |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| NFPA 1401 : 2017 | RECOMMENDED PRACTICE FOR FIRE SERVICE TRAINING REPORTS AND RECORDS |
| IEC 62443-2-1:2010 | Industrial communication networks - Network and system security - Part 2-1: Establishing an industrial automation and control system security program |
| NFPA 1026 : 2018 | INCIDENT MANAGEMENT PERSONNEL PROFESSIONAL QUALIFICATIONS |
| NFPA 471 SPANISH : 2002 | RECOMMENDED PRACTICE FOR RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
| NFPA 1081 : 2018 | FACILITY FIRE BRIGADE MEMBER PROFESSIONAL QUALIFICATIONS |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
| AWS C7.2M : 2010 | RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
| NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
| AWS C5.7 : 2000 | RECOMMENDED PRACTICES FOR ELECTROGAS WELDING |
| SAE J2910_201404 | Recommended Practice for the Design and Test of Hybrid Electric and Electric Trucks and Buses for Electrical Safety |
| AWS WHC2.03 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 3: GAS TUNGSTEN ARC WELDING |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| IEEE 1491-2012 REDLINE | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| ANSI/ASSE Z390.1 : 2006 | ACCEPTED PRACTICES FOR HYDROGEN SULFIDE (H[2]S) TRAINING PROGRAMS |
| ACI 370R : 2014 | REPORT FOR THE DESIGN OF CONCRETE STRUCTURES FOR BLAST EFFECTS |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| ANSI/ASSP Z244.1:2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
| ANSI/ASSE A1264.1 : 2007 | SAFETY REQUIREMENTS FOR WORKPLACE WALKING/WORKING SURFACES AND THEIR ACCESS - WORKPLACE, FLOOR, WALL AND ROOF OPENINGS - STAIRS AND GUARDRAIL/HANDRAIL SYSTEMS |
| ANSI/ASSE A1264.1 : 2007 | SAFETY REQUIREMENTS FOR WORKPLACE WALKING/WORKING SURFACES AND THEIR ACCESS - WORKPLACE, FLOOR, WALL AND ROOF OPENINGS - STAIRS AND GUARDRAIL/HANDRAIL SYSTEMS |
| NFPA 1720 : 2014 | ORGANIZATION AND DEPLOYMENT OF FIRE SUPPRESSION OPERATIONS, EMERGENCY MEDICAL OPERATIONS, AND SPECIAL OPERATIONS TO THE PUBLIC BY VOLUNTEER FIRE DEPARTMENTS |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| ASTM E 2733 : 2010 : R2015 | Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems |
| ASTM C 1217 : 2000 : R2012 | Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| NSF 49 : 2016 | BIOSAFETY CABINETRY: DESIGN, CONSTRUCTION, PERFORMANCE, AND FIELD CERTIFICATION |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
| NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| NASA STD 8739.6 : 2016 | IMPLEMENTATION REQUIREMENTS FOR NASA WORKMANSHIP STANDARDS |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| NASA SSTD 8070 0138 : 2015 | ARC FLASH STANDARD |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA STD 8719.9 : 2015 | LIFTING STANDARD |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| ASHRAE GUIDELINE 21 : 2012 | VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
| NASA SSTD 8070 0081 : 2001 | FACILITY ELECTRICAL STANDARD |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| NASA STD 5008A : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| NASA MSFC SPEC 3686 : A2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| API RP 652 : 2020 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| ANSI E1.32 : 2012(R2017) | GUIDE FOR THE INSPECTION OF ENTERTAINMENT INDUSTRY INCANDESCENT LAMP LUMINAIRES |
| MIL-PRF-32566 Base Document:2016 | ENERGY-ATTENUATING FLOOR MATS FOR USE IN U.S. MILITARY GROUND VEHICLES |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| BS ISO 27471:2012 | Aircraft ground equipment. Upper deck loader. Functional requirements |
