EN 50272-2:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
Superseded date
01-05-2018
Superseded by
Published date
12-06-2001
Sorry this product is not available in your region.
1 Scope
2 Main applications
3 Normative references
4 General definitions
5 Protection against electric shock
6 Disconnection and separation
7 Prevention of short circuits and protection from other
effects of electric current
8 Provisions against explosion hazards
9 Provision against electrolyte hazard
10 Accommodation, housing
11 Charge current requirements
12 Identification labels, warning notices and instructions
for use, installation and maintenance
13 Transportation, storage, disposal and environmental
aspects
14 Inspection and monitoring
Annex A (informative) Charging methods, modes of operation
Annex B (informative) Calculation of safety distance to
protect against explosion hazards
This European Standard applies to stationary secondary batteries and battery installations with a maximum voltage of DC 1500 V (nominal) and describes the principal measures for protections against hazards generated from:-electricity,-gas emission,-electrolyte.It provides requirements on safety aspects associated with the erection, use, inspection, maintenance and disposal.It covers lead-acid and NiCd batteries.
| Committee |
CLC/TC 21X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 50272-2 : 2001 | Identical |
| I.S. EN 50272-2:2001 | Identical |
| CEI EN 50272-2 : 2002 | Identical |
| SN EN 50272-2 : 2001 | Identical |
| PN EN 50272-2 : 2007 | Identical |
| BS EN 50272-2:2001 | Identical |
| UNE-EN 50272-2:2002 | Identical |
| VDE 0510-2 : 2001 | Identical |
| NF EN 50272-2 : 2005 | Identical |
| NBN EN 50272-2 : 2001 | Identical |
| NEN EN 50272-2 : 2001 | Identical |
| BS EN 50171:2001 | Central power supply systems |
| DD CLC/TS 50535:2010 | Railway applications. Onboard auxiliary power converter systems |
| BS EN 50272-4:2007 | Safety requirements for secondary batteries and battery installations Batteries for use in portable appliances |
| PREN 50547 : DRAFT 2011 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| 13/30279579 DC : 0 | BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
| 08/30152055 DC : DRAFT APR 2008 | BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| CEI UNI EN 50518-1 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| 16/30347446 DC : 0 | BS EN 17064 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE |
| UNE-EN 50272-1:2011 | Safety requirements for secondary batteries and battery installations - Part 1: General safety information |
| 11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
| 17/30356593 DC : 0 | BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| 06/30157092 DC : 0 | ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY |
| UNE-EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| ISO/IEC TS 22237-4:2018 | Information technology Data centre facilities and infrastructures Part 4: Environmental control |
| S.R. HD 60364-4-42:2011 | LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS |
| I.S. EN 50547:2013 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| UNI CEI EN 50518-1 : 2014 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| S.R. HD 60364-5-56:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES |
| I.S. EN 50600-2-3:2014 | INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-3: ENVIRONMENTAL CONTROL |
| BS EN 50272-1:2010 | Safety requirements for secondary batteries and battery installations General safety information |
| BS EN 13243:2015 | Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| EN 50272-1:2010 | Safety requirements for secondary batteries and battery installations - Part 1: General safety information |
| EN 50272-4:2007 | Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances |
| HD 60364-4-42 : 2011 AMD 1 2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014) |
| EN 50600-2-3:2014 | Information technology - Data centre facilities and infrastructures - Part 2-3: Environmental control |
| EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| EN 50172:2004 | Emergency escape lighting systems |
| EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
| I.S. EN 50272-1:2010 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 1: GENERAL SAFETY INFORMATION |
| PREN 13243 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
| 04/30097421 DC : DRAFT APR 2004 | IEC 60950-1 ED.2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 50172:2004 | Emergency escape lighting systems |
| IEC 62928:2017 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| UNI EN ISO 15138 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| BS EN 50600-2-3:2014 | Information technology. Data centre facilities and infrastructures Environmental control |
| S.R. CLC/TS 50535:2010 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| CEI EN 50171 : 2002 | CENTRAL POWER SUPPLY SYSTEMS |
| EN IEC 62928:2018 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| UNE-EN 50518-1:2014 | Monitoring and alarm receiving centre - Part 1: Location and construction requirements |
| IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
| UNE-HD 60364-5-56:2010 | Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| I.S. EN 13243:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
| VDI/VDE 6008 Blatt 3:2014-01 | Barrier-free buildings - Aspects of electrical installation and building automation |
| BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| VDI 2050 Blatt 5:2010-10 | Requirements at technical equipment rooms - Electrical engineering |
