EN 45011:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
01-09-2012
18-02-1998
1 Scope
2 References
3 Definitions
4 Certification body
4.1 General provisions
4.2 Organization
4.3 Operations
4.4 Subcontracting
4.5 Quality system
4.6 Conditions and procedures for granting, maintaining,
extending, suspending and withdrawing certification
4.7 Internal audits and management review
4.8 Documentation
4.9 Records
4.10 Confidentiality
5 Certification body personnel
5.1 General
5.2 Qualification criteria
6 Changes in the certification requirements
7 Appeals, complaints and disputes
8 Application for certification
8.1 Information on the procedure
8.2 The application
9 Preparation for evaluation
10 Evaluation
11 Evaluation report
12 Decision on certification
13 Surveillance
14 Use of licences, certificates and marks of conformity
15 Complaints to suppliers
Annex ZA (normative) Normative references to international
publications with their relevant
European publications
This document specifies general requirements that a third party operating a product certification system shall meet if it is to be recognized as competent and reliable. In this document the term certification body is used to cover any body operating a product certification system. The word product is used in its widest sense and includes processes and services; the word standard is used to include other normative documents, specifications or technical regulations.
Committee |
CEN/CLC/JTC 1
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 45011 : 1998 | Corresponds |
BS EN 45011:1998 | Identical |
SN EN 45011 : 1998 | Identical |
NEN EN 45011 : 1998 | Identical |
BS 7511:1989 | Corresponds |
PN EN 45011 : 2000 | Identical |
NBN EN 45011 : 1998 | Identical |
ISO/IEC Guide 65:1996 | Identical |
UNE-EN 45011:1998 | Identical |
DIN EN 45011:1990-05 | Identical |
UNI CEI EN 45011 : 1999 | Corresponds |
NS EN 45011 : 2ED 1998 | Identical |
I.S. EN 45011:1998 | Identical |
UNI CEN/TS 13476-4 : 2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
EN 450-2:2005 | Fly ash for concrete - Part 2: Conformity evaluation |
CEN/TS 1456-2:2003 | Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
UNI EN 969 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
EN 12094-12:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices |
PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
EN 50090-8:2000 | Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products |
I.S. EN 15267-1:2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
EN 12094-16:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems |
ONORM EN 15267-1 : 2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity |
CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
UNI EN 15167-2 : 2006 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
CR 14245:2001 | Guidelines for the application of EN 197-2 "Conformity Evaluation" |
UNI EN 545 : 2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity |
CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
CEN/TR 15545:2006 | Guide to the use of EN 545 |
CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
EN 12094-4:2004 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
DD ENV 206:1992 | Concrete. Performance, production, placing and compliance criteria |
EN 15655:2009 | Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods |
EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
UNI EN 1916 : 2004 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
UNI EN 13616 : 2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
EN 12094-2:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
UNI CEN/TS 14632 : 2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITTY |
EN 12094-9:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors |
EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks - Part 1: General |
CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
PD CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity |
CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
ENV 1452-7:2000 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
EN 12094-10:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
CEN ISO/TS 25377:2007 | Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007) |
EN 50518-3:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
EN 15267-1:2009 | Air quality - Certification of automated measuring systems - Part 1: General principles |
PD CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity |
BS EN 805:2000 | Water supply. Requirements for systems and components outside buildings |
DD CEN/TS 13244-7:2003 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
PD CEN/TR 15545:2006 | Guide to the use of EN 545 |
UNI EN 15267-1 : 2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
EN 12094-3:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices |
EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 1: General |
CEN/TR 16017:2010 | Guide to the use of EN 598 |
EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
EN 12839:2012 | Precast concrete products - Elements for fences |
DIN EN 12094-8:2016-06 (Draft) | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
BS EN 12094-13:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves |
CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
BS EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
DIN EN 14525:2005-02 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
BS EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
BS EN 1917:2002 | Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
DIN EN 12094-11:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES |
BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
BS EN 12094-16:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for odorizing devices for CO<sub>2</sub> low pressure systems |
BS EN 12101-1 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS |
BS EN 1279-6:2002 | Glass in building. Insulating glass units Factory production control and periodic tests |
PD CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC) Guidance for the assessment of conformity |
DIN EN 12094-10:2003-09 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003 |
DIN EN 15655:2016-07 (Draft) | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
BS EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
DD ENV 1250-2:1995 | Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water |
BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
BS EN 1916:2002 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
BS EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General |
PD CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity |
DD CEN ISO/TS 25377:2007 | Hydrometric uncertainty guide |
DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
BS EN 12094-11:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for mechanical weighing devices |
DD ENV 1452-7:2001 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity |
DIN EN 12094-4:2004-10 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004 |
DD ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity |
CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity |
CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity |
DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
DIN EN 1917:2003-04 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
UNE-EN 50380:2003 | Datasheet and nameplate information for photovoltaic modules |
DIN EN 15267-1:2009-07 | Air quality - Certification of automated measuring systems - Part 1: General principles |
UNE-EN 12839:2012 | Precast concrete products - Elements for fences |
DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
DIN EN 12101-1:2006-06 | Smoke and heat control systems - Part 1: Specification for smoke barriers |
DIN EN 12094-9:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS |
DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
DIN EN 12094-6:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
DIN EN 14408-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL |
BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
DIN EN 545:2011-09 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity |
DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
CEN/TS 16214-2:2014 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance |
ISO 10381-1:2002 | Soil quality Sampling Part 1: Guidance on the design of sampling programmes |
DIN EN 969:2009-07 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
DIN EN 12094-5:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
PD CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
DIN EN 12094-3:2003-07 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES |
DD ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
BS EN 12839:2012 | Precast concrete products. Elements for fences |
DIN EN 681-1:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
DD ENV ISO 14907-1:2001 | Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures |
BS ISO 10381-1:2002 | Soil quality. Sampling Guidance on the design of sampling programmes |
PD CEN/TS 1329-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
DD ENV 1852-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
BS EN 13980:2002 | Potentially explosive atmospheres. Application of quality systems |
PD CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE) Guidance for the assessment of conformity |
DIN EN 12094-8:2006-07 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
BS EN 15267-1:2009 | Air quality. Certification of automated measuring systems General principles |
PD CEN/TR 16017:2010 | Guide to the use of EN 598 |
BS EN 3-6:1996 | Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 |
DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity |
BS EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks General |
BS EN 12094-3:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for manual triggering and stop devices |
BS EN 681-1:1996 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
BS EN 12094-9:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for special fire detectors |
BS EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
DD ENV 1329-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
PD CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
I.S. EN 14525:2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity |
DIN EN 12839:2012-03 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
BS EN 12094-12:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices |
BS EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
BS EN 1898:2001 | Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
UNE-CEN/TS 1555-7:2015 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
DIN EN 12094-2:2003-09 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices; German version EN 12094-2:2003 |
DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
BS EN 50090-8:2001 | Home and building electronic systems (HBES) Conformity assessment of products |
BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity |
UNE-EN 545:2011 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
BS 8404:2001 | Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for pharmaceutical products |
DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity |
BS EN 50518-3:2013 | Monitoring and alarm receiving centre Procedures and requirements for operation |
BS EN 450-2:2005 | Fly ash for concrete Conformity evaluation |
BS EN 15655:2009 | Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods |
DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity |
DD CEN/TS 1852-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
BS EN 12094-6:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical disable devices |
PD CEN/TS 16214-2:2014 | Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Conformity assessment including chain of custody and mass balance |
BS EN 12094-4:2004 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators |
BS EN 12094-5:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators |
DD CEN/TS 13476-4:2008 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
BS EN 12094-10:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pressure gauges and pressure switches |
BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
PD CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
DD ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity |
BS EN 12094-8:2006 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors |
BS EN 12094-7:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems |
DD CEN/TS 12200-2:2003 | Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
DIN EN 15189:2007-02 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
UNE-EN 50518-3:2013 | Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation |
DIN EN 450-2:2005-05 | Fly ash for concrete - Part 2: Conformity evaluation |
EN 12094-5:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
EN 12094-8:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
BS EN 50090-2-2 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
DIN ISO 10381-1:2003-08 | SOIL QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES |
DD CEN/TS 1555-7:2003 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
UNE-EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity |
ISO/TS 25377:2007 | Hydrometric uncertainty guidance (HUG) |
DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
BS EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks General |
DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
BS EN 13616:2004 | Overfill prevention devices for static tanks for liquid petroleum fuels |
PD CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
BS EN 12094-1:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices |
DD ENV 197-2:1996 | Cement Conformity evaluation |
BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
UNI EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
EN 12094-6:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
BS EN 12094-2:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices |
ISO 16003:2008 | Components for fire-extinguishing systems using gas— Requirements and test methods — Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves |
I.S. EN ISO 50090-08:2001 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 8: CONFORMITY ASSESSMENT OF PRODUCTS |