| SAE ARP5058B | Enclosed Operator’s Cabin for Aircraft Ground Deicing Equipment |
| PD ISO/TR 18637:2016 | Nanotechnologies. Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs) |
| IEEE N42.46-2008 | American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening |
| API RP 1646 : 2017 | SAFE WORKING PRACTICES FOR CONTRACTORS WORKING AT RETAIL PETROLEUM/CONVENIENCE FACILITIES |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| A-A-59918 Revision B:2014 | SELF PROPELLED CONCRETE SAW (SPCS) |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| UFC 1-202-01 : 2013 | UNIFIED FACILITIES CRITERIA - HOST NATION FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
| MIL-P-52405 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER) |
| MIL-L-23400 Revision E:1986 | LATHES, ENGINE AND TOOL ROOM, 16, 20 AND 25 INCH 7-1/2 TO 15 HP |
| MIL-L-23249 Revision D:1984 | LATHES, ENGINE AND TOOL ROOM 13 THRU 17 INCH |
| NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
| AWS WHC4.04 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 4: TOOL AND DIE STEELS |
| NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
| IEEE 487.2-2013 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems |
| CEMA SBP-001 : 2004 | DESIGN AND SAFE APPLICATION OF CONVEYOR CROSSOVERS FOR UNIT HANDLING CONVEYORS |
| MIL-P-80054 Revision D:1988 | PUNCHING MACHINE, METAL, TURRET TYPE, NUMERICALLY CONTROLLED |
| UFC 3-810-01N : Change 1 | UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS ENVIRONMENTAL ENGINEERING FOR FACILITY CONSTRUCTION |
| 14/30279065 DC : 0 | BS EN ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| MIL-S-52881 Revision B:1989 | SERVICING UNITS, COMPRESSED GAS, MOBILE |
| MIL-S-24036 Revision E:1989 | SAWS, BAND, CUTOFF, HORIZONTAL, NON-ADJUSTABLE & ADJUSTABLE CUTTING ANGLE |
| MIL-P-80276 Base Document:1988 | PRESS BRAKES, HYDRAULICALLY OPERATED, SHEET AND PLATE, COMPUTER NUMERICALLY CONTROLLED (CNC) |
| MIL-STD-2197 Revision A:2012 | BRUSH ELECTROPLATING ON MARINE MACHINERY |
| API RP 13K : 2011(R2016) | RECOMMENDED PRACTICE FOR CHEMICAL ANALYSIS OF BARITE |
| MIL-E-22200-5 Revision C:1984 | ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN, LOW-ALLOY STEEL FOR HARDENING AND TEMPERING HEAT TREATMENT APPLICATIONS ONLY |
| MIL-G-26869 Revision D:1989 | GROOVING MACHINE, SHEET METAL, SINGLE LOCK AND PITTSBURGH SEAMS, ELECTRIC MOTOR DRIVEN, FLOOR MOUNTED |
| MIL-P-80172 Revision C:1988 | PUNCHING MACHINE, METAL SINGLE END TYPE, NUMERICALLY CONTROLLED |
| ANSI B11.8:2001(R2012) | SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| ANSI B11.12 : 2005 : R2015 | SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES |
| ANSI B11.6 : 2001 : R2007 | SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| API 2220 : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| NFPA 1852 : 2013 | SELECTION, CARE, AND MAINTENANCE OF OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) |
| MIL-PRF-83779 Revision C:2013 | WATER INDICATING PASTE |
| TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
| FAA 3900.65 : 2014 | FLIGHT STANDARDS SERVICE (AFS) FALL PROTECTION PROGRAM (FPP) |
| NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| API 681 : 1996 : R2010 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API RP 615 : 2016 | VALVE SELECTION GUIDE |
| NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
| API 681 : 1996 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| SAE ARP5141A | Chassis Mounted Lifts Used to Board Airline Passengers With Mobility Impairments |
| NFPA 1582 : 2018 | COMPREHENSIVE OCCUPATIONAL MEDICAL PROGRAM FOR FIRE DEPARTMENTS |