| VDI 4705:2013-05 | Lifts - Emergency alarm management |
| CLC/TS 50535:2010 | Railway applications - Onboard auxiliary power converter systems |
| 11/30235301 DC : 0 | BS EN 50547 - RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| BS EN 50518-1:2013 | Monitoring and alarm receiving centre Location and construction requirements |
| I.S. HD 60364-4-42:2011 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS |
| 13/30277110 DC : 0 | BS EN 13243 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
| BS 5266-8(2004) : 2004 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| 13/30251809 DC : 0 | BS EN 50171 - CENTRAL SAFETY POWER SUPPLY SYSTEMS |
| BS ISO 21789:2009 | Gas turbine applications — Safety |
| PREN 50518 : DRAFT 2016 | MONITORING AND ALARM RECEIVING CENTRE |
| KTA 2103 : 2015 COR 2017 | EXPLOSION PROTECTION IN NUCLEAR POWER PLANTS WITH LIGHT WATER REACTORS (GENERAL AND CASE-SPECIFIC REQUIREMENTS) |
| I.S. EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| I.S. HD 60364-5-56:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES (IEC 60364-5-56:2009 (EQV)) |
| TR 102 532 : 1.2.1 | ENVIRONMENTAL ENGINEERING (EE); THE USE OF ALTERNATIVE ENERGY SOLUTIONS IN TELECOMMUNICATION INSTALLATIONS |
| I.S. EN 60079-14:2014 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION |
| I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
| ISO 19372:2015 | Microturbines applications — Safety |
| UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ASHRAE GUIDELINE 21 : 2012 | VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
| UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| VDE 0558-508 : 2001 | CENTRAL POWER SUPPLY SYSTEMS |
| CEI CLC/TS 50535 : 2011 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| BS EN 50547:2013 | Railway applications. Batteries for auxiliary power supply systems |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| CEI EN 50547 : 2014 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| PREN 50171 : DRAFT 2013 | CENTRAL SAFETY POWER SUPPLY SYSTEMS |
| CEI EN 50172 : 2006 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
| ISO 15138:2007 | Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning |
| EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
| PREN 17064 : DRAFT 2016 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE |
| I.S. EN 50172:2004 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| UNE-EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
| BS ISO 19372:2015 | Microturbines applications. Safety |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| 16/30299842 DC : 0 | BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE |
| CEI EN 50272-4 : 2007 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 4: BATTERIES FOR USE IN PORTABLE APPLIANCES |
| HD 60364-5-56:2010/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES |
| I.S. EN IEC 62928:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES |
| ISO 21789:2009 | Gas turbine applications — Safety |
| I.S. EN 50272-4:2007 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 4: BATTERIES FOR USE IN PORTABLE APPLIANCES |
| IEC 60364-4-42:2010+AMD1:2014 CSV | Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
| 12/30269297 DC : 0 | BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION |
| EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| EN 50171 : 2001 COR 2001 | CENTRAL POWER SUPPLY SYSTEMS |
| UNE-HD 60364-4-42:2014 | Low voltage electrical installations -- Part 4-42: Protection for safety - Protection against thermal effects |
| HD 384.4.41 S2:1996/A1:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK |
| EN 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells |
| HD 366 : 200S1 | CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO PROTECTION AGAINST ELECTRIC SHOCK |
| EN 61660-2:1997 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| HD 384.7.706 : 200S1 | ELECTRICAL INSTALLATIONS OF BUILDINGS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATION - RESTRICTIVE CONDUCTING LOCATIONS |
| HD 625.1 : 200S1 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS |
| IEC 60050-486:1991 | International Electrotechnical Vocabulary (IEV) - Part 486: Secondary cells and batteries |
| EN 60896-1:1991/A2:1992 | STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENTS AND METHODS OF TEST - VENTED TYPES |
| EN 50178:1997 | Electronic equipment for use in power installations |
| HD 384.4.43 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PROTECTION FOR SAFETY - CHAPTER 43: PROTECTION AGAINST OVERCURRENT |
| EN 166:2001 | Personal eye-protection - Specifications |
| EN 61660-1:1997 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC TR 60755:2008 | General requirements for residual current operated protective devices |
| IEC 61340-4-1:2003+AMD1:2015 CSV | Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
| EN 50091-1-2 : 98 COR 1 99 | |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| HD 384.5.54 : 200S1 | ELECTRICAL INSTALLATION OF BUILDINGS - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| HD 193 : 200S2 | VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS OF BUILDINGS |
| EN 60900:2012 | LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C. (IEC 60900:2012) |
| EN 345:1992/A1:1997 | SPECIFICATION FOR SAFETY FOOTWEAR FOR PROFESSIONAL USE |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 3864:1984 | Safety colours and safety signs |
| EN 60990:2016 | Methods of measurement of touch current and protective conductor current |
| EN 60896-2:1996 | Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.