I.S. CWA 14172-2:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 2: CERTIFICATION AUTHORITY SERVICES AND PROCESSES |
ENV 1250-1:1994 | Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 1: Laboratory method for obtaining samples for analysis to measure losses by evaporation to air |
I.S. CEN TS 12201-7:2003 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. CEN TS 12200-2:2003 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
DIN V ENV 1452-7:2001-03 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 12839:2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
I.S. EN 50380:2017 | MARKING AND DOCUMENTATION REQUIREMENTS FOR PHOTOVOLTAIC MODULES |
I.S. CEN TS 1555-7:2003 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 12094-5:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS |
S.R. CEN/TS 1566-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
UNI CEN/TS 1455-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
S.R. CEN/TS 1555-7:2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 969:2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
EN 12094-11:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices |
S.R. CEN TR 16017:2010 | GUIDE TO THE USE OF EN 598 |
I.S. ENV 1250-2:1994 | WOOD PRESERVATIVES - METHODS OF MEASURING LOSSES OF ACTIVE INGREDIENTS AND OTHER PRESERVATIVE INGREDIENTS FROM TREATED TIMBER - PART 2: LABORATORY METHOD FOR OBTAINING SAMPLES FOR ANALYSIS TO MEASURE LOSSES BY LEACHING INTO WATER OR SYNTHETIC SEA WATER |
I.S. EN CWA 14172-5:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 5: SECURE SIGNATURE CREATION DEVICES |
I.S. CEN TS 1456-2:2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
ENV 1250-2:1994 | Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 2: Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water |
I.S. TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
S.R. CWA 15896-2:2008 | VALUE ADDED PURCHASING MANAGEMENT - PART 2: ACCREDITED STRUCTURE AND PROCESS FOR CERTIFICATION BODIES |
I.S. CWA 14172-7:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 7: CRYPTOGRAPHIC MODULES USED BY CERTIFICATION SERVICE PROVIDERS FOR SIGNING OPERATIONS AND KEY GENERATION SERVICES |
S.R. CEN/TS 16214-2:2014 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 2: CONFORMITY ASSESSMENT INCLUDING CHAIN OF CUSTODY AND MASS BALANCE |
S.R. CEN/TS 1455-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
DIN EN 13616:2004-09 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
I.S. CEN TS 12666-2:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
S.R. CEN/TS 14632:2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 15167-2:2007 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
I.S. CEN TS 13244-7:2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 12094-6:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES |
I.S. EN 50518-3:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION |
DIN EN 13980:2003-02 | POTENTIALLY EXPLOSIVE ATMOSPHERES - APPLICATION OF QUALITY SYSTEMS |
I.S. EN 13616:2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
I.S. EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
S.R. CEN TR 15840:2009 | EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2 |
S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
I.S. EN 1917:2002 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
I.S. ENV 1250-1:1994 | WOOD PRESERVATIVES - METHODS FOR MEASURING LOSSES OF ACTIVE INGREDIENTS AND OTHER PRESERVATIVE INGREDIENTS FROM TREATED TIMBER - PART 1: LABORATORY METHOD FOR OBTAINING SAMPLES FOR ANALYSIS TO MEASURE LOSSES BY EVAPORATION TO AIR |
DIN EN 14409-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
S.R. CEN/TS 1329-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 15655:2009 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
I.S. CWA 14172-1:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 1: GENERAL INTRODUCTION |
I.S. EN 13566-1:2003 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 1: GENERAL |
I.S. EN 1279-6:2002 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS |
UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
I.S. ENV 1452-7:2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. CWA 14172-8:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 8: TIME-STAMPING AUTHORITY SERVICES AND PROCESSES |
S.R. CEN/TS 1451-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
UNI CEN/TS 1566-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
I.S. EN 450-2:2005 | FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
I.S. CWA 14172-6:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 6: SIGNATURE-CREATION DEVICE SUPPORTING SIGNATURES OTHER THAN QUALIFIED |
S.R. CR 14245:2001 | GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION' |
I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TS 1565-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
S.R. CEN/TS 12666-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 14409-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
I.S. EN 50090-2-2:1998 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
I.S. CEN TS 14632:2006 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
PD CR 14245:2001 | Guidelines for the application of EN 197-2. Conformity Evaluation |
I.S. CWA 15554:2006 | SPECIFICATIONS FOR A WEB ACCESSIBILITY CONFORMITY ASSESSMENT SCHEME AND A WEB ACCESSIBILITY QUALITY MARK |
I.S. EN 14408-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL |
EN 13980:2002 | Potentially explosive atmospheres - Application of quality systems |
I.S. CEN ISO TS 14907-1:2005 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES |
I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
S.R. CEN/TS 1519-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
I.S. EN 545:2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
I.S. EN 12094-8:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
ISO 10011-1:1990 | Guidelines for auditing quality systems Part 1: Auditing |
ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
ISO/IEC Guide 23:1982 | Methods of indicating conformity with standards for third-party certification systems |
EN 30011-1 : 1993 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - AUDITING |
EN 45020:2006 | Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) |
ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
EN ISO 8402 : 1995 | QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY |
ISO/IEC Guide 28:2004 | Conformity assessment Guidance on a third-party certification system for products |
EN 45020 : 2006 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
ISO/IEC Guide 39:1988 | General requirements for the acceptance of inspection bodies |
ISO/IEC Guide 7:1994 | Guidelines for drafting of standards suitable for use for conformity assessment |
EN 45004 : 1995 | GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
ISO/IEC Guide 53:2005 | Conformity assessment Guidance on the use of an organization's quality management system in product certification |
EN 45001 : 1989 | GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.