| ASTM D 3687 : 2007 | Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| API 510 CHINESE : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| SAE ARP1247E | Aircraft Ground Support Equipment – General Requirements |
| API 100-2 : 2015 | MANAGING ENVIRONMENTAL ASPECTS ASSOCIATED WITH EXPLORATION AND PRODUCTION OPERATIONS INCLUDING HYDRAULIC FRACTURING |
| API Q1 SPANISH : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| IEEE C57.125-2015 | IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors |
| ANSI/ASSE A10.48 : 2016 | CRITERIA FOR SAFETY PRACTICES WITH THE CONSTRUCTION, DEMOLITION, MODIFICATION AND MAINTENANCE OF COMMUNICATION STRUCTURES |
| AWS WHC4.05 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 5: STAINLESS AND HEAT-RESISTANT STEELS |
| AWS WHC2.07 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 7: PLASMA ARC WELDING |
| NFPA 1710 : 2016 | ORGANIZATION AND DEPLOYMENT OF FIRE SUPPRESSION OPERATIONS, EMERGENCY MEDICAL OPERATIONS, AND SPECIAL OPERATIONS TO THE PUBLIC BY CAREER FIRE DEPARTMENTS |
| ANSI A10.24 : 2014 | ROOFING - SAFETY REQUIREMENTS FOR LOW-SLOPED ROOFS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| SAE AIR4766/2 | Airborne Chemicals in Aircraft Cabins |
| NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
| ASTM D 3698 : 2004 : R2010 | Standard Practice for Solvent Vapor Degreasing Operations |
| ASTM D 3687 : 2007 : R2012 | Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ASTM F 2319 : 2004 | Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) |
| ASTM D 3698 : 2004 | Standard Practice for Solvent Vapor Degreasing Operations |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 650 : 2013+ADD 3 : 2018 | WELDED TANKS FOR OIL STORAGE |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| 13/30277685 DC : 0 | BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| IEC 60601-2-33:2010+AMD1:2013+AMD2:2015 CSV | Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| AAMI ISO 10993-4 : 2002 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| BS EN 60601-2-33 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| ASHRAE/ASHE 189.3 : 2017 | DESIGN, CONSTRUCTION, AND OPERATION OF SUSTAINABLE HIGH-PERFORMANCE HEALTH CARE FACILITIES |
| ANSI E1.39 : 2015 | ENTERTAINMENT TECHNOLOGY - SELECTION AND USE OF PERSONAL FALL ARREST SYSTEMS ON PORTABLE STRUCTURES USED IN THE ENTERTAINMENT INDUSTRY |
| API 650 CHINESE : 2013 | WELDED TANKS FOR OIL STORAGE |
| API Q2 PORTUGUESE : 2011 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| API 652 CHINESE : 2014 | LINING OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| FAA 3900.69 : 2016 | FLIGHT STANDARDS SERVICE AIRCRAFT ACCIDENT INVESTIGATION SAFETY PROGRAM |
| ANSI/ASSE Z390.1 : 2006 : R2010 | ACCEPTED PRACTICES FOR HYDROGEN SULFIDE (H[2]S) TRAINING PROGRAMS |
| OO-S-236 Revision E:2015 | Saw, Circular, Table Type, Woodworking, Single Tilting Arbor, Floor Mounted |
| MIL-PRF-43001 Revision G:2016 | WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL |
| 13/30263819 DC : 0 | BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| API RP 2026 : 2017 | SAFE ACCESS/EGRESS INVOLVING FLOATING ROOFS OF STORAGE TANKS IN PETROLEUM SERVICE |
| MIL-L-80007 Revision E:1989 | LATHES, TOOLROOM, 11-INCH THROUGH 13-INCH |
| SAE ARP 1051 : 2016 | FORMAT, TEXT, AND NUMBERING SYSTEM FOR PREPARING SPECIFICATIONS COVERING CIVIL AIRCRAFT GROUND SUPPORT EQUIPMENT |
| API RP 68 : 1998 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 2510A : 1996 : R2015 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| API 2510A : 1996 : R2010 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
