• There are no items in your cart

CSA N290.14 : 2015

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS

Available format(s)

Hardcopy , PDF

Superseded date

02-11-2020

Superseded by

CSA N290.14:15 (R2020)

Language(s)

English, French

Published date

01-01-2015

€798.62
Excluding VAT

Preface
0 Introduction
1 Scope
2 Reference publications
3 Definitions and abbreviations
4 Referenced requirements
5 General requirements
6 Qualification activities
7 Maintaining qualification
Annex A (normative) - Qualification concerns
Annex B (normative) - Mature product calculations
Annex C (informative) - Identification of digital items
Annex D (normative) - Acceptance of software engineering tools
Annex E (informative) - Candidate product system integration
        concerns and best practices

Specifies requirements for the process of qualification of digital hardware and software for use in instrumentation and control applications for NPPs.

DevelopmentNote
French Edition issued on 01-03-2017. (04/2017)
DocumentType
Standard
Pages
49
PublisherName
Canadian Standards Association
Status
Superseded
SupersededBy
Supersedes

CSA N290.4:19 Requirements for reactor control systems of nuclear power plants
N290.5-16 Requirements for electrical power and instrument air systems of CANDU nuclear power plants
CSA N290.0 & N290.1 PACKAGE : 2013 CONSISTS OF N290.0-11, GENERAL REQUIREMENTS FOR SAFETY SYSTEMS OF NUCLEAR POWER PLANTS AND N290.1-13, REQUIREMENTS FOR THE SHUTDOWN SYSTEMS OF NUCLEAR POWER PLANTS
CSAN290.4 : 2011 REQUIREMENTS FOR REACTOR CONTROL SYSTEMS OF NUCLEAR POWER PLANTS
CSA N290.7 : 2014 CYBER SECURITY FOR NUCLEAR POWER PLANTS AND SMALL REACTOR FACILITIES
N290.6-16 Requirements for monitoring and display of nuclear power plant safety functions in the event of an accident
CSA N286.7 : 2016 QUALITY ASSURANCE OF ANALYTICAL, SCIENTIFIC, AND DESIGN COMPUTER PROGRAMS
CSA N290.8 : 2015 TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS
IEEE 730-2014 IEEE Standard for Software Quality Assurance Processes
CSA N290.0 & N290.2 PACKAGE : 2017 CONSISTS OF N290.0-17, GENERAL REQUIREMENTS FOR SAFETY SYSTEMS OF NUCLEAR POWER PLANTS AND N290.2-17, REQUIREMENTS FOR EMERGENCY CORE COOLING SYSTEMS OF NUCLEAR POWER PLANTS

IEC 61025:2006 Fault tree analysis (FTA)
IPC A 600 : H ACCEPTABILITY OF PRINTED BOARDS
CSA N290.8 : 2015 TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS
ISO/IEC 25010:2011 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — System and software quality models
IEEE 828-2012 IEEE Standard for Configuration Management in Systems and Software Engineering
IEC 61226:2009 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
IEC 62138:2004 Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
IEEE 830-1998 IEEE Recommended Practice for Software Requirements Specifications
CSA N286.7 : 2016 QUALITY ASSURANCE OF ANALYTICAL, SCIENTIFIC, AND DESIGN COMPUTER PROGRAMS
CSA N290.12 : 2014 HUMAN FACTORS IN DESIGN FOR NUCLEAR POWER PLANTS
IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
IEC 60987:2007+AMD1:2013 CSV Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
ISO/IEC 14598-4:1999 Software engineering Product evaluation Part 4: Process for acquirers
IEC 62502:2010 Analysis techniques for dependability - Event tree analysis (ETA)
IPC A 610 : F ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC CM 770 : E COMPONENT MOUNTING GUIDELINES FOR PRINTED BOARDS
IPC 2221B:2012 GENERIC STANDARD ON PRINTED BOARD DESIGN
CSA Z299.0 : 1986 GUIDE FOR SELECTING AND IMPLEMENTING THE CAN3-Z299-85 QUALITY ASSURANCE PROGRAM STANDARDS
ISO/IEC 12207:2008 Systems and software engineering Software life cycle processes
IEC 60880:2006 Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions
ISO 9001:2015 Quality management systems — Requirements
IEEE 1012-2012 IEEE Standard for System and Software Verification and Validation
CSA Z299.4 : 1985 QUALITY ASSURANCE PROGRAM - CATEGORY 4
IPC 7711/21 : B REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES
IPC 2222 : A SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
IEC 61513:2011 Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
CSA Z299.2 : 1985 QUALITY ASSURANCE PROGRAM - CATEGORY 2
CSA N290.7 : 2014 CYBER SECURITY FOR NUCLEAR POWER PLANTS AND SMALL REACTOR FACILITIES
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC TR 61508-0:2005 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508)
ISO/IEC 90003:2014 Software engineering Guidelines for the application of ISO 9001:2008 to computer software
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
IEC 62566:2012 Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
CSA Z299.3 : 1985 QUALITY ASSURANCE PROGRAM - CATEGORY 3
CSA Z299.1 : 1985 QUALITY ASSURANCE PROGRAM - CATEGORY 1

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.