| MIL-DTL-5020 Revision F:2015 | Liquid, Compass, Aircraft |
| API 756 : 2014 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT TENTS |
| API Q1 CHINESE : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| SAE ARP5818A | Aircraft Refueling Vehicle Design and Performance Requirements |
| MIL-DTL-18001 Revision L:2013 | ANODES, SACRIFICIAL ZINC ALLOY |
| MIL-DTL-24779 Revision D:2015 | ANODES, SACRIFICIAL, ALUMINUM ALLOY |
| BS ISO 6966-2:2014 | Aircraft ground equipment. Basic requirements Safety requirements |
| API SPEC 12P : 2016 | SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS |
| MIL-HDBK-1024-1 Base Document:1994 | AVIATION OPERATIONAL AND SUPPORT FACILITIES |
| NFPA 1915 : 2000 | FIRE APPARATUS PREVENTIVE MAINTENANCE PROGRAM |
| API 580 : 2016 | RISK-BASED INSPECTION |
| MIL-F-80089 Revision B:1986 | FURNACES, HEAT-TREATING, GAS-FIRED, BOX-TYPE, DIRECT-FIRED AND FULL-MUFFLE DESIGN |
| AAMI RD5 : 2003 | HEMODIALYSIS SYSTEMS |
| API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
| UFC 3-601-02 : 2010 | UNIFIED FACILITIES CRITERIA - OPERATIONS AND MAINTENANCE: INSPECTION, TESTING, AND MAINTENANCE OF FIRE PROTECTION SYSTEMS |
| AWS WHC2.05 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 5: FLUX CORED ARC WELDING |
| API 2220 CHINESE : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| API 98 : 2013 | PERSONAL PROTECTIVE EQUIPMENT SELECTION FOR OIL SPILL RESPONDERS |
| MIL-PRF-80095 Revision E:2015 | SAWS, BAND, WOODWORKING |
| AWS C2.23M/C2.23 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| MIL-L-13896 Revision E:1987 | LATHES, ENGINE, GAP, SLIDING BED AND REMOVABLE BLOCK |
| MIL-STD-1501 Revision F:2011 | Chromium Plating, Low Embrittlement, Electrodeposition |
| CSA Z12885 : 2012 : R2017 | NANOTECHNOLOGIES - EXPOSURE CONTROL PROGRAM FOR ENGINEERED NANOMATERIALS IN OCCUPATIONAL SETTINGS |
| CSA Z731 : 2003 : R2014 | EMERGENCY PREPAREDNESS AND RESPONSE |
| MIL-F-80069 Revision D:1989 | FLARING, FLANGING, AND BEADING MACHINES, TUBE |
| API Q2 RUSSIAN : 2014 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ANSI/ASSE Z244.1 : 2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
| AWS C5.3 : 2000 | RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING |
| MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
| MIL-S-80224 Revision A:1989 | SHEARING MACHINE, METAL NOTCHING, POWER DRIVEN |
| NFPA 424 : 2013 | GUIDE FOR AIRPORT/COMMUNITY EMERGENCY PLANNING |
| SAE AS 4775 : 2017 | AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
| ANSI B11.20 : 2004 : R2015 | SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS |
| ANSI B11.21 : 2006 : R2012 | SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS |
| API 625 : 2010 | TANK SYSTEMS FOR REFRIGERATED LIQUEFIED GAS STORAGE |
| API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API 13K RUSSIAN : 2011 | RECOMMENDED PRACTICE FOR CHEMICAL ANALYSIS OF BARITE |
| ANSI A10.44 : 2014 | CONTROL OF ENERGY SOURCES (LOCKOUT/TAGOUT) FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
| IEEE/ANSI N42.41-2007 | American National Standard Minimum Performance Criteria for Active Interrogation Systems Used for Homeland Security |
| NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
| AWS C5.4 : 1993 | RECOMMENDED PRACTICES FOR STUD WELDING |
| AWS WHC4.07 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 7: SURFACING MATERIALS |
| AWS WHC2.02 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 2: SHIELDED METAL ARC WELDING |
| AWS WHC2.14 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 14: OXYGEN CUTTING |
| IEEE 515.1-2012 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
| ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
| ASTM E 2733 : 2010 | Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems |
| FAA AC 150/5210-15 : 2008 | AIRPORT RESCUE AND FIREFIGHTING STATION BUILDING DESIGN |
| SAE ARP292C | Environmental Control Systems for Helicopters |
| ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| ASTM E 2889 : 2012 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM D 3698 : 2004 : R2015 | Standard Practice for Solvent Vapor Degreasing Operations |
| ASTM D 4599 : 2014 : REDLINE | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 575 CHINESE : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| SAE AIR 4766/1 : 2011 | AIR QUALITY FOR COMMERCIAL AIRCRAFT CABIN - PARTICULATE CONTAMINANTS |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| ISO 27471:2012 | Aircraft ground equipment — Upper deck loader — Functional requirements |
| ASTM E 2169 : 2017 : REDLINE | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM E 2345 : 2004 | Standard Practice for Investigating Electrical Incidents (Withdrawn 2004) |
| NFPA 1 : 2018 | FIRE CODE |
| API SPEC Q2 : 2011+ADD 1 : 2016 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| EN 60601-2-33:2010/A12:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| PIP ARC01015 : 2014 | ARCHITECTURAL AND BUILDING UTILITIES DESIGN CRITERIA |
| PIP VESBI002 : 2017 | DESIGN AND FABRICATION OF BULK SOLIDS PRODUCT CONTAINERS |
| ASME STP-NU-015 : 2008 | A GUIDE TO AMERICAN CRANE STANDARDS FOR ELECTRIC OVERHEAD TRAVELING CRANES, HOISTS, AND RELATED EQUIPMENT FOR NUCLEAR FACILITIES |
| IEEE 45-5 : 2014 | ELECTRICAL INSTALLATIONS ON SHIPBOARD - SAFETY CONSIDERATIONS |
| PIP RESP73V : 2015 | APPLICATION OF ASME B73.2 - 2003-R2008 - SPECIFICATION FOR VERTICAL IN-LINE CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
| PIP STE05501 : 2017 | FIXED LADDERS AND CAGES DESIGN GUIDE |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
| PIP ELEGL02 : 2011 | ARC FLASH IMPLEMENTATION GUIDELINE |
| PIP PLC00005 : 2016 | DESIGN OF ASME B31.8 METALLIC PIPELINE SYSTEMS WITHIN FACILITIES |
| PIP STC01015 : 2017 | STRUCTURAL DESIGN CRITERIA |
| PIP VECBI001 : 2009 | SELECTION AND PURCHASE OF BULK SOLIDS PRODUCT CONTAINERS |
| PIP STF05511 : 2017 | FIXED INDUSTRIAL STAIRS |
| ASME STP-SA-055 : 2012 | GUIDE TO MOBILE CRANE STANDARDS |
| PIP VEFV1100M : 2017 | VESSEL/S&T HEAT EXCHANGER STANDARD DETAILS (METRIC UNITS) |
| PIP VESSP002 : 2014 | SUPPLEMENTAL DESIGN AND FABRICATION SPECIFICATION FOR SHELL AND PLATE HEAT EXCHANGERS - ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
| PIP VEFV1100 : 2017 | VESSEL/S&T HEAT EXCHANGER STANDARD DETAILS (U.S. CUSTOMARY UNITS) |
| PIP VESST002 : 2012 | SUPPLEMENTAL DESIGN AND FABRICATION SPECIFICATION FOR SHELL AND TUBE HEAT EXCHANGERS ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
| SSPC-AB 1 : 2015 | MINERAL AND SLAG ABRASIVES |
| PIP VESSM001 : 2017 | SPECIFICATION FOR SMALL PRESSURE VESSELS AND HEAT EXCHANGERS WITH LIMITED DESIGN CONDITIONS |
| PIP STF05501 : 2017 | FIXED LADDERS AND CAGES FABRICATION DETAILS |
| PIP PCCCV001 : 2016 | CONTROL VALVES SELECTION CRITERIA |
| PIP VECBI001 : 2009 : R2017 | SELECTION AND PURCHASE OF BULK SOLIDS PRODUCT CONTAINERS |
| PIP RESP003H : 2013 | SPECIFICATION FOR HIGH POWER HORIZONTAL CENTRIFUGAL PUMPS FOR WATER SERVICE |
| PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
| SSPC-CS 23.00 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| PIP PCSPS001 : 2015 | PACKAGED EQUIPMENT INSTRUMENTATION SPECIFICATION |
| PIP PCCCV002 : 2014 | PRESSURE REGULATORS SELECTION CRITERIA